TouchPro screen wouldn't turnoff with powerbutton.. kept getting strange black screen - General Questions and Answers

I had a weird instance happen on one of my pros a little bit ago. I hope I'll be able to explain this well enough for someone to recognize it (i'm pretty tired).
I was charging my pro... i disconnected it from the usb, then went to turn the display off via power button and my screen turned black. Not off, but black. Even in this black mode, you could see fuzzy lines so it was obviously acting strangely (picture an old tv on an input channel not being used. Youd be able to tell the tv was still on...). The phone still functioned, i just couldn't turn the display off at all no matter how many times i pressed power on/off (I'd only get the strange fuzzy black screen). A soft reset fixed this right away... I just think it's weird that it would still acknowledge my power button presses by turning to that black screen... why couldn't it just turn off if it was acknowledging what i wanted?
Has anybody ever had this happen on any of their phones, present or past? I'm thinking this is just an isolated incident, but i'd like to know how rare of an occurance it actually is...
i'd hate to think i'm the only one that this has happened to.

I've had this same problem -- and so is a coworker of mine who has the same phone... we're running Juggalo's 0.06B ROM.

Related

Problem with my Display or the phone software?

Hello,
I have a very strange problem with my HTC Touch Pro phone.
I'll explain my problem:
When you turn on your phone and you are on the "Home page" (the page where the time is displayed) there is a bar at the bottom of the display.
This bar says Phone and Programs.
When i access my volume control by using the 2 buttons on the left side of the phone a black screen appears with some bars on it to indicate the volume. Note that the black bar with the Phone and Programs buttons is gone!
But the problem is that i can slightly see the Phone and Programs text trough the black screen of the volume control...
The first time i turned on my phone it was clearly visible, but after hard-resetting my phone 3 times it seems to be all gone now.
What could have caused this problem? Are these texts burned into my screen or is my screen sensetive to white letters?
I really dont know what to think about it because it seems very strange to me that it is now gone after 3 hard-resets...
Does anyone know what may have caused this problem?
edit
When i still had the problem i checked out if the text that was visible on the volume screen was the actual text that should stand in the black bar on the bottom, but when i accessed the volume control from the Programs tab (notice that the menu bar then displays "All programs" and "Remove"), but the volume controll still displayed Phone and Programs, so it isn't the actual text that is visible, so it cant be something like a shine-trough or something like that.
Really dont know what to think, at this time 3x hard-resetting the phone helped and the texts aren't visible anymore, but i'm still worried that my screen is over-sensitive or maybe broken or something =\
edit
The text is getting visible again after having my phone on "stand by" for 10 minutes.
Does anyone has a solution or does anyone knows what the problem can be? i would like a awnser today because i could go the the store tomorrow, i may be able to switch it for a new one if the screen is really broken.
Hope someone knows more!
edit
Maybe some of you dont see it on your one Touch pro, but you will if you REALLY look close at the bottom left and right corner in your volume control screen.
Could it have something to do with lazy pixels or something?
edit
It seems to get worse when i have the phone and programs texts on my screen for 10 minutes, and then switch to volume management. Are my pixels lazy or something?
The longer the screen stays on with the Phone and Programs texts on and the icons of the menu etc, the more you see when you turn on volume control.
it just looks like it burns into my screen.
Take care! Maybe it burned into your eyes!
No, serious it cannot burn into your screen.
Only CRT screens can burn it, not TFT.
Hmm ok thats true haha,
But what else can cause such a problem... it is only visible if the phone is off stand by for a few minutes.
I had my phone on stand by the rest of this evening and just turned it on and now it is all gone again. But if i put my phone on the home screen for a few minutes, so with the texts, then its visible again on the volume controll screen
Had the phone on standby the whole night and now the texts are gone again.
They seem to get "burned" in somehow if the phone is off standby for a few minutes, but then when its on standby for a while they are gone again.
Just wanna know if more people have the same problem, or else i could send back my phone to HTC for a repair
johanromijn said:
Take care! Maybe it burned into your eyes!
No, serious it cannot burn into your screen.
Only CRT screens can burn it, not TFT.
Click to expand...
Click to collapse
http://compreviews.about.com/od/monitors/a/LCDBurnIn.htm
Well that seems to be the problem over here...
But when i turned on the phone for the first time there was much more "image burning" on the screen, and at this moment it is all gone ...
Could it be that the screen had to "warm up" or something because the phone is just 2 days old. The longer i used the phone the less the image burning is now.
Do these screens have to warm up or something when you turn on the phone the first time?
They shouldn't... Especially if you bought it locally, I'd take the safe road and return it. I'm not sure if it's exactly what that source describes, but I don't like taking chances with phones as expensive as this.
Hmm ok, thats wierd because the more i used it the less burned in texts are visible.
at this point there is nothing visible on my screen anymore ..
isnt there ANYONE else here that has the same problem or that wants to try it out and leave the phone off standby for some time ?
Someone that has the same problem, or someone who wants to check their phone for the same problem?
I dont know if i should return my phone for a repair..
Problem is getting visibl again,
Have used my phone some time today, but i didnt have it off standby for longer than 1 minute, and still there is a white bar slightly visible on the volume controll screen.
This is definately a problem with the screen right? something like Lazy pixels or something..
Anyone that can help?
btw, its seems that only the white colors get burned in
edit
It only seems to get "Burned" in when i'm in a window with white bars or spaces, and it fades when i have the phone on a black screen for a while..
And it only happens with the HTC Volume app?
no, but its good visible on that screen, its also slightly visible on the home screen etc..
It doesn't only burn in when the phone is off standby, but it also seems to get worse when the phone is ON standby... what i mean is that it doesn't fade away right away when the phone is on standby...
Just went back to the store to get a new phone.
I checked right away if the new phone also has the same problem, and it does...
texts also seem to get burned in for a while on this new phone, but also dissapear when the phone is unused for a while...
Could you guys check your phone's if you have the same problem?
Just use it for a while and check the volume control window if there are images still slightly visible on the screen.
Hope someone can do that for me!
edit.
Could i be SO unlucky that i have had 2 phone's of 1 wrong production serie?
Can anyone please check out their phone for the same problem?
I would like to know if there are more people experiencing this problem so that i dont have to return my phone for the 4th time =)
also i have spotted this problem. but it happened just a few times when the phone was hot (using gps).
Mmm ok, and you had the problem the exact same as me ? visible on the volume control screen etc?
More people having this problem?
Would appriciate it if some more of you could check it out for me
It never happened on my Fuze, I think it might be a bad batch that your store got in. That could be why when you returned it you're seeing the same things, a lot of people with yellow spots in their screen returned theirs and got the same thing in the next one.

AT&T Fuze screen issue - bottom menu-area of screen is flickering almost constantly

AT&T Fuze screen issue - bottom menu-area of screen is flickering almost constantly
(Forgive me for the length of this post. I am just trying to provide as much information as possible! If anyone has encountered this same or similar issue, your help is greatly appreciated).
I need help! (professional and otherwise) ...with my AT&T Fuze (rebranded Touch Pro).
I am developing a game for Windows Mobile called Scrobble (http://forum.xda-developers.com/showthread.php?p=3206316&posted=1), and I left it running overnight.
My screen is set to turn off after 1 minute, and my device set to sleep after 5 minutes when plugged in to external power.
I had the Fuze plugged into wall outlet power to recharge. I left it lying, like I always do, face down on a black soft-leather CD case (so the glowing charging light doesn't bother me).
I left it alone for the 7.5 or so hours I was asleep. When I woke up in the morning and picked it up, the screen was on. It usually is not on, and I don't think I pressed the button to activate the screen.
When I looked at the screen, the Scrobble program was still running, and the bottom menu portion of the screen was flickering. Scrobble has two menu buttons at the bottom -- "Turn" and "Game" -- with a SIP keyboard icon in between them (same as nearly all WM apps).
In any other program, or the Today screen, the menu portion of the screen flickers (the brightness constantly and rapidly fluctuates consistently... like a fluorescent light that is on its last leg).
I did a full power off and power on, and during the "world phone" screen and the the AT&T 3G "power up" animation, the flicker was -not- there. But as soon the Windows Mobile loading/splash screen appeared, the flicker returned, in the exact same spot.
And I can see the ghost "Turn -- [SIP] -- Game" menu in the flicker. But I don't think it's burnt into the display, because it's not there during the first two loading/splash screens.
Currently I have the battery completely removed from the device and will leave it out for a while. If that doesn't work I will do a hard reset.
Any help would be greatly appreciated!! (This device is about 2 months old -- does HTC provide any support for it directly?).
Fixed
Phew! My screen flicker issue is no more.
I'm not sure if it's because I took the battery out and let it sit and think about what it had done for ~22 hours, or if it's because it just went away after a while (with the battery out for 22hrs). But either way, my Fuze is back to normal!
So if anyone leaves theirs on overnight and wakes up in the morning to a flickering ghost of a menu at the bottom, my suggestion is to fully reboot it, then take the battery out and leave it out overnight!
(It's kind of nice going a full day without any phone calls!!).
good for you.. you dont need a new phone giving you damage issues already... glad to hear that its gone
Thanks you for this post. I am going through the same thing with my ATT Fuze. This time it is Tomtom that I left running overnight with the screen turning on and off. I can add that the flicker and ghost is there the second the phone powers on. I have already hard reset and took the battery out for a few mins, but the flickering still there. Now I will take the battery out for several hours and hopefully it will be normal again.
I had a similar issue this week. I was using the phone all day, getting emails and phone calls, no problems. I get home and go to charge my phone and it doesn't appear to be charging. I flip on the screen and the whole screen is flickering on and off like it's not getting enough power. I charged the device over night, hard reset, pulled battery for 24 hours and still it won't go away. I just got the device thru amazon so I already reordered a replacement.
I've never left my screen on for hours at a time and I sometimes run into that same issue. The bottom of the screen flickers, and I can see a ghost image of my left and right soft keys when doing things that pull up a dark grey or black screen, like adjusting the volume. I usually try a few soft resets, and if that doesn't work I turn it off and take the battery out for a while. From what I am reading it seems to be correlated with extended periods of screen usage, but my screen has rarely been kept on for more than 30 minutes at a time.
Not to beat a dead horse or anything, but I was just having the same problem with my Fuze: the bottom quarter of the screen was flickering, but without the ghosting you spoke of. Out of curiosity, I went into my "Power Settings" menu, and for some reason the "auto adjust backlight" was unchecked, and the brightness settings were maxed out. I checked "auto adjust backlight" and the flickering stopped. Not sure why, but thought I'd add it to the thread.
kart_racer3 said:
Not to beat a dead horse or anything, but I was just having the same problem with my Fuze: the bottom quarter of the screen was flickering, but without the ghosting you spoke of. Out of curiosity, I went into my "Power Settings" menu, and for some reason the "auto adjust backlight" was unchecked, and the brightness settings were maxed out. I checked "auto adjust backlight" and the flickering stopped. Not sure why, but thought I'd add it to the thread.
Click to expand...
Click to collapse
Yeah I did notice that it's only really noticeable when the screen is set to max brightness. Setting it on auto adjust cleared it up for me also.
proj3ktpat said:
Yeah I did notice that it's only really noticeable when the screen is set to max brightness. Setting it on auto adjust cleared it up for me also.
Click to expand...
Click to collapse
thx guys...helped me out too...
Just sent my unit in for repair (under warrenty) due to the screen flicker issue, lets see what happens when it comes back.
I just started to experience the flicker today. Has be somewhat concerned. The device is only two weeks old.
However, it seems to have stopped by itself while I was searching the forums for an answer. If it returns, I'll try the 'remove battery' method and see if that helps.
Also, I love Scrobble! Shame it doesn't work on QVGA displays. Or, at least, didn't on my Wizard...
Related thread
Hey guys there's a thread with the same exact issue and a screenshot on the first post.
http://forum.xda-developers.com/showthread.php?t=535099
Seems to be something related to the Hardware 3D Acceleration driver for Windows Mobile, I get this problem only once 3d has been activated.
If Sense/TF3D is turned off, I never see this problem. It only comes up once a game or Sense has been launched.
I can also boot into Android without 3D activated and not have this problem, but if I run Sense then go into Android I get the flicker from a Windows Mobile screen while in Android.
protwitness: That doesn't seem to be the case (for me, at least.) I don't run TF3D and it still happens. I can't really discern what the trigger is, but I have a feeling it has something to do with the screen brightness auto adjustment. (Sometimes, I'll turn my phone on when it's dark and it jumps to full day-light brightness for some reason.)
I've adjusted to it and it doesn't really bother me any more.

Black screen of death

The other day, I hit the power button on my touch pro, and the screen didn't come on. I did a soft reset, and it started working again. Now today, the same thing is happening, but a soft reset isn't helping.
The screen's back light comes on, the LEDs on the buttons come on, and the phone seems to be working fine. I hear all the sounds, including the HTC sound while it is booting, and the new message sound, but the screen stays black. It still recognizes touches, it just doesn't show an image. I want to do a hard reset, and will if I can get it to come one one more time, but its been about a month since I backed up my contact list. Lesson learnt there. I'm afraid it might be a hardware problem since I don't see anything while its booting either.
Anyone know if this is a known hardware issue with the touch pro? The phone is less then 3 months old, and I've been real careful with it. I haven't dropped it from more then 2 feet, and even that was onto carpet. Its the Verizon version if that makes a difference, and I'm running one of the NFSFAN roms. Its not the newest one, but rather the one posted on October 19th. I doubt its the rom, though, as I've been using it for around 2 months with no issues.
EDIT: Ok, I went into the bootloader to see if it was hardware of software. I figured if it was hardware, the screen would be black, and if it was software, it would be the rainbow. Sure enough, the screen stayed black. Hit the reset button, and the screen actually came on! Go figure. Went to do a backup, and the screen literally crapped out on me while I was watching it. Definitely a hardware problem.
similar with Touch HD... kinda
I've been having a similar problem with my Touch HD. The problem is very intermittent though and is sometimes hard to reproduce. The screen and phone will be working fine then once in a while when I push the power button to lock the phone, I'll unlock it and the screen stays black. I know that the phone is still on and even unlocked because pushing the buttons at the bottom makes the phone vibrate. The only consistency in reproducing the problem happens after I do something major on the phone such as making a phone call, browsing the internet, sometimes charging the phone. Other than that, I can sit here and push the power button all day and it'll come on and off with no problems. When the screen does go black I've taken the battery out repeatedly as well as repeatedly rebooted the phone until it comes back on. I've tried doing hard and soft resets to no avail. I've tried deactivating "turn off backlight if device is not used for" and "turn off device if not used for" without any resolve. After this I've even left the screen on (disabled backlight off) to see if it flickers or shows any sign of being faulty and it seems to be fine. I'm currently on Dutty's HD WM 6.5 Leo R5 WWE rom, but this has happened with two other roms (NRG, LIA). Other info include:
OS: 5.2.23016
Manila: 2.519192828.0
Radio: 1.14.25.24
Protocol: 52.64.25.34H
I guess the only consistent software has been my radio. Please help! Any advice would be awesome. I've tried google search and xda search without much help. Thanks

Green Screen?

Hey,
I was replacing my screen, when I went to test it instead of the google logo I got a fully green screen, the phone booted, but continued to be green. The always on display looks exactly as it should. Once it was fully on, I managed to put my pin in blind and the phone all works fine (it seems), and some black gets through, I assume the screen turns off those pixels which is why maybe that shows up correctly(ish).
The interesting thing is, I did at one point have to working fully, full colour, this was between reconnecting the ribbon cable and restarting, but I pressed the power button to sleep it and then hit it again and if I remember correctly was green again. So that made me think "poor connection" of come kind. What's even more strange is that when it is green and I press the power button to sleep and wake, the screen appears at least to display the full colours at the end and begging of their animations respectively. Maybe its not full colour, but at least it's more visible.
The final thing is when I go into the bootloader, sometimes it's full colour, and others it's got the solid green effect where black isn't displayed. What's odd is, even when the bootloader is showing correctly as soon as start is click it goes to a full green screen again and we don't see the logo at all. Also I managed to get into safe mode and it made no difference. It's just odd that it seems to decide to green, rather than due to any cable tussle
Basically has to a cable issue, but I'm not sure how to troubleshoot it, and advice on how to proceed would be much appreciated. Like if the screen arrived faulty, if the connector is damaged in the phone so it can't be used, and the motherboard would need replacing.
Thanks,
Dillon
In recovery mode, there's full colour as well, I factory reset the phone, but it made no impact. However entering into recovery mode did flash the google logo and some of the screen whit, and the same thing happened on reboot from recovery mode.
It seems so odd to have these kind of consistent moments of colour and not colour if it's the ribbon
I should have also mentioned, that the clamp is broken, could that be the issue, does the connection need to be screwed in?
Also Here are some images of both the phones connection and the screens
I'd say jb weld your broken clamp before buying parts. Could be as simple as that it's not a tight enough connection

Backlight on, no image

Hi guys,
I am experiencing the wierdest thing on my brother's Xperia Z3.
2 days ago, the phone randomly stopped showing images on the screen, but the backlight would still switch on and off as normal when pressing the power button. If the phone is restarted in this state by using key combos, the Sony logo won't even show up. This problem started intermittently, but now it does this for a much longer period. The issue would usually occur after the phone being locked, or if it were being used, the screen would show horrible distortion on the bottom half and become non-responsive until the screen switched off and any attempt to switch it on would be make the phone behave as described earlier.
I used to be able to make the image work by plugging in the USB cable, but this method seems to have stopped working, or at the very least has a really low success rate. I have tried all the soft reset methods: Power+VolUp, yellow button in the sim tray, none of those work for me.
I have just stopped short of reflashing the phone with Flash Tools.
Has anyone had this problem before? It is really confusing me as to whether this is a software or hardware issue.
Any suggestions?
I reflashed the phone using Flash Tools and the phone is still behaving the same way; just the backlight is turning on. Besides that, the phone seems to be making the correct noises and responding to the USB cable. Anyone have any ideas? Could it be the screen itself? I'm worried that it may be the motherboard.
Ok, I found something that works. If I hit the device with my hand on the back or the screen a few times, it seems to bring the phone back. My suspicion is either a loose screen connector or something on the motherboard. I'm not really comfortable with opening the phone up, so this is going to be my go-to solution. Hope this is able to help someone.

Categories

Resources