Hi,
I've installed SKY ICS .. THE REAL THING 4.0 following these instructions:
http://forum.xda-developers.com/showthread.php?t=1589977
Using Odin, I've installed the Clockworkmod Touch 5.8.1.3 using this thread: http://forum.xda-developers.com/showthread.php?t=1566613
Now, I'd like to go on recoveery mode.... how is it possible ? Previously when holding the start button, there was an 'reboot using recovery mode' option was there but it is no longer there.
Anybody know how to reboot in recovery mode so I could continue and install the updates ?
Thanks,
Punky.
you just need to restart your phone while holding the vol up and down rockers...this will bring you into recovery (i.e CWM)
if u want download mode (aka odin mode), simply restarting and holding down volume and power will do that as well
Thanks.
I've rebooted hodding volume buttons and it worked......
After that, when I hold the on/off button to reboot, the Recovery option is now available.
Punky.
Hi,
The power button of my transformer is broken :
I can't power on the device, but I can light on/off the screen.
In order to fix it, I've got to send it to the customer service, but before I need to flash it back to stock.
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Here is the thing, I did some searches and I tried :
- via adb
- directly from the terminal emulator
- via some widgets with boot mode selection
None of these work, all these methods make the transformer perform a normal reboot.
I'm rooted, and my rom is one of the first ICS beta Revolver.
I just need to flash it back to stock.
Thx in advance.
Reboot into bootloader without power button
Hi fastreward,
It should be possible to boot into recovery from software; for example, I've seen Megatron Parts (for Megatron ROM) boot into recovery after downloading some Plugin.
ROM Manager has an option to reboot into recovery, have you tried it? I think I used one of the options of ROM Manager to update something in my phone (not the ROm nor in my tablet) because it was part of the process, and I believe it rebooted into recovery.
Hope it helps so you can restore your Transformer to STOCK and send it to service.
fastreward said:
Hi,
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Click to expand...
Click to collapse
Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
If you have CWM recovery, this will boot you into it.
https://play.google.com/store/apps/details?id=com.transformer.recovery&feature=search_result
Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
Click to expand...
Click to collapse
Thanks ! Maybe there is a command to reboot in APX mode ?
If you have CWM recovery, this will boot you into it.
Click to expand...
Click to collapse
I hope there is a way to go back to stock via the recovery
fastreward said:
Thanks ! Maybe there is a command to reboot in APX mode ?
I hope there is a way to go back to stock via the recovery
Click to expand...
Click to collapse
If you have CWM recovery, just download an official firmware from Asus website.
Extract the zip file from within, put it on your sd card (or where ever CWM can see it)
Flash the zip file and once reboot you'll be unroot with stock recovery.
(Wipe data, cache and dalvik cache before flashing)
If you can get the tf to do a normal reboot, just hold down the Volume-Down button as it's doing that, and when the screen pops up it will ask checking-for-rck then press volume up to boot into the recovery image, no power button required. (note you do need it to select in recovery, unless you have touch version)
Alternative hold vol-up while soft rebooting to go into APK (sbkv1 only)
Hey guys. I can't seem to get into Recovery on my XT925 for the life of me.
From power off, I press Power + Vol Up to get the boot selection screen, select "recovery" from the list, and the phone reboots into the OS.
I've flashed both CWM and TWRP recoveries. Different versions of each too. But every time I hit "Recovery" it loads the OS and I can't flash any ROMS.
Another weird thing. When I'm in Fastboot and enter "fastboot reboot-bootloader" it just reboots into Fastboot again.
Can anyone help?
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
bweN diorD said:
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
Click to expand...
Click to collapse
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
pascaljr said:
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
Click to expand...
Click to collapse
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
pascaljr said:
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
Click to expand...
Click to collapse
Sweet! Good to see you got it to work. I'm not sure why, but ROM manager doesn't always seem to work.
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Thanks a lot
mitsus said:
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Click to expand...
Click to collapse
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
aviwdoowks said:
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
Click to expand...
Click to collapse
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
mitsus said:
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
Click to expand...
Click to collapse
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
aviwdoowks said:
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
Click to expand...
Click to collapse
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
mitsus said:
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
Click to expand...
Click to collapse
Hmmm
Well post all the recoverys you used, starting w/ the 1st.
Also where you got them.
Something has borked you.
I tried to flash a custom recovery and TWRP , but both are not working by pressing and holding the keystrokes : vol down + power . How else to reinstall a new rom is not ? Now press the power key phone , the phone back bootloop , just press the power + vol dow button to enter the fastboot mode . such as being solfbrick or hard brick ?
you can only install custom recoveries with an unlocked bootloader.
you can access recovery with keys, like you tried, or adb commands, or if you have root download a reboot manager app (easiest solution)
you can restore an device by downloading the firmware you had.
format your sd, place your firmware like this on your sd:
SD:/dload/update.zip or SD:/HwOUC/update.zip
(update.zip can also be update.app if you have android 4.3)
then just reboot, if nothing happens reboot to recovery and select "install zip from sd"
Huawei g6-u10
kuken_91 said:
I tried to flash a custom recovery and TWRP , but both are not working by pressing and holding the keystrokes : vol down + power . How else to reinstall a new rom is not ? Now press the power key phone , the phone back bootloop , just press the power + vol dow button to enter the fastboot mode . such as being solfbrick or hard brick ?
Click to expand...
Click to collapse
I'm also stuck with the same problem
Hey guys, just flashed a custom recocery to my P8 Lite device,
http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
I have flashed this file using ADB fastboot - fastboot flash recovery folder/image.img
all went well, rebooted and booting into the custom recovery all fine, but when rebooting, and trying to enter recovery again using the POWER BUTTON + VOL UP buttons, it loads the stock recovery. It seems the only way I can get into the custom recovery again is using
adb reboot recovery
Is this normal? Is there a way I can ALWAYS enter the custom recovery using the phone buttons and without the need for a PC?
Thanks
Ok so weird I figured it out, everywhere it says press the POWER + VOL up keys to enter recovery. But for me (and I dont know why) its press the POWER and hold down VOL UP + VOL DOWN keys. Gets me into the KIRIN custom TWRP recovery
I do however have another question, Do I need to flash specific custom recovery images for the phone? Or can I flash any custom TWRP recovery images?
Thanks!