Code:
ODIN MODE
...
PRODUCT NAME is J7ELTE
FRP LOCK is OFF
...
WARRANTY VOID = 1 (0x0500)
RP SWREV are B=3; K=0; S=1
...
Warrant void is YES; bricks have been 3 times; Rescues under Kies have been NEVER
PS: Actual bricks have been 10+ times while upgrading fw of MM under Heimdall thru my Mac
The question is: what are revision S and 0x0500 stood for? And why bricking causes ANY PC not recognizing my phone under MTP?
Finally what are FRP and RP thanks?
Related
I tried to root my S6 using a method posted on here. However something messed up and my phone is i guess (soft bricked)
I have tried MANY different step by step guides with no help at all.
My phone either sits on the "Use smart switch for emergency recovery" or i can get into the ODIN mode, but that's it.
I downloaded the correct firmeware G920PVPU3CPB6_G920PSPT3CPB6_G920PVPU3CPB6_HOME.tar
Opened Odin 3.10.7
Clicked AP
Loaded the PB6
And everytime i attempt to get this to stock it stops at Pit Mapping and fails.
I have changed ports, USB cables, Redownloaded all the USB drivers etc and still can't get my phone to do anything.
Just now, I tried opening the One CLick Root, (just to see) and it doesn't even pick up my phone in Debug Mode, *saying its not in usb debugging* which i know100% i put it in that when i first started or tried to root.
Anyhow
ALL I am needing to do is get my phone back to working order, idc if it's back to stock or not. As long as it works. But i have tried everything i could find, and have had no luck at all.
Some one PLEASE walk me through what i need to do.
RECAP:
Downloaded Odin 3.10.7
Downloaded stock firmware
Gets stuck at Get Pit Mapping then FAILS
From the Odin Screen this is what is listed
Product: SM-G920P
Current Binary: Custom
System Stats: Official
FRP LOCK : OFF
Secure Download : Enabled
KNOX Warranty Void : 0 (0x0000)
RP SWREV: B: 3 K:2 S:2
If anyone can please help get this back in working order i'd be SUPER appreciative.
ALSO: I've tried connecting to Smart Switch to do the Emergency Recovery, but it keeps telling me my SN is incorrect. Dunno why i got it right off the box,lol
ALSO: KIES3 says it isnt a reconized device aswell....
Re-Partition in Odin is OFF right?
DavideRodeo said:
Re-Partition in Odin is OFF right?
Click to expand...
Click to collapse
Correct
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
YaQub420 said:
Hello guys.
This is a failed update by TWRP my S6 computer does not detect / see the phone at all. So I can not upload the original system. I've tried all the possible ways. I ran drivers from different sources, tried to restore the system through the Smart Switch but every time the computer does not respond to the phone hook. I will add that I did not change the roms more than once and never managed to pull the phone in this way. Enables only in Download mode. On the top left I have the following messages:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRECT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID 1 (0x0301)
RP SWREV B:4 K:2 S:2
Sorry for my bad english but i am writing google translator.
Click to expand...
Click to collapse
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
shiko2007 said:
ok bro, did you try remove driver of Samsung and reinstalling it. also try change cable may be there's fault on it
Click to expand...
Click to collapse
I tried and nothing works
Have you tried it on another pc/laptop? Also does the phone charge okay?
YaQub420 said:
I tried and nothing works
Click to expand...
Click to collapse
ok bro , try clean your micro usb socket by using a can of compressed air and wait 1 min before connect any cable , after clean you can try this way may be help you :
-when you enter to download mode screen that have two option (vol.down to restart & vol.up to continue) connect your phone first and after that hold vol.up ) and see if odin added your device or not .
-if also not work with you try reboot device while you connected phone and enter to download mode
i suggest to remove any old driver of Samsung and install the latest driver that you can download from this link:
http://samsungusbdriver.com/wp-content/uploads/Samsung-Usb-Driver-v1.5.63.0.zip
also try odin version 3.11.1 that recommend for marshmallow firmware
Hi friends,
Please help to unbrick my phone after unsuccessful flashing to root. I used Odin3-v3.10.6 and CF-Auto-Root-zeroflte-zerofltexx-smg920f.far.
I started downloading mode, connect phone with PC, Windows found new device and installed it. After start Odin, open tar file. Odin found device in COM port. Start flashing.Odin fill half 1st block and stop with error "no connection". Phone freeze with screen:
Odin mode
Product name: sm-g920f
Current binary: Samsung official
System status: official
Reactivation lock: on
Secure download: enabled
Knox warranty void: 0 (0x0000)
RP SWREV: B:5 K:2 S:2
Custom binary(RECOVERY) blocked by R/L
Phone do net respond anymore to button pressing or long pressing screen remains the same and on.
Please help!
avk4avk
Sent from my iPad using Tapatalk
I just left it to drain battery and after recharge phone started normally
Sent from my iPad using Tapatalk
I tried installing xposedinstaller a month ago, when trying to update it my phone got stuck in a bootloop. Only menu i can acces is ODIN by pressing Volume down, lock and home button. How do i flash a rom from a mac? It doesn't even see my phone when i plug it it. I tried everything for the past 5 hours and nothing works.
Odin Mode
Product Name : SM-G920F
Current Binary : Custom
System Status : Custom
Reactivation Lock : Lock
Secure Download : Enabled
Knox Warranty Void : 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Kirito619 said:
I tried installing xposedinstaller a month ago, when trying to update it my phone got stuck in a bootloop. Only menu i can acces is ODIN by pressing Volume down, lock and home button. How do i flash a rom from a mac? It doesn't even see my phone when i plug it it. I tried everything for the past 5 hours and nothing works.
Odin Mode
Product Name : SM-G920F
Current Binary : Custom
System Status : Custom
Reactivation Lock : Lock
Secure Download : Enabled
Knox Warranty Void : 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Click to expand...
Click to collapse
Use Heimdall For Mac
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
jwoegerbauer said:
My guess it's not a hardware problem, but a software problem, otherwise even ODIN wouldn't work in any way.
If phone stupidly boots into download ( fastboot ) mode this means phone's bootloader is directed to do so. To fix this the appropriate property has to be reset. This only progammatically can be done by you if phone's Android got rooted and USB-debugging got enabled, too.
Click to expand...
Click to collapse
and if its not? does that mean i should just throw out the thing?
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
First of all I want to ask you is did you root it or tried to do anything with stock firmware ???
astralc said:
does that mean i should just throw out the thing?
Click to expand...
Click to collapse
I'm afraid, but it seems that you'll have to do it
astralc said:
I'm no tech whiz, my thing is more writing.
I don't know how, but my samsung galaxy emerge got bricked. Soft bricked. I can get it into download mode but it wont be recognized by my pc. Ive tried each port, uninstalled and reinstalled odin, looked in the drives, tried a new cord (or two) and put the phone in different modes. I cant get it into recovery mode, only download mode and an error screen that says:
'Custom binary blocked by FAP lock (recovery.img)
secure fail: recovery
once again, i never installed a custom binary or anything like that.
going to the download screen gives me this message:
'odin mode (high speed)
download mode !!
product name: sm- j327p
current binary: custom
system status: custom
fap lock: on
warranty void: 0x1 (0x30c)
qualcom secureboot: enable (csb)
ap swaev: s1 t1 a3 p1
ap swaev: k 0 s 2
secure download: enable'
please help. again, i dont think it's a pc connection problem, i think its a phone problem. so how do fix it?
Click to expand...
Click to collapse
Did you install Samsung USB Drivers from the official website?
I suggest you to use a USB port directly on the motherboard.
Restart your pc after the USB driver is installed.
Goodluck flashing the stock firmware, I believe you should be able to revive easily .