Hi to all!
So far I enjoyed my G6-L11 (unlocked bootloader) with TWRP recovery and firmware B118, rooted, debloated..
I noticed that for some reason i had 2 TWRP recoveries!
Ver. 2.8.1.0, that i had flash with G6Sknife utility (option 5) and TWRP 3.0.2 -r5 that i flash manually, again with G6Sknife flashing tool (option 16 then select recovery img).
I thought that by restoring (from inside Twrp recovery) boot, bootloader and recovery image from a previous TWRP BACKUP (...B118), i would solve the issue but... when i've done and hit "reboot to recovery" (from TWRP), phone switch off and never came back!
What i've tried so far:
Enter to recovery (Vol up + Power) ----> nothing happened
Switch on with vol down + power ----> nothing happened
Connect mobile with PC ----> nothing happened
Connect mobile to charger ----> nothing happened
Dissasemble mobile (!), disconnect battery(!) , connect again battery, try to power ON ----> nothing happened
Utility G6Sknife does no longer detect phone either..
My G6 is completely dead!
PLEASE HELP!!!!!
Related
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
perimano said:
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
Click to expand...
Click to collapse
LOL found your post just coz i wanna get 1 of them
there might be more than one recovery partition i guess so command in bootloader says to flash secure recovery when key combo pressed
does cwm stay if you boot using key combo or you have to flash again ?
i'm guessing
1 boot into cwm
2 do a full backup
3 reboot phone check in file manager backup is on external sd !!! IMPORTANT !!!
4 power off the phone
5 try other key combinations ie :
Code:
VOL- and POWER
VOL+ and VOL- and POWER
VOL+ and HOME and POWER
VOL- and HOME and POWER
HOME and POWER
you get the drift
THIS WILL 99.9% FACTORY RESET YOUR PHONE (UNLESS YOU AVOID HARD RESET COMBO)
GOODLUCK
BTW HOW IS THIS PHONE IN HAND ?>
I have a zlr f9006 and I also flashed CWM. I also can't access it via key combination but CWM Rom Manager application gives you the option to "Reboot into Recovery" which actually works!
solution
How to boot this recovery:
- Power off
- Hold VOL+ and Power (will take longer time than VOL- and Power)
- Menu shows giving you choice between ROM downloader, UART, Recovery and Normal
- Use VOL keys to choose Recovery
- CWM boots
Hi,
My p500 phone is just showing LG logo on power up and gets blank after few seconds. I tried all combination volume, power, home keys.
It's not even getting detected by PC. Actually its not reaching to boot loader and stuck before that.
To achieve this situation what I did :
1. I wanted to flash new 4.4.2 ver 12 with this thread.
2. I wiped all data, cache , etc.
3. I tried to update CWM Recovery v6.0.4.8 http://forum.xda-developers.com/showthread.php?t=2564767 from v6.0.4.6.
4. During the installation I pulled out battery by mistake.
5. I rebooted the phone and it got stuck to blank screen after on LG logo screen.
Please suggest something.
I know phone doesn't have any data, rom and CWM recovery (corrupted) and not even boot leader.
Also adb is not able to detect as it's not booting till PC can detect a device.
I am sure it's not hard bricked
Please help , how can at least boot so that adb can detect.
Thanks,
Devesh
Solved
That's how it worked :
1. I pressed a magical combination (dont remember ) :
a. Up volume + back key + power key while inserting battery
or
b. Up down+ back key + power key while inserting battery
which game emergency mode. And that was enough for me.
2.Then, I used standard method to flash recovery and image see here
3. I flashed finally cwm v6.0.4.8 with kitkat 4.4.2.
and it worked
So, I'm trying to flash TWRP through ODIN and it states that everything is working, however, when I boot into recovery mode I still get the stock recovery (Android Recovery 3e) .
ANy ideas?
BrunoSG05 said:
So, I'm trying to flash TWRP through ODIN and it states that everything is working, however, when I boot into recovery mode I still get the stock recovery (Android Recovery 3e) .
ANy ideas?
Click to expand...
Click to collapse
I have exactly the same problem. I would be so thankful, if anyone can help to solve the problem.
Guys, the problem is that our evil little phone restores the factory recovery upon reboot. So when you flash the custom recovery (TWRP or CWM) with Odin, make sure that you uncheck the "Auto-Reboot" checkbox. After flashing the recovery (make sure Odin displays "PASS") simply disconnect the phone, remove the battery, reinsert the battery and turn on the phone (volume up + home + power) and you will be able to use your custom recovery.
obermotz said:
Guys, the problem is that our evil little phone restores the factory recovery upon reboot. So when you flash the custom recovery (TWRP or CWM) with Odin, make sure that you uncheck the "Auto-Reboot" checkbox. After flashing the recovery (make sure Odin displays "PASS") simply disconnect the phone, remove the battery, reinsert the battery and turn on the phone (volume up + home + power) and you will be able to use your custom recovery.
Click to expand...
Click to collapse
That worked! Thanks a lot.
Hello everyone, I can't install custom recovery, the stock recovery always come back, and again and again and again...
I tried to not tip the "Auto-Reboot" checkbox and after flashing the recovery (make sure Odin displays "PASS") simply disconnect the phone, remove the battery, reinsert the battery and turn on the phone (volume up + home + power) and I boot in stock recovery.
And I tried to flash with odin after do this : "mount system r-w
go to /system
change name recovery-from-boot.p to recovery-from-boot.p.backup
go to etc folder in /system
change name install-recovery.sh to install-recovery.sh.backup
If you don't have recovery-from-boot.p and install-recovery.sh. Try to flash other oficial stock rom without brand.
If you have those files and if you change name recovery-from-boot.p and install-recovery.sh reboot your phone to download mode and flash again recovery. "
No more results
I'm disappointing.
Please help me
Samsung galaxy Ace 3 S7275R
Android 4.2.2
Base band : S7275RXXUAML1
Kernel: 3.4.0-16544536 [email protected] #1 Wed Dec 4 17:31:08 KST 2013
Version number : JDQ39.S7275RXXUAML1
My phone is rooted, I have KingRoot and I tip every time USB debogging.
This is how i unbricked my Lenovo K910 (chinese version with 2 sim cards)
I was acidentally wipe everything,
by everything i mean on dalvik cashe, system, internal storage, data and cashe.
and after that phone was empty and stuck on lenovo logo and blue light, bootloader was locked, recovery and twrp recovery was erased....
If i hit power power for 10 seconds and more, lenovo k910 turns off...again i hit power and lenovo logo is on screen , and blue light, and i cant acess recovery, because it is erased.
Whole one day I tried everything what i find on lenovo forum, xda devolepers...etc, but nothing didnt work for me.
Basically i did it with instruction from firts 3 pages on this theme, but with modified twrp recovery, every time i try with diferent recovery, mostly i was trying with cwm recovery and 2.7 twrp but i was unable to boot into recovery mode.
This is how i did it,
1.Download this:
minimal adb fastboot v1.3.1 http://www.mediafire.com/download/q77gkew59y1kbwk/minimal_adb_fastboot_v1.3.1_setup.rar
modified twrp recovery 2.8.1 i find it on somewhere on xda..i can't remember where http://www.mediafire.com/download/ul6751ndjc05ujl/recovery.rar
download custom rom that you wont to install, i use a baralajbi rom from needrom v13.
2. Install minimal adb fastboot v1.3.1
3.In directory where you install minimal adb fastboot v1.3.1, copy recovery from step 1 and custom rom that you downloaded from step 1.
4. Remove Usb data cable from phone and turn off your Lenovo K910 by pushing power button for 10 and more seconds, untill your screen is dark and without, blue, green , and red lights on.
5.Run minimal adb fastboot v1.3.1 as administrator, and write this fastboot boot recovery.img but dont hit enter.
6.Now push both volume keys (volume up + volume down) and connect the usb cable. After vibration hit enter in cmd.
7.After a few seconds your phone will boot in recovery.You will see 2.8.1 twrp recovery on yor phone, and on computer my is windows 7 it will open 12 gb partition from phone, wait if computer neds to download drivers for phone.
8.If you are erease everything like i did, in that 12 gb partition it will be only twrp folder and nothing else.
Copy rom that you downloaded from step 1 in that 12 gb partition.(not in that twrp folder)
9.In twrp recovery on your phone hit Install, and you will see a lot of folders , i cant rememeber where it was copied my custom rom from step 1.
but it is not so dificult, open every folder on twrp recovery untill you find your rom, chose it, and swipe to install
10.After install complete and reboot your system. You're done
11. dont use " adb sideload " command it will result in error: device not found
12. If you got some problem with windows while download drivers for you phone, you can manually download lenovo usb drivers, you will fin them on almost every custom rom for k910 on needrom.
I only register on this forum, to write this, a lot of things I have read here has helped me, so I have an obligation to help someone else.
I wish you good luck.
Branko
Serbia.
hi
i use this
but when i press enter ro boot in recovery
its say faild device is locked
and could not unlock boot loder becouse device is dead and no adb commands work !!
Hi i own an honor 8 FRD-L09 and it's rooted , so the other day i updated the EMUI from 4.1 to 5.0 and my xposed installer said frame work is not intsllad and then i checked my supper su and it said my phone was not rooted and that this point i was what!!
so tried to boot up to the TWRP recovey and gusses what i cant and frist it showed my the the phone recovey options not the custom TWRP that i installed before. i flased The TWRP Recovey in to my phone and wrote the commoade [adb reboot recovery] so it would boot the TWRP That i just flashed but gets stuck on your devie is booting now for 20 min!!! so i thought and this moment hey what not factory rest your phone and everthing mabye the then i can re root my phone but once agian it got stuck on the same screen as when i tried boot TWRP [ YOUR DEVICE IS BOOTING NOW] So a this point i gave up and i wonder did this happedn to you guys who updated ther honor 8 and can you re root you phone again?
oh P.S when i hold the power and volume down buttom my phone turns on when i hold the power and volume up buttom for tre sec it goes to the honor 8 revory mode not the twrp and its saying download the new version of the recovey and its fails evey time and when hold the power and the volume buttom simultaneously i think it't trying to boot the TWRP recovey but it get's stuck on you deviec is booting now screen.
and soryy for my english the my frist languages
i too faced the same problem. some one please help
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Mine won't boot to TWRP and when I use the EMUI boot screen its saying it can't connect to Huawei erecovery servers. So I can't even wipe the root at this point. Any ideas?
Many Thanks!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Well this worked for me, after a day of googling. the twrp-3.1.1-1-frd.img worked, it may have been following the instructions about "fastboot reboot, while holding the volume up.
hey guys.. having the same issue..
I have DUK-L09C432B183 bootloader unlocked and phone u locked..
I downloaded twrp and side loaded with adb/fastboot
but when I reboot (fastboot reboot) it doesn't enter twrp recovery but emui recovery menu.. any suggestions?
(I tried fastboot reboot whole holding volume down.. didn't work)
ok [EDIT] i could finally get TWRP installed .. i backup everything on external SD
then i flashed MAGISK.zip (v14) and from there phone will show HONOR and jsut now it booted into HUAWEI Erecovery and gives me 2 options "factory data reset "Q or Download latest version and recovery !
any suggestions how i can ROOT it ? should i keep on try with MAGISK or ? thank you guys !
SECOND EDIT
so i did FACTORY data reset.. then i ADB side loaded twrp emmc .. then i installed magisk 13.3 .. rebooted and everythign goodf ! i've twrp and device is rooted !!
all good
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Thank you so much for linking to that image file! I was looking on the internet for days!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Hi,
If I used the official TRWP 3.1.1 first and it didn't work, can I just go ahead and flash the TWRP using the modified twrp.img at the above link to see if that works?