Related
Gentlemen,
Please I updated my note 10.1 2012 GT-N8000 to kitkat 4.4.2 without rooting or usb debugging enable, then during charging it, i forget it around four hours it restarted, and all the time in download mode, i used odin, failed to open Com port, i tried to enter to recovery, failed. i tried to enter to bootloader, i thing it is locked, also when i tried to use odin, it tells that no PIT is found, any suggestion? (changed usb cable, uninstall kies and install usb samsung drivers, used different versions of odin with CSC,Bootloader, PIT ,PDA,modem, files etc... ) all are failing, seems that it is just locking itself... the only place i can enter, is when i enter press power button, and - volume (Volume downn), it would take me to ODIN MODE , Product name: GT-N8000, Currnet Binary: Custom, System Status: Official, RP SWREV: A2 and it is all the time Downloading Do not turn off target, even i tried to uninstall the battery for sometime, and i put it again... and if just insert it to the usb it would start directly to Firmware upgrade encountered an issue, please select recovery mode (which i can't enter to it, failed to enter by power + volume up) in kies & try again, also the initialization of kies is not supported, if used...
What are you trying to flash with Odin? Try official
And if the device actually pops up in Odin and the COM port is through then the cable and the hardware is all fine.
raedzahr said:
Gentlemen,
Please I updated my note 10.1 2012 GT-N8000 to kitkat 4.4.2 without rooting or usb debugging enable, then during charging it, i forget it around four hours it restarted, and all the time in download mode, i used odin, failed to open Com port, i tried to enter to recovery, failed. i tried to enter to bootloader, i thing it is locked, also when i tried to use odin, it tells that no PIT is found, any suggestion? (changed usb cable, uninstall kies and install usb samsung drivers, used different versions of odin with CSC,Bootloader, PIT ,PDA,modem, files etc... ) all are failing, seems that it is just locking itself... the only place i can enter, is when i enter press power button, and - volume (Volume downn), it would take me to ODIN MODE , Product name: GT-N8000, Currnet Binary: Custom, System Status: Official, RP SWREV: A2 and it is all the time Downloading Do not turn off target, even i tried to uninstall the battery for sometime, and i put it again... and if just insert it to the usb it would start directly to Firmware upgrade encountered an issue, please select recovery mode (which i can't enter to it, failed to enter by power + volume up) in kies & try again, also the initialization of kies is not supported, if used...
Click to expand...
Click to collapse
Download a N8000 firmware which comes packed in zip
extract it and then select it with AP in odin,
flash and wait until you're done
and if it is struggling with the port try another one
Download the official firmware for your model number regardless of the region (that is if you're ok with it otherwise use your own region's)
Then use the appropriate Odin version to flash the firmware to your device while in download mode. Put the Firmware file into PDA/AP.
Make sure Reartition is not ticked otherwise your device will be bricked. (Lol it rhymes)
Make sure the cable connection is stable and don't disconnect the connection until the process of flashing is done.
Not advertising but you can find your firmware at Sammobile. It tells you which Odin version to use too. I'm not sure if Odin version matters but let's play safe.
Hope this helps.
Sent from my SM-A300F using XDA Free mobile app
bernardwu said:
Download the official firmware for your model number regardless of the region (that is if you're ok with it otherwise use your own region's)
Then use the appropriate Odin version to flash the firmware to your device while in download mode. Put the Firmware file into PDA/AP.
Make sure Reartition is not ticked otherwise your device will be bricked. (Lol it rhymes)
Make sure the cable connection is stable and don't disconnect the connection until the process of flashing is done.
Not advertising but you can find your firmware at Sammobile. It tells you which Odin version to use too. I'm not sure if Odin version matters but let's play safe.
Hope this helps.
Sent from my SM-A300F using XDA Free mobile app
Click to expand...
Click to collapse
My phone was on a 4.4.2 custom rom when the same incident as the op happened. Where can I find the official firmware for 4.4.2?
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Use the latest version of Odin
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try diffrent USB ports on the computer and diffrent signal cords
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
Did you enable usb debugging? Oh my bad, scratch that, try connecting your phone to your pc b4 you open Odin (using the latest Odin and run as admin)
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
hi! i have the same problem , did you find a solution please? thanks
That secure download enable thing is normal mine has the same thing. Your phone is not connecting for whatever other reason
Try flashing exact stock firmware with odin.
SMG920I
POWERED BY INSUFFICIENT RAM
TUNED BY TEAM PINGPONG
DRIVEN BY KFORKAI
darksimo said:
hi! i have the same problem , did you find a solution please? thanks
Click to expand...
Click to collapse
Yeah i got it flashed. Turned out that i used an old odin also you have to get a firmware which has the same csc or one that it compatible with your device. Info on samsung csc can be found on the net, look for multi csc codes if you wanna change to software from another carrier.
Sent from my VS980 4G using XDA Free mobile app
Before you start flashing always disable reactivation lock. Othervise flashing may fail.
ODIN won't detect Galaxy S5 G906K [KT]
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Resolved.
nano-dev said:
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Click to expand...
Click to collapse
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
kingroot not working!
nano-dev said:
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
Click to expand...
Click to collapse
.................................................................................................................................................................................................
kingroot was working when they released V.4.5.0 but now not working anymore :crying:
sorry for my bad English
kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try using box tools like z3x to see if problem would be solved
Update: i fix it by unmouting checking and mounting back the phone...weird a part or idk had to be not well attached.
Hello
I was trying to root Samsung galaxy grand prime G530H. But it has stucked in 'downloading...'
Secure Download : Enable in blue
Why can't I unlock the bootloader on FZ? There is just no such option in Dev Mode.
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Feyaad said:
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Click to expand...
Click to collapse
You could always try the S7 edge specific forums.
Not being sarcastic
root the chines root
i have sm-n9006 i cant root my phone
also have the secure download enadled in blue
any help ??
my phone is a chinses version ... which doesnt have the play store
Hello
Do you have your bootloader blocked, the new version of firmware enabled this option, you need to go to development options and enable the option of OEM, and that's it, you can flash whatever you want
I recently rooted my j7 with cf one click. Then I realized I needed Twrp because it didn't come with the package. successfully flashed twrp with odin via pc. successful root. everything fine till I tried to flash the enigma rom note experience? phone was stuck in a boot loop. got the loop to stop by accessing twrp. now I'm able to access both download mode and twrp. when I just turn the phone on though it shows the battery charging icon and in the top corner says in red odin mode then in white product name:sm-j700p
current bianary:custom
system status:custom
fap lock: off
Knox warranty void; 0x1 (4)
qualcomm secure boot: enable (csb)
ap swrev: s1, t1, h1, r1, a 1, p1
secure download : enable
before the flash attempts I had developer options on as well as debugging. I also had the bootloader set to oem.
just a min ago I tried to flash a stock optimized rom and got error7. I have tried downloading stock roms. but they weren't zips I cant get anything to work. I have odin on my laptop. my phone isn't recognized by the computer. so I'm having to down load zips to my SD on my s7 edge and transfer the card to the j7.
I'm sure this is a simple thing I'm Messing up.
if the question has been asked I apologize.
I have worked for two days on this and can not get it together. please help
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
YaQub420 said:
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
Click to expand...
Click to collapse
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
shiko2007 said:
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
Click to expand...
Click to collapse
I tried and nothing works
Have you tried it on another pc/laptop? Also does the phone charge okay?
YaQub420 said:
I tried and nothing works
Click to expand...
Click to collapse
ok bro , try clean your micro usb socket by using a can of compressed air and wait 1 min before connect any cable , after clean you can try this way may be help you :
-when you enter to download mode screen that have two option (vol.down to restart & vol.up to continue) connect your phone first and after that hold vol.up ) and see if odin added your device or not .
-if also not work with you try reboot device while you connected phone and enter to download mode
i suggest to remove any old driver of Samsung and install the latest driver that you can download from this link:
http://samsungusbdriver.com/wp-content/uploads/Samsung-Usb-Driver-v1.5.63.0.zip
also try odin version 3.11.1 that recommend for marshmallow firmware
I have a bricked S8+ stuck on samsumg logo (labeled as SM-G9550 on backside label), but when i boot into download mode, it shows "PRODUCT NAME: SM-G955N", How this could possible, when i check the imei on the web, it result SM-G9550 as product name
flashing "N" firmware with odin result PASS, but still stuck on logo..
i can't flash 9550 firmware as it shows error "Secure Check Fail: PIT"
FYI, when i go to recovery mode, the screen goes to "Kernel Panic Upload Mode"
please help if anyone here has information about it
ryantprawira said:
I have a bricked S8+ stuck on samsumg logo (labeled as SM-G9550 on backside label), but when i boot into download mode, it shows "PRODUCT NAME: SM-G955N", How this could possible, when i check the imei on the web, it result SM-G9550 as product name
flashing "N" firmware with odin result PASS, but still stuck on logo..
i can't flash 9550 firmware as it shows error "Secure Check Fail: PIT"
FYI, when i go to recovery mode, the screen goes to "Kernel Panic Upload Mode"
please help if anyone here has information about it
Click to expand...
Click to collapse
Try doing the carrier switch method first then downloading and installing the unlocked firmware afterwards via odin. Make sure you download the 955U1 Odin firmware and NOT the 950U. Also can you upload a screenshot of what it shows in download mode
creglenn said:
Try doing the carrier switch method first then downloading and installing the unlocked firmware afterwards via odin. Make sure you download the 955U1 Odin firmware and NOT the 950U. Also can you upload a screenshot of what it shows in download mode
Click to expand...
Click to collapse
Thanks for your reply, so far the device only accept 955N firmware only, but nothing happen after falshing , why you suggest to download 955U1? will it work?
do you mind to give me a link how to do the carrier switch? I will search it on inet while u replying this post
ht**s://ibb.co/jitLV7
ht**s://ibb.co/jWjiiS
ryantprawira said:
Thanks for your reply, so far the device only accept 955N firmware only, but nothing happen after falshing , why you suggest to download 955U1? will it work?
do you mind to give me a link how to do the carrier switch? I will search it on inet while u replying this post
ht**s://ibb.co/jitLV7
ht**s://ibb.co/jWjiiS
Click to expand...
Click to collapse
You have the Korean model not sure why it has a 950 on the back. But you need to use the 955F firmware. Flash that thru odin
creglenn said:
You have the Korean model not sure why it has a 950 on the back. But you need to use the 955F firmware. Flash that thru odin
Click to expand...
Click to collapse
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
ryantprawira said:
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
Click to expand...
Click to collapse
Are you using the new Odin 3.13.1, if you are or not try removing the Samsung USB drivers and then restarting the computer. Then re-download the USB drivers and firmware.
ryantprawira said:
i tried, but blocked becouse of pit.. errors occur "SECURE CHECK FAIL: (PIT)"
Click to expand...
Click to collapse
I had the same issues flashing my 8+ . . . pit issues.
I found that a different USB cable worked, and also:
Go to download mode, start odin, load TWRP or other file, press start and then press pwn dwn, bixby and power, Odin will fail, but........
because you you went back into download mode, Odin will succeed next time you flash.
For some reason if I just acknowledged that Odin was going to fail on the first attempt, I kept the phone connected and did the routine, and on the second flash attempt, no more Pit file errors for me.
creglenn said:
Are you using the new Odin 3.13.1, if you are or not try removing the Samsung USB drivers and then restarting the computer. Then re-download the USB drivers and firmware.
Click to expand...
Click to collapse
I'm using odin 3.12, sounds promising, i will give it a try, thanks for the tips..
JeffDC said:
I had the same issues flashing my 8+ . . . pit issues.
I found that a different USB cable worked, and also:
Go to download mode, start odin, load TWRP or other file, press start and then press pwn dwn, bixby and power, Odin will fail, but........
because you you went back into download mode, Odin will succeed next time you flash.
For some reason if I just acknowledged that Odin was going to fail on the first attempt, I kept the phone connected and did the routine, and on the second flash attempt, no more Pit file errors for me.
Click to expand...
Click to collapse
i have try this combination but still failed, i guess the flash are blocked because FRP lock is "ON", since i can't go into the system or recovery mode, i have no idea how to turn off the FRP lock...
if you guys have a tricks how to turn off the frp lock via download mode, i think the flash should work without any doubt..