First read full steps iam not pro developer just share my experience(if step or missed just say)
Step 1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb install.zip and extract From above adb and Fastboot driver Installer
Step 3. Now Install adb and fastboot Driver on Your pc, path(C:\Program Files\Minimal ADB and Fastboot or C:\Program Files (x86)\Minimal ADB and Fastboot)
Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock
Step 5.Open the command on your PC. To open a command window in the current directory in Windows, press shift + Right Click anywhere on Windows explorer connect device into pc open CMD Here and type command :good:
Then follow Bellow Instructions be Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 6. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot oem unlock-go
or
fastboot flashing unlock
And one think unlock bootloader if loss data and stoarge:silly:
Step7. Rename twrp into recovery.img and put in adb Folder
Step8.(cmd) fastboot boot recovery recovery.img (dont flash just boot)
Step9. Recovery is Now boot and copy magisk on stoarge
Download Magisk latest yours choice(but i prefer magisk 15.1). copy to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF in case any porblem or bootloop
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot (if new member search how to recovery boot on android search youtube )
first boot may time pls just wait if sucess press thanks button
Error cannot load recovery.img
Plzzzz help
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Screen shot
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Unlock bootloder and say wat error
george.simbu said:
Unlock bootloder and say wat error
Click to expand...
Click to collapse
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
Usb debugging check and start
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
george.simbu said:
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
Click to expand...
Click to collapse
Bootloder issue
Yes i got it.....?
Factory data reset and then i do this tutorial....and i successfully flashed twrp
---------- Post added at 08:16 PM ---------- Previous post was at 08:11 PM ----------
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Make time buddy my previous mobile hs2 but iam use still now mi a1 lets wait
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Sudhangshu said:
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Click to expand...
Click to collapse
This right recovery and one member also sucess I am not fool mind you words
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
IAM just boot on recovery don't falshed
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Foxhoundalpha said:
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Click to expand...
Click to collapse
yes iam re edits step if worng say iam changed
Error this device Micromax hs2
Milkhu said:
Error this device Micromax hs2
Click to expand...
Click to collapse
Factory reset and try again must bootloader unlock
Okay, for all those who are getting errors whatsoever, here i would like to tell you that i followed these steps and flashed twrp and rooted my device with magisk.. as explained by author..
1) unlock bootloader ( make sure to enable developer options, check unlock oem option, check debug option, check unknown sources in security option)
Use "fastboot oem unlock-go" as it worked for me on my canvas infinity hs2.
2) now after your fone is resetted after unlocking, do the initial setup with setting up account etc and once you at home screen go to settings and once again enable developer options, check unlock oem option, check debug option, check unknown sources in security.
Then connect fone to pc, you'll get adb promt on fone screen, allow it and on pc cmd type "adb reboot bootloader"
Then volume up on fone.
And on pc cmd type
Fastboot flash recovery twrp.img
(Well the author told to use boot command instead of flash, but boot didn't work for me so i used fastboot flash recovery twrp.img
Once this is done type
Fastboot reboot
And as the fone is about to reboot, quickly press volume down for twrp to load. Then you can transfer magisk from pc while twrp is on screen. And install magisk provided in the link.
Reboot and you will see your fone rooted. Voila. Done.
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Foxhoundalpha said:
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Click to expand...
Click to collapse
No brother
Related
Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img', 'bootloader.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot flash bootloader bootloader.img
press enter.
viii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button.
Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*ﾟ▽ﾟ)ﾉ
sent from xda app in my s710 using tapatalk . (*ﾟ▽ﾟ)ﾉ
andywoody12 said:
Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*ﾟ▽ﾟ)ﾉ
sent from xda app in my s710 using tapatalk . (*ﾟ▽ﾟ)ﾉ
Click to expand...
Click to collapse
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.
androidoverdoze said:
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.
Click to expand...
Click to collapse
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...
Sent from my S710 using XDA Free mobile app
andywoody12 said:
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...
Sent from my S710 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately?
androidoverdoze said:
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately?
Click to expand...
Click to collapse
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?
Sent from my S710 using XDA Free mobile app
andywoody12 said:
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?
Sent from my S710 using XDA Free mobile app
Click to expand...
Click to collapse
So, its a tablet pc. Ok if you can get access to the bootloader menu then only my procedure is possible.Actually you do not need any CWM recovery for getting into the bootloader menu. It comes up when you switch on your device by pressing the volume up and the power button at the same time.
Thankyouu so much bro,my phone was not getting detected by sp flash tool and i wanted to downgrade to kitkat.
This really helped me!
nipun2309 said:
Thankyouu so much bro,my phone was not getting detected by sp flash tool and i wanted to downgrade to kitkat.
This really helped me!
Click to expand...
Click to collapse
I'm happy to hear it that, it helped. I'm glad to help you. If have any problem just let me know it. I will help you.
Help needed !!
androidoverdoze said:
I'm happy to hear it that, it helped. I'm glad to help you. If have any problem just let me know it. I will help you.
Click to expand...
Click to collapse
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]
AgentJT said:
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]
Click to expand...
Click to collapse
In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.
androidoverdoze said:
Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button.
Click to expand...
Click to collapse
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
androidoverdoze said:
In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.
Click to expand...
Click to collapse
where to use this zip file i hv dowloaded it plz help my phone is bricked
stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
I have released the Android one flash tool.
Visit this page http://forum.xda-developers.com/cro...lick-flash-t3339494/post65921661#post65921661
stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
I have released the Android one flash tool.
Visit this. http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
androidoverdoze said:
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
Click to expand...
Click to collapse
ihv downloaded your android one flash tool its very useful thanks
my phone is still not booting up
stan1996 said:
ihv downloaded your android one flash tool its very useful thanks
my phone is still not booting up
Click to expand...
Click to collapse
Did u download the rom? If not, then download the rom and extract it to the AOnePro installation folder. Then boot your phn to the bootloader and activate fastboot mode and one by one flash the files. Link for rom https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
androidoverdoze said:
Did u download the rom? If not, then download the rom and extract it to the AOnePro installation folder. Then boot your phn to the bootloader and activate fastboot mode and one by one flash the files. Link for rom https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Click to expand...
Click to collapse
where is the AOnePro installation folder??
stan1996 said:
where is the AOnePro installation folder??
Click to expand...
Click to collapse
It is the folder where the AOnePro gets installed. C: -> Program files (x86) -> ZedSofts -> AOnePro
Help Guys....
Yesterday, I was flashing twrp recovery from android one toolkit.
Before I was using Philz touch recovery.
after Installing twrp, whenever I tried to boot my device it directed to recovery mode and the image of twrp stucks.
even If I open reccovery mode from an alternative way...it stucks in the twrp screen "teamwin".
Help guys how to get my phone back.
will the given method will work for it?
I yes, can I use AndroidOne Toolkit for using installing recovery again?
---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------
Can I use this method on cm13 rom?
Guys im opening this thread on how to unlock Boot loader and flashing twrp in steps clearly...as there are no clear guide to do this in main threads and people can also share things here...Thanks for the devs who are working for us[emoji3]
Thanks and all credit goes to Dev (Uberlaggydarwin) for developing the magic tool (Magictricks.zip) for unlock and initiating development of this device and all I need from you is just clicking thanks button below that's all [emoji12] [emoji12] [emoji12]
Sent from my F1f using XDA-Developers mobile app
Steps: Making bootloader unlockable
Download Magictricks.zip by (uberlaggydarwin) - go to stock recovery- select install from storage- select the downloaded zip- flash or update it.
This will make the boot loader unlockable and brings fastboot to our device...see below how to unlock bootloader through fastboot completely.
Sent from my F1f using XDA-Developers mobile app
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command in adb shell properly to fastboot and to flash custom recovery...let's begin
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7- Disconnect your oppo f1 and put your phone in fastboot mode(press and hold vol+ and power button} u will see fastboot screen on phone then connect via usb then let the system install bootloader driver....proceed below
7-Then finally Command in fastboot for our device.
Put twrp recovery image(rename as twrp) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb in fastboot mode and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot) command will show 'ok finished' with some like 0.07secs
Type this "fastboot flash recovery twrp.img" then press enter. wait it will flash then command will show 'ok finished' then disconnect and boot in to new recovery.....enjoy
Note - once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...To boot in to twrp recovery command as "fastboot boot twrp.img" press enter
That's it you have unlocked your boot loader and installed twrp recovery successfully[emoji3] [emoji12] [emoji3] [emoji12]
Credits
Thanks to @uberlaggydarwin for developing magictricks to unlock
Download links:
Magictricks by uberlaggydarwin - https://strangebinaries.re/f1f/magictricks.zip
ADB driver installer(optional) - www14.zippyshare.com/v/ufYG71o0/file.html
ADB Folder files-https://drive.google.com/file/d/0B9SasC5iWK5kT1liMlpKRGY3LVU/view?usp=sharing
Twrp recovery for f1f - http://build.twrp.me/twrp/twrp-3.0.2-0-f1f.img
Rooting guide:
After installing TWRP recovery flash this Super Su Stable version and reboot then install super su from playstore if you dont see any icon
Flashable Su Binaries - http://forum.xda-developers.com/showthread.php?p=23427715
Sent from my F1f using XDA-Developers mobile app
reserve
Thankss a lot
drganbds said:
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command adb properly please share it somebody[emoji12] ill share once I know and master it
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7-THEN FINALY COMMAND some for our device.
Put twrp recovery image(rename as twrp.img) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot)
stucked at waiting for device ( then i press vol + plus power button) command shows Ok finished but nothing happened to device no changes nothing...help please
Click to expand...
Click to collapse
I think you have not installed your adb drivers properly...use pdanet pc version to install otherwise use adb installer which is available in dl.
Sent from my F1f using XDA-Developers mobile app
Guys if u stuck at "waiting for device"
solution - disconnect the device, put it in fastboot mode (press and hold vol+ and power you will see fastboot screen)and connect it again then it will install bootloader drivers and continue. It will show 'ok finished' then u can continue to flash recovery and other stuffs...enjoy[emoji3] [emoji12] [emoji3] [emoji12]
Sent from my F1f using XDA-Developers mobile app
@ teteakholhring. you have done it right go head flashing recovery step.....now u unlocked the bootloader then flash the recovery
Thread re edited please check if u have doubts.
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
^^ I've read from other thread that right after you flashed the TWRP recovery image, you must start-up the phone in TWRP recovery first before eventually booting to Android.
I haven't unlock my phone yet though but I will once I see some custom ROMs available.
Sent from my F1f using Tapatalk
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
All your steps are perfectly right but once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...
Do the recovery flash again and boot to twrp first...
It is not necessary that oem unlock will wipe your data so no worry.
Me too I'm waiting for available alternative roms to install twrp recovery ....I just flashed magictrick and it said that I have update the build.... Thanks sure it will be functional....
x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
teteakholhring said:
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
Click to expand...
Click to collapse
Ya right guys...Please check this thread's main page everything was written clearly for how to do it correctly...enjoy
Sent from my F1f using XDA-Developers mobile app
hoping someone will upload a video on how to properly root our device.
wakaranay said:
hoping someone will upload a video on how to properly root our device.
Click to expand...
Click to collapse
What doubt you have? I'm here to clear it all and every steps are clearly explained in the main page...
Sent from my F1f using XDA-Developers mobile app
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
x36023x36023 said:
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
Click to expand...
Click to collapse
Use root app delete from playstore or manually remove .apk file along with .odex file...
Sent from my F1f using XDA-Developers mobile app
Honor 4c chm u-01 b120
locked bootloader
rooted with king root.
Phone still booting but no notwork service. NO SERVICE
Local update file found but cant flash update.app phone only restart.
recovery not comes up.
IMEI null
sorry bad english.
BinMgen said:
Honor 4c chm u-01 b120
locked bootloader
rooted with king root.
Phone still booting but no notwork service.
Local update file found but cant flash update.app phone only reboot.
recovery not working.
IMEI null
sorry bad english.
Click to expand...
Click to collapse
Hi You have made a big mistake by using KingRoot to root your device.
now you have got some serious issues but they can be solved.
First You need to make full wipe of your device currently and need to flash stock firmware.
1.Back up all your important data.
2.wipe current os by formatting.
3.Install the stock ROM version which you got initially.
4.you will get your IMEI number back.
if you are not clear about above or if the above proceess doesnt help help I will suggest another method.
miststudent2011 said:
Hi You have made a big mistake by using KingRoot to root your device.
now you have got some serious issues but they can be solved.
First You need to make full wipe of your device currently and need to flash stock firmware.
1.Back up all your important data.
2.wipe current os by formatting.
3.Install the stock ROM version which you got initially.
4.you will get your IMEI number back.
if you are not clear about above or if the above proceess doesnt help help I will suggest another method.
Click to expand...
Click to collapse
Thanks for your reply!
1 phone cant wipe current os by formatting, be cause recovery menu not comes up.
2 installing stock rom via local update not working phone restating only.
BinMgen said:
Thanks for your reply!
1 phone cant wipe current os by formatting, be cause recovery menu not comes up.
2 installing stock rom via local update not working phone restating only.
Click to expand...
Click to collapse
okay
First go to this link (https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110) and install ADB / Fastboot and Necessary Drivers and unlock your bootloader(your warranty is void) and check whether your phones being detected by ADB Fastboot
After unlocking I will suggest you next step as per the result you get.
Hi bud .
I hope i can help u with this.kindly follow the instructions properly and u are good to go.
1) install proper usb drivers.
2) open command prompt
3)enable fastboot mode in ur device and connect it pc
4)type this command there.
If u are using mfastboot , then type
mfastboot.exe devices
If u are using fastboot
type
fastboot.devices
5) here ur device will be showed with some numbers. So now put twrp or any other recovery in fastboot folder or the location where u are accessing the fastboot from. Be sure u re named recovery to recovery.img
6)type these command after copying ur twrp to that folder
mfastboot.exe flash recovery recovery.img
mfastboot.exe boot recovery.img
7) Now ur phone will automatically boot to recovery , here u can wipe data.
The bootloop is just because the data partition is still unwiped and no rom will boot . Just format data after booting the recovery .
Thank me if i helped you
--regards--
miststudent2011 said:
okay
First go to this link (https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110) and install ADB / Fastboot and Necessary Drivers and unlock your bootloader(your warranty is void) and check whether your phones being detected by ADB Fastboot
After unlocking I will suggest you next step as per the result you get.
Click to expand...
Click to collapse
I have try many times but still i get this msg "Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID."is this site working ?.
gopinaidu77 said:
Hi bud .
I hope i can help u with this.kindly follow the instructions properly and u are good to go.
1) install proper usb drivers.
2) open command prompt
3)enable fastboot mode in ur device and connect it pc
4)type this command there.
If u are using mfastboot , then type
mfastboot.exe devices
If u are using fastboot
type
fastboot.devices
5) here ur device will be showed with some numbers. So now put twrp or any other recovery in fastboot folder or the location where u are accessing the fastboot from. Be sure u re named recovery to recovery.img
6)type these command after copying ur twrp to that folder
mfastboot.exe flash recovery recovery.img
mfastboot.exe boot recovery.img
7) Now ur phone will automatically boot to recovery , here u can wipe data.
The bootloop is just because the data partition is still unwiped and no rom will boot . Just format data after booting the recovery .
Thank me if i helped you
--regards--
Click to expand...
Click to collapse
Hi! im working with you but i think something wrong with me, when i put this command "fastboot.devices" the answer is fastboot.devices is not recognized as an internal or external command,operable program or batch file
plz hep where is my problem?
BinMgen said:
Hi! im working with you but i think something wrong with me, when i put this command "fastboot.devices" the answer is fastboot.devices is not recognized as an internal or external command,operable program or batch file
plz hep where is my problem?
Click to expand...
Click to collapse
Hi the command is "adb devices" not "fastboot.devices"
If you are fine with above author help you can proceed if not here is the detailed guide.
Firstly go to this link and download the stock ROM for your device.(the version previous than your current rom)
http://www.carbontesla.com/firmware...-ota-collection/huawei-honor-4c-firmware-ota/
Extract the zip and later extract update.app by using this tool
https://forum.xda-developers.com/showthread.php?t=2433454
Now copy all the files namely recover.img,boot.img,system.img,cust.img into adb folder.
Now go to this link and unlock your bootloader
https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110
After unlocking now do the following procedure.
1.Enable developer's options in your device.
2.move to adb folder and right click and click on open command prompt here.
3.Now type this command "adb devices" -Displays some id of your device which makes sure your device is connected.(accept prompt on device)
4.type this command " ADB reboot bootloader " or manually boot into fastboot by shutting down your phone and restart by pressing Power+ vol+ buttons.
5.Now you are in fastboot menu.If not try again.
6.now type the following commands
7. "adb devices" -Displays some id of your device which makes sure your device is connected.
8. "fastboot flash recovery recovery.img" - Flashes stock recovery
9. "fastboot flash system system.img" - Replaces your custom rom with stock rom
10. "fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
11. "fastboot flash cust cust.img"
Now wait for some time and your device will boot into system and your IMEI number is back.
Note:If in steps 8-11 if you can't get success use mfastboot instead of fastboot.
miststudent2011 said:
Hi the command is "adb devices" not "fastboot.devices"
Click to expand...
Click to collapse
faatboot devices is a command too. But he typed it as fastboot.devices
gopinaidu77 said:
Hi bud .
I hope i can help u with this.kindly follow the instructions properly and u are good to go.
1) install proper usb drivers.
2) open command prompt
3)enable fastboot mode in ur device and connect it pc
4)type this command there.
If u are using mfastboot , then type
mfastboot.exe devices
If u are using fastboot
type
fastboot.devices
5) here ur device will be showed with some numbers. So now put twrp or any other recovery in fastboot folder or the location where u are accessing the fastboot from. Be sure u re named recovery to recovery.img
6)type these command after copying ur twrp to that folder
mfastboot.exe flash recovery recovery.img
mfastboot.exe boot recovery.img
7) Now ur phone will automatically boot to recovery , here u can wipe data.
The bootloop is just because the data partition is still unwiped and no rom will boot . Just format data after booting the recovery .
Thank me if i helped you
--regards--
Click to expand...
Click to collapse
Update!
- Now when i put this comand "mfastboot.exe devices" device shown with some numbers.
- When itype "mfastboot.exe flash recovery recovery.img" the answer Failed partition no support flash
plz help!
BinMgen said:
Update!
- Now when i put this comand "mfastboot.exe devices" device shown with some numbers.
- When itype "mfastboot.exe flash recovery recovery.img" the answer Failed partition no support flash
plz help!
Click to expand...
Click to collapse
try my method above
miststudent2011 said:
try my method above
Click to expand...
Click to collapse
The problem of your method unlocking bootloader, i got this msg Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID. when i submit my detail every time i do know what error
BinMgen said:
The problem of your method unlocking bootloader, i got this msg Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID. when i submit my detail every time i do know what error
Click to expand...
Click to collapse
For once in a while KingRoot helped you go to this page
http://huaweip8lite.blogspot.com/2016/03/bootloader-huawei-p8-lite-14-huawei.html?m=1
and follow the guide from step 2
you will get the boot loader unlock code.
or else PM me your details of your device
BinMgen said:
Update!
- Now when i put this comand "mfastboot.exe devices" device shown with some numbers.
- When itype "mfastboot.exe flash recovery recovery.img" the answer Failed partition no support flash
plz help!
Click to expand...
Click to collapse
Ur bootloader is still locked
gopinaidu77 said:
Ur bootloader is still locked
Click to expand...
Click to collapse
Yes!
BinMgen said:
Yes!
Click to expand...
Click to collapse
U need to unlock bootloader inorder to run above command
gopinaidu77 said:
U need to unlock bootloader inorder to run above command
Click to expand...
Click to collapse
I have try many times to submit my detail but every time i got this msg Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID. i don know the error
BinMgen said:
I have try many times to submit my detail but every time i got this msg Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID. i don know the error
Click to expand...
Click to collapse
If u specify a wrong device model ,it will show that error
gopinaidu77 said:
If u specify a wrong device model ,it will show that error
Click to expand...
Click to collapse
It seems Huawei has messed up with their website even though we enter correct details it is showing error.
They really need to solve the problem or else many would be lost.
miststudent2011 said:
It seems Huawei has messed up with their website even though we enter correct details it is showing error.
They really need to solve the problem or else many would be lost.
Click to expand...
Click to collapse
Have u contacted their support?
Hello guys i have Nokia 3 and i want to root it can i root it without any problems and after root can I recieve updates and am able to install it successfully?
I need help
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
xdrucsix said:
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
Click to expand...
Click to collapse
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
Oh, Ok I can see, I have to wait :/
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - "fastboot boot <recovery.img>"
the_laser said:
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - fastboot boot recovery <recovery.img>
Click to expand...
Click to collapse
i know that ta-1032 is for EU dual sim, ta-1028 is american single sim version but i think that there is no difference in hardware. he can try that command to see is that recovery works @xdrucsix
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
then you will see does it boot or not. twrp will disappear completely after you exit twrp.
I did every step that you say, nothing happened :/
something should definitely happen
at least show all fastboot.exe output during your tries
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
The twrp dint even work for 1032..
Mithra siva said:
The twrp dint even work for 1032..
Click to expand...
Click to collapse
it worked for me and others, which method you tried?
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only.. it was showing writing ..'recovery' failed..
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only..
It was showing ." Writing 'recovery'...failed (remote size too large)... Please help
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
Bro say something
Mithra siva said:
Bro say something
Click to expand...
Click to collapse
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Mithra siva said:
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
SkaboXD said:
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Click to expand...
Click to collapse
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Mithra siva said:
Thanks man it's done..
Click to expand...
Click to collapse
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Mithra siva said:
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Click to expand...
Click to collapse
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
SkaboXD said:
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
Click to expand...
Click to collapse
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Mithra siva said:
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Click to expand...
Click to collapse
did you rebooted after uninstalling system apps?
SkaboXD said:
did you rebooted after uninstalling system apps?
Click to expand...
Click to collapse
It was showing uninstalling failed
Root for MetroPCS/T-Mobile LG Stylo 2 Plus Android 7.0 Nougat ( LGMS550 & LGK550 )
Everything you need to root your LG Stylo 2 Plus running on Android 7.0 is packed into Stylo2.zip for convenience
If the link ever goes down send me a private message, I'll have a few backups of this laying around.
This method works on MetroPCS (LGMS550) and T-Mobile (LGK550) phone models.
Stylo2.zip(35.6mb)
VirusTotal Scan
Click to read the guide
Before doing anything, on your computer you need to extract Stylo2.zip to your Desktop, and install:
minimal_adb_fastboot_v1.4.1_setup.exe (Install this into the Stylo2 folder)
PhoneDrivers.exe
1. Enable Developer Options on your phone, and navigate to the Developer Options page.
Enable OEM unlock
Enable USB debugging
Enable File Transfer
Place no-verify-opt-encrypt-5.1.zip and SuperSU.zip onto your external sd card.
2. After placing the two zip files into the root of your sd card
Enable Charging mode
Authorize your computer for USB debugging
3. Launch MAF32.exe from the Stylo2 folder
(This is Minimal ADB and Fastboot)
4. In the window that pops up type:
adb devices
It should look like this:
PS C:\Users\Hyperion\Desktop\Stylo2> adb devices
List of devices attached
LGMS55010ca1cf1 device
PS C:\Users\Hyperion\Desktop\Stylo2>
5.Boot into the bootloader by typing
adb reboot bootloader
PS C:\Users\Hyperion\Desktop\Stylo2> adb devices
List of devices attached
LGMS55010ca1cf1 device
PS C:\Users\Hyperion\Desktop\Stylo2> adb reboot bootloader
PS C:\Users\Hyperion\Desktop\Stylo2>
6. Next you will be unlocking the bootloader
(This will erase everything on the Internal Storage)
In the PowerShell window you will need to type:
fastboot oem unlock
PS C:\Users\Hyperion\Desktop\Stylo2\Stylo2> fastboot oem unlock
...
(bootloader) Erasing userdata and cache
OKAY [ 12.386s]
finished. total time: 12.389s
PS C:\Users\Hyperion\Desktop\Stylo2\Stylo2>
Your data should now begin to wipe.
7. Once finished with the data wipe, you will need to flash the recovery.img to your device.
In the PowerShell window you will need to type:
fastboot flash recovery recovery.img
It should look like this:
PS C:\Users\Hyperion\Desktop\Stylo2> fastboot flash recovery recovery.img
target reported max download size of 262144000 bytes
sending 'recovery' (15588 KB)...
OKAY [ 0.508s]
writing 'recovery'...
OKAY [ 0.406s]
finished. total time: 0.918s
PS C:\Users\Hyperion\Desktop\Stylo2>
This is where it can get tricky.
8. Turn your phone off.
Unplug your USB cable
Take out your battery
Put your battery back in
Read next step before turning your phone back on
9. You will now need to boot into TWRP, which isn't the most fun thing to do.
(This process begins after the screen prompt that says your phone can't be authorized has already came up.[if it pops up at all])
Get comfortable with this process before attempting it.
Hold Vol Down + Power (Don't let go)
Once you see the LG Logo let go of the power button briefly
Press the power button while still holding Vol Down
Don't let go until a white Factory Reset screen comes up.
Select Yes, then on the next screen select Yes again
(This should boot you into the flashed TWRP Recovery Image)
If you do not boot into TWRP, repeat Process 1-8 until success
(excluding unlocking your bootloader, once unlocked it does not need to be unlocked again.)
10. Assuming you are in the TWRP menu, you will need to wipe the device again.
Navigate to WIPE in the top right
Follow on screen instructions to wipe the device
Click Reboot, and choose Recovery
It wouldn't be a bad idea to make a Backup at this point
11. Once back at the TWRP menu again, you will need to start flashing .zip files.
Click Install
Click Select Storage in the bottom left
Select no-very-opt-encrypt-5.2.zip
Swype to confirm Flash
Press back until at the TWRP main menu again
Click Install
Select SuperSu.zip
Swype to confirm Flash
Some people have had better luck flashing no-very-opt-encrypt after flashing supersu. (I can not confirm this)
12. Reboot to system, let the thing boot loop a couple times at the MetroPCS screen
Cross your fingers until your phone boots up
Download a Root Checker
Check your root access.
If all went well your MS550/K550 running Android 7.0 Nougat should be rooted
I hope it went well xD
-Mike
Thanks to:
Danielhammons1/Reemitch (For notifying me about a missing step between steps 4 and 5)
I tried this, but when I typed " fastboot oem unlock", all I got was (waiting for device).
i am stuck at fastboot oem unlock it doesnt do anything will you please contact me at [email protected]
wellsweb said:
I tried this, but when I typed " fastboot oem unlock", all I got was (waiting for device).
Click to expand...
Click to collapse
I believe between number 4 and 5, so at 4.5 you must enter the command "adb reboot bootloader" in order to enter fastboot mode.
some help please, stuck on step 4
I have done everything exactly as described in the instructions, when i type abd devices in the cmd prompt i get the following message:
PS C:\Users\gunda\Desktop\Stylo2> adb devices
adb : The term 'adb' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\gunda\Desktop\Stylo2>
any suggestions or idea as to what is the problem?
thanks
cruba001 said:
I have done everything exactly as described in the instructions, when i type abd devices in the cmd prompt i get the following message:
PS C:\Users\gunda\Desktop\Stylo2> adb devices
adb : The term 'adb' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\gunda\Desktop\Stylo2>
any suggestions or idea as to what is the problem?
thanks
Click to expand...
Click to collapse
That was completely my bad! I forgot I had setup adb and fastboot differently than in this guide, I updated the above post to reflect what you should actually be doing xD Thanks for catching that!~
Can i do this even though im an update behind?
Th3Joker2496 said:
Can i do this even though im an update behind?
Click to expand...
Click to collapse
I don't see why not, give it a shot, if it messes up let me know. I'll make a TWRP full system backup for you if it doesn't.
Dark Bulbasaur said:
I don't see why not, give it a shot, if it messes up let me know. I'll make a TWRP full system backup for you if it doesn't.
Click to expand...
Click to collapse
thx for the offer but instead i updated the phone lol im about to go through with the rooting process
---------- Post added at 01:57 AM ---------- Previous post was at 01:27 AM ----------
Hey i got stuck on step 5 it just stays saying <waiting for any device>
---------- Post added at 02:27 AM ---------- Previous post was at 01:57 AM ----------
so i got past step 5 but now it says error:cannot load 'recovery.img'
Please help me lower fw lg stylo 2 plus ms550. thank you
---------- Post added at 04:00 PM ---------- Previous post was at 03:57 PM ----------
Please help me unlock my bootload. ms550
Th3Joker2496 said:
thx for the offer but instead i updated the phone lol im about to go through with the rooting process
---------- Post added at 01:57 AM ---------- Previous post was at 01:27 AM ----------
Hey i got stuck on step 5 it just stays saying <waiting for any device>
---------- Post added at 02:27 AM ---------- Previous post was at 01:57 AM ----------
so i got past step 5 but now it says error:cannot load 'recovery.img'
Click to expand...
Click to collapse
Let's try directing the command towards the file instead of trying to launch it like normal. Just replace " E:/Phone/recovery.img " with what ever directory your recovery.img is in. I'll attach a photo for a better example.
Dark Bulbasaur said:
Let's try directing the command towards the file instead of trying to launch it like normal. Just replace " E:/Phone/recovery.img " with what ever directory your recovery.img is in. I'll attach a photo for a better example.
Click to expand...
Click to collapse
im so lost bro you have skype?
I got the message: "encryption was unsuccessful, the password is correct but the data is corrupt"
And then I have a button that says "reset" and that's it. When I click reset I'm taken back to TWRP. I don't know what to do from here. Am I bricked?
Th3Joker2496 said:
thx for the offer but instead i updated the phone lol im about to go through with the rooting process
---------- Post added at 01:57 AM ---------- Previous post was at 01:27 AM ----------
Hey i got stuck on step 5 it just stays saying <waiting for any device>
---------- Post added at 02:27 AM ---------- Previous post was at 01:57 AM ----------
so i got past step 5 but now it says error:cannot load 'recovery.img'
Click to expand...
Click to collapse
How did you get past part 5 ?...Just stuck at WAITING FOR DEVICE
BlackGTNinja said:
How did you get past part 5 ?...Just stuck at WAITING FOR DEVICE
Click to expand...
Click to collapse
I went into the earlier comments and saw someone say to do "adb reboot bootloader" before step 5 and it worked but i couldnt do anything past that it just reset my phone so if u try this stuff just make sure to backup your phone incase
Th3Joker2496 said:
I went into the earlier comments and saw someone say to do "adb reboot bootloader" before step 5 and it worked but i couldnt do anything past that it just reset my phone so if u try this stuff just make sure to backup your phone incase
Click to expand...
Click to collapse
Reflash TWRP on CMD and remove the battery and run twrp like in the instructions. Afterwards go to wipe, select format in TWRP and type "yes" (after you type "yes" the storage will be wiped. Nothing in internal storage.) and reboot to TWRP (make sure you got a sd card or computer to install rom). After the format, install rom. I don't know how to root on stock. Running LOS 64bit 7.1.2 on my Stylo 2 Plus.
Th3Joker2496 said:
I went into the earlier comments and saw someone say to do "adb reboot bootloader" before step 5 and it worked but i couldnt do anything past that it just reset my phone so if u try this stuff just make sure to backup your phone incase
Click to expand...
Click to collapse
It was the Android Fastboot drivers was not configured right,I had to go to Device Mangager and Manually update drivers to Bootloader interface
http://visualgdb.com/KB/usbdebug-manual/
I hv searched for many websites and they said you should unlock bootloader to go further.
But on lg stylo 2 plus bootloader can't be unlocked it is not available on website .
Can anyone suggest me what i should do to forcefully unlock my bootloader.
xpurge1 said:
I got the message: "encryption was unsuccessful, the password is correct but the data is corrupt"
And then I have a button that says "reset" and that's it. When I click reset I'm taken back to TWRP. I don't know what to do from here. Am I bricked?
Click to expand...
Click to collapse
no you're not. just go into twrp, format data, mount the device, move the folders, and try flashing SuperSU BEFORE no verity.
I can't seem to flash the recovery. OEM is unlocked and everything else is correct but when i go to the step to flash, it tells me it cant be flashed.