Hello Guys,
I started to have problems with my wing and end up in three-color bootloader screen. I can tell you that I am not playing around with my phone. I do not even install any software not to risk its basic phone functionality since I am using this phone as a business phone. So, no crazy rom flash or etc has been done prior to this problem.
My phone started to have problems with answering calls last week. When it was ringing, it was keep ringing and I was not able to take the call even though I was pressing every possible buttons on the phone. It was locking.
I noticed that phone was locking the buttons too. So, I selected "do not lock buttons when the device is off". But, this does not have any effect. Phone was keep locking my buttons.
Last night, I noticed that my phone was unresponsive once again as usual, I soft reset the device, and it booted to the three color screen (I think you guys call this bootloader screen?) where it says "IPL 4.26.0002" and "SPL 4.26.0000". Tried to soft reset probably another 10 more times. same thing...
I took out the battery, went to sleep. Put back the battery in the morning, it booted to the OS and phone is running. But none of the hard buttons were working. It also hangs up the incoming call after first ring. I soft reset the device once again and it went back to the three-color screen.
I went to the Tmobile website, and found that there is an upgrade ROM. I downloaded and ran that program. It said that it installed it to the device successfully, and then the device rebooted itself. Guess what, back to the three-color screen.
I have been reading your forum since morning, and read a lot about brick phones etc. I tried couple of the techniques for recovering brick phones, but nothing helped. Hopefully, someone here can tell me what is going on, even though if the answer is to throw the device to the trash.
Additional Observations
It looks like nobody is interested
I have other observations.
- When "do not lock buttons" is checked, phone starts acting even more weirder. it generates keystrokes by itself. Camera starts taking photos.
- If the battery of the phone is out at least an hour (I don't know why), phones boots fine. If you soft reset at the moment, it will always goes back to the three color bootloader.
Can this be a virus?
Related
Ok, so far I've dumped the ROM and uploaded the kaiser-HardSPL and all was going lovely. However, after most of a day of pretty much inactivity I find the device suddenly goes very slowly. By which, I mean it can take several seconds to draw the screen.
Thinking this might be a rogue application using up all the processor cycles, I poked it up the bottom with the stick. (While doing this the first time, I held in power and camera just to see the boot loader text, but then I did it again with no buttons held.) It's a Vodafone device but it sat on the Vodafone splash screen for about 2-3 minutes then spent longer than that on the Windows Mobile screen before eventually dropping me into normality.
Except it's incredibly slow normality - I clicked on "start" and after a minute, it's not done anything yet.
Next step is a hard reset unless anyone has any better suggestion?
Help!
I assume you've pulled the battery?
Never assume anything... The full answer is, "No, but I have now"... I'm not sure that's going to do anything more than a soft (poke up the bottom) reset though. I'm now just waiting for the splash screen to subside while I'm typing this.
Having left it half an hour, while it went into standby and after noticing that the clock had stopped updating, I'm of the opinion that the already slow device has got slower...
Ok between 1 and 2 minutes to move from the splash screen to the "Windows Mobile" screen.
Now there's a turn up... After a further minute or so, I get a message, which has now cleared and gone back to the "Windows Mobile" screen before I had chance to copy it here. Basically it said that it had failed to boot either because I'd turned it off improperly or I'd installed something that it was opposed to. I should press send (I guess the green button) to reset to manufacturer's defaults.
Since that's my next stage anyway, I'll re-poke it with the pointy stick and press 'send' when it pops the message up. I'll put my trusty old Nokia N73 into flight mode and take a picture of the message so I can transcribe it here for everyone's amusement.
More news as it breaks.
I've now hit the 'send' button so it's doing a hard-reset. Meanwhile, here's the text it showed me:
Code:
The device is unable to boot be-
cause either you have turned off
the device incorrectly or tried to
install an application from untrusted
source. Press SEND to reset your
device or press any other button
to cancel. This operation will delete
all your personal data and restore
the device to its factory default
settings.
Nice. Ok, I'm at the 'tap the screen to set up your device' screen now.
Wonder what triggered all that nonsense then...
If you're like the rest of us and tooling around the all the fun programs in this forum, there's no telling.
I tell folks on computers, "Every piece of software you put on a machine is a liability to the operation of that machine." We can say that applies to this nifty little devices too.
I've had my phone experience the same symptoms you have posted here. Luckly for me a battery pull fixed mine. Sounds like the luck didn't spread much. Sorry.
Keep at it though. And don't fret the crashes. They do happen from time to time when you play hard.
So, a hard reset and a restore of a backup (Yes, I made a backup a few days ago even though I've been in the trade 20 years!) later, I'm back to normality. All I've done that's weird is install pof's loader and I can't see that's anything to do with it. What I was doing at the time of the slowdown was trying to connect to the wifi network at work. I thought the networking had just got itself tied in knots somehow but as the machine was even mega slow to boot, I can't really see that. At least I can still get back to square one at the moment.
I just need to create a .nbh out of the rom parts I dumped yesterday so that I can recover from anything more major...
Meanwhile, if you do a 'boot loader reset', would you expect it to say 'serial' if the USB isn't plugged in?
I'm starting to wonder if there is a major bug in the WiFi of the Tilt. There are some other threads on AT&T's site about this, and my work with WiFi on this unit has been dicey. Hmmmmm...
I'm not sure how many people, if any, have experience with this phone, but I'm taking a shot in the dark because I am completely out of options here. The phone is similar to the Cect M88, and the other Cect iPhone-clones available, although I'm not sure how similar the button layout is.
I installed PCM Keyboard last night, and all was working fine until this afternoon, when all of a sudden, my phone wouldn't wake up. I ended up having to pull the battery in order to get it to restart, but then it wouldn't boot past the Windows Mobile screen (the first one - didn't even make it to the second screen).
After several attempts to hard reset (top volume button + camera button + power button), I was able to get it reset, but even though active sync was running, folders weren't showing up properly on the phone itself. I did a soft reset, and folders then showed up, but this time active sync wouldn't load on the phone. Several more soft resets did nothing, but I kept trying, and finally... the phone froze up again to the point where it hung on the Windows Mobile screen again. Now, despite all attempts, I can't even get it to hard reset. When I push all buttons from an off state, the screen will turn blue (which seems to indicate some kind of resetting is going on since it normally goes straight to the WM screen) and then a few seconds later, the Windows Mobile screen will come up and hang. I've tried every combination of buttons possible, and I've tried hard resetting probably a good 20-30 times since this happened. I've removed the SIM card, removed the SD card... I've basically tried hard resetting seemingly every way possible, and yet it still will not reset and load up WM 6.0 pro like it should.
Any ideas on how I can get this thing to at least move past the WM screen? If I'm totally unable to hard reset, what would be the next best course of action? Since this is an off-brand phone with no support or any kind of warranty, are there repair places out there that can restore the OS? Is that something I can do myself? (Phone didn't come with any software or anything.) I'm at a loss here... I really don't want to end up with a $200 blue flashlight/paperweight. I know I took my chances when I bought it, but well... this stinks.
worked
hey man i know its old and hopefully you still have your phone.. ok what you need to do is let the phone die completely so you may have to keep the blue screen on and keep turning it on till your phone does this like you i have hard reseted serveral time to no avail but when the phone died i took out the battery plugged it in to the wall charger placed the battery in the phone let the red led light by the camera light up then i turned it on and before the screen could show the splash i did the hard reset phone is aye ok !! hope this helps man.. your post helped me..
eric
I hope someone can help me, I have a Sprint Touch Pro2. Last night it randomly started rebooting itsself, i was not loading a new rom, i was not installed any software, i wasn't doing anything other that texting and IMing people. After i removed the SD Card, there were a few times i got it to load to the unlock screen, but once i got passed that it would say "starting device activation..." or something like that. Then i got it loaded but Touch Flo 3D would not automatically start. So i removed the battery and restarted it again and i went to bed and left it charging, and it kept restart itself again, when i woke up it the phone was dead, and will not turn on. The charging light is on but it will not turn on.
This happenned to me, i ended up having to exchange the phone.
have u tried a hard reset. U can do this by holding power button and call and end keys.
Phone must be off and it will completely erase your data
this sounds like what my phone is doing. is there a fix? i think im sol because i didnt buy it though sprint.
Not Hopeless
This happened to my Sprint TP2 I soft and hard-reset it but it still went back to the reboot loop.
I put it in the tri-boot screen and re-reflashed the stock ROM and all was well.
Same here
The same thing is happening for me right now. Soft-resets aren't helping. It's sporadic, however, sometimes saying it successfully activated and needs to reboot (then going into activation right away), sometimes saying it failed, and sometimes not coming up at all (but I'm pretty sure it's running in the background, even if I hit cancel, because the phone is very warm and the battery drains very quickly).
I took it to Sprint and they confirmed it was already activated. They tried manually activating it, succeeded, and it still kept doing it. However, both them and I were able to place a phone call, text, and visit a website... so basically it was working. But, like I said, this constant nagging of activation was running in the background sucking juice and killing performance. Their diagnosis was "it's acting weird". The main home screen clock has also been stuck at 0:00 ever since this started (though the lock screen clock and clocks in the World Clock screen are correct).
They said I could go to their service shop and do a diagnostic and backup/wipe/restore or they'd replace it under warranty if it still didn't work.
I figured I'd just try the hard reset myself tonight. Will post how that goes. I'm not sure what this "tri-boot" screen is, but I'll do some searching and check that out too.
The other day, I hit the power button on my touch pro, and the screen didn't come on. I did a soft reset, and it started working again. Now today, the same thing is happening, but a soft reset isn't helping.
The screen's back light comes on, the LEDs on the buttons come on, and the phone seems to be working fine. I hear all the sounds, including the HTC sound while it is booting, and the new message sound, but the screen stays black. It still recognizes touches, it just doesn't show an image. I want to do a hard reset, and will if I can get it to come one one more time, but its been about a month since I backed up my contact list. Lesson learnt there. I'm afraid it might be a hardware problem since I don't see anything while its booting either.
Anyone know if this is a known hardware issue with the touch pro? The phone is less then 3 months old, and I've been real careful with it. I haven't dropped it from more then 2 feet, and even that was onto carpet. Its the Verizon version if that makes a difference, and I'm running one of the NFSFAN roms. Its not the newest one, but rather the one posted on October 19th. I doubt its the rom, though, as I've been using it for around 2 months with no issues.
EDIT: Ok, I went into the bootloader to see if it was hardware of software. I figured if it was hardware, the screen would be black, and if it was software, it would be the rainbow. Sure enough, the screen stayed black. Hit the reset button, and the screen actually came on! Go figure. Went to do a backup, and the screen literally crapped out on me while I was watching it. Definitely a hardware problem.
similar with Touch HD... kinda
I've been having a similar problem with my Touch HD. The problem is very intermittent though and is sometimes hard to reproduce. The screen and phone will be working fine then once in a while when I push the power button to lock the phone, I'll unlock it and the screen stays black. I know that the phone is still on and even unlocked because pushing the buttons at the bottom makes the phone vibrate. The only consistency in reproducing the problem happens after I do something major on the phone such as making a phone call, browsing the internet, sometimes charging the phone. Other than that, I can sit here and push the power button all day and it'll come on and off with no problems. When the screen does go black I've taken the battery out repeatedly as well as repeatedly rebooted the phone until it comes back on. I've tried doing hard and soft resets to no avail. I've tried deactivating "turn off backlight if device is not used for" and "turn off device if not used for" without any resolve. After this I've even left the screen on (disabled backlight off) to see if it flickers or shows any sign of being faulty and it seems to be fine. I'm currently on Dutty's HD WM 6.5 Leo R5 WWE rom, but this has happened with two other roms (NRG, LIA). Other info include:
OS: 5.2.23016
Manila: 2.519192828.0
Radio: 1.14.25.24
Protocol: 52.64.25.34H
I guess the only consistent software has been my radio. Please help! Any advice would be awesome. I've tried google search and xda search without much help. Thanks
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
rawon3 said:
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
Click to expand...
Click to collapse
You might be having hardware issues, such as a faulty power button. If you are the type of user that frequently presses the power button to lock/unlock the screen, this leads to excessive wear on the button components, this is why some users prefer to use the "tap to sleep" and "tap to wake" feature, to avoid wearing the power button out. On my LG, this feature is called "KnockOn", it's located in Accessibility settings.
Sent from my LGL84VL using Tapatalk