Hello guys i have Nokia 3 and i want to root it can i root it without any problems and after root can I recieve updates and am able to install it successfully?
I need help
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
xdrucsix said:
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
Click to expand...
Click to collapse
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
Oh, Ok I can see, I have to wait :/
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - "fastboot boot <recovery.img>"
the_laser said:
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - fastboot boot recovery <recovery.img>
Click to expand...
Click to collapse
i know that ta-1032 is for EU dual sim, ta-1028 is american single sim version but i think that there is no difference in hardware. he can try that command to see is that recovery works @xdrucsix
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
then you will see does it boot or not. twrp will disappear completely after you exit twrp.
I did every step that you say, nothing happened :/
something should definitely happen
at least show all fastboot.exe output during your tries
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
The twrp dint even work for 1032..
Mithra siva said:
The twrp dint even work for 1032..
Click to expand...
Click to collapse
it worked for me and others, which method you tried?
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only.. it was showing writing ..'recovery' failed..
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only..
It was showing ." Writing 'recovery'...failed (remote size too large)... Please help
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
Bro say something
Mithra siva said:
Bro say something
Click to expand...
Click to collapse
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Mithra siva said:
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
SkaboXD said:
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Click to expand...
Click to collapse
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Mithra siva said:
Thanks man it's done..
Click to expand...
Click to collapse
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Mithra siva said:
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Click to expand...
Click to collapse
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
SkaboXD said:
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
Click to expand...
Click to collapse
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Mithra siva said:
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Click to expand...
Click to collapse
did you rebooted after uninstalling system apps?
SkaboXD said:
did you rebooted after uninstalling system apps?
Click to expand...
Click to collapse
It was showing uninstalling failed
Related
Hi. Earlier I had lollipop version of android on my Honor 6 phone. A month back, I upgraded to Marshmallow version B831. Since then, I am not able to connect to mobile data. 2G/3G is not working on my phone. Please let me know what should I do.
Also if I navigate to About Phone ->>Status, I can see that Mobile data state is saying as Disconnected.
I think you should back up and do a phone reset
goldfinv said:
I think you should back up and do a phone reset
Click to expand...
Click to collapse
I did it yesterday. Is it possible to go back to Lollipop?
iamsonal said:
I did it yesterday. Is it possible to go back to Lollipop?
Click to expand...
Click to collapse
Yes. Download the full update package, then download HuaweiUpdateExtractor
Then. Download Multi tool
And run. Select U to Unbrick. Follow the on-screen instructions to extract the required files from the UPDATE package downloaded. Copy to the Unbrick folder and continue the process. Your phone should be on lollipop at the end.
goldfinv said:
Yes. Download the full update package, then download HuaweiUpdateExtractor
Then. Download Multi tool
And run. Select U to Unbrick. Follow the on-screen instructions to extract the required files from the UPDATE package downloaded. Copy to the Unbrick folder and continue the process. Your phone should be on lollipop at the end.
Click to expand...
Click to collapse
Is there any tutorial step by step to perform the downgrade process to Lollipop version?
Yes. There are a few in the forums
@iamsonal follow this if you don't want to use Multi Tool
Extract system.img, boot,img, cust.img, recovery.img from the UPDATE.APP using Huawei Update Extractor tool
Flash those files by first booting your device into fastboot mode, and then firing these commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
Remember that the command should be executed from the folder where these files are there.
After doing this do the three button update using that UPDATE.APP from which you extracted these files.
DigiGoon said:
@iamsonal follow this if you don't want to use Multi Tool
Extract system.img, boot,img, cust.img, recovery.img from the UPDATE.APP using Huawei Update Extractor tool
Flash those files by first booting your device into fastboot mode, and then firing these commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
Remember that the command should be executed from the folder where these files are there.
After doing this do the three button update using that UPDATE.APP from which you extracted these files.
Click to expand...
Click to collapse
When I fire this command
fastboot devices
It opens a screen with android logo, saying PHONE Locked. Will I be able to fire the fastboot commands?
iamsonal said:
When I fire this command
fastboot devices
It opens a screen with android logo, saying PHONE Locked. Will I be able to fire the fastboot commands?
Click to expand...
Click to collapse
Nope, you have to unlock your bootloader first.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Do you have the Unlock Code bro???
DigiGoon said:
Nope, you have to unlock your bootloader first.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Do you have the Unlock Code bro???
Click to expand...
Click to collapse
No. What should I do now?
iamsonal said:
No. What should I do now?
Click to expand...
Click to collapse
Don't worry follow this guide to unlock your bootloader first.
WARNING: UNLOCKING BOOTLOADER WILL WIPE YOUR DATA AND YOUR WARRANTY WILL GET VOID.
DigiGoon said:
Don't worry follow this guide to unlock your bootloader first.
WARNING: UNLOCKING BOOTLOADER WILL WIPE YOUR DATA AND YOUR WARRANTY WILL GET VOID.
Click to expand...
Click to collapse
Thanks. Let me check.
iamsonal said:
Thanks. Let me check.
Click to expand...
Click to collapse
Good luck.
Nothing
iamsonal said:
Nothing
Click to expand...
Click to collapse
What do you mean?
DigiGoon said:
What do you mean?
Click to expand...
Click to collapse
I mean when I am trying to press the 3 buttons simultaneously, it only displays the Honor booticon. It doesn't display any other screen.
iamsonal said:
I mean when I am trying to press the 3 buttons simultaneously, it only displays the Honor booticon. It doesn't display any other screen.
Click to expand...
Click to collapse
You put UPDATE.APP in dload folder of your External SDCARD no?
DigiGoon said:
You put UPDATE.APP in dload folder of your External SDCARD no?
Click to expand...
Click to collapse
I had. But I think it might have been deleted while unlocking bootloader. Is there any fastboot push command?
First read full steps iam not pro developer just share my experience(if step or missed just say)
Step 1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb install.zip and extract From above adb and Fastboot driver Installer
Step 3. Now Install adb and fastboot Driver on Your pc, path(C:\Program Files\Minimal ADB and Fastboot or C:\Program Files (x86)\Minimal ADB and Fastboot)
Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock
Step 5.Open the command on your PC. To open a command window in the current directory in Windows, press shift + Right Click anywhere on Windows explorer connect device into pc open CMD Here and type command :good:
Then follow Bellow Instructions be Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 6. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot oem unlock-go
or
fastboot flashing unlock
And one think unlock bootloader if loss data and stoarge:silly:
Step7. Rename twrp into recovery.img and put in adb Folder
Step8.(cmd) fastboot boot recovery recovery.img (dont flash just boot)
Step9. Recovery is Now boot and copy magisk on stoarge
Download Magisk latest yours choice(but i prefer magisk 15.1). copy to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF in case any porblem or bootloop
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot (if new member search how to recovery boot on android search youtube )
first boot may time pls just wait if sucess press thanks button
Error cannot load recovery.img
Plzzzz help
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Screen shot
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Unlock bootloder and say wat error
george.simbu said:
Unlock bootloder and say wat error
Click to expand...
Click to collapse
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
Usb debugging check and start
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
george.simbu said:
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
Click to expand...
Click to collapse
Bootloder issue
Yes i got it.....?
Factory data reset and then i do this tutorial....and i successfully flashed twrp
---------- Post added at 08:16 PM ---------- Previous post was at 08:11 PM ----------
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Make time buddy my previous mobile hs2 but iam use still now mi a1 lets wait
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Sudhangshu said:
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Click to expand...
Click to collapse
This right recovery and one member also sucess I am not fool mind you words
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
IAM just boot on recovery don't falshed
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Foxhoundalpha said:
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Click to expand...
Click to collapse
yes iam re edits step if worng say iam changed
Error this device Micromax hs2
Milkhu said:
Error this device Micromax hs2
Click to expand...
Click to collapse
Factory reset and try again must bootloader unlock
Okay, for all those who are getting errors whatsoever, here i would like to tell you that i followed these steps and flashed twrp and rooted my device with magisk.. as explained by author..
1) unlock bootloader ( make sure to enable developer options, check unlock oem option, check debug option, check unknown sources in security option)
Use "fastboot oem unlock-go" as it worked for me on my canvas infinity hs2.
2) now after your fone is resetted after unlocking, do the initial setup with setting up account etc and once you at home screen go to settings and once again enable developer options, check unlock oem option, check debug option, check unknown sources in security.
Then connect fone to pc, you'll get adb promt on fone screen, allow it and on pc cmd type "adb reboot bootloader"
Then volume up on fone.
And on pc cmd type
Fastboot flash recovery twrp.img
(Well the author told to use boot command instead of flash, but boot didn't work for me so i used fastboot flash recovery twrp.img
Once this is done type
Fastboot reboot
And as the fone is about to reboot, quickly press volume down for twrp to load. Then you can transfer magisk from pc while twrp is on screen. And install magisk provided in the link.
Reboot and you will see your fone rooted. Voila. Done.
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Foxhoundalpha said:
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Click to expand...
Click to collapse
No brother
Hi people,
Here can you you get the patched boot.img for 5.1.9 so that you can fastboot from the boot.img and then root your device in cmd.
Patched and normal boot.img can be downloaded from the attachments
After the update you need to boot your phone into bootloader then then type fastboot boot patched_boot.img and when it the phone boots then install magisk manager on the phone and then press install and then directly (recommend) option.
update download links: https://www74.zippyshare.com/v/dxGCgGju/file.html
https://wsi.li/1U5TP90Cyt26
Great , works perfectly. Thank you
thanks buddy really appreciate the effort just updated.
Gonna test the camera tomorrow when it's daylight haha
Just patched with your file, worked like a charm! Thanks a lot for the effort!!!
No problem people and all you have to do is use a bin extractor to get all the files from the update and then let magisk patch the boot.img so that you get a nice patched fastboot ?
McNizi said:
Great , works perfectly. Thank you
Click to expand...
Click to collapse
Sent from my Galaxy S8 using XDA Labs
how to install it guide please
---------- Post added at 04:00 AM ---------- Previous post was at 03:59 AM ----------
McNizi said:
Great , works perfectly. Thank you
Click to expand...
Click to collapse
how o you install it thanks
---------- Post added at 04:01 AM ---------- Previous post was at 04:00 AM ----------
Viking84 said:
Just patched with your file, worked like a charm! Thanks a lot for the effort!!!
Click to expand...
Click to collapse
guide to install it please help
sry but, what's the advantage?
need unlocked bootloader, yes?
Can you install this from twrp? Reason I ask is because I like to restore the stock boot image before installing a custom kernel, and this would save a step for me.
Thanks for posting this. This got me past accidentally flashing twrp directly to the boot partition after taking the latest OTA.
help
McNizi said:
Great , works perfectly. Thank you
Click to expand...
Click to collapse
installation guide please help
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
RiTCHiE007 said:
Hi people,
Here can you you get the patched boot.img for 5.1.9 so that you can fastboot from the boot.img and then root your device in cmd.
Patched and normal boot.img can be downloaded from the attachments
After the update you need to boot your phone into bootloader then then type fastboot boot patched_boot.img and when it the phone boots then install magisk manager on the phone and then press install and then directly (recommend) option.
files can be downloaded here https://wetransfer.com/downloads/5c80da83c5af3815fae1ee8ed785756220180717173519/0d0778
Click to expand...
Click to collapse
installation guide please help
izote61 said:
installation guide please help
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
installation guide please help
Click to expand...
Click to collapse
He just told you. Read the first post:
get the patched boot.img for 5.1.9 so that you can fastboot from the boot.img and then root your device in cmd.
Patched and normal boot.img can be downloaded from the attachments
After the update you need to boot your phone into bootloader then then type fastboot boot patched_boot.img and when it the phone boots then install magisk manager on the phone and then press install and then directly (recommend) option.
files can be downloaded here https://wetransfer.com/downloads/5c8...7173519/0d0778
help
REAL6 said:
He just told you. Read the first post:
get the patched boot.img for 5.1.9 so that you can fastboot from the boot.img and then root your device in cmd.
Patched and normal boot.img can be downloaded from the attachments
After the update you need to boot your phone into bootloader then then type fastboot boot patched_boot.img and when it the phone boots then install magisk manager on the phone and then press install and then directly (recommend) option.
files can be downloaded here https://wetransfer.com/downloads/5c8...7173519/0d0778
Click to expand...
Click to collapse
help how to do it fastboot from the boot.img
izote61 said:
help how to do it fastboot from the boot.img
Click to expand...
Click to collapse
Install ADB and the fastboot mode with the oneplus drivers.
Then type cmd in the windows search bar to open up command prompt
Will my data be deleted after this procedure?
Enviado desde mi ONEPLUS A6003 mediante Tapatalk
deleted
RiTCHiE007 said:
Install ADB and the fastboot mode with the oneplus drivers.
Then type cmd in the windows search bar to open up command prompt
Click to expand...
Click to collapse
Hi, I don't know what I'm doing wrong :
My OEM Bootloader is unlocked
I reboot on fastboot mode
I connect the phone to my PC
I launch the PowerShell window from the folder where I have downloaded the boot.img and patched_boot.img
I check if my phone is here : fastboot devices (OK)
I launch the first command : fastboot boot.img => then the phone reboot "normally"
I power off the phone
I boot on fastboot mode
I launch the second command : fastboot patched_boot_img => the the phone reboot "normally"
And no root at the end... What am I doing wrong ?
Tibawbaw said:
Hi, I don't know what I'm doing wrong :
My OEM Bootloader is unlocked
I reboot on fastboot mode
I connect the phone to my PC
I launch the PowerShell window from the folder where I have downloaded the boot.img and patched_boot.img
I check if my phone is here : fastboot devices (OK)
I launch the first command : fastboot boot.img => then the phone reboot "normally"
I power off the phone
I boot on fastboot mode
I launch the second command : fastboot patched_boot_img => the the phone reboot "normally"
And no root at the end... What am I doing wrong ?
Click to expand...
Click to collapse
Reboot to recovery and flash magisk
Geoz said:
Reboot to recovery and flash magisk
Click to expand...
Click to collapse
Sorry, I'm so close :
I reboot to recovery
I type my password
I select English
Then... "Wipe data and cache" or "Advanced"
No "flash". Do I have to wipe cache (or anything else) in order to flash magisk ?
Thanks for your help !!
Tibawbaw said:
Sorry, I'm so close :
I reboot to recovery
I type my password
I select English
Then... "Wipe data and cache" or "Advanced"
No "flash". Do I have to wipe cache (or anything else) in order to flash magisk ?
Thanks for your help !!
Click to expand...
Click to collapse
If updating from stock only cache
Hi, I think I flashed a wrong recovery on the phone and now it's in a loop and shows this message the restart again .
there is no recovery or system installed I tried a lot of methods (dload - Multi-Tool 8 - adb fastboot ....) to install a recovery and boot and nothing did work.
the phone boots only in fastboot mode when I press volume -
ERROR MODE
Attention!
please update system again
(picture of android robot thingy)
Error!
Func NO:11 (recovery image)
Error NO:2 (load failed!)
I don't understand because sometimes it shows in cmd that all was successfully installed but when I try to boot into the recovery nothing happens!
Any help or suggestions would be appreciated ,thanks.
PS: Latest version was installed: a custom ROM OREO 8.0
Nevermind, I've fixed it.
Thanks anyway.
Fed-uP said:
Nevermind, I've fixed it.
Thanks anyway.
Click to expand...
Click to collapse
How you fixed it plzz help me bro..I have tried everything not a single hope:crying:
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
I am able to boot into fastboot mode...plzz help me asap:crying:
mohsin.kadiwala said:
How you fixed it plzz help me bro..I have tried everything not a single hope:crying:
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
I am able to boot into fastboot mode...plzz help me asap:crying:
Click to expand...
Click to collapse
Hi bro, can you tell me please how did your phone get broken?
What was the last firmware installed on the phone before it broke?
And is your phone the same edition as the one described above?
Fed-uP said:
Hi bro, can you tell me please how did your phone get broken?
What was the last firmware installed on the phone before it broke?
And is your phone the same edition as the one described above?
Click to expand...
Click to collapse
I think my system partion is damage because of that phone broken it's BLN-L22C675 EMUI 8.0 PATCH 1
mohsin.kadiwala said:
I think my system partion is damage because of that phone broken it's BLN-L22C675 EMUI 8.0 PATCH 1
Click to expand...
Click to collapse
Ok so you have the Indian branding.
The point is to get a recovery on the phone and to do that after a phone break like that is to first flash a kernel. With Oreo you need to to use a bit different commands than other android versions however you need to have a kernel.img for your phone edition (you can find one in Internet or extract it from the oreo version of your phone edition and once you have it boot into fastboot and run adb fastboot on your pc as administrator then type the following commands :
1- fastboot flash kernel (here you put the directory location of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
2- fastboot flash ramdisk (here you put the directory location again of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
3- fastboot flash recovery_ramdisk (here you put the directory location of where you have the recovery_ramdisk.img file FOR EXAMPLE: "C:\downloads\recovery_ramdisk.img") to download the TWRP
Remember to have the right imgs of the kernel and the recovery for you phone and the android version which is oreo in your case.
You should get no errors in cmd during the the process and you should be able to boot into recovery after accomplishing all that steps successfully.
Try this and tell me how it worked out for you.
Fed-uP said:
Ok so you have the Indian branding.
The point is to get a recovery on the phone and to do that after a phone break like that is to first flash a kernel. With Oreo you need to to use a bit different commands than other android versions however you need to have a kernel.img for your phone edition (you can find one in Internet or extract it from the oreo version of your phone edition and once you have it boot into fastboot and run adb fastboot on your pc as administrator then type the following commands :
1- fastboot flash kernel (here you put the directory location of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
2- fastboot flash ramdisk (here you put the directory location again of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
3- fastboot flash recovery_ramdisk (here you put the directory location of where you have the recovery_ramdisk.img file FOR EXAMPLE: "C:\downloads\recovery_ramdisk.img") to download the TWRP
Remember to have the right imgs of the kernel and the recovery for you phone and the android version which is oreo in your case.
You should get no errors in cmd during the the process and you should be able to boot into recovery after accomplishing all that steps successfully.
Try this and tell me how it worked out for you.
Click to expand...
Click to collapse
Kk..Ty's buddy I will try let u know..:good:
Hey guys,
VIDEO TUTORIAL:
https://youtu.be/ylBSZk7EqcA o
Someone written a better tutorial or you can follow my video tutorial
https://docs.google.com/document/d/1fdeO9jmm8ewwRX_G0MaGHsVfIVtxgh0yRK0-Yypcl_E/edit?usp=drivesdk
Credits:
@loonycgb2 for the bootloader tutorial
@jsergan[/MENTION] for the root tutorial
@Zackptg5p and whoever helped him for this DM Verity and forceencrypt disabler
Where "21ULMD Kdz file"
I can't found it on web
Ahmed Ismael said:
Where "21ULMD Kdz file"
I can't found it on web
Click to expand...
Click to collapse
https://lg-firmwares.com/downloads-file/20303/G710ULM21d_00_NAO_US_OP_0711
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
Before I flash it I wanted to ask if you notice any performance difference between 11g (oreo) and 21d. Is it just as fast?
ninjamirage said:
https://lg-firmwares.com/downloads-file/20303/G710ULM21d_00_NAO_US_OP_0711
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
Before I flash it I wanted to ask if you notice any performance difference between 11g (oreo) and 21d. Is it just as fast?
Click to expand...
Click to collapse
I Cross-Flash G710ULM20 GFI
Performance increases
I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.
ninjamirage said:
I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.
Click to expand...
Click to collapse
Nah it works you can update it via twrp or direct install it.
Awesomeslayerg said:
Nah it works you can update it via twrp or direct install it.
Click to expand...
Click to collapse
Thanks. I don't think I need fastboot yet. I am not sure how to erase the LAF partition.
ninjamirage said:
I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.
Click to expand...
Click to collapse
ninjamirage said:
Thanks. I don't think I need fastboot yet. I am not sure how to erase the LAF partition.
Click to expand...
Click to collapse
To zero it out use adb shell or the termrnial app then su
The do:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/laf_a
To get into download mode:
Theres two ways#
1. Get into fastboot mode and set current slot to b
Code:
fastboot --set-active=b
then reboot and hold the up button while its connectrc to your pc and you should be able to get into download mode
2. Boot into twrp, then tap reboot in the menu and on the bottom it should say slot a or b and select b. Then reboot. Dont worry about not being able to mount.
Awesomeslayerg said:
To zero it out use adb shell or the termrnial app then su
The do:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/laf_a
To get into download mode:
Theres two ways#
1. Get into fastboot mode and set current slot to b
Code:
fastboot --set-active=b
then reboot and hold the up button while its connectrc to your pc and you should be able to get into download mode
2. Boot into twrp, then tap reboot in the menu and on the bottom it should say slot a or b and select b. Then reboot. Dont worry about not being able to mount.
Click to expand...
Click to collapse
Is that for installing a custom rom?
Then do you need to do this?
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta_a.img
ninjamirage said:
Is that for installing a custom rom?
Then do you need to do this?
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta_a.img
Click to expand...
Click to collapse
Yes
This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!
CyborgSG said:
This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!
Click to expand...
Click to collapse
One person got it to work. I
Can you show the full details of your method, as I'm tried patch both img and it's work, but when I boot to download mode and connect to PC and open LGUp, it's always show unknown model, try flash the img it in fastboot many time, it's always happen like that
CyborgSG said:
This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!
Click to expand...
Click to collapse
CyborgSG said:
Can you show the full details of your method, as I'm tried patch both img and it's work, but when I boot to download mode and connect to PC and open LGUp, it's always show unknown model
Click to expand...
Click to collapse
First don't call a tutorial trash cause you didn't do it properly and you didn't even detail the problem properly. . Second, make sure you're still on 11g firmware or go back to 11g firmware via download mode of you're not and then flash the abl partition from the unlocked bootloader tutorial if you havent used that abl. Then fastboot flash rooted 11g boot_a and boot_b file then reboot to firmware and make sure it boots all the way up and restart your PC then try going into download mode again if it works go into fastboot flash the 21ulmd booted rooted image both a and b then immediately restart to download mod
I'm on g710ulm11g and I'm rooted, updated the magisk to 20.1, now do I have to boot to fastboot and boot the twrp20ulmrooted img to boot_a and boot_b and then boot to download mode?
CyborgSG said:
I'm on g710ulm11g and I'm rooted, updated the magisk to 20.1, now do I have to boot to fastboot and boot the twrp20ulmrooted img to boot_a and boot_b and then boot to download mode?
Click to expand...
Click to collapse
Noo. Fastboot flash 21ulmrooted to both a and b then reboot to download mode.
question: I am rooted with magisk and on ULM21d. I have extracted the image file and renamed it "twrp21ulmdroot.img" and put this file on my internal storage /sdcard. When I run the command dd if=/sdcard/twrp21ulmdroot.img of=/dev/block/bootdevice/by-name/boot_a in adb shell (as root #) it keeps giving me a response of dd: /sdcard/twrp21ulmdroot.img: No such file or directory. The file is actually there. Any ideas?
way2aware said:
question: I am rooted with magisk and on ULM21d. I have extracted the image file and renamed it "twrp21ulmdroot.img" and put this file on my internal storage /sdcard. When I run the command dd if=/sdcard/twrp21ulmdroot.img of=/dev/block/bootdevice/by-name/boot_a in adb shell (as root #) it keeps giving me a response of dd: /sdcard/twrp21ulmdroot.img: No such file or directory. The file is actually there. Any ideas?
Click to expand...
Click to collapse
Are you sure you didn't name it twrp21ulmd.img.img? Or reboot the device.. Make sure it's where the Download, pictures etc.. folders are.
Awesomeslayerg said:
Noo. Fastboot flash 21ulmrooted to both a and b then reboot to download mode.
Click to expand...
Click to collapse
When I'm try to boot the twrp20ulmrooted to boot a and boot b, bcoz I want to root on g710ulm20e, then in command it's show up: cannot boot a boot.img *and* ramdisk, so what exactly command I have to use in adb and fastboot?
Awesomeslayerg said:
Are you sure you didn't name it twrp21ulmd.img.img? Or reboot the device.. Make sure it's where the Download, pictures etc.. folders are.
Click to expand...
Click to collapse
sir, your tutorial worked perfectly for me- I now for the first time since owning this phone have a custom recovery. Thank you for your help :good:
Edit: my problem earlier was that the image file was not installing to my internal storage in the right place for whatever reason... /sdcard was not available when searching my int storage. So I dropped the file into 'Download', then used Advanced tools pro file manager to grab it and paste it into the parent directory. At that point the shell commands worked