I recently rooted my j7 with cf one click. Then I realized I needed Twrp because it didn't come with the package. successfully flashed twrp with odin via pc. successful root. everything fine till I tried to flash the enigma rom note experience? phone was stuck in a boot loop. got the loop to stop by accessing twrp. now I'm able to access both download mode and twrp. when I just turn the phone on though it shows the battery charging icon and in the top corner says in red odin mode then in white product name:sm-j700p
current bianary:custom
system status:custom
fap lock: off
Knox warranty void; 0x1 (4)
qualcomm secure boot: enable (csb)
ap swrev: s1, t1, h1, r1, a 1, p1
secure download : enable
before the flash attempts I had developer options on as well as debugging. I also had the bootloader set to oem.
just a min ago I tried to flash a stock optimized rom and got error7. I have tried downloading stock roms. but they weren't zips I cant get anything to work. I have odin on my laptop. my phone isn't recognized by the computer. so I'm having to down load zips to my SD on my s7 edge and transfer the card to the j7.
I'm sure this is a simple thing I'm Messing up.
if the question has been asked I apologize.
I have worked for two days on this and can not get it together. please help
Code:
ODIN MODE
...
PRODUCT NAME is J7ELTE
FRP LOCK is OFF
...
WARRANTY VOID = 1 (0x0500)
RP SWREV are B=3; K=0; S=1
...
Warrant void is YES; bricks have been 3 times; Rescues under Kies have been NEVER
PS: Actual bricks have been 10+ times while upgrading fw of MM under Heimdall thru my Mac
The question is: what are revision S and 0x0500 stood for? And why bricking causes ANY PC not recognizing my phone under MTP?
Finally what are FRP and RP thanks?
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
YaQub420 said:
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
Click to expand...
Click to collapse
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
shiko2007 said:
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
Click to expand...
Click to collapse
I tried and nothing works
Have you tried it on another pc/laptop? Also does the phone charge okay?
YaQub420 said:
I tried and nothing works
Click to expand...
Click to collapse
ok bro , try clean your micro usb socket by using a can of compressed air and wait 1 min before connect any cable , after clean you can try this way may be help you :
-when you enter to download mode screen that have two option (vol.down to restart & vol.up to continue) connect your phone first and after that hold vol.up ) and see if odin added your device or not .
-if also not work with you try reboot device while you connected phone and enter to download mode
i suggest to remove any old driver of Samsung and install the latest driver that you can download from this link:
http://samsungusbdriver.com/wp-content/uploads/Samsung-Usb-Driver-v1.5.63.0.zip
also try odin version 3.11.1 that recommend for marshmallow firmware
I tried installing xposedinstaller a month ago, when trying to update it my phone got stuck in a bootloop. Only menu i can acces is ODIN by pressing Volume down, lock and home button. How do i flash a rom from a mac? It doesn't even see my phone when i plug it it. I tried everything for the past 5 hours and nothing works.
Odin Mode
Product Name : SM-G920F
Current Binary : Custom
System Status : Custom
Reactivation Lock : Lock
Secure Download : Enabled
Knox Warranty Void : 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Kirito619 said:
I tried installing xposedinstaller a month ago, when trying to update it my phone got stuck in a bootloop. Only menu i can acces is ODIN by pressing Volume down, lock and home button. How do i flash a rom from a mac? It doesn't even see my phone when i plug it it. I tried everything for the past 5 hours and nothing works.
Odin Mode
Product Name : SM-G920F
Current Binary : Custom
System Status : Custom
Reactivation Lock : Lock
Secure Download : Enabled
Knox Warranty Void : 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Click to expand...
Click to collapse
Use Heimdall For Mac
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
jwoegerbauer said:
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
Click to expand...
Click to collapse
and if its not? does that mean i should just throw out the thing?
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
First of all I want to ask you is did you root it or tried to do anything with stock firmware ???
astralc said:
does that mean i should just throw out the thing?
Click to expand...
Click to collapse
I'm afraid, but it seems that you'll have to do it
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
Did you install Samsung USB Drivers from the official website?
I suggest you to use a USB port directly on the motherboard.
Restart your pc after the USB driver is installed.
Goodluck flashing the stock firmware, I believe you should be able to revive easily .