Hello i own a brand new ulefone s8 pro bricked after ota update failure i donwloaded the rom from ulefone site and managed to flash it but still bootlooping for about 10 minute and then turning off , i did a donwload only + firmware upgrade and even a format all + download but still bootlooping , i tried to flash twrp but it wont and then tried unlocking bootloader but it failed im really desperate is it a really a software issue or it may be a hard one? Plz help me im begging you
Related
Hello everyone!
So I was trying to update SuperSU on my Honor 7, everything fine, the twrp installed succesfully and so the SuperSU, but now I am stuck in the android logo screen adter the honor one, and I tried to use unbrick option but.... I don't really understand how it works, can someone help me, please? It's an emergency I really need the phone asap.
Thanks.
Which SuperSu did you flash?
Hi everyone. My phone recently received a system update (A5000_S124_151118_8G_ROW_TO_A5000 S125_170112_8G_ROW). After downloading, a notice said that the device will reboot to install the new software. Phone reboots to recovery and after a few seconds in the process of installation, it stopped and said error.
Tried it a few times with the same result. I unroot the device thinking it could be the cause of the error. But it still didn't work. Will anyone help me figure this out?
Thank you.
Hi !
You must know that a rooted device and with a custom recovery can`t instal a OTA update , sometimes it doesn`t install and sometimes it bricks the device , your current status atm
Flash the stock firmware , check here https://forum.xda-developers.com/android/general/lenovo-a5000-root-recovery-roms-t3316677
Good luck !
Hi everybody,
Ive updated my Mate 9 to Android 8 by FF. I used an aproved update by imei. No bootloader open or rooted phone. just normal update.
Now when i boot, phone shows me the Huawei eRecovery and wants to download the lastest version but I dont know why. I try to download by wifi and says there is a problem...any ideas? That means its bricked?
Please help
Happened to me too in a different updating scenario. I unplugged from usb and booted into recovery. Wiped cache then factory reset phone and it was fixed.
Hi team,
My phone was on MHA-L09C432B198 and today I made a wrong update to -> MHA-L09C185B360(8.0.0.360)
My question is that i dont know which firmware install from HuaweiFunk to revert this...i tried MHA-L09 8.0.0.361(C432) but i gave me error...
Any ideas please?
Thanks,
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
MOnomono456 said:
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
Click to expand...
Click to collapse
If you installed a boot that was not for your phone. you've ruined broken memory
elcoya06 said:
If you installed a boot that was not for your phone. you've ruined broken memory
Click to expand...
Click to collapse
so it cant be fixed???
hello guys .. i am new on xda and i thank you all for being part of this site as i am very interested in knowing more and more aboit android . but lately i am having a very big issue with my samsung SM-A525F.
since the last update 12 ui4 my A52-4G stuck on boot logo and wont start, i try wipe cache and reinstalling stock firmware and it start doing bootloop . then i try downgrading to android 11 again , and still the same . i try every solution from the internet but problem still persist ... then i try repair app from recovery mode the phone pass the bootloop and now freeze at optimising apps and switch off and start the bootloop again . i try all firmware for the A52 .. but still the same . i flash via odin and still the same . and finally i browse the internet and see that many people having mostly same the same issue with the android 12 ui 4 update .
please can someone help me correct my phone software as its the only phone i have and i really like it . please help me if anyone have a solution as i cant access the phone because it didnt load the android since i have update to latest version 12 ui 4 and even after downgrading to 11 ui 4.. cannot install binary 3 or earlier . and i've checked and double checked the firmware before updating via odin all is good but still freeze and restart on optimising apps .. help please ..
That's hardware. I had that issue on an A50 and the motherboard went bad on it.