My CUBE i9 (bought in March 2017) becam an issue after a few months.
After startup the screen remains black (no backlight, no picture), but Win10 started.
Only after switching ON/OFF about 20 times, the screen will once switch on and computer works normally after that. I kept it on for several weeks without any problem.
Unfortunately, after closing the lid and a restart, due to often ON/OFF switching Win10 "broke" and now only (when the screens turns on) a kind of DOS screen (called SHELL) appears.
I am quite desperate and have no idea how to get it repaired.
Writing Cube Service Center doesn't lead to any reply...
Do you have an idea where I can get it repaired (I live in Germany)?
Related
I had a weird instance happen on one of my pros a little bit ago. I hope I'll be able to explain this well enough for someone to recognize it (i'm pretty tired).
I was charging my pro... i disconnected it from the usb, then went to turn the display off via power button and my screen turned black. Not off, but black. Even in this black mode, you could see fuzzy lines so it was obviously acting strangely (picture an old tv on an input channel not being used. Youd be able to tell the tv was still on...). The phone still functioned, i just couldn't turn the display off at all no matter how many times i pressed power on/off (I'd only get the strange fuzzy black screen). A soft reset fixed this right away... I just think it's weird that it would still acknowledge my power button presses by turning to that black screen... why couldn't it just turn off if it was acknowledging what i wanted?
Has anybody ever had this happen on any of their phones, present or past? I'm thinking this is just an isolated incident, but i'd like to know how rare of an occurance it actually is...
i'd hate to think i'm the only one that this has happened to.
I've had this same problem -- and so is a coworker of mine who has the same phone... we're running Juggalo's 0.06B ROM.
Earlier today, my mogul was working fine. But then it started getting sluggish, so I decided to soft reset it. Then the freak out begins.
This is my process of turning on the phone.
- Press power button
- Get to green windows mobile screen and hangs for a 5-10 minutes. (If I don't have the charger in, the screen turns off and turns on later when the phone gets passed the green boot up screen.)
- I managed to disable all my today plugins but when I try to get to SK Tools to try to fix the phone, i can't even make it past the start menu. It freaks out and the delay time is looong.
- The phone then craps itself and turns off the screen, but not letting me turn it back on. Forcing me to soft reset or take out the battery.
I HATE MY MOGUL!!! It sucks!!!!!! What can I do?!?!??!
Software Problem
Hi
It sounds like a software problem. I think that a hard reset would probably fix it but obviously that's a last resort.
Cheers
andrew-in-woking
I got nexus s (i9020T) recently and found the touch screen unresponsive sometimes. I've already tried several launchers(adw, lancherpro, go launcher ex), and it seems not launcher's problem. I've also tried to flash different ROMs, including CM-7rc2 and stock 2.3.3, and the problem remains.
Later I tried to bind Multi-touch Visualizer 2 to long pressing home button, and found the when screen is unresponsive, it can still detect press near edges very well, but not the center. While I press at the edge and drap across the center, it keeps tracking my finger correctly. In addition, Locking and unlocking the screen can solve the problem temporally.
I'm confused by the strange behavior, anyone experienced similar issue?
more info from test,
I connect my phone with adb, and tried to "cat /dev/input/event0"
The behavior confirms what I see in Multitouch Visualizor 2: the when the center of screen is unresponsive, nothing can be read from the device node.
I read the mxt224 touch screen controller doc, and it seems the chip features self-calibration, and thus I believe the "lock & unlock" will trigger the chip to tune it self in some way. I don't know kernel very well, so I cannot find the source code Any help please?
FYI. we are not alone.
http://code.google.com/p/android/issues/detail?id=13853
I got this problem too whenever my phone is in my pocket facing inward.
I have tried to open the calculator to see which part of the screen having problem. Mine is usually the "8" and "5" location unresponsive if my phone stayed in my pocket facing inwards for a certain period of time.
The problem will goes off after couple of mins when i can feel that the phone is cooler than my body temp.
I knew this happens to the Dell Streak as well.
Hi!
A Friend of mine has a Nexus 5 and its giving me headaches.
These Errors are happening:
- Keyboard shows and hides without control
- Device runs very slow
- After restart, sometimes the whole screen is filled with colored pixels. If i force the device to turn off, and weit a few minutes, it starts normally.
- Even the bootloader freezes / crashes.
I tried a clean flash (with the the newest factory image from google) but after a few restarts the screen was filled again with pixels. And after i shut it down and startet it a few minutes later it startet and the bootanimation was showing, but then froze...
I think its a Hardware problem. Or am I wrong? Do any of you had this problems?
And where can i Repair the Phone (Me and my Friend are living in Germany, and the Device was bought in Jerusalem) I don't thing it has still warranty.
The first day allready 2 times black screen out of no where and afther that no reaction on any buttons.
The first time i waited 10 min or more then the S7 reacted normal again.
The second time i pushed the buttons....
The only reaction is when i press the same time: powerbutton, homebutton & volume button down.
Has anyone the same problem?
I had that issue once with the home button. I had to schedule a reboot through the craptastical built in scheduler that is says it is supposed to optimize the device. Search for restart in the settings.
I have the same sort of problems. All in all the s7e seems very buggy to me. Random crashes (especially in oculus app), sd card is sometimes not recognised and after most reboots I get two error messages (one about touchwiz and one about system proc). I'm not sure what is going on.
My wife's is a black too. I had a similar issues with my s6 last year it was the brightness had been swiped to low in my pocket, I was able to barely see the screen in a dark room and turn it up. No such luck with her s7. Hope someone can offer an idea, I'm headed to Verizon later if I can't fix it myself.
S7 black screen
Verizon did a reset for my wife's S7 to fix it hold down volume down, right side button, and the button on the face of the phone together for 15 seconds. The phone came right back on with all apps and stuff intact. Hope this helps, they said this wasn't the first S7 to come back like this they think it's a software glitch.
Im having the same problem....
any one having dead galaxy s7 edge not broken
ERYCKA said:
Im having the same problem....
Click to expand...
Click to collapse
Try turning off the App Power saving mode!! This fixed the black screen problem on my phone.
I've got the same issue (sometimes 4 times in an hour, sometimes it doesn't happen for 2 days..!!).
I've tried fixing by doing a factory reset and turning app power saving mode off.
Unfortunately this did not fix the problem. Yesterday I got an unresponsive blackscreen again :crying:
Any ideas how to fix this problem?
This happened two days ago with my wife's S7 Edge. She was using it to text me about dinner plans after work, her screen shut off, and it wouldn't work for several hours. The thing was getting very hot. When she was home and charging the phone the screen started working again for a little while, but with several green stripes down the right edge snd aa flashing horizontal band of grey near the top overlaying the screen image. Then when I tried plugging it into my computer to use Samsung's Smart Switch to roll back from the update she had accepted while at work the screen died again. It has not come on since, not even the stripes, and blue or red LED lights once in a wwhile at random. I managed to use Smart Switch to wipe the phone's memory. Then the program took several hours to download something very slowly and install that - a whole new OS update? That completed, and now the charging LED works correctly and the green stripes and grey band are back, flashing rapidly when powering on. Otherwise no screen function. She is shopping for a new non-Samsung phone now. Ridiculous.