I recently rooted my j7 with cf one click. Then I realized I needed Twrp because it didn't come with the package. successfully flashed twrp with odin via pc. successful root. everything fine till I tried to flash the enigma rom note experience? phone was stuck in a boot loop. got the loop to stop by accessing twrp. now I'm able to access both download mode and twrp. when I just turn the phone on though it shows the battery charging icon and in the top corner says in red odin mode then in white product name:sm-j700p
current bianary:custom
system status:custom
fap lock: off
Knox warranty void; 0x1 (4)
qualcomm secure boot: enable (csb)
ap swrev: s1, t1, h1, r1, a 1, p1
secure download : enable
before the flash attempts I had developer options on as well as debugging. I also had the bootloader set to oem.
just a min ago I tried to flash a stock optimized rom and got error7. I have tried downloading stock roms. but they weren't zips I cant get anything to work. I have odin on my laptop. my phone isn't recognized by the computer. so I'm having to down load zips to my SD on my s7 edge and transfer the card to the j7.
I'm sure this is a simple thing I'm Messing up.
if the question has been asked I apologize.
I have worked for two days on this and can not get it together. please help
Related
I tried to root my S6 using a method posted on here. However something messed up and my phone is i guess (soft bricked)
I have tried MANY different step by step guides with no help at all.
My phone either sits on the "Use smart switch for emergency recovery" or i can get into the ODIN mode, but that's it.
I downloaded the correct firmeware G920PVPU3CPB6_G920PSPT3CPB6_G920PVPU3CPB6_HOME.tar
Opened Odin 3.10.7
Clicked AP
Loaded the PB6
And everytime i attempt to get this to stock it stops at Pit Mapping and fails.
I have changed ports, USB cables, Redownloaded all the USB drivers etc and still can't get my phone to do anything.
Just now, I tried opening the One CLick Root, (just to see) and it doesn't even pick up my phone in Debug Mode, *saying its not in usb debugging* which i know100% i put it in that when i first started or tried to root.
Anyhow
ALL I am needing to do is get my phone back to working order, idc if it's back to stock or not. As long as it works. But i have tried everything i could find, and have had no luck at all.
Some one PLEASE walk me through what i need to do.
RECAP:
Downloaded Odin 3.10.7
Downloaded stock firmware
Gets stuck at Get Pit Mapping then FAILS
From the Odin Screen this is what is listed
Product: SM-G920P
Current Binary: Custom
System Stats: Official
FRP LOCK : OFF
Secure Download : Enabled
KNOX Warranty Void : 0 (0x0000)
RP SWREV: B: 3 K:2 S:2
If anyone can please help get this back in working order i'd be SUPER appreciative.
ALSO: I've tried connecting to Smart Switch to do the Emergency Recovery, but it keeps telling me my SN is incorrect. Dunno why i got it right off the box,lol
ALSO: KIES3 says it isnt a reconized device aswell....
Re-Partition in Odin is OFF right?
DavideRodeo said:
Re-Partition in Odin is OFF right?
Click to expand...
Click to collapse
Correct
Hey guys, I'm new here...
Well yesterday my dad bought me a Samsung Galaxy Grand Prime+ SM-G532F (vodafone, South Africa).
I wanted to root it( i always used to use KingoRoot) but i found a thread with an exploit to root the SM-G532F/M/G or something like that. Anyways i used it and flashed the "root-boot.tar" and followed all the steps( Enabled OEM unlocking and usb debugging) and i had root access and everything was perfect.
Then i thought i didn't need the OEM unlocking and the usb debugging anymore so i disabled both. Then afterwards i rebooted my phone( Because i had just installed Magisk so i could play pokemon go on a jailbroken device and it required a reboot.).
As it restarted, I got this message on a light blue screen( i don't think it even booted), "Security Error: This phone has been flashed with unauthorised software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I think this is because of disabling the OEM unlocking. I tried flashing a stock ROM(it was really small though, but am downloading a 1.5Gb one right now) using odin while in download mode( The phone doesn't have a recovery menu to wipe/factory reset. It goes straight to download mode) and it appears that the custom binary (boot.img) is being blocked by the FRP lock.
Here is what appears when i go into recovery(well download mode):
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G532F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0x1 (0x302)
MTK SECURE BOOT: ENABLE
AP SWREV: B1 K0 S0
SECURE DOWNLOAD: ENABLE
I can't use ADB because it doesn't even appear if i try "adb devices" it is completely blank. But in odin it shows 0:[COM4]. Is this because my usb debugging is disabled? Can i flash with odin if usb debugging is disabled? If not, is there a way to enable usb debugging with the phone only in download mode( As in no ADB recovery or updating from sd card etc).
Please help. I really need to fix this. Even if i lose everything on the phone it's fine since i only got it yesterday.
nullbyte001 said:
Hey guys, I'm new here...
Well yesterday my dad bought me a Samsung Galaxy Grand Prime+ SM-G532F (vodafone, South Africa).
I wanted to root it( i always used to use KingoRoot) but i found a thread with an exploit to root the SM-G532F/M/G or something like that. Anyways i used it and flashed the "root-boot.tar" and followed all the steps( Enabled OEM unlocking and usb debugging) and i had root access and everything was perfect.
Then i thought i didn't need the OEM unlocking and the usb debugging anymore so i disabled both. Then afterwards i rebooted my phone( Because i had just installed Magisk so i could play pokemon go on a jailbroken device and it required a reboot.).
As it restarted, I got this message on a light blue screen( i don't think it even booted), "Security Error: This phone has been flashed with unauthorised software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I think this is because of disabling the OEM unlocking. I tried flashing a stock ROM(it was really small though, but am downloading a 1.5Gb one right now) using odin while in download mode( The phone doesn't have a recovery menu to wipe/factory reset. It goes straight to download mode) and it appears that the custom binary (boot.img) is being blocked by the FRP lock.
Here is what appears when i go into recovery(well download mode):
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G532F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0x1 (0x302)
MTK SECURE BOOT: ENABLE
AP SWREV: B1 K0 S0
SECURE DOWNLOAD: ENABLE
I can't use ADB because it doesn't even appear if i try "adb devices" it is completely blank. But in odin it shows 0:[COM4]. Is this because my usb debugging is disabled? Can i flash with odin if usb debugging is disabled? If not, is there a way to enable usb debugging with the phone only in download mode( As in no ADB recovery or updating from sd card etc).
Please help. I really need to fix this. Even if i lose everything on the phone it's fine since i only got it yesterday.
Click to expand...
Click to collapse
Greetings and welcome to assist. FRP lock shouldn't prevent you flashing stock rom, the easiest way to restore your device should be with kies/smart switch and using the emergency firmware recovery option
Regards
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. FRP lock shouldn't prevent you flashing stock rom, the easiest way to restore your device should be with kies/smart switch and using the emergency firmware recovery option
Regards
Sawdoctor
Click to expand...
Click to collapse
Ok thanks... Neither worked but i managed to flash the stock rom i got from sammobile.com using odin and it was able to boot and the security error was gone
nullbyte001 said:
Ok thanks... Neither worked but i managed to flash the stock rom i got from sammobile.com using odin and it was able to boot and the security error was gone
Click to expand...
Click to collapse
Thats great news, I'll close this one up then
Sawdoctor
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
YaQub420 said:
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
Click to expand...
Click to collapse
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
shiko2007 said:
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
Click to expand...
Click to collapse
I tried and nothing works
Have you tried it on another pc/laptop? Also does the phone charge okay?
YaQub420 said:
I tried and nothing works
Click to expand...
Click to collapse
ok bro , try clean your micro usb socket by using a can of compressed air and wait 1 min before connect any cable , after clean you can try this way may be help you :
-when you enter to download mode screen that have two option (vol.down to restart & vol.up to continue) connect your phone first and after that hold vol.up ) and see if odin added your device or not .
-if also not work with you try reboot device while you connected phone and enter to download mode
i suggest to remove any old driver of Samsung and install the latest driver that you can download from this link:
http://samsungusbdriver.com/wp-content/uploads/Samsung-Usb-Driver-v1.5.63.0.zip
also try odin version 3.11.1 that recommend for marshmallow firmware
Hi Every One!!!
It looks like many other issues, but the problem is My phone stucks at Samsung logo and I am not able to connect to Odin ( installed latest Samsung USB Drivers - didn't worked, Neither connected to Samsung smart Switch). so cant flash anything....giving error at recovery screen: dm-verity verification failed.
Update from ADB, external storage is disabled.....wiped data/ cache, factory reset didn't worked.
Can go to "download mode" and to Android system Recovery but cant connect to pc.......
When its turned of, connect to pc, it starts charging,,, but when on downloading mode, connect to pc, pc does not make a sound like something has been connected to it...or even on removing no sound, nothing.
PLEASE HELP!!
DETAILS:
My Phone: Samsung Galaxy S6 (SM-G920I)
Software Version: Android 5.1.1
The phone gets stuck at the Samsung logo and has to be reset using power + volume down + volume up
- I then try wiping the cache partition (multiple times) – does not solve the problem
- I then try a factory reset/cache partition wipe (multiple times) – does not solve the problem.
My Android System Recovery screen shows at the bottom:
dm verity verification failed
AND
Odin Mode:
- Product Name: SM-G920I
• Current Binary: Custom
• System Status: Custom
• Reactivation Lock: OFF
• Secure Download: Enabled
• KNOX WARRANTY VOID: 1
• RP SWREV: B:3 K:2 S:2
I downloaded “SM-G920I_G920IDVU4FRC3_G920IZTO4FRC1_ZTO_7.0_(by_firmwarefile.com).zip” to flash from Odin, but MY phone is not able to connect to pc, nor with ODIN, NOR with ADB, Nor with Smart switch, nor as simple removable drive…… I think its USB debugging is not turned on as well as I have never connected this device to pc.
From recovery screen,
Apply update from ADB……..show its Disabled
Apply update from external storage…..show its Disabled
Apply update from cache……..deprecated
Reboot to bootloader……..does nothing, system starts to boot normally and stucks at Samsung logo
Took it to mobile shops, they returned saying that they are not able to connect it to pc..
Please advise, what options are available……….very grateful……thanks and regards.
P.S. My phone shows at the back SM-G920P……..while inside at Android system recovery its, “LMY47K.G920IDVU3DOJ6 and on Odin Mode is ; SM-G920I,,,,,,,,,which firmware should I use to flash. Thanks and regards
Imtiaz Shah said:
Hi Every One!!!
It looks like many other issues, but the problem is My phone stucks at Samsung logo and I am not able to connect to Odin ( installed latest Samsung USB Drivers - didn't worked, Neither connected to Samsung smart Switch). so cant flash anything....giving error at recovery screen: dm-verity verification failed.
Update from ADB, external storage is disabled.....wiped data/ cache, factory reset didn't worked.
Can go to "download mode" and to Android system Recovery but cant connect to pc.......
When its turned of, connect to pc, it starts charging,,, but when on downloading mode, connect to pc, pc does not make a sound like something has been connected to it...or even on removing no sound, nothing.
PLEASE HELP!!
DETAILS:
My Phone: Samsung Galaxy S6 (SM-G920I)
Software Version: Android 5.1.1
The phone gets stuck at the Samsung logo and has to be reset using power + volume down + volume up
- I then try wiping the cache partition (multiple times) – does not solve the problem
- I then try a factory reset/cache partition wipe (multiple times) – does not solve the problem.
My Android System Recovery screen shows at the bottom:
dm verity verification failed
AND
Odin Mode:
- Product Name: SM-G920I
• Current Binary: Custom
• System Status: Custom
• Reactivation Lock: OFF
• Secure Download: Enabled
• KNOX WARRANTY VOID: 1
• RP SWREV: B:3 K:2 S:2
I downloaded “SM-G920I_G920IDVU4FRC3_G920IZTO4FRC1_ZTO_7.0_(by_firmwarefile.com).zip” to flash from Odin, but MY phone is not able to connect to pc, nor with ODIN, NOR with ADB, Nor with Smart switch, nor as simple removable drive…… I think its USB debugging is not turned on as well as I have never connected this device to pc.
From recovery screen,
Apply update from ADB……..show its Disabled
Apply update from external storage…..show its Disabled
Apply update from cache……..deprecated
Reboot to bootloader……..does nothing, system starts to boot normally and stucks at Samsung logo
Took it to mobile shops, they returned saying that they are not able to connect it to pc..
Please advise, what options are available……….very grateful……thanks and regards.
P.S. My phone shows at the back SM-G920P……..while inside at Android system recovery its, “LMY47K.G920IDVU3DOJ6 and on Odin Mode is ; SM-G920I,,,,,,,,,which firmware should I use to flash. Thanks and regards
Click to expand...
Click to collapse
Seems you flashed an unsigned system image or similar to trigger dm-verity like that. Your best option would be to try to set the device in EDL (Qualcomm HS-USB 9008) mode and reflash from there (assuming you already know how to do so) there is a good amount of info on Google and XDA to guide you through. The S6 should have a programmer file to flash as your SBL to reflash the stock firmware
---------- Post added at 03:38 AM ---------- Previous post was at 03:36 AM ----------
If you need to create the rawprogram0 and patch0 files I have custom tools I can share to help you create that as well as your firmware to flash. You will need a programmer though and it can be a difficult process for a user who is beginner with it
@Imtiaz Shah
The 1st thing of all things an Android phone owner should do is turn USB Debugging on: then life becomes easier.
So by means of ADB you can manage Android kernel's dm-verity feature
To disable
Code:
adb devices
adb disable-verity
To enable
Code:
adb devices
adb enable-verity
Is working fine on userdebug builds.
jwoegerbauer said:
@Imtiaz Shah
The 1st thing of all things an Android phone owner should do is turn USB Debugging on: then life becomes easier.
So by means of ADB you can manage Android kernel's dm-verity feature
To disable
To enable
Is working fine on userdebug builds.
Click to expand...
Click to collapse
I think in his case he is on a production build which disables this feature. At least as far as I can see
And yes that's the first thing you should do I do agree
Yes Bro. I missed the trick . But this time I think I am really stuck as I was not wise enough to enable USB debugging in advance. I've been trying to connect the phone with multiple laptops, after installing Samsung USB drivers, but the Laptops are not even making a single sound that something has been connected. Nor showing unknown device, I mean just nothing. I am having a hard time to connect my phone with the laptop. even the guys sitiing at the mobile shop returned the phone after two days by saying that they are not able to connect the phone with the PC.
So, at the moment, on the Android System Recovery Screen, there is a error "dm-verity Verified Failed" and when I try "Apply update from ADB" system says "Disabled",,, "Apply update from external source" system says "Disabled",,,,,,"Apply update from cache",,system says,, "deprecated", when I try "Reboot to boot loader",,,nothing happens and phone starts normally and stuck at logo AND I am not able to connect my device with the phone (which seems to be the main problem). Is it something that my phone has gone into some kind of security lock ??? I am able to access the recovery mode as well as download load mode in the phone but nothing happens afterwards..
I have instaled QDLoader HS-USB Drivers and tried connecting my device through Qcom_EMCP_Multi-Port_Software but result invain....
TheExploitedOne said:
Seems you flashed an unsigned system image or similar to trigger dm-verity like that. Your best option would be to try to set the device in EDL (Qualcomm HS-USB 9008) mode and reflash from there (assuming you already know how to do so) there is a good amount of info on Google and XDA to guide you through. The S6 should have a programmer file to flash as your SBL to reflash the stock firmware
---------- Post added at 03:38 AM ---------- Previous post was at 03:36 AM ----------
If you need to create the rawprogram0 and patch0 files I have custom tools I can share to help you create that as well as your firmware to flash. You will need a programmer though and it can be a difficult process for a user who is beginner with it
Click to expand...
Click to collapse
Thanks a million Bro!!
I am a Noob and have no idea about " the rawprogram0 and patch0 files ". I am certainly looking for a soultion to solve my issue but have no idea how much I can bother you on this...... but in either I am really thankful for your sincere offer and really grateful to you. My Heartiest Regards ...
This includes links to the tools you will need and a link to create the proper files. I don't take any credit for these what so ever
The S6 download the lastest firmware and ensure you have the GPT file (it will have a specific name) to use because it will be needed
I'm always available to help
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
jwoegerbauer said:
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
Click to expand...
Click to collapse
and if its not? does that mean i should just throw out the thing?
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
First of all I want to ask you is did you root it or tried to do anything with stock firmware ???
astralc said:
does that mean i should just throw out the thing?
Click to expand...
Click to collapse
I'm afraid, but it seems that you'll have to do it
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
Did you install Samsung USB Drivers from the official website?
I suggest you to use a USB port directly on the motherboard.
Restart your pc after the USB driver is installed.
Goodluck flashing the stock firmware, I believe you should be able to revive easily .