Database Info

Can Nokia 3 root

Hello guys i have Nokia 3 and i want to root it can i root it without any problems and after root can I recieve updates and am able to install it successfully?

I need help
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot

xdrucsix said:
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
Click to expand...
Click to collapse
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.

SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
Oh, Ok I can see, I have to wait :/

is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - "fastboot boot <recovery.img>"

the_laser said:
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - fastboot boot recovery <recovery.img>
Click to expand...
Click to collapse
i know that ta-1032 is for EU dual sim, ta-1028 is american single sim version but i think that there is no difference in hardware. he can try that command to see is that recovery works @xdrucsix
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
then you will see does it boot or not. twrp will disappear completely after you exit twrp.

I did every step that you say, nothing happened :/

something should definitely happen
at least show all fastboot.exe output during your tries

SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
The twrp dint even work for 1032..

Mithra siva said:
The twrp dint even work for 1032..
Click to expand...
Click to collapse
it worked for me and others, which method you tried?

SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only.. it was showing writing ..'recovery' failed..
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only..
It was showing ." Writing 'recovery'...failed (remote size too large)... Please help

SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
Bro say something

Mithra siva said:
Bro say something
Click to expand...
Click to collapse
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img

SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..

Mithra siva said:
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.

SkaboXD said:
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Click to expand...
Click to collapse
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Mithra siva said:
Thanks man it's done..
Click to expand...
Click to collapse
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot

Mithra siva said:
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Click to expand...
Click to collapse
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.

SkaboXD said:
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
Click to expand...
Click to collapse
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help

Mithra siva said:
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Click to expand...
Click to collapse
did you rebooted after uninstalling system apps?

SkaboXD said:
did you rebooted after uninstalling system apps?
Click to expand...
Click to collapse
It was showing uninstalling failed

Honor 6x BLN-L21C10B131 mode error

Hi, I think I flashed a wrong recovery on the phone and now it's in a loop and shows this message the restart again .
there is no recovery or system installed I tried a lot of methods (dload - Multi-Tool 8 - adb fastboot ....) to install a recovery and boot and nothing did work.
the phone boots only in fastboot mode when I press volume -
ERROR MODE
Attention!
please update system again
(picture of android robot thingy)
Error!
Func NO:11 (recovery image)
Error NO:2 (load failed!)
I don't understand because sometimes it shows in cmd that all was successfully installed but when I try to boot into the recovery nothing happens!
Any help or suggestions would be appreciated ,thanks.
PS: Latest version was installed: a custom ROM OREO 8.0

Nevermind, I've fixed it.
Thanks anyway.

Fed-uP said:
Nevermind, I've fixed it.
Thanks anyway.
Click to expand...
Click to collapse
How you fixed it plzz help me bro..I have tried everything not a single hope:crying:
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
I am able to boot into fastboot mode...plzz help me asap:crying:

mohsin.kadiwala said:
How you fixed it plzz help me bro..I have tried everything not a single hope:crying:
---------- Post added at 05:12 PM ---------- Previous post was at 05:11 PM ----------
I am able to boot into fastboot mode...plzz help me asap:crying:
Click to expand...
Click to collapse
Hi bro, can you tell me please how did your phone get broken?
What was the last firmware installed on the phone before it broke?
And is your phone the same edition as the one described above?

Fed-uP said:
Hi bro, can you tell me please how did your phone get broken?
What was the last firmware installed on the phone before it broke?
And is your phone the same edition as the one described above?
Click to expand...
Click to collapse
I think my system partion is damage because of that phone broken it's BLN-L22C675 EMUI 8.0 PATCH 1

mohsin.kadiwala said:
I think my system partion is damage because of that phone broken it's BLN-L22C675 EMUI 8.0 PATCH 1
Click to expand...
Click to collapse
Ok so you have the Indian branding.
The point is to get a recovery on the phone and to do that after a phone break like that is to first flash a kernel. With Oreo you need to to use a bit different commands than other android versions however you need to have a kernel.img for your phone edition (you can find one in Internet or extract it from the oreo version of your phone edition and once you have it boot into fastboot and run adb fastboot on your pc as administrator then type the following commands :
1- fastboot flash kernel (here you put the directory location of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
2- fastboot flash ramdisk (here you put the directory location again of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
3- fastboot flash recovery_ramdisk (here you put the directory location of where you have the recovery_ramdisk.img file FOR EXAMPLE: "C:\downloads\recovery_ramdisk.img") to download the TWRP
Remember to have the right imgs of the kernel and the recovery for you phone and the android version which is oreo in your case.
You should get no errors in cmd during the the process and you should be able to boot into recovery after accomplishing all that steps successfully.
Try this and tell me how it worked out for you.

Fed-uP said:
Ok so you have the Indian branding.
The point is to get a recovery on the phone and to do that after a phone break like that is to first flash a kernel. With Oreo you need to to use a bit different commands than other android versions however you need to have a kernel.img for your phone edition (you can find one in Internet or extract it from the oreo version of your phone edition and once you have it boot into fastboot and run adb fastboot on your pc as administrator then type the following commands :
1- fastboot flash kernel (here you put the directory location of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
2- fastboot flash ramdisk (here you put the directory location again of where you have the kernel.img file FOR EXAMPLE: "C:\downloads\kernel.img")
3- fastboot flash recovery_ramdisk (here you put the directory location of where you have the recovery_ramdisk.img file FOR EXAMPLE: "C:\downloads\recovery_ramdisk.img") to download the TWRP
Remember to have the right imgs of the kernel and the recovery for you phone and the android version which is oreo in your case.
You should get no errors in cmd during the the process and you should be able to boot into recovery after accomplishing all that steps successfully.
Try this and tell me how it worked out for you.
Click to expand...
Click to collapse
Kk..Ty's buddy I will try let u know..:good:

[HOW TO] Install + Root ULM Pie (21d and 20e) and add working TWRP /w stock!

Hey guys,
VIDEO TUTORIAL:
https://youtu.be/ylBSZk7EqcA o
Someone written a better tutorial or you can follow my video tutorial
https://docs.google.com/document/d/1fdeO9jmm8ewwRX_G0MaGHsVfIVtxgh0yRK0-Yypcl_E/edit?usp=drivesdk
Credits:
@loonycgb2 for the bootloader tutorial
@jsergan[/MENTION] for the root tutorial
@Zackptg5p and whoever helped him for this DM Verity and forceencrypt disabler

Where "21ULMD Kdz file"
I can't found it on web

Ahmed Ismael said:
Where "21ULMD Kdz file"
I can't found it on web
Click to expand...
Click to collapse
https://lg-firmwares.com/downloads-file/20303/G710ULM21d_00_NAO_US_OP_0711
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
Before I flash it I wanted to ask if you notice any performance difference between 11g (oreo) and 21d. Is it just as fast?

ninjamirage said:
https://lg-firmwares.com/downloads-file/20303/G710ULM21d_00_NAO_US_OP_0711
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
Before I flash it I wanted to ask if you notice any performance difference between 11g (oreo) and 21d. Is it just as fast?
Click to expand...
Click to collapse
I Cross-Flash G710ULM20 GFI
Performance increases

I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.

ninjamirage said:
I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.
Click to expand...
Click to collapse
Nah it works you can update it via twrp or direct install it.

Awesomeslayerg said:
Nah it works you can update it via twrp or direct install it.
Click to expand...
Click to collapse
Thanks. I don't think I need fastboot yet. I am not sure how to erase the LAF partition.

ninjamirage said:
I cross-flashed G710pm to G710ulm20e USA. Thanks OP and lge.fun
I only have to ask if you should let magisk manager download and install the updated zip (20.1). I decided not to because it may break the rooted boot image.
Click to expand...
Click to collapse
ninjamirage said:
Thanks. I don't think I need fastboot yet. I am not sure how to erase the LAF partition.
Click to expand...
Click to collapse
To zero it out use adb shell or the termrnial app then su
The do:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/laf_a
To get into download mode:
Theres two ways#
1. Get into fastboot mode and set current slot to b
Code:
fastboot --set-active=b
then reboot and hold the up button while its connectrc to your pc and you should be able to get into download mode
2. Boot into twrp, then tap reboot in the menu and on the bottom it should say slot a or b and select b. Then reboot. Dont worry about not being able to mount.

Awesomeslayerg said:
To zero it out use adb shell or the termrnial app then su
The do:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/laf_a
To get into download mode:
Theres two ways#
1. Get into fastboot mode and set current slot to b
Code:
fastboot --set-active=b
then reboot and hold the up button while its connectrc to your pc and you should be able to get into download mode
2. Boot into twrp, then tap reboot in the menu and on the bottom it should say slot a or b and select b. Then reboot. Dont worry about not being able to mount.
Click to expand...
Click to collapse
Is that for installing a custom rom?
Then do you need to do this?
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta_a.img

ninjamirage said:
Is that for installing a custom rom?
Then do you need to do this?
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta_a.img
Click to expand...
Click to collapse
Yes

This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!

CyborgSG said:
This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!
Click to expand...
Click to collapse
One person got it to work. I

Can you show the full details of your method, as I'm tried patch both img and it's work, but when I boot to download mode and connect to PC and open LGUp, it's always show unknown model, try flash the img it in fastboot many time, it's always happen like that

CyborgSG said:
This tutorial is trash, I'm tried everything but my device keep getting bricked and bootloop, pls delete it!
Click to expand...
Click to collapse
CyborgSG said:
Can you show the full details of your method, as I'm tried patch both img and it's work, but when I boot to download mode and connect to PC and open LGUp, it's always show unknown model
Click to expand...
Click to collapse
First don't call a tutorial trash cause you didn't do it properly and you didn't even detail the problem properly. . Second, make sure you're still on 11g firmware or go back to 11g firmware via download mode of you're not and then flash the abl partition from the unlocked bootloader tutorial if you havent used that abl. Then fastboot flash rooted 11g boot_a and boot_b file then reboot to firmware and make sure it boots all the way up and restart your PC then try going into download mode again if it works go into fastboot flash the 21ulmd booted rooted image both a and b then immediately restart to download mod

I'm on g710ulm11g and I'm rooted, updated the magisk to 20.1, now do I have to boot to fastboot and boot the twrp20ulmrooted img to boot_a and boot_b and then boot to download mode?

CyborgSG said:
I'm on g710ulm11g and I'm rooted, updated the magisk to 20.1, now do I have to boot to fastboot and boot the twrp20ulmrooted img to boot_a and boot_b and then boot to download mode?
Click to expand...
Click to collapse
Noo. Fastboot flash 21ulmrooted to both a and b then reboot to download mode.

question: I am rooted with magisk and on ULM21d. I have extracted the image file and renamed it "twrp21ulmdroot.img" and put this file on my internal storage /sdcard. When I run the command dd if=/sdcard/twrp21ulmdroot.img of=/dev/block/bootdevice/by-name/boot_a in adb shell (as root #) it keeps giving me a response of dd: /sdcard/twrp21ulmdroot.img: No such file or directory. The file is actually there. Any ideas?

way2aware said:
question: I am rooted with magisk and on ULM21d. I have extracted the image file and renamed it "twrp21ulmdroot.img" and put this file on my internal storage /sdcard. When I run the command dd if=/sdcard/twrp21ulmdroot.img of=/dev/block/bootdevice/by-name/boot_a in adb shell (as root #) it keeps giving me a response of dd: /sdcard/twrp21ulmdroot.img: No such file or directory. The file is actually there. Any ideas?
Click to expand...
Click to collapse
Are you sure you didn't name it twrp21ulmd.img.img? Or reboot the device.. Make sure it's where the Download, pictures etc.. folders are.

Awesomeslayerg said:
Noo. Fastboot flash 21ulmrooted to both a and b then reboot to download mode.
Click to expand...
Click to collapse
When I'm try to boot the twrp20ulmrooted to boot a and boot b, bcoz I want to root on g710ulm20e, then in command it's show up: cannot boot a boot.img *and* ramdisk, so what exactly command I have to use in adb and fastboot?

Awesomeslayerg said:
Are you sure you didn't name it twrp21ulmd.img.img? Or reboot the device.. Make sure it's where the Download, pictures etc.. folders are.
Click to expand...
Click to collapse
sir, your tutorial worked perfectly for me- I now for the first time since owning this phone have a custom recovery. Thank you for your help :good:
Edit: my problem earlier was that the image file was not installing to my internal storage in the right place for whatever reason... /sdcard was not available when searching my int storage. So I dropped the file into 'Download', then used Advanced tools pro file manager to grab it and paste it into the parent directory. At that point the shell commands worked

Rooting Android 9 December Update With Magisk (No TWRP)(Global)

- Make sure usb debugging is enabled in your developer options menu, your bootloader is unlocked and your critical partitions are unlocked. For instructions, visit https://developer.razer.com/razer-phone-dev-tools/general-instructions/?_ga=2.111753092.1097369801.1578321896-2010083175.1573219083?_ga=2.111753092.1097369801.1578321896-2010083175.1573219083
- Download and extract platform-tools to your desktop (for adb and fastboot functions) here http://https://developer.android.com/studio/releases/platform-tools
- Download the current release on Razers website here http://https://s3.amazonaws.com/cheryl-factory-images/cheryl-p-release-7083-user-full.zip or for a list of releases https://developer.razer.com/razer-phone-dev-tools/factory-images/. Unzip, and copy the boot.img to your phones internal storage.
-Download and install Magisk Manager on your device. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
-open Magisk Manager, and select install, and when prompted, select "select and patch a file". Choose the boot.img you put in your internal storage.
-Once patching is finished (the patched image will be in the same location as the original image), move the patched boot.img from your phone to your platform-tools folder (will be labeled "magisk_patched.img").
-right-click within the platform-tools folder and select "open powershell window here" or "open cmd prompt here".
-IF USING CMD:
Code:
adb reboot bootloader
-IF USING POWERSHELL:
Code:
./adb reboot bootloader
. Your device should restart and boot into the bootloader.
-next, flash the patched boot image to BOTH slots,
-IF USING CMD:
Code:
fastboot flash boot_a magisk_patched.img
and then
Code:
fastboot flash boot_b magisk_patched.img
-IF USING POWERSHELL:
Code:
./fastboot flash boot_a magisk_patched.img
and then
Code:
./fastboot flash boot_b magisk_patched.img
-Finally, restart your device and verify Magisk is installed via the Magisk Manager app, and that WiFi is working.
NOTE Keep the original boot.img because it can be flashed the same way to revert to stock.

Thanks for this, I had been waiting on a method to root the latest update and this looks like it. Will try it when I get a chance.

Working 100%, thanks again.
Sent from my Phone using Tapatalk

patient81 said:
Working 100%, thanks again.
Sent from my Phone using Tapatalk
Click to expand...
Click to collapse
You're welcome!

After I try flashing <waiting for any device> shows up and nothing happens help

plankton57 said:
After I try flashing <waiting for any device> shows up and nothing happens help
Click to expand...
Click to collapse
I PMed you, in case you still need help.

bdizthebiz said:
I PMed you, in case you still need help.
Click to expand...
Click to collapse
i faced the same issue send help

bdizthebiz said:
I PMed you, in case you still need help.
Click to expand...
Click to collapse
Im having the same issue, stuck on <waiting for any device> in powershell. is there a fix for this?

Anytime tried relocking bootloader after this method?

@bdizthebiz Can you explain what´s the trick please?
Edit: Nevermind. I´ve solved it changing usb driver to Android Bootloader Interface.

Lonewolf007ljp said:
Anytime tried relocking bootloader after this method?
Click to expand...
Click to collapse
no reason to relock your bootloader unless you're getting rid of your phone. Just keep it unlocked.

crombull said:
@bdizthebiz Can you explain what´s the trick please?
Edit: Nevermind. I´ve solved it changing usb driver to Android Bootloader Interface.
Click to expand...
Click to collapse
how to change to android bootloader interface?
---------- Post added at 07:48 AM ---------- Previous post was at 07:29 AM ----------
After I try flashing <waiting for any device> shows up and nothing happens. I tried so many methods and couple hours. please help

Fastboot issue
If you're having issues interacting with your device while its in fastboot, it could be because the appropriate drivers aren't installed. Please refer to this link;
https://s3.amazonaws.com/cheryl-factory-images/How_to_Install_Android_Fastboot_Drivers_on_Windows.pdf

error
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot_a Magisk_patched.img
error: cannot load 'Magisk_patched.img': No such file or directory

kevinc999 said:
how to change to android bootloader interface?
---------- Post added at 07:48 AM ---------- Previous post was at 07:29 AM ----------
After I try flashing <waiting for any device> shows up and nothing happens. I tried so many methods and couple hours. please help
Click to expand...
Click to collapse
I changed the properties of the android device in device manager as bdizthebiz user said.

crombull said:
I changed the properties of the android device in device manager as bdizthebiz user said.
Click to expand...
Click to collapse
did that already. still same results

Sorry. I cannot help you. Perhaps using another PC...

Hi, thanks for your guide but before I attempt I am on the November 2019 Security Patch (Android 9), does this matter or do you not know? Sorry if it's a silly question.

this method work for oreo or not?

TWRP

I need a twrp test can someone test it
Join Group TG Redmi9A_Official

Hi, I have a friend who comes around 9am this morning, I have already tested all the methods to try to root this model redmi 9a dandelion but there is nothing to do, you need a TWRP no choice, I want to test the holds if you have one. But I can test that when my friend is there, he is the one who has redmi 9a and I confirm I have unlocked his bootloader

I have a redmi 9a but I need a twrp for it. I can test twrp for redmi 9a

Hi i'm dev and i got redmi 9a today but i'm waiting for bootloader.
I'm gonna make one and you can test it.

Tigrouzen said:
Hi i'm dev and i got redmi 9a today but i'm waiting for bootloader.
I'm gonna make one and you can test it.
Click to expand...
Click to collapse
Waiting for your good news, bro

Ssmiles said:
Hi, I have a friend who comes around 9am this morning, I have already tested all the methods to try to root this model redmi 9a dandelion but there is nothing to do, you need a TWRP no choice, I want to test the holds if you have one. But I can test that when my friend is there, he is the one who has redmi 9a and I confirm I have unlocked his bootloader
Click to expand...
Click to collapse
did you try VBMETA Patched Image method?

yes I tried, the orders pass well no error but no change afterwards !!!

Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW

Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
Click to expand...
Click to collapse
I will wait till you solve the issue and thanks in advance

Does not boot
Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.
Click to expand...
Click to collapse

I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.[/QUOTE]
how to do this?

qqpin said:
I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.
Click to expand...
Click to collapse
how to do this?[/QUOTE]
adb reboot bootloader
fastboot boot recovery.img (Here we replace "flash" with "boot" so in case recovery does not work, we don't have it flashed in system)

Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW
Click to expand...
Click to collapse
are you able to root it with magisk using your recovery?

ahsan.ey.ca said:
how to do this?
Click to expand...
Click to collapse
adb reboot bootloader
fastboot boot recovery.img (Here we replace "flash" with "boot" so in case recovery does not work, we don't have it flashed in system)[/QUOTE]
not working

News need adapt fstab for 9A also data is encrypted

Tigrouzen said:
News
Click to expand...
Click to collapse
I tried to boot it but it did not take me to recovery, instead normal restart. How did you install it? M not a developer, so please guide.

ahsan.ey.ca said:
I tried to boot it but it did not take me to recovery, instead normal restart. How did you install it? M not a developer, so please guide.
Click to expand...
Click to collapse
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
https://gofile.io/d/jp6i3z

Tigrouzen said:
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
https://gofile.io/d/jp6i3z
Click to expand...
Click to collapse
If Magisk is not working, can we install superSu with your recovery? Will it work?

ahsan.ey.ca said:
If Magisk is not working, can we install superSu with your recovery? Will it work?
Click to expand...
Click to collapse
for the moment can't mount system

Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW
Click to expand...
Click to collapse
Tigrouzen said:
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
[]
Click to expand...
Click to collapse
I flashed twrp and I can see the twrp in my phone but it does not recognize my touch input.
so that's why I cannot swipe for modification
any fix for that?