I had a weird instance happen on one of my pros a little bit ago. I hope I'll be able to explain this well enough for someone to recognize it (i'm pretty tired).
I was charging my pro... i disconnected it from the usb, then went to turn the display off via power button and my screen turned black. Not off, but black. Even in this black mode, you could see fuzzy lines so it was obviously acting strangely (picture an old tv on an input channel not being used. Youd be able to tell the tv was still on...). The phone still functioned, i just couldn't turn the display off at all no matter how many times i pressed power on/off (I'd only get the strange fuzzy black screen). A soft reset fixed this right away... I just think it's weird that it would still acknowledge my power button presses by turning to that black screen... why couldn't it just turn off if it was acknowledging what i wanted?
Has anybody ever had this happen on any of their phones, present or past? I'm thinking this is just an isolated incident, but i'd like to know how rare of an occurance it actually is...
i'd hate to think i'm the only one that this has happened to.
I've had this same problem -- and so is a coworker of mine who has the same phone... we're running Juggalo's 0.06B ROM.
Hi guys,
When I get a message the phone vibrates 3 times, like normal. But sometimes randomly it vibrates 1 time and then unlimited vibration. Until I get it out of my pocket and press the powerbutton so the screen goes on again. When the screen is on again the phone resumes the 2 vibrates. Very strange. I had it on multiple roms with different radio's. I don't use TF3D but HTC Home Plugin VGA edition.
I've experienced the same issue you speak of with the stock ROM, and I haven't found a solution or cause yet either.
I think it was this what caused my phone to sometimes go out. Because the vibration consumed all the power.
Do you use Touch Flo?
_MsG_ said:
Hi guys,
When I get a message the phone vibrates 3 times, like normal. But sometimes randomly it vibrates 1 time and then unlimited vibration. Until I get it out of my pocket and press the powerbutton so the screen goes on again. When the screen is on again the phone resumes the 2 vibrates. Very strange. I had it on multiple roms with different radio's. I don't use TF3D but HTC Home Plugin VGA edition.
Click to expand...
Click to collapse
That would be the angry bee. It is something that just happens. I've had it so bad that I have had to soft reset the phone. It only happens to me every great once in a while. However, I haven't run the stock rom since about 2 hours after buying the phone.
has happened to me twice now.
ive had the phone about 2 months.
Dane Austin said:
That would be the angry bee. It is something that just happens. I've had it so bad that I have had to soft reset the phone. It only happens to me every great once in a while. However, I haven't run the stock rom since about 2 hours after buying the phone.
Click to expand...
Click to collapse
I've had it happen to me a few times and had to soft reset it to make it stop. It doesn't happen too often, so I haven't been too worried about it.
I've had it happen when I launch an application just as it is starting to vibrate to signal a notification.
Do you guys also always have it as the second vibration? When it hangs it always is the second vibration at me. And when I press the screen again he makes 2 after it again.
I had a similar issue with the initial stock rom - my wife messaged me in the middle of a meeting and my phone would not STOP VIBRATING. Since it was on the desk, it buzzbuzzbuzzed really loud.
Now I'm on the Energy 3.0 rom and have not had an issue. Even with the updated leaked stock rom I didn't have the issue.
I discover that it only vibrates wrongly when I have the screen off. Pretty annoying though.
Don't we use some kind of stuff in common?
I use:
HTC Home VGA Edition for front end instead of manilla
HomeScreen++ for the handy shortcuts
I checked some things again, I am not 100% sure but I think it was HomeScreen++ that caused the problems here. The exact settings: at the Tools tab "Lock if Display is Off and vice versa, which didn't work anyway at the touch pro (did work on htc's I had before though), but I checked it off and now it still rings 3 times and no less or more. Hope this was it.
I do not use HomeScreen++ and it happens to me at least once a day, sometimes twice. Mine always seems to happen on the third vibrate, it will do the first two and then the third one just stays on. I press the power button for the screen to come back on and it stops.
I have it too sometimes.
EnergyRom 3.0
And you guys have something that auto lock the screen when you press the power off button? Or do you lock the screen before pressing the power button? Because here it seems to have something to do with the locking in combination of the standby mode (screen off)
So i am at home playing with my Xoom fine before going to work. I place it in it's padded bag and get in my car to go to work. No bumps, no bangs, no drops. I get into work and pull it out to play with it some more and the screen is dead, or so it seems. Backlight not coming on. So i think it is dead and force a soft reboot, still can see nothing, i try a few more times, finally i notice if i hold it in just the right light i can see the screen fine, it was rebooting, but the backlight wasn't showing.
I let it finish booting and if i hold the screen in just he right light i can see the live wallpaper moving, so i know the screen is on and working, i can click icons and everything, but the backlight still won't light up. Had to stumble my way to brightness in settings, really hard to do when you can barely make out the screen. Set it to auto, nothing, set it to fully bright, stil nothing.
Is this a hardware issue? Or could i have some random software glitch? I rebooted three times now, hoping it would change. Nope. Stock software, no root, nothing. Had it for almost a month now. This sucks.
Hi guys
I have this strange behavior going on in my Sentation.
Out of nowhere my phone started to have strange screen behavior... Didn't light up after pressing the power button (had to phone my self in order to get screen on).
The next thing was that suddenly the screen goes to maximum brightness or goes to minimum without any explanation (tried both auto brightness or manual).
After that I noticed that the screen went off when I was using it but when I pressed the left side of it it lighted up and off again... making me think of some kind of bad contact underneath. As I already had changed a broken touch screen for t3 times, and let the phone fall for several times I thought it had to do with some plug out of line...
I disassembled the phone completely and mounted up back again. The thing is that the phone started to freeze every 5 minutes (screen on but completely freezed. I have to pul out battery). Sometimes it freezes even in the recovery menu. I've tried several rom's with full wipe and not installing anything and its all the same.
Some times I still not that the screen goes off during the freeze but when I touch the left side it goes on again, but that doesn't change the freezed state even that I let down the phone for several minutes.
I disassemble the phone again, tried different back cover and different battery (one stock and other extra strength) I tried also all the suggestion related to the small pin in the back not connecting well with the back cover (adding an aluminium foil, pulling the pin out, etc..)
Nothing seams to resolve anything so I have clearly an hardware problem... but I don't know what to replace or where to look the damage!!!
Can anybody help me please?!
Update
I have an update on my problem:
I noticed that when I leave the phone on top of some kind of metal part and don't touch it it works all day without any problem but, as soon as I start to touch the phone, it freezes within minutes!
Could it be some kind of static electrical problem? How to resolve it?
I would apreciate any help
Thanks
My z-flip3 5g has a strange problem. If i close it (by folding the screen closed), then after opening (unfolding) the screen and touching the right side button/fingerprint reader to unlock it, i hear the quiet "click" noise that indicates the phone is unlocked, but the screen stays black. i then have to repeatedly push the lock button on the right to lock the phone again and unlock it again. after several attempts the screen finally turns on. sometimes it will go black a few seconds later and the same issue continues. but other times the screen will stay on and work fine.
i have noticed that if i do not close the phone (folding the screen together) then i do NOT encounter this issue. the phone screen turns on when pushing the right side button (or touching the fingerprint sensor) and everything works fine.
this issue started yesterday, a system update installed yesterday as well, could it be related?
i already restarted many times, booted into recovery mode and wiped the cache. nothing has helped. the only way to avoid the problem is by not closing (folding the screen shut) the phone.
One UI v 5.1
Android 13
Security patch level Feb 1, 2023
fully stock/not rooted
I have same behavior. Did you solve this problem?
Unfortunately no. Did a factory reset, hoping that would help, but the issue persists
Mine has recently started doing the same. Last update was right before this started several weeks ago. I don't have mine set to require fingerprint, it should just turn on after opening. If I open it partway, it will turn on, then turn back off when fully opened.
hi,
i have same problem, it's software problem?
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Digital Dragon said:
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Click to expand...
Click to collapse
and donĀ“t take it to the beach either!
What is also strange is that when I close the phone and open it a few seconds later, there is no issues whatsoever. However, if I leave it closed a few minutes, then when opening it, the problems with the screen staying off happen.
Yes, definitely don't take it to the beach!
@netridah , mine is doing exactly that. Which makes me wonder is it a wake issue, or a mechanical/sensor issue with the hinge.
one more to the bill
I checked the flexes and I warmed up the logic nothing works
I have the same issue: Flip 3 - 5G with OneUI 5.1 - 1 April Patch level
When I open the phone I eventually see for less than one second the lock screen, the goes black and unresponsive.
Then I have to press the button to turn the screen off (even if it is already) and then re-press the button or use the fingerprint to turn it on and it will work (eventually, sometime I have to do it a couple of times).
I already googled it on many forums but no solutions, I've tried to:
Disable the always-on display - no result, at first looked like it did the trick but the day after was having the same issue.
Check all the updates of the system components like always on-on display (settings --> lock screen --> always on display --> info), no help everything is up to date.
Hi,
I have the exact same problem, only difference is that I'm on the z flip 4.
I get the black screen and sometimes when opening or closing the phone the screen can flash in a bright yellow or green color.
I got a motherboard but the problem continued
Next step changing screen is very expensive at the moment
This is driving me crazy - also started the day I updated to OneUI 5.1.
Hoping for a solution soon!
I am also encountering this problem, I went to samsung repair shop 1 month out of warranty, sales person said it is a screen issue and needs to be replaced for 430$. Mine was before the update, i took mine near the pool, got wet maybe, as the alarm for usb charging mentioned unplug it immediately, day after it began randomly dark when phone is openned fully. Zflip 3
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
piper_indebt said:
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
Click to expand...
Click to collapse
How to disable the clockface? what would that contact cleaner be?
thanks
firstchris said:
How to disable the clockface? what would that contact cleaner be?
thanks
Click to expand...
Click to collapse
Hi, few days now, I still have occasional blacking out, I've tried putting my phone on safe mode, and this seems to solve the problem. I suspect it may not be hardware fault, but 3rd party software, "good lock" or something else that conflicts wit one ui, that makes the flipping open lag waking up. Contact cleaner used for electrical stuff
Didnt use my z3 for about a week let the battery drain.. then charged it too 100% without turning on the phone.. my phone back to normal now.. hope it works for you guys
Hello,
I am using Z Flip 4 and last night I started having this problem as well. I can confirm 100% that my phone has no hardware nor a history of impact of any sort that's why it's really frustrating having this kind of problem.
Has anyone already found a resolution for this problem?
Z flip 4 here also. Had the same problem with the screen. Took the phone to Samsung and they changed the screen, frame and back panel's for free under warranty.
They said it's a hardware issue.
So better to take the phone to Samsung.