Database Info

How to install Stock rom for bricked Android One by using 'Fastboot'? (Links updated)

Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img', 'bootloader.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot flash bootloader bootloader.img
press enter.
viii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button.

Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*ﾟ▽ﾟ)ﾉ
sent from xda app in my s710 using tapatalk . (*ﾟ▽ﾟ)ﾉ

andywoody12 said:
Will it work on any devices? I don't know where this bootloader is. I only have stock system recovery and everytime I flash i get error like "installation aborted " I also use spflash tools but it cant detect my phone. By the way can i use an option in my system recovery like "install using adb" to flash using your way?
Please submit a reply.
Thanks
(*ﾟ▽ﾟ)ﾉ
sent from xda app in my s710 using tapatalk . (*ﾟ▽ﾟ)ﾉ
Click to expand...
Click to collapse
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.

androidoverdoze said:
Sorry for the late reply. May I know what is the model of your device? You will need to go to the fastboot mode.
Install using adb works only for .zip files not for .img files. And also there are separate codes for adb method. At first I need to know your device model.
Click to expand...
Click to collapse
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...
Sent from my S710 using XDA Free mobile app

andywoody12 said:
Oh. Ty for response... I already manage to learn... I only forgot the "bootloader" but.. Can i use your method in other chipset as like the A33? Because i cant find a cwm recovery for it to test on this device chipset...
Sent from my S710 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately?

androidoverdoze said:
Yes, you can, if you can get access to the bootloader menu.
Can you please provide you device name so that I can help you more accurately?
Click to expand...
Click to collapse
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?
Sent from my S710 using XDA Free mobile app

andywoody12 said:
This device is not popular because i bought it local.. Device name: Royqueen
Device model: rq739
Device chipset: allwinner A33
Stock recovery, no cwm for it. Does anyone already made a recovery system for it?
Sent from my S710 using XDA Free mobile app
Click to expand...
Click to collapse
So, its a tablet pc. Ok if you can get access to the bootloader menu then only my procedure is possible.Actually you do not need any CWM recovery for getting into the bootloader menu. It comes up when you switch on your device by pressing the volume up and the power button at the same time.

Thankyouu so much bro,my phone was not getting detected by sp flash tool and i wanted to downgrade to kitkat.
This really helped me!

nipun2309 said:
Thankyouu so much bro,my phone was not getting detected by sp flash tool and i wanted to downgrade to kitkat.
This really helped me!
Click to expand...
Click to collapse
I'm happy to hear it that, it helped. I'm glad to help you. If have any problem just let me know it. I will help you.

Help needed !!
androidoverdoze said:
I'm happy to hear it that, it helped. I'm glad to help you. If have any problem just let me know it. I will help you.
Click to expand...
Click to collapse
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]

AgentJT said:
My Android One is bricked. Whenever I try to flash any custom recovery or ROM, it shows "Partition Table does not exist", but I want to try your method. I have MarshMallow Stock ROM and CM13. Tell me how do I get all these required image files as I am not able to find them. Please reply asap [Puppy eyes, if they help :fingers-crossed: ]
Click to expand...
Click to collapse
In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.

androidoverdoze said:
Bricked your Android one?? Can't install or phone not getting detected by SP Flash tool? Don't worry. This is the common problem for many users including me. My phone was not getting detected by SP flash tool. I tried many ways so that my phone gets detected, but I failed. Then I read about the 'Fastboot' method and got success. Now I am sharing the whole method with you all.
At first you will need the Adb fastboot Programs only, Adb Driver, The device driver and the Stock ROM of android one.
Last but not the least, an android one with the bootloader unlocked.
Now you are ready lets begin with the procedure.
1) Extract the 'Adb fastboot Programs only' in a folder any where in the PC (Better make a folder in the desktop and extract there).
2) Install the drivers.
3) Extract the rom and then copy the 'system.img', 'userdata.img', 'boot.img', 'recovery.img' and 'cache.img' to the 'Adb fastboot Programs only' folder.
4) Now turn on the phone by pressing the volume up and the power button simultaneously, which will bring you to the bootloader menu. There go to the fastboot option by pressing the volume up button and selecting it by pressing the volume down button. This will activate fastboot mode. Now connect the phone with the PC via USB.
5) Open the 'Adb fastboot Programs only' folder. There press shift key and right click and select 'Open command window here' option. Command prompt will open. Now there follow these simple commands.
6) i)
Code:
fastboot flash system system.img
press enter. When it completes........
ii)
Code:
fastboot flash userdata userdata.img
press enter. When it completes........
iii)
Code:
fastboot flash boot boot.img
press enter. When it completes........
iv)
Code:
fastboot flash recovery recovery.img
press enter. When it completes........
v)
Code:
fastboot erase cache
press enter. When it completes........
vi)
Code:
fastboot flash cache cache.img
press enter. When it completes........
vii)
Code:
fastboot reboot
press enter.
7) Now you are done. Wait for at least 10 mins. as the initial boot takes time.
If there is any problem let me know.
If I helped you press the "Thanks' button.
Click to expand...
Click to collapse
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
androidoverdoze said:
In this case u need factory image of the stock rom. Unfortunately the factory image of the Android 6.0 for Android One isn't still available. But u can flash android 5.1 factory image.
With all the above code just add " fastboot flash bootloader bootloader.img "
I am providing the link of the factory image of android 5.1
https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Soon I will be releasing a Android One flashing tool. Stay tuned.
Happy flashing.
Click to expand...
Click to collapse
where to use this zip file i hv dowloaded it plz help my phone is bricked

stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661

stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
I have released the Android one flash tool.
Visit this page http://forum.xda-developers.com/cro...lick-flash-t3339494/post65921661#post65921661

stan1996 said:
its not working it is just showing the micromax s logo and nothing else i waited for 30 minutes
---------- Post added at 01:42 PM ---------- Previous post was at 01:37 PM ----------
where to use this zip file i hv dowloaded it plz help my phone is bricked
Click to expand...
Click to collapse
I have released the Android one flash tool.
Visit this. http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661

androidoverdoze said:
If I am not wrong your present rom is Android 6.
In this case you need to copy the bootloader.img too and add one more command
fastboot flash bootloader bootloader.img
Now it will boot.
I have released Android one flash tool. Download it from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-flashtool-one-click-flash-t3339494/post65921661#post65921661
Click to expand...
Click to collapse
ihv downloaded your android one flash tool its very useful thanks
my phone is still not booting up

stan1996 said:
ihv downloaded your android one flash tool its very useful thanks
my phone is still not booting up
Click to expand...
Click to collapse
Did u download the rom? If not, then download the rom and extract it to the AOnePro installation folder. Then boot your phn to the bootloader and activate fastboot mode and one by one flash the files. Link for rom https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg

androidoverdoze said:
Did u download the rom? If not, then download the rom and extract it to the AOnePro installation folder. Then boot your phn to the bootloader and activate fastboot mode and one by one flash the files. Link for rom https://drive.google.com/uc?id=0B6u4uzyz6jM3NWZNb2l4dkxDNzg
Click to expand...
Click to collapse
where is the AOnePro installation folder??

stan1996 said:
where is the AOnePro installation folder??
Click to expand...
Click to collapse
It is the folder where the AOnePro gets installed. C: -> Program files (x86) -> ZedSofts -> AOnePro

Help Guys....
Yesterday, I was flashing twrp recovery from android one toolkit.
Before I was using Philz touch recovery.
after Installing twrp, whenever I tried to boot my device it directed to recovery mode and the image of twrp stucks.
even If I open reccovery mode from an alternative way...it stucks in the twrp screen "teamwin".
Help guys how to get my phone back.
will the given method will work for it?
I yes, can I use AndroidOne Toolkit for using installing recovery again?
---------- Post added at 03:03 PM ---------- Previous post was at 03:00 PM ----------
Can I use this method on cm13 rom?

Bricked Huawei Honor P6 H60-L04

Hello guys, i need your help to unbrick my phone. First of all what i did to brick it was to unlock the boot loader, then used the Honor 6 Multi Tool to get a Cwm on it with it, it was EMUI 3.1 in the choosing. After that my phone restarted and now its hung up at Honor sign, and i can only access Fastboot mode but not recovery. I tried already playing new flashes on it with cust, boot, system and recovery and got a update on my sd card but it didnt work, it doesnt recognize my update and still only shows the honor screen, can anyone help me? Much appreciated

I have the same problem as you... but i don't know the basic informations about the phone (like model , IMEI or other stuff)... so i need help to... THANKS

To successfully unbrick it, follow these exact steps and you'll be good to go.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.

DigiGoon said:
To successfully unbrick it, follow these exact steps and you'll be good to go.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Click to expand...
Click to collapse
While flashing the above commands, the phone needs to be in fastboot mode right? How to get it in the fastboot mode?

DigiGoon said:
To successfully unbrick it, follow these exact steps and you'll be good to go.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Click to expand...
Click to collapse
I tried and I all the commands failed, look at the image below :

I'm stuck on this for about half an hour...
Someone please provide some suggestions.

You should consider this solution:
Tested method to repair bricked Honor 6
Until now worked for everybody who tried.

neil.richard said:
I tried and I all the commands failed, look at the image below :
Click to expand...
Click to collapse
Is your bootloader unlocked?

muradulislam said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
No it's locked. I was unable to get the unlock code from Huawei, am trying for the last 1 month.

neil.richard said:
No it's locked. I was unable to get the unlock code from Huawei, am trying for the last 1 month.
Click to expand...
Click to collapse
Try to get the unlock code coz the message
Remote command not allowed
Is because of bootloader still being locked. There is a way if you can start a chat with honor representative and ask him to give you the code.

There is a unlock code calculator, use it.
https://www.emui.com/en/plugin.php?id=unlock&mod=detail

neil.richard said:
I'm stuck on this for about half an hour...
Someone please provide some suggestions.
Click to expand...
Click to collapse
It's trying to install from Huawei hi suite on PC. Take the USB off and try again.

Blank screen bln-al30

Hello, i'm new here.
Please be patinet.
Basicly i bricked my honor 6x.
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
fastboot devices
show my device
any other fastboot option says Operation failed.
Can anybody help me?
Thank you

You tried dload method with correct firmware ??
I mean the exactly same build no wich you had before unlocking??

MapiospaMino said:
Hello, i'm new here.
Please be patinet.
Basicly i bricked my honor 6x.
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
fastboot devices
show my device
any other fastboot option says Operation failed.
Can anybody help me?
Thank you
Click to expand...
Click to collapse
Try adb reboot bootloader if it works tell me also try going into recovery via button combo power+Volume up if any of this work u will be able to fix

narshi shukla said:
You tried dload method with correct firmware ??
I mean the exactly same build no wich you had before unlocking??
Click to expand...
Click to collapse
Yes, i did.
Before flashing BLN-L21 firmware, i flashed BLN-AL30 firmware but it failed.
Did it a couple of time.
But with dc phoenix said that there were bln-l21 related firmware on, that's why i did dload method with BLN-L21 Firmware

xRevengerZee said:
Try adb reboot bootloader if it works tell me also try going into recovery via button combo power+Volume up if any of this work u will be able to fix
Click to expand...
Click to collapse
Already tried and just blank screen.

MapiospaMino said:
Already tried and just blank screen.
Click to expand...
Click to collapse
So sorry bro im also new and this is all i know but you must have done somthing worng while debranding can you tell me how you exactly rebranded and what guide you followed

xRevengerZee said:
So sorry bro im also new and this is all i know but you must have done somthing worng while debranding can you tell me how you exactly rebranded and what guide you followed
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one

MapiospaMino said:
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one
Click to expand...
Click to collapse
WIt for shank to arrive he will surely help you

How about restoring using erecovery?

MapiospaMino said:
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one
Click to expand...
Click to collapse
Try this for debranding to see if it makes any difference.
https://forum.xda-developers.com/honor-6x/how-to/guide-debranding-to-india-variant-bln-t3679402
xRevengerZee said:
WIt for shank to arrive he will surely help you
Click to expand...
Click to collapse
shank is for me? if it I will try my best if not then also I will help
---------- Post added at 10:03 AM ---------- Previous post was at 10:00 AM ----------
MapiospaMino said:
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
Thank you
Click to expand...
Click to collapse
Have you flashed the OEM info of L21 model?
Try flashing the 2nd file i.e. data file. Dont worry just put the file in dlaod and flash it. I was in same situation, and it was just a black screen while booting for 15 minutes. Flashed the 2nd file i.e. data file and it came up fine.
Try and report.
---------- Post added at 10:05 AM ---------- Previous post was at 10:03 AM ----------
itisiryan said:
How about restoring using erecovery?
Click to expand...
Click to collapse
It wont do with error unable to fetch firmware for you.
---------- Post added at 10:08 AM ---------- Previous post was at 10:05 AM ----------
MapiospaMino said:
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Click to expand...
Click to collapse
What was your earlier build number? If it was Nougat, you should flash only Nougat version and not B131 for L21 as it will be MM based.

Sorry for being away @shashank1320
I copied in dload path on sd card this: http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
then tried with this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
But i cannot use dload method, because it won't turn on.
The device is recognized in fastboot if connected to pc through usb, but it's just a black screen(no powered)
http://prntscr.com/h04zig
edit 1: it's recognized as this by my computer
http://prntscr.com/h051dd

MapiospaMino said:
Sorry for being away @shashank1320
I copied in dload path on sd card this: http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
then tried with this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
But i cannot use dload method, because it won't turn on.
The device is recognized in fastboot if connected to pc through usb, but it's just a black screen(no powered)
http://prntscr.com/h04zig
edit 1: it's recognized as this by my computer
http://prntscr.com/h051dd
Click to expand...
Click to collapse
Use files in reverse order.
First use this file
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
Then http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
I hope you are doing it correctly with first unzipping the zip files and then putting the contents in dload folder and use dload method. It will work

shashank1320 said:
Use files in reverse order.
First use this file
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
Then http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
I hope you are doing it correctly with first unzipping the zip files and then putting the contents in dload folder and use dload method. It will work
Click to expand...
Click to collapse
Like this
http://prntscr.com/h05gkw
but still display wont turn on
usb cable isn connected

MapiospaMino said:
Like this
http://prntscr.com/h05gkw
but still display wont turn on
usb cable isn connected
Click to expand...
Click to collapse
Yes exactly. I hope this is under sd card and you are pressing keys correctly.

shashank1320 said:
Yes exactly. I hope this is under sd card and you are pressing keys correctly.
Click to expand...
Click to collapse
Yes E:\ is SDCard path
And i'm pressing vol - + vol + and power button simultaneosly
edit:
fastboot getvar rescue_version
rescue_version: rescue0.3
fastboot getvar rescue_phoneinfo
rescue_phoneinfo: BLN-L21C10B131
fastboot oem get-product-model
BLN-L21
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem get-psid
SN:YCP7N1760XXXXXXX
IMEI:8625100XXXXXXXX
IMEI1:86251XXXXXXXXX
Can get only this value from fastboot

MapiospaMino said:
Yes E:\ is SDCard path
And i'm pressing vol - + vol + and power button simultaneosly
edit:
fastboot getvar rescue_version
rescue_version: rescue0.3
fastboot getvar rescue_phoneinfo
rescue_phoneinfo: BLN-L21C10B131
fastboot oem get-product-model
BLN-L21
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem get-psid
SN:YCP7N1760XXXXXXX
IMEI:8625100XXXXXXXX
IMEI1:86251XXXXXXXXX
Can get only this value from fastboot
Click to expand...
Click to collapse
Have you solved the problem?

buhar72 said:
Have you solved the problem?
Click to expand...
Click to collapse
No, i didn't solve this issue yet

Anyone can help me?

Can Nokia 3 root

Hello guys i have Nokia 3 and i want to root it can i root it without any problems and after root can I recieve updates and am able to install it successfully?

I need help
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot

xdrucsix said:
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
Click to expand...
Click to collapse
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.

SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
Oh, Ok I can see, I have to wait :/

is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - "fastboot boot <recovery.img>"

the_laser said:
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - fastboot boot recovery <recovery.img>
Click to expand...
Click to collapse
i know that ta-1032 is for EU dual sim, ta-1028 is american single sim version but i think that there is no difference in hardware. he can try that command to see is that recovery works @xdrucsix
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
then you will see does it boot or not. twrp will disappear completely after you exit twrp.

I did every step that you say, nothing happened :/

something should definitely happen
at least show all fastboot.exe output during your tries

SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
The twrp dint even work for 1032..

Mithra siva said:
The twrp dint even work for 1032..
Click to expand...
Click to collapse
it worked for me and others, which method you tried?

SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only.. it was showing writing ..'recovery' failed..
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only..
It was showing ." Writing 'recovery'...failed (remote size too large)... Please help

SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
Bro say something

Mithra siva said:
Bro say something
Click to expand...
Click to collapse
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img

SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..

Mithra siva said:
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.

SkaboXD said:
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Click to expand...
Click to collapse
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Mithra siva said:
Thanks man it's done..
Click to expand...
Click to collapse
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot

Mithra siva said:
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Click to expand...
Click to collapse
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.

SkaboXD said:
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
Click to expand...
Click to collapse
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help

Mithra siva said:
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Click to expand...
Click to collapse
did you rebooted after uninstalling system apps?

SkaboXD said:
did you rebooted after uninstalling system apps?
Click to expand...
Click to collapse
It was showing uninstalling failed

[GUIDE] Fix device automatically rebooting after few seconds of booting.

If you are having a weird bootloop where the phone just reboots after few seconds of booting like shown here (https://www.youtube.com/watch?v=3YcWsWYQVGQ) then you're in the right place, here's how you can fix the issue.
Before proceeding make sure you know your risks as I am not responsible for bricked devices, dead SD cards, thermonuclear war and anything really.
Steps:
1) Download Mi Flash Tool and install it. (For the drivers, skip it if you have installed the drivers already)
2) Download and Install minimal ADB and Fastboot Tool, persist.img and temporary twrp.img links will be below.
3) Copy the persist.img to your internal storage.
4) Copy the recoveryxx.img to same folder where you've saved the minimal ADB/Fastboot tool.
4) Goto the minimal adb fastboot tool folder where you had put the recoveryxx.img
5) Open cmdhere.exe
6) Put your phone in fastboot mode (Volume - and Power)
7) Type the following commands:
- fastboot devices (you should something like this:
Fastboot dsad5454sfs, If not, re-install the the fastboot drivers correctly. )
- fastboot oem unlock (This is just for unlocking the bootloader you can just skip it if you have unlocked bootloader.)
- fastboot boot recoveryxx.img *(basically the filename of the image file.)
Now you will boot to the temporary twrp and once you're there follow these steps:
8) Open Terminal in TWRP Custom Recovery (go to “Advanced” > “Terminal”).
9) Type the following command:
- dd if=/sdcard/persist.img of=/dev/block/mmcblk0p27
10) Go to reboot and select system and that's it!
Voila!
Minimal ADB and Fastboot tool: https://forum.xda-developers.com/sho....php?t=2317790
Mi Flash Tool: http://c.mi.com/thread-235054-1-1.html
TWRP Recovery: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472 , download the recovery3/2x.img according the android version your on.
Persist(Using this persist.img file is a must) : https://xiaomifirmware.com/download-link/?dlm-dp-dl=7270

Couldn't flash, Error: This image isn't allowed download.

tajamulbaba said:
Couldn't flash, Error: This image isn't allowed download.
Click to expand...
Click to collapse
Have you unlocked the bootloader? If you have and it's showing that error then download the august fastboot ROM and use that persist.img.

Edwin Hamal said:
Have you unlocked the bootloader? If you have and it's showing that error then download the august fastboot ROM and use that persist.img.
Click to expand...
Click to collapse
Yes I've unlocked bootloader, August ROM is nowhere available.

tajamulbaba said:
Yes I've unlocked bootloader, August ROM is nowhere available.
Click to expand...
Click to collapse
Available here (first result of Google search for "mi a1 firmware").

_mysiak_ said:
Available here (first result of Google search for "mi a1 firmware").
Click to expand...
Click to collapse
Thanks for the link, I downloaded and extracted the persist.img, it still shows the error.

tajamulbaba said:
Thanks for the link, I downloaded and extracted the persist.img, it still shows the error.
Click to expand...
Click to collapse
Try other builds then, that occurs if the size of persist.img is different than what your partition allows. For most the August one should work.

Does this break SafetyNet?

No!
ltf_195 said:
Does this break SafetyNet?
Click to expand...
Click to collapse
Nooo. What even makes you think it does?

Could you update the persist file? mine stuck on oreo..
So basically is it working on any nougat build?

awandroid89 said:
Could you update the persist file? mine stuck on oreo..
So basically is it working on any nougat build?
Click to expand...
Click to collapse
I've updated the guide the new one works no matter what.

Edwin Hamal said:
I've updated the guide the new one works no matter what.
Click to expand...
Click to collapse
Hi..successful to flash the file on august firmware but problem still happen. Do you know why?

TWRP
tajamulbaba said:
Couldn't flash, Error: This image isn't allowed download.
Click to expand...
Click to collapse
Use the twrp method as in this thread:
https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restrore-persist-partition-t3765643
Had the same problem, used twrp

CoolPlushBear said:
Use the twrp method as in this thread:
https://forum.xda-developers.com/mi-a1/how-to/guide-how-to-restrore-persist-partition-t3765643
Had the same problem, used twrp
Click to expand...
Click to collapse
I've updated my method too.

could you explain why does this happens?

Help me.
IMEI= 0
How to fix it?

Step 7.1 adb devices
Step 7.2 adb push persist.img /sdcard
Worked in my case.
Thanks
---------- Post added at 03:12 AM ---------- Previous post was at 03:10 AM ----------
Now i need to fix my IMEI

...

this can not find file on twrp terminal how i can flash it

Can I re-lock bootloader?
Hi,
Flashing the persist.img seems to have resolved the issue for me also, once I have completed the steps in the guide can I re-lock the bootloader?
I assume as we didn't flash TWRP and only booted into it temporarily should be fine?
Thanks