Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Black Rnag said:
Hi,
I recently bought a Nikon Coolpix P610 with built-in WiFi. When I tried to connect my OPO (factory ROM, up-to-date with OTA to 5.1.1 Cyanogen 12.1-YOG4PAS3JL) with the camera WiFi, my cellphone never reach to an IP address.
I have installed the app "Wireless Mobile Utility" from Nikon. I read that the app is compatible with several phone but the OPO isn't on the list so it might not work, but i need it to work.
The camera work just fine because I tried with a Samsung Galaxy S3 mini and it was okey.
I wonder if anyone had the same problem and could fix it or if you can help me to figure it out.
I tried to connect it through an static IP instead DHCP but I failed, I don't know if i'm doing it right.
Thankys in advance
Click to expand...
Click to collapse
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
thelostlegend said:
i had no problems connecting it to my D5300 , which method did you use while connecting , i used WPS and it works flawlessly everytime i flash a new rom , try restating both devices and give it a try
Click to expand...
Click to collapse
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Black Rnag said:
As far as I know, Nikon Cooplix P610 doesn't have the WPS button, and the menu doesn't have the option like in D5300. So, you are forced to connect the smart device trough a tipical WiFi connection, like if the camera was a modem. And it didn't work :s
Click to expand...
Click to collapse
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
thelostlegend said:
You don't need wps button , in 5300 connect using wps is inside WiFi settings ,so maybe your cam has that too
Sent from my OnePlus One
Click to expand...
Click to collapse
No, like I said, I did search the menu of D5300 and it's different to P610's menu. That's why I'm so concern about this because my only option is connect the smart device through a typical WiFi network generated by the camera.
I think that the problem is in my phone settings or how to fix it through a static IP addres, not at the camera, but I don't know how to solve it
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Manit Arora said:
Hi.. I am facing the same problem, not able to connect my one plus 2 with nikon d5300. Have got WMU installed, the phone says connected however camera shows not connected and when i open the app, it also says not connected... Please advise.
Click to expand...
Click to collapse
Hi. I have to say that with the following OTA of my phone that I received the problem was solved. So, I can't help you.
What can I say to you is that I talked to the Oneplus Support and they were very gentle and after like two months talking trying to explain my problem I managed to make an online appointment where they study my phone. Finally, because of my PC's operating system they couldn't upload some files in my phone to solve the problem. But the analyst I was talking said he would raise my problem to developers, and in fact, they solved the problem in the next update. If you really need this solved, you should try to talk to support, even most in your case, because your device has Oxygen.
I hope my answer helps you. Regards.
Related
Hi.
When i connect my touch pro to my laptop my touch pro thinks he is charging. I tried another laptop/cabel/ROM but it doens't matter.
I can't get a connection with my phone.
Any idea's?
Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.
bare242 said:
Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.
Click to expand...
Click to collapse
Hi,
No, i don't get asked and the settings are good.
It's strange, because it is suddenly.
I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...
TechnoHippie said:
I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...
Click to expand...
Click to collapse
Well, i tried 3 different cables. The only thing i changed is the cable in my car. last week i was i Italy and by car charger has gone dead. And i buyed another one. that's all..
Anyone?...
hardreset?
Hard-reset, new ROM, new Radio... nothing helps
Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.
bare242 said:
Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.
Click to expand...
Click to collapse
Deed.. nothing
Maybe you can find some new ideas here.
my phone sometimes just charges without activesync but that's only when i have wifi on 0.o if i turn wifi off then the phone syncs.
No luck... tried everything.
Well,I have similar issue with AS.
It starts suddenly and now I am unable to connect.
When I have enabled "Faster data synchronization",then the green icon keeps rotating for a while,but ends with an errormessage. When I uncheck it,AS absolutely doesn't see TP,no attempt.
My cable is working,because I am synchronizing also a HTC Hurricane(SDA2) without any problems.
I have also tried another PC,no luck,same symptoms.
Mass Storage and Internet sharing is working also perfectly.
Mainly I tought,that the IP connection is firewalled,but when it doesn't work also on another PC,that was working before,I have no more ideas.
I have a 2011 Jeep Grand Chreokee. When I first got the phone, it paired fine and I was able to make and receive calls through the BT. I had this setup for about 1-2 days. I then rooted the phone with the stock ROM only removing bloat ware...now I cannot connect via bluetooth back to the car. It seems to connect then disconnect me right away. Ideas?
I know this seems obvious but have you tried unpairing and repairing the phone to the car? Sometimes bluetooth can get fidgety and most of the time it requires you to repair the device. In my experience that generally solves the issues I have had with bluetooth.
Any time I have factory restored my phone I have had to repair it to any Bluetooth devices it was once connected to. Not sure if the Bluetooth address changes for the phone or not on a reset or ROM change, but it seems to be the case. My Infiniti G37s has Bluetooth and I experienced the same issue as you, pair it again and see if that helps.
Thanks for replies...I tried to repair about 6 different times...same result. It seem that the phone and audio connections both connect for about 2 seconds, then the phone disconnects.
Funny, I wanted to try this but kept forgetting. So I just went down to my garage and tried it, and it paired successfully on the first try. Tried making a call via number/phonebook and it all worked.
I'm rooted running Das BAMF 1.3, and paired it with a '11 Sonata Limited.
So I got it working...but without the phone book downloaded. The issue is in fact when it tries to download the phone book. Need to get another phone loaded up with my contacts and do a sync to get phone book loaded to car.
DieselvRR said:
So I got it working...but without the phone book downloaded. The issue is in fact when it tries to download the phone book. Need to get another phone loaded up with my contacts and do a sync to get phone book loaded to car.
Click to expand...
Click to collapse
Did you do anything to get it working?
When the device asked me to allow connection to download the phone book, I declined, only then would it pair properly.
I think I figured it out, I have the Infiniti G37, when I rooted & re-paired the Bluetooth, somehow I ignored the question when it popped up asking to "allow" or "deny" the connection.
Yesterday during the whole 4G fiasco, I reflashed & had to re do everything this morning, when I paired my BT, it asked me whether to allow & this time I clicked allow & my BT connects & stays connected fine now.
My question is, is there a way to delete the BT pairing on the phone without having to completely wipe the phone with a reflash?
ruddogg said:
I think I figured it out, I have the Infiniti G37, when I rooted & re-paired the Bluetooth, somehow I ignored the question when it popped up asking to "allow" or "deny" the connection.
Yesterday during the whole 4G fiasco, I reflashed & had to re do everything this morning, when I paired my BT, it asked me whether to allow & this time I clicked allow & my BT connects & stays connected fine now.
My question is, is there a way to delete the BT pairing on the phone without having to completely wipe the phone with a reflash?
Click to expand...
Click to collapse
nevermind, I just found the answer
http://support.vzw.com/clc/devices/knowledge_base.html?id=39262
just hold down "paired"
I believe the issue is just with the MyGig radio on the Chrysler products. I have a SRT8 Magnum with the MyGig and allowing it to download the address book "Breaks" the B.T. connection. I don't know what the issue is? Perhaps too much information being sent to the MyGig and it "locks up"?
I also have a Ford Focus for a daily driver and allowing it to download the Address Book over the phone has no such issue.
DieselvRR said:
When the device asked me to allow connection to download the phone book, I declined, only then would it pair properly.
Click to expand...
Click to collapse
It does it on my aftermarket Kenwood double-din unit, too. I've seen it happen on several Ford units too.
usafle said:
I believe the issue is just with the MyGig radio on the Chrysler products. I have a SRT8 Magnum with the MyGig and allowing it to download the address book "Breaks" the B.T. connection. I don't know what the issue is? Perhaps too much information being sent to the MyGig and it "locks up"?
I also have a Ford Focus for a daily driver and allowing it to download the Address Book over the phone has no such issue.
Click to expand...
Click to collapse
I updated my 430N radio with the latest firmware update and phone book downloaded and BT is working without getting disconnected.
Thanks
Thanks for that info. Although I can't do it as I have the "MyGig" retro-fitted into my 07 SRT. So, if I apply the "official update" I will lose GPS time and a bunch of other things.
But, nice to know it works.
DieselvRR said:
I updated my 430N radio with the latest firmware update and phone book downloaded and BT is working without getting disconnected.
Thanks
Click to expand...
Click to collapse
Anyone else having this problem?
Please describe it better, then it will be easier to help you
bucho144 said:
Please describe it better, then it will be easier to help you
Click to expand...
Click to collapse
Well, neither usb or hotspot internet sharing is working. My computer can detect the hotspot, but according to the diagnostics tool it doesn't have a valid IP adress. I used my old phone like this all the time, never had any problem.
Im sorry, Im not a tech-y guy, don't know what else I can tell you..
for allmost 2 weeks i've been using this feature without any problem, PC with 64bit win 10 pro, xz runs on android 6.0.1 39.0.A.250. Try to repair software with xperia companion, install all drivers etc. try it with other devices if it does not work it's probably something wrong with phone. In thetering settings there is a visibility setting set it to visible to other devices ( for wireless connection). via usb did you tried with other usb ports in your pc/laptop? have you installed some programms like hamachi etc. they can sometimes mess up some settings in a pc or a anti-virus/firewall is blocking it.
bucho144 said:
for allmost 2 weeks i've been using this feature without any problem, PC with 64bit win 10 pro, xz runs on android 6.0.1 39.0.A.250. Try to repair software with xperia companion, install all drivers etc. try it with other devices if it does not work it's probably something wrong with phone. In thetering settings there is a visibility setting set it to visible to other devices ( for wireless connection). via usb did you tried with other usb ports in your pc/laptop? have you installed some programms like hamachi etc. they can sometimes mess up some settings in a pc or a anti-virus/firewall is blocking it.
Click to expand...
Click to collapse
Thank you, I will try these things!
magicaccent said:
Thank you, I will try these things!
Click to expand...
Click to collapse
which version of Windows 10 do you install? 1511 or 1607
It won't work for version 1607 (14393) with Sony xperia XZ or X performance.
So, I re-install Windows 10 version 1511. (10586)
Right now im on 1607 14393.447and it works fine.
bucho144 said:
Right now im on 1607 14393.447and it works fine.
Click to expand...
Click to collapse
I tried this morning (11/29), it does work, thanks!
Hello all.
I use Nikon SnapBridge to control my Nikon DSLR.
It connects over Bluetooth from within the app.
It does not add a paired device in android itself.
The problem i have when pairing is after accepting the security keys on the Camera and the S7.
After that the name of the camera dissapears and connection fails from that point.
At first i thought it might be an issue with compatibility because its not one of the most stable apps out there.
But when trying it on my friends stock s7 it worked.
Is there any thing i can do to fix this or am i overseeing something?
mine started doing this after the nougat update, I suspect there is an issue with how nikon creates the connection in snapbridge that no longer works in nougat
yesterday I updated my Note 5 from 6.0.1 to 7.0 and can confirm that the snapbridge app is not longer connecting with the phone. after checking the pairing code on both devices the app stops with pairing failed while the cam D5600 still thinks everything is alright. hope there is an app fix soon.
greets
Timo
It does the same thing on my LG G6. The reviews for SnapBridge are dreadful. I have not been able to make it work at all with a couple of different android devices. And based on reviews online, the app is basically a failure.
Ok same here with galaxy s8. Still no solution?
Nikon snapbridge is fixed. Finally
KhaosDrone said:
Hello all.
I use Nikon SnapBridge to control my Nikon DSLR.
They updated the firm ware to 1.12. This worked and fixed all the issues I was having
Click to expand...
Click to collapse
Bluetooth Issue
KhaosDrone said:
Hello all.
I use Nikon SnapBridge to control my Nikon DSLR.
It connects over Bluetooth from within the app.
It does not add a paired device in android itself.
The problem i have when pairing is after accepting the security keys on the Camera and the S7.
After that the name of the camera dissapears and connection fails from that point.
At first i thought it might be an issue with compatibility because its not one of the most stable apps out there.
But when trying it on my friends stock s7 it worked.
Is there any thing i can do to fix this or am i overseeing something?
Click to expand...
Click to collapse
Hey can you try doing what I did with my problem and see if it works? That is, disabling the Google App. Let me know if it did something.
https://forum.xda-developers.com/galaxy-s7/help/google-app-causing-problems-galaxy-s7-t3632503
Hey guys,
I know this thread was originally focusing on issues with snapbridge and Bluetooth, but I am wondering if anyone knows if Snapbridge doesn't support wifi on Android Nougat? Phone is Note 8.
I can't get my camera to connect over wifi at all. Every time I try to connect Nikon D5600 to wifi I get "this option is not available at current settings or in cameras current state." I tried updated camera to firmware 1.02 because it said it had some Android fixes but so far I still get that same error.
Thanks in advance.
I just bought a d850 and at first attempt to connect snapbridge, phone, and camera, it worked on my s7 however after 20 min it completely dropped the wifi not the Bluetooth. I pain stakenly tried to reconnect wifi but was unsuccessful. At this point it was time for an upgrade so I got the S9+ and the app did the same exact thing, no wifi, only Bluetooth. The odd thing is that it works on my Asus tablet and worked at first connection on the s7. I am left baffled and would like to enjoy full res and remote control with phone to my d850. Does anyone have any suggestions on what to do?
Hi guys, tried to use android auto today for the first time and having absolutely no luck. Either with wireless or a cable. Car says device not recognized. I've rebooted both, deleted all devices off the cars system etc and still nothing. The phone connectsvia Bluetooth and takes calls and plays music no issue but android auto won't connect. When I plug the phone in via USB it says device not supported?
I've Googled and it seems this is a common issue. Does anyone know of a fix or having similar issues? I'm rooted so wondering is that the issue or could there be a workaround as I'm rooted instead perhaps. All suggestions welcome, thanks!
Bxperiaz3 said:
tried to use android auto today for the first time and having absolutely no luck
Click to expand...
Click to collapse
I was able to connect using these actions:
Developer settings - wireless Android Auto