Earlier today, my mogul was working fine. But then it started getting sluggish, so I decided to soft reset it. Then the freak out begins.
This is my process of turning on the phone.
- Press power button
- Get to green windows mobile screen and hangs for a 5-10 minutes. (If I don't have the charger in, the screen turns off and turns on later when the phone gets passed the green boot up screen.)
- I managed to disable all my today plugins but when I try to get to SK Tools to try to fix the phone, i can't even make it past the start menu. It freaks out and the delay time is looong.
- The phone then craps itself and turns off the screen, but not letting me turn it back on. Forcing me to soft reset or take out the battery.
I HATE MY MOGUL!!! It sucks!!!!!! What can I do?!?!??!
Software Problem
Hi
It sounds like a software problem. I think that a hard reset would probably fix it but obviously that's a last resort.
Cheers
andrew-in-woking
Related
I'm not sure how many people, if any, have experience with this phone, but I'm taking a shot in the dark because I am completely out of options here. The phone is similar to the Cect M88, and the other Cect iPhone-clones available, although I'm not sure how similar the button layout is.
I installed PCM Keyboard last night, and all was working fine until this afternoon, when all of a sudden, my phone wouldn't wake up. I ended up having to pull the battery in order to get it to restart, but then it wouldn't boot past the Windows Mobile screen (the first one - didn't even make it to the second screen).
After several attempts to hard reset (top volume button + camera button + power button), I was able to get it reset, but even though active sync was running, folders weren't showing up properly on the phone itself. I did a soft reset, and folders then showed up, but this time active sync wouldn't load on the phone. Several more soft resets did nothing, but I kept trying, and finally... the phone froze up again to the point where it hung on the Windows Mobile screen again. Now, despite all attempts, I can't even get it to hard reset. When I push all buttons from an off state, the screen will turn blue (which seems to indicate some kind of resetting is going on since it normally goes straight to the WM screen) and then a few seconds later, the Windows Mobile screen will come up and hang. I've tried every combination of buttons possible, and I've tried hard resetting probably a good 20-30 times since this happened. I've removed the SIM card, removed the SD card... I've basically tried hard resetting seemingly every way possible, and yet it still will not reset and load up WM 6.0 pro like it should.
Any ideas on how I can get this thing to at least move past the WM screen? If I'm totally unable to hard reset, what would be the next best course of action? Since this is an off-brand phone with no support or any kind of warranty, are there repair places out there that can restore the OS? Is that something I can do myself? (Phone didn't come with any software or anything.) I'm at a loss here... I really don't want to end up with a $200 blue flashlight/paperweight. I know I took my chances when I bought it, but well... this stinks.
worked
hey man i know its old and hopefully you still have your phone.. ok what you need to do is let the phone die completely so you may have to keep the blue screen on and keep turning it on till your phone does this like you i have hard reseted serveral time to no avail but when the phone died i took out the battery plugged it in to the wall charger placed the battery in the phone let the red led light by the camera light up then i turned it on and before the screen could show the splash i did the hard reset phone is aye ok !! hope this helps man.. your post helped me..
eric
Hello Guys,
I started to have problems with my wing and end up in three-color bootloader screen. I can tell you that I am not playing around with my phone. I do not even install any software not to risk its basic phone functionality since I am using this phone as a business phone. So, no crazy rom flash or etc has been done prior to this problem.
My phone started to have problems with answering calls last week. When it was ringing, it was keep ringing and I was not able to take the call even though I was pressing every possible buttons on the phone. It was locking.
I noticed that phone was locking the buttons too. So, I selected "do not lock buttons when the device is off". But, this does not have any effect. Phone was keep locking my buttons.
Last night, I noticed that my phone was unresponsive once again as usual, I soft reset the device, and it booted to the three color screen (I think you guys call this bootloader screen?) where it says "IPL 4.26.0002" and "SPL 4.26.0000". Tried to soft reset probably another 10 more times. same thing...
I took out the battery, went to sleep. Put back the battery in the morning, it booted to the OS and phone is running. But none of the hard buttons were working. It also hangs up the incoming call after first ring. I soft reset the device once again and it went back to the three-color screen.
I went to the Tmobile website, and found that there is an upgrade ROM. I downloaded and ran that program. It said that it installed it to the device successfully, and then the device rebooted itself. Guess what, back to the three-color screen.
I have been reading your forum since morning, and read a lot about brick phones etc. I tried couple of the techniques for recovering brick phones, but nothing helped. Hopefully, someone here can tell me what is going on, even though if the answer is to throw the device to the trash.
Additional Observations
It looks like nobody is interested
I have other observations.
- When "do not lock buttons" is checked, phone starts acting even more weirder. it generates keystrokes by itself. Camera starts taking photos.
- If the battery of the phone is out at least an hour (I don't know why), phones boots fine. If you soft reset at the moment, it will always goes back to the three color bootloader.
Can this be a virus?
I hope someone can help me, I have a Sprint Touch Pro2. Last night it randomly started rebooting itsself, i was not loading a new rom, i was not installed any software, i wasn't doing anything other that texting and IMing people. After i removed the SD Card, there were a few times i got it to load to the unlock screen, but once i got passed that it would say "starting device activation..." or something like that. Then i got it loaded but Touch Flo 3D would not automatically start. So i removed the battery and restarted it again and i went to bed and left it charging, and it kept restart itself again, when i woke up it the phone was dead, and will not turn on. The charging light is on but it will not turn on.
This happenned to me, i ended up having to exchange the phone.
have u tried a hard reset. U can do this by holding power button and call and end keys.
Phone must be off and it will completely erase your data
this sounds like what my phone is doing. is there a fix? i think im sol because i didnt buy it though sprint.
Not Hopeless
This happened to my Sprint TP2 I soft and hard-reset it but it still went back to the reboot loop.
I put it in the tri-boot screen and re-reflashed the stock ROM and all was well.
Same here
The same thing is happening for me right now. Soft-resets aren't helping. It's sporadic, however, sometimes saying it successfully activated and needs to reboot (then going into activation right away), sometimes saying it failed, and sometimes not coming up at all (but I'm pretty sure it's running in the background, even if I hit cancel, because the phone is very warm and the battery drains very quickly).
I took it to Sprint and they confirmed it was already activated. They tried manually activating it, succeeded, and it still kept doing it. However, both them and I were able to place a phone call, text, and visit a website... so basically it was working. But, like I said, this constant nagging of activation was running in the background sucking juice and killing performance. Their diagnosis was "it's acting weird". The main home screen clock has also been stuck at 0:00 ever since this started (though the lock screen clock and clocks in the World Clock screen are correct).
They said I could go to their service shop and do a diagnostic and backup/wipe/restore or they'd replace it under warranty if it still didn't work.
I figured I'd just try the hard reset myself tonight. Will post how that goes. I'm not sure what this "tri-boot" screen is, but I'll do some searching and check that out too.
My TD2 keeps wanting to turn off - the power off screen comes up (do you want to turn off your device?). If I select yes, it shuts down and immediately restarts. If I select no, it pops up again within a few minutes.
The device doesn't respond to the power button. I can't perform a hard reset, soft reset works OK, but problem continues. IF left sitting, the phone goes to sleep but wakes up soon after and the power dialog comes up again. If I remove and replace the battery, device starts OK but problem continues.
It may be coincidence, but this started hapenning the day after I (stupidly) opened a strange MMS and tried to play the attached "video" - which didn't play.
Haven't tried to reflash ROM - not sure what ROM I should be looking for. Current ROM version is 2.31.841.6 (64646) WWE. Should I just look for that? (This is a Telstra TD2 that I have had for bout a year - bought online)
Thanks.
OK - since the recent ota upgrade to ICS we've been having a few problems with the table touchscreen freezing - unfortunately now it seems to have got stuck almost all the time. Just at the moment, it is not responding at all to touch - just displays the lock screen when powered on, and then times out a little while later to black. I have to push power to get it back on - but the touch screen simply won't respond to unlock it. So far I have tried:
Holding down power until restarts - no effect - reboots still locked.
Using Vol-Down power on and doing factory reset - no effect - reboots into android setup screen touchscreen not working.
Draining power until it won't turn on. Then recharged. This worked! However...
After going through the setup process, resintalling apps etc., I hit the power button to go into standby. I then thought I'd go straight back in, but as soon as I hit the power button again, it wouldn't respond! Left it charging for a couple of hours, and turned on, this time got in - but same again - hitting the power button and coming straight back in, it's not responding again.
So I'm now back with a fully charged tablet that won't respond to touch at all. - perhaps if I leave it a few hours it might respond again - until it goes into standby!? The device is fully stock with WW_epad-9.2.1.11-20120221 (according to the screen at boot up when you hold down vol-d).
Is this likely to be software or hardware related? Do I need to send it for repair/replacement, or is there something else I can try first? Any help much appreciated. (Oh - I don't have external keyboard btw - so without screen it's pretty limited what i can do!)
Cheers,
Colin.
I have already encountered the same problem but with a cutom rom. to find my touch, I had to do a full wipe and new intallation.
I did full wipe using the Power/Vol-D but the touch screen didn't start working again until I let the battery completely drain.
Then I reinstalled everything (screen was working to begin with), however after I'd set everything up and reinstalled all my apps it stopped again.
Yesterday I managed to get an ota update to 9.2.1.17 (it started working for a short time). But then aftger rebooting again, it stopped again.
This morning it is working again, and I have uninstalled all my apps - just the core stuff on there now. For the moment it appears to be working (which is the longest for a while!) - going to see if it stops again while there aren't any extra apps installed...