Hi all,
I have noticed that my screen seems to get the burn effect at the bottom (where the menu is in TouchFLO) most the time its not really noticeable until you slide the keypad. It dissapears if the phones been off for a while but considering the phone goes into standby and the screen doesnt stay on dont really know why this is happening.
Would you consider RMA'ing? just cant really do without the phone
I think I have noticed the same thing... it's a bug, not a hardware issue... try to softreset the phone and then look closely to that area
Same here
indeed, soft reset works. There is also an uglier version of screen distortion - when I browse to internet page that contains many flash applets (displayed by Adobe Flash Lite plug) Then I have a full screen flooding/chaotic/psychedelic (maybe more adjectives ) effect similar to my pre-previous laptop with broken lcd cables. I can stop it by turning off screen/suspending by the top button and turning it on again. It might appear then again but usually doesn't. Weird, not a problem for me though.
I just started having this "bug" yesterday. Basically, what happens (randomly) is that when I press the power button, remove the stylus, or slide the phone open to wake it up I'll be met with a black/blank screen. The backlighting will be on, and the phone is responsive (can receive messages, make calls, sounds/notifications work), but I won't be able to use the screen. If I use the power button to turn the screen back off and wait a few seconds, the screen might start working again. This is completely random and I cannot duplicate it with any guaranteed process, but it seems to be when the phone is waking up from standby. After a soft reset, probably half of the time I'll be met with this same delima, which leads me to believe it's hardware and not completely software.
At the same time the phone is also struggling to re-paint the screen from the change of Landscape-to-Portrait and visa versa. Also opening and closing windows to get back to the today screen also cause a problem. I've disabled TF3D to see if that makes a difference, it doesn't. I have a blank today screen with no plugins to free up the system resources, and am still having this issue.
I'm using JD's Rom (probably around 1.3, it's been running fine with no issues up to this point).
I'm also using S2U2 1.35 (if that makes any difference, haven't had any problems until recently)
The phone has never been dropped, it's in InvisibleShield, and normally sits on my desk charging all day.
This started happening last night for no apparent reason and it's really starting to irratate me.
Any advice is appreciated. Thanks.
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
After more testing..
After some more fiddling around with the phone I'm about 90% certain it's a hardware issue. I noticed that when I slide the keyboard out if the slide portion is past the number line then the screen will stay on, but not update. I don't know how well I can explain it. If I'm typing and hold the screen to keep it from opening all the way then I can see the letters/words appear (in txt msg/email), but if I let the screen goes and it slides all the way open then the screen will stay on and only show what has already happened, any more typed characters will not appear, but if I move the screen back to the number row then the screen will re-draw and update what has happened.
Is this something that Sprint should fix no questions asked?
lulugirl896 said:
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
Click to expand...
Click to collapse
The last piece of software I installed was Gyrator 2 on Friday-ish. Thinking that it was the problem, I removed it using MemMaid. I'm going to give the phone a flash tonight and see if it is software related (hoping for the easy fix) but as the post above says, I'm almost certain it's a hardware issue. I just wish I knew how it happened. . . So much for that time putting those InvShld on.
Final Update (this can be closed)
I took it into a Sprint store and they replaced the "flip" on the top for free (I have insurance).
Point of the story/thread, this can be closed, it was a hardware issue, and now it's fixed.
I had a weird instance happen on one of my pros a little bit ago. I hope I'll be able to explain this well enough for someone to recognize it (i'm pretty tired).
I was charging my pro... i disconnected it from the usb, then went to turn the display off via power button and my screen turned black. Not off, but black. Even in this black mode, you could see fuzzy lines so it was obviously acting strangely (picture an old tv on an input channel not being used. Youd be able to tell the tv was still on...). The phone still functioned, i just couldn't turn the display off at all no matter how many times i pressed power on/off (I'd only get the strange fuzzy black screen). A soft reset fixed this right away... I just think it's weird that it would still acknowledge my power button presses by turning to that black screen... why couldn't it just turn off if it was acknowledging what i wanted?
Has anybody ever had this happen on any of their phones, present or past? I'm thinking this is just an isolated incident, but i'd like to know how rare of an occurance it actually is...
i'd hate to think i'm the only one that this has happened to.
I've had this same problem -- and so is a coworker of mine who has the same phone... we're running Juggalo's 0.06B ROM.
AT&T Fuze screen issue - bottom menu-area of screen is flickering almost constantly
(Forgive me for the length of this post. I am just trying to provide as much information as possible! If anyone has encountered this same or similar issue, your help is greatly appreciated).
I need help! (professional and otherwise) ...with my AT&T Fuze (rebranded Touch Pro).
I am developing a game for Windows Mobile called Scrobble (http://forum.xda-developers.com/showthread.php?p=3206316&posted=1), and I left it running overnight.
My screen is set to turn off after 1 minute, and my device set to sleep after 5 minutes when plugged in to external power.
I had the Fuze plugged into wall outlet power to recharge. I left it lying, like I always do, face down on a black soft-leather CD case (so the glowing charging light doesn't bother me).
I left it alone for the 7.5 or so hours I was asleep. When I woke up in the morning and picked it up, the screen was on. It usually is not on, and I don't think I pressed the button to activate the screen.
When I looked at the screen, the Scrobble program was still running, and the bottom menu portion of the screen was flickering. Scrobble has two menu buttons at the bottom -- "Turn" and "Game" -- with a SIP keyboard icon in between them (same as nearly all WM apps).
In any other program, or the Today screen, the menu portion of the screen flickers (the brightness constantly and rapidly fluctuates consistently... like a fluorescent light that is on its last leg).
I did a full power off and power on, and during the "world phone" screen and the the AT&T 3G "power up" animation, the flicker was -not- there. But as soon the Windows Mobile loading/splash screen appeared, the flicker returned, in the exact same spot.
And I can see the ghost "Turn -- [SIP] -- Game" menu in the flicker. But I don't think it's burnt into the display, because it's not there during the first two loading/splash screens.
Currently I have the battery completely removed from the device and will leave it out for a while. If that doesn't work I will do a hard reset.
Any help would be greatly appreciated!! (This device is about 2 months old -- does HTC provide any support for it directly?).
Fixed
Phew! My screen flicker issue is no more.
I'm not sure if it's because I took the battery out and let it sit and think about what it had done for ~22 hours, or if it's because it just went away after a while (with the battery out for 22hrs). But either way, my Fuze is back to normal!
So if anyone leaves theirs on overnight and wakes up in the morning to a flickering ghost of a menu at the bottom, my suggestion is to fully reboot it, then take the battery out and leave it out overnight!
(It's kind of nice going a full day without any phone calls!!).
good for you.. you dont need a new phone giving you damage issues already... glad to hear that its gone
Thanks you for this post. I am going through the same thing with my ATT Fuze. This time it is Tomtom that I left running overnight with the screen turning on and off. I can add that the flicker and ghost is there the second the phone powers on. I have already hard reset and took the battery out for a few mins, but the flickering still there. Now I will take the battery out for several hours and hopefully it will be normal again.
I had a similar issue this week. I was using the phone all day, getting emails and phone calls, no problems. I get home and go to charge my phone and it doesn't appear to be charging. I flip on the screen and the whole screen is flickering on and off like it's not getting enough power. I charged the device over night, hard reset, pulled battery for 24 hours and still it won't go away. I just got the device thru amazon so I already reordered a replacement.
I've never left my screen on for hours at a time and I sometimes run into that same issue. The bottom of the screen flickers, and I can see a ghost image of my left and right soft keys when doing things that pull up a dark grey or black screen, like adjusting the volume. I usually try a few soft resets, and if that doesn't work I turn it off and take the battery out for a while. From what I am reading it seems to be correlated with extended periods of screen usage, but my screen has rarely been kept on for more than 30 minutes at a time.
Not to beat a dead horse or anything, but I was just having the same problem with my Fuze: the bottom quarter of the screen was flickering, but without the ghosting you spoke of. Out of curiosity, I went into my "Power Settings" menu, and for some reason the "auto adjust backlight" was unchecked, and the brightness settings were maxed out. I checked "auto adjust backlight" and the flickering stopped. Not sure why, but thought I'd add it to the thread.
kart_racer3 said:
Not to beat a dead horse or anything, but I was just having the same problem with my Fuze: the bottom quarter of the screen was flickering, but without the ghosting you spoke of. Out of curiosity, I went into my "Power Settings" menu, and for some reason the "auto adjust backlight" was unchecked, and the brightness settings were maxed out. I checked "auto adjust backlight" and the flickering stopped. Not sure why, but thought I'd add it to the thread.
Click to expand...
Click to collapse
Yeah I did notice that it's only really noticeable when the screen is set to max brightness. Setting it on auto adjust cleared it up for me also.
proj3ktpat said:
Yeah I did notice that it's only really noticeable when the screen is set to max brightness. Setting it on auto adjust cleared it up for me also.
Click to expand...
Click to collapse
thx guys...helped me out too...
Just sent my unit in for repair (under warrenty) due to the screen flicker issue, lets see what happens when it comes back.
I just started to experience the flicker today. Has be somewhat concerned. The device is only two weeks old.
However, it seems to have stopped by itself while I was searching the forums for an answer. If it returns, I'll try the 'remove battery' method and see if that helps.
Also, I love Scrobble! Shame it doesn't work on QVGA displays. Or, at least, didn't on my Wizard...
Related thread
Hey guys there's a thread with the same exact issue and a screenshot on the first post.
http://forum.xda-developers.com/showthread.php?t=535099
Seems to be something related to the Hardware 3D Acceleration driver for Windows Mobile, I get this problem only once 3d has been activated.
If Sense/TF3D is turned off, I never see this problem. It only comes up once a game or Sense has been launched.
I can also boot into Android without 3D activated and not have this problem, but if I run Sense then go into Android I get the flicker from a Windows Mobile screen while in Android.
protwitness: That doesn't seem to be the case (for me, at least.) I don't run TF3D and it still happens. I can't really discern what the trigger is, but I have a feeling it has something to do with the screen brightness auto adjustment. (Sometimes, I'll turn my phone on when it's dark and it jumps to full day-light brightness for some reason.)
I've adjusted to it and it doesn't really bother me any more.
I've had an odd problem with my 820 almost since getting. I'm hoping one of you geniuses have some advice.
When I turn it on it works perfectly, sometimes for hours. Then the screen goes blank, and then random pixels begin to appear, starting at the top of the screen. Outdoors rather than random pixels the screen goes almost totally green. Strangely, if part of the screen is obscured the green only covers rhe exposed area.
Pressing the on button repeatedly usually brings back the lock screen and reset (on+down) fixes the problem for another few hours.
By the way, eventhough I can't see the screen the touch sensor works. For instance I can hold theon button and then swipe downwards to turn off the phone. I can also answer and hang up using earphones.
My daughter who purchased the phone said it worked fine until the amber update. I had hoped the black update would fix the problem but no change. I found some posts from people with the same problem who sent the phone in to be fixed and got it back in the same condition. I really don't want to go through the hassle unless I expect to get it back fixed. I'd rather try fixing it myself.
My question is whether this is a firmware problem an whether it is likely that re-installing the stock black rom would do any more than the ota install that occurred automatically did (or didn't do).
Any ideas?
Nobody?
By the way it seems to happen only, or mostly when in standby.
I installed an app that displays a clock and doesn't allow the phone to go into standby mode,
and the problem doesn't appear to occur (unless I forget to leave the app on top).
I would set the phone to standby = "never" but the option isn't available on my phone, though
I understand that there are those with the standby = "never" option.
Any idea if I can set standby = "never" with keyboard commands, perhaps?