I have a Touch Diamond , it works ok, but , when I try to turn on both Wi-fi and bluetooth it does nothing ! Does anybody have the same problem ? Are any solutions to this ?
Welcome to forums
I would try a hard reset.
Instructions in the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Diamond_HardReset
Hope it helped,
I have a slightly different problem, on my diamond, if I press tun on wi-fi, nothing happens, only the rainbow circle shows, and than, the wireless is still off. Change radio, change rom, but the same! Please, help.
:crying:
my wildfire s camera flash is not working......it works only when i start the app after boot.and it only works with torch apps and camcoder mode..it swithed off/on automaticaly during operation..so i guess some cable has loosen...one more thing it never works with camera mode....so i guess i need repairing ..any ideas about costs etc.. thnx
bump
Now ----------------> Couldnt connect to camera
I bought a new Xperia z3 and compact and I tried to connect the z3 on my laptop to transfer files but it can't connect via mtp mode for some reason. I can hear the sound connecting and disconnecting but there was no response to the phone and laptop. Not even a notification on the phone. MSC mode is working fine btw. I tried all such as removing sd and sim, restarting both devices but no luck. I know it is the phone itself is the problem because my Z3 compact is working just fine. I was able to connect the compact to the pc wirelessly via LAN but to be able to do that you need to pair the device via mtp mode. Anyone have the same problem? As I check the phone physically, I think it is one of the first phones with factory defects. I can see that the top back part is not fitted to the glass. You can even see it moving closer if you press it towards each. I don't know if the hardware and software are connected, I hope not. I can't give it back to be replaced because there's no visible defects. Just hoping the next update can fix the main issue.
After plugging the device to pc go to device manager and remove xperia z3. Then scan for new hardware. Then it will download the driver for your device automatically and your device would be visible in PC.
I m doing this every time I connect my z3 with laptop.
Anyone else have any permanent and better solution?
A pop up on my pc says Driver installation failed or something like that.. But thanks to you, you remind me having the same problem with my old Xperia Play. The key is the "usb debugging mode" box should be checked. To do that, go to settings =>about=>build number.. Tap it several times until the developer options will come visible at the settings and there you go. You can now connect via mtp mode. Btw, you can hide the developer options again for some oc reasons by going to apps=>all=>settings then clear the data.
Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Black Rnag said:
Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Click to expand...
Click to collapse
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
thelostlegend said:
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
Click to expand...
Click to collapse
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Black Rnag said:
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Click to expand...
Click to collapse
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
thelostlegend said:
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
Click to expand...
Click to collapse
No, like I said, I did search the menu of D5300 and it's different to P610's menu. That's why I'm so concern about this because my only option is connect the smart device through a typical WiFi network generated by the camera.
I think that the problem is in my phone settings or how to fix it through a static IP addres, not at the camera, but I don't know how to solve it
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Manit Arora said:
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Click to expand...
Click to collapse
Hi. I have to say that with the following OTA of my phone that I received the problem was solved. So, I can't help you.
What can I say to you is that I talked to the Oneplus Support and they were very gentle and after like two months talking trying to explain my problem I managed to make an online appointment where they study my phone. Finally, because of my PC's operating system they couldn't upload some files in my phone to solve the problem. But the analyst I was talking said he would raise my problem to developers, and in fact, they solved the problem in the next update. If you really need this solved, you should try to talk to support, even most in your case, because your device has Oxygen.
I hope my answer helps you. Regards.
Sir, last week I repair my xperia c by sony pc companion
And from that time I am facing problems my xperia c get turned off automatically and I can't turn it on. I always need to plug-in charger to turn it on..
Pls solve this issue.
Thanks