Hello all i have mate 8 l29c185 and i changed region to c432 and then i flashed a l29c432b584 on my phone and every was ok. But due to high battry consuption i wanted to downgrade my phone to marshhmelow then i flashed c500 rollback after that my phone comig up and then i flashed c432b330to my ohone with 3bottom way in Sd card. But after updating phone stack and nothing hasn't work either) it just whrite in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now". And aslo i can not power off the phone.i tryed to going my phone to fast mode and it went in fast mode .i tried a lot of firmware with uawei firmware extract to flash boot.img system.img recovert.img and cust.img via adb and etc.the flash process have been completed but in my phone nothinf happen and stay on Your device is booting now"... pleas help me.i tried firmware such az c432b330 c423b200 c432b584 c185b320 c185b560 ...i dont know what shuold i do..
My mail is;[email protected] plsead help me
No body can help me???????
silentflight288 said:
Hello all i have mate 8 l29c185 and i changed region to c432 and then i flashed a l29c432b584 on my phone and every was ok. But due to high battry consuption i wanted to downgrade my phone to marshhmelow then i flashed c500 rollback after that my phone comig up and then i flashed c432b330to my ohone with 3bottom way in Sd card. But after updating phone stack and nothing hasn't work either) it just whrite in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now". And aslo i can not power off the phone.i tryed to going my phone to fast mode and it went in fast mode .i tried a lot of firmware with uawei firmware extract to flash boot.img system.img recovert.img and cust.img via adb and etc.the flash process have been completed but in my phone nothinf happen and stay on Your device is booting now"... pleas help me.i tried firmware such az c432b330 c423b200 c432b584 c185b320 c185b560 ...i dont know what shuold i do..
My mail is;[email protected] plsead help me
Click to expand...
Click to collapse
try erecovery option or use multi-tool8 to unbrick
Related
hi guys i tryied to intsal twrp recovery to mine huawei p9 lite and i used srk tool but when its supposed to start the twrp tool i got stock on your device has been unlocked and cant be trusted now i cannot rebbot mine phone i tryed almost every possible way to turn off but it automaticli turn on nd go to this point when it gets stuck help me please its maybe bcs my phone its bricked?
I don't remember p9 lite 2017 having twrp.
Anyway, your phone is officially f**cked!
The only way to unbrick it is using the dload method. Use google
Hi guys im new here and have always followed along with rooting other phones but this time i kind of messed things up im stuck on your Device has been unlocked and cant be trusted and no other function works not fastboot and does not go into bootloader and 3 buttons not working either i have tried most of the stuff i have read but still no luck can any one help me..
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
yea buddy im stuck on the same boat but mine is MHA-L09 and at least your able to do that you can look for the adb fastboot method this can help you out im on my way out when i come back ill look for it so you can do it
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
MOnomono456 said:
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
Click to expand...
Click to collapse
If you installed a boot that was not for your phone. you've ruined broken memory
elcoya06 said:
If you installed a boot that was not for your phone. you've ruined broken memory
Click to expand...
Click to collapse
so it cant be fixed???
Hi,
My device,
Mtcd Mx
A-Media
Rk3188
Lollipop 5.1.1
i upgrade my Hu from 1.3 @hal9k to hal9k’s 7.1.2 nougat, everything went fine. Bootup successfuly. While looking settngs page “power off” warning came and after that restart it self, then stuck on nougat logo. Nothings happening just stuck. After i manage a sdcard with sd firmwaretool to downgrade 5.1.1 with stock 5.1.1 dupdate file. Hu stuck on lollipop boot logo no matter what i do.
Things that i tried
With @hal9k 7.1.2 bootable sdcard i can get into Nougat recovery menu, tried clean wipe cash, factory reset options and finally update again, there is no solution still stuck nougat logo.
With stock rom(5.1.1) bootable sdcard i cant get into lollipop recovery menu. Stuck on lollipop boot logo. Tried eject the sdcard as soon as possible when lollipop appears many time, doesnt work.
i never update dmcu, it is same as it was.
İ thing it is bricked, please ineed some advice, i m very sorry for beeing such despered
Edit: i apply this method to flash som with;
1- stock dupdate.img. Flshing succesful but stuck on boot again.
2- flash with sdupdate file of stock dupdate.img. Flashing succesfull but stuck on boot again.
Tried both files doesnt work. İ cant even get in recovery mode.
https://forum.xda-developers.com/and...h-som-t3766892
————
İ thing i need to try flash mcu and will buy a stlink adaptor. Try to flash mcu soon.
Any recommendation?
Edit2; (day2)
i can still get into recovery menu with hal9k 7.1.2 nougat sdcard,
But sdcard with stock rom still doesnt get into recovery mode.
------------------------------
Still there isnt any advice, waiting for your
edit3:
installed ubuntu to laptop
used rkflashkit and upgrade_tool
erase all nand partitions one by one with rkflashkit
lowformat by upgrade_tool
upgrade firmware by upgrade_tool
still no change on condition.
all succeed but on loader i get following error on ubuntu, but on windows didnt give error.
error was
[email protected]:~/utils$ sudo ./upgrade_tool ul loaderr.bin
[sudo] password for erhan:
Loading loader...
Loading loader failed!
Click to expand...
Click to collapse
but as i sad i use windows android tool for flash loader with no error.
is it hard bricked?
——————————————
Edit 4;
i flash the mcu by stlink method,
Success fully flashed mcu chip.
Conclution;
Nothing changed, it doesnt work no matter i do.
This is my last post about unbricking operation.
İ gave it to dealer this morning, they will send it repair. i will write the conclution.
will it live or die? Coming soon!
Many many thanks to everyone who read entire post
Vote your guess down here, will it came back to life or die and rest in peace
Need advice
Sadece_erhan said:
Need advice
Click to expand...
Click to collapse
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
marchnz said:
Would demanding it motivate others to help?
What have you tried and from reading the forums, identified what the options might be?
Click to expand...
Click to collapse
i dont understand why it always gets in recovery mode with the sdcard which already bricked the unit.
understandings from readings
it doesnt get into recovery mode because it stucks or something went wrong on previous update.
To get in recovery i remove som from board, prepare a cable with 10k and 20k resistors. measure 3.2v from cable. And attach the usb cable pins to som’s related pins. Pc recognise the som, run the rk tool app, load stock 5.1.1 rom. And click restore button, succeed the restore succesfully. Plug the som back to board, push the reset button. it stuck on boot lollipop logo again. İ i tried to restore both dupdate.img and sdupdate.img by one by. Doesnt work.
The only thing that work is the hal9k’s nougat 7.1.2 rom’s sdupdate.img. İt takes recovery menu, i can wipe data, wipe cash , update mcu and update firmware. (Update firmware option only updates nupdate 7.1.2 version which is stuck on boot logo again)
i will flash mcu tomorrow by stlink method. i think mcu is fine. it wont work again.
İ create sdcards with Rockchip Create Upgrade Disk Tool v1.46 (SDBOOT 2.12)
update,
remove som, take it to maskrom mode.
with tool androidtool 2.3
eraseflash
lowerformat
upgrade firmware.
it doesnt work still.
i guess i need fully erase nand partitions and make it as virgin . but how?
installed virtual machine and ubuntu to fix by rkflashkit but, it cant recognise usb
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com