[Q]Reboot into bootloader without power button - Eee Pad Transformer Q&A, Help & Troubleshooting

Hi,
The power button of my transformer is broken :
I can't power on the device, but I can light on/off the screen.
In order to fix it, I've got to send it to the customer service, but before I need to flash it back to stock.
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Here is the thing, I did some searches and I tried :
- via adb
- directly from the terminal emulator
- via some widgets with boot mode selection
None of these work, all these methods make the transformer perform a normal reboot.
I'm rooted, and my rom is one of the first ICS beta Revolver.
I just need to flash it back to stock.
Thx in advance.

Reboot into bootloader without power button
Hi fastreward,
It should be possible to boot into recovery from software; for example, I've seen Megatron Parts (for Megatron ROM) boot into recovery after downloading some Plugin.
ROM Manager has an option to reboot into recovery, have you tried it? I think I used one of the options of ROM Manager to update something in my phone (not the ROm nor in my tablet) because it was part of the process, and I believe it rebooted into recovery.
Hope it helps so you can restore your Transformer to STOCK and send it to service.

fastreward said:
Hi,
To flash it I need to go to bootloader or download mode (I dunno what volume+/power is??)
Click to expand...
Click to collapse
Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
If you have CWM recovery, this will boot you into it.
https://play.google.com/store/apps/details?id=com.transformer.recovery&feature=search_result

Vol up + power button get you into APX mode.
(Good only if you're SBK v1 for NVFLash)
Click to expand...
Click to collapse
Thanks ! Maybe there is a command to reboot in APX mode ?
If you have CWM recovery, this will boot you into it.
Click to expand...
Click to collapse
I hope there is a way to go back to stock via the recovery

fastreward said:
Thanks ! Maybe there is a command to reboot in APX mode ?
I hope there is a way to go back to stock via the recovery
Click to expand...
Click to collapse
If you have CWM recovery, just download an official firmware from Asus website.
Extract the zip file from within, put it on your sd card (or where ever CWM can see it)
Flash the zip file and once reboot you'll be unroot with stock recovery.
(Wipe data, cache and dalvik cache before flashing)

If you can get the tf to do a normal reboot, just hold down the Volume-Down button as it's doing that, and when the screen pops up it will ask checking-for-rck then press volume up to boot into the recovery image, no power button required. (note you do need it to select in recovery, unless you have touch version)
Alternative hold vol-up while soft rebooting to go into APK (sbkv1 only)

Related

Can't access Odin, frozen fastboot

Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Txkw said:
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Click to expand...
Click to collapse
I am also facing the exact same problem. Can someone kindly guide us please?
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
My power button is broken too.
I solved the problem flashing ClockworkMod Touch from Windows Terminal.
DJBhardwaj said:
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
polobunny said:
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
Click to expand...
Click to collapse
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
a2zRulz said:
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
Click to expand...
Click to collapse
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
polobunny said:
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
Click to expand...
Click to collapse
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
a2zRulz said:
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
Click to expand...
Click to collapse
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
polobunny said:
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
Click to expand...
Click to collapse
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
a2zRulz said:
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
Click to expand...
Click to collapse
Ok let's get this right
What is your goal? Flash a different recovery? Then you can flash a recovery from within something such as ROM Manager if your rom still boots.
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
a2zRulz said:
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
Click to expand...
Click to collapse
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
polobunny said:
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
Click to expand...
Click to collapse
You sir, are my hero... Many thanks for this :highfive: :victory:
If you are flashing a touch version of CWM recovery, I highly suggest v6.0.1.0. The later version (up to 6.0.2.5) have a bug that will make you unable to mount the SD card within the recovery. Otherwise TWRP is very interesting, but backups made with CWM are not compatible with TWRP.
Thanks, I'll try TWRP this time

Possible brick into CWM HELP PLEASE

okay so i flashed cwm recovery 6.0.1.3 to my asus transformer infinity and it was put on there fine. i went into cwm and found out that the volume keys wouldn't toggle up or down. so i thought id try to factory reset the device and maybe that will uninstall cwm and i would be able to fastboot a newer version. so i clicked on wipe when in the mode before going into cwm with the 4 options (i think its 4 cant really remember) from left to right. once i clicked on this it went into cwm so i clicked reboot device and now when i reboot it shows it asus and in top left device is unlocked then goes back to cwm where i cant toggle anything except reboot. please help i dont know what to do
your help will be greatly appreciated :good: :good:
at5678 said:
okay so i flashed cwm recovery 6.0.1.3 to my asus transformer infinity and it was put on there fine. i went into cwm and found out that the volume keys wouldn't toggle up or down. so i thought id try to factory reset the device and maybe that will uninstall cwm and i would be able to fastboot a newer version. so i clicked on wipe when in the mode before going into cwm with the 4 options (i think its 4 cant really remember) from left to right. once i clicked on this it went into cwm so i clicked reboot device and now when i reboot it shows it asus and in top left device is unlocked then goes back to cwm where i cant toggle anything except reboot. please help i dont know what to do
your help will be greatly appreciated :good: :good:
Click to expand...
Click to collapse
I don't like cwm with tf700, can you reflash twrp version 2.3.3.0 or 2.3.1.0??
buhohitr said:
I don't like cwm with tf700, can you reflash twrp version 2.3.3.0 or 2.3.1.0??
Click to expand...
Click to collapse
thats what i was thinking of doing but i dont know how if i cant get into fastboot mode via the option when going into recovery
at5678 said:
thats what i was thinking of doing but i dont know how if i cant get into fastboot mode via the option when going into recovery
Click to expand...
Click to collapse
once you in recovery (see 4 icons), use volume down to switch to USB icon, then use volume up hit it twice, now your device is in fastboot mode. Connect your usb cable (make sure usb debugging and unknow source are checked in settings). From your pc now you can flash using script or manuall push it.
buhohitr said:
once you in recovery (see 4 icons), use volume down to switch to USB icon, then use volume up hit it twice, now your device is in fastboot mode. Connect your usb cable (make sure usb debugging and unknow source are checked in settings). From your pc now you can flash using script or manuall push it.
Click to expand...
Click to collapse
yes this what i want to do but it doesnt give me these options it just goes straight from the asus emblem to cwm nothing inbetween
at5678 said:
yes this what i want to do but it doesnt give me these options it just goes straight from the asus emblem to cwm nothing inbetween
Click to expand...
Click to collapse
Possible unable to boot to system, can you use cwm to flash cromi rom and see if it boot?
limits rafromg
buhohitr said:
Possible unable to boot to system, can you use cwm to flash cromi rom and see if it boot?
Click to expand...
Click to collapse
i dont think so i cant toggle down or up in cwm, is there some other way to flash it?
There used to be a flash binary that worked with adb (I.e. via recovery). I've not seen or heard of it for a while, but the fact that recovery can still be flashed from booted Android tells me it's still available. ROM Manager and GooManager both allow you to install recovery, so I would start with decompiling those...
First you need to access you tablet (while it's booted in CWM) via adb shell.
Second, you need to verify that the recovery can access the internal eMMC - "ls /dev/block/mmcblk0*" should list at least 8 partitions.
Then, you can put a flashable zip into and the installation command onto the cache partition - the procedure is exactly the same as the method to manually install incremental dlpkgfile updates.
at5678 said:
i dont think so i cant toggle down or up in cwm, is there some other way to flash it?
Click to expand...
Click to collapse
Just want to be clear, turn off your device, then hold down volume down and power button until you see white text displayed on the screen then let go both buttons, you did not see the 4 icons?
buhohitr said:
Just want to be clear, turn off your device, then hold down volume down and power button until you see white text displayed on the screen then let go both buttons, you did not see the 4 icons?
Click to expand...
Click to collapse
my device cant turn off it just keeps rebooting and when i try to turn it off it just reboots. and no the 4 options dont come up. it just goes to asus startup it flashes then it goes straight to cwm
Hold down the power button, as soon as screen went black, let go and immediately, hold volume down and power button, until it boot up again, see if that get you into recovery.
Sent from my ASUS Transformer Pad TF700T using xda premium
buhohitr said:
Hold down the power button, as soon as screen went black, let go and immediately, hold volume down and power button, until it boot up again, see if that get you into recovery.
Sent from my ASUS Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse
didnt work. is it possible that could fix in adb shell. but when im in adb the device is not found

[Q] Unable to load recovery - XT925

Hey guys. I can't seem to get into Recovery on my XT925 for the life of me.
From power off, I press Power + Vol Up to get the boot selection screen, select "recovery" from the list, and the phone reboots into the OS.
I've flashed both CWM and TWRP recoveries. Different versions of each too. But every time I hit "Recovery" it loads the OS and I can't flash any ROMS.
Another weird thing. When I'm in Fastboot and enter "fastboot reboot-bootloader" it just reboots into Fastboot again.
Can anyone help?
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
bweN diorD said:
i dont know what the problem is but you could try downloading rom manager, it has an option to reboot into recovery, and see what happens.
Click to expand...
Click to collapse
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
pascaljr said:
I'm having the same problem. I unlocked my bootloader, rooted my 4.1.2 stock rom, installed ROM Manager, flashed the recovery, and when it goes into Recovery, I get an Android with it's belly open, and a red triangle with an exclamation mark inside it. It stays there 1 minute, and it boots. I've tried everything. Any help is appreciated.
Tks
Click to expand...
Click to collapse
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
RikRong said:
That screen is your stock recovery. Hold vol+ and tap pwr at the same time and you'll boot into recovery. Also, after you install the recovery, you need to immediately boot into it so the update binary can complete. Otherwise, your stock recovery will over ride. Honestly, it's just easier to flash a recovery in fastboot. That's the option I've used every time.
Click to expand...
Click to collapse
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
pascaljr said:
I flashed the recovery, booted into Recovery from ROM Manager, but I get the same screen, and no key combination is able to get me into recovery.
I'm actually trying to install CyanogenMod. I downloaded cm-10.1.3-xt925.zip and gapps-jb-20130812-signed.zip. To flash it through fastboot, every example uses an IMG file, not the zip file. To flash it through fastboot, should I unzip cm-10.1.3-xt925.zip and flash the boot.img inside it? Or just rename .zip from .img?
Tks
---------- Post added at 11:57 PM ---------- Previous post was at 11:07 PM ----------
Flashing it from fastboot, and entering recovery immediately after did it! Thanks
Click to expand...
Click to collapse
Sweet! Good to see you got it to work. I'm not sure why, but ROM manager doesn't always seem to work.
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Thanks a lot
mitsus said:
I'm not able to enter in recovery mode using key combination pwr + vol key up and down (pressed simultaneously).
I'm only able to do this using CMW manager (Reboot into recovery). I've flash (using fastboot) recovery-clockwork-6.0.4.4-xt925.img, but it not accessible using key combination and relative menu (If the menu choose to boot into recovery mode, it start full boot and go into OS).
I've flashed CM10, but for access to recovery i've used CMW manager. I want to have the opportunity to enter directly into recovery in case of bad flash.
Where I'm wrong?
Click to expand...
Click to collapse
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
aviwdoowks said:
So you get the : normal pwr, rec, & etc list but when you scroll vol down & then vol up to select the recovery it boot normal?
I use : all keys hold till screen out. Then while keeping on both vol toggle pwr off , on & off. Boot menu list.
If that fails, post your sequence of events.
Click to expand...
Click to collapse
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
mitsus said:
OK. So. This is the sequence:
1. Power key + Vol UP and DOWN pressed at the same time i'm able to show menu with "Recovery" option into list (others are AP Fastboot, Normal PWR, ecc)
2. Using Vol UP/DOWN key i go to Recovery option end press Power key
..phone start normally...not into recovery. I'm able to start recovery only using CWM manger or ADB.
My current recovery is ClockworkMod Recovery v6.0.4.4
Thanks
Click to expand...
Click to collapse
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
aviwdoowks said:
You are not reading!
Final action vol up to select!
Tougher than stock recovery! I guess the bootloader engineers never used their own recovery.
Click to expand...
Click to collapse
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
mitsus said:
Vol UP don't work! I've tried all key combination....including your suggestion but whenever start full OS
Click to expand...
Click to collapse
Hmmm
Well post all the recoverys you used, starting w/ the 1st.
Also where you got them.
Something has borked you.

Mediatek tools and CWM recovery

Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
perimano said:
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
Click to expand...
Click to collapse
LOL found your post just coz i wanna get 1 of them
there might be more than one recovery partition i guess so command in bootloader says to flash secure recovery when key combo pressed
does cwm stay if you boot using key combo or you have to flash again ?
i'm guessing
1 boot into cwm
2 do a full backup
3 reboot phone check in file manager backup is on external sd !!! IMPORTANT !!!
4 power off the phone
5 try other key combinations ie :
Code:
VOL- and POWER
VOL+ and VOL- and POWER
VOL+ and HOME and POWER
VOL- and HOME and POWER
HOME and POWER
you get the drift
THIS WILL 99.9% FACTORY RESET YOUR PHONE (UNLESS YOU AVOID HARD RESET COMBO)
GOODLUCK
BTW HOW IS THIS PHONE IN HAND ?>
I have a zlr f9006 and I also flashed CWM. I also can't access it via key combination but CWM Rom Manager application gives you the option to "Reboot into Recovery" which actually works!
solution
How to boot this recovery:
- Power off
- Hold VOL+ and Power (will take longer time than VOL- and Power)
- Menu shows giving you choice between ROM downloader, UART, Recovery and Normal
- Use VOL keys to choose Recovery
- CWM boots

How to Get stock recovery back on letv 1s??

i had rooted my phone and installed TWRP recovery. but as now marshmallow update is on the way i want my phone clean as new so can u please tell me steps of how to get my stock recovery back. I have unrooted my phone. but only stock recovery is remaining.. Please help me out..
dhwanil728 said:
i had rooted my phone and installed TWRP recovery. but as now marshmallow update is on the way i want my phone clean as new so can u please tell me steps of how to get my stock recovery back. I have unrooted my phone. but only stock recovery is remaining.. Please help me out..
Click to expand...
Click to collapse
Just flash the le recovery from fast boot mode and you will be back to your stock recovery
sagarjais said:
Just flash the le recovery from fast boot mode and you will be back to your stock recovery
Click to expand...
Click to collapse
Thanks for the advice..
But now while the phone is turned on, it says the device is untrusted. The device is working perfectly but i think i have void the warranty.. can i get it back again??
dhwanil728 said:
Thanks for the advice..
But now while the phone is turned on, it says the device is untrusted. The device is working perfectly but i think i have void the warranty.. can i get it back again??
Click to expand...
Click to collapse
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Thank You.. So much..
dhwanil728 said:
Thank You.. So much..
Click to expand...
Click to collapse
Have you done it??? Press thanks if I helped
dhwanil728 said:
Thank You.. So much..
Click to expand...
Click to collapse
Does it worked?
I have to get back to stock recovery and ROM.
sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Hi, tried this. recovery flashed successfully. when booted to recovery, found that its in Chinese.
renamed given rom and placed in memory, but while update got some error (could not read, as it is in Chinese).
when rebooted I was in old Rom.
Now I have 'orange state', stock recovery(in Chinese ) and a custom Rom.
what to do to remove 'orange state', stock recovery+ stock rom?
surajak said:
Hi, tried this. recovery flashed successfully. when booted to recovery, found that its in Chinese.
renamed given rom and placed in memory, but while update got some error (could not read, as it is in Chinese).
when rebooted I was in old Rom.
Now I have 'orange state', stock recovery(in Chinese ) and a custom Rom.
what to do to remove 'orange state', stock recovery+ stock rom?
Click to expand...
Click to collapse
Hey u were in orange state.....i came back from red state
May be try flashing using the smartphone flash tool?
stock recovery is not working.... actually its corrupted.
how could i remove TWRP recovery from my mobile...
pls help me ...!
sagarjais said:
Just flash the le recovery from fast boot mode and you will be back to your stock recovery
Click to expand...
Click to collapse
Hey i was just thinking that cant we flash a rom other than stock?
sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
Stock update link not working.
sagarjais said:
Hmm I think this can help u....
Hold volume down + power button until it goes to fastboot mode
Then flash twrp recovery from fastboot mode from your PC
"" I have provided below twrp and stock recovery ""
Then go to recovery using volume up and power key now connect it to your PC and u will see your device connected in mtp mode
Now copy full flash file renaming it update.zip
And also copy stock-recovery.img
Now the game begins
At first flash stock-recovery.img
Then reboot again to recovery mode
You are back into your stock recovery
Just tick on update system and clear data
And press start
Let it be done
You are back into your smartphone
Stock recovery
https://drive.google.com/file/d/0ByfrsOfLXeFgS09lUVZSZ0pjdzQ/view?usp=sharing
Twrp recovery
https://docs.google.com/uc?id=0B5KBP3GG99Q2a1BfbVZUaUh4U28&export=download
Download stock update
For x500/x507/x509
http://forum.le.com/in/eui_detail.html?euiid=208
Click to expand...
Click to collapse
I almost bricked my phone because of that stupid userdata.img inside the Twrp recovery
For 2 days I've been trying to install a rom with the twrp recovery, which always worked nice although a bit slow, but since the installed rom always had issues, this time I put not only the twrp recovery in flashboot, but also the userdata.img, which by the way there's no reference about it in any doc of the zip
As a result my phone didn't pass forward the coloured Leeco splash screen in chinese, (the one that cames before the twrp spashscreen).
I shut it down and put it on charge, but it didn't even seem to be charging! the red led was always on and the battery had no progress bar, just a 'sparkle' symbol. If that thing isn't even charging, how the hell would I enter fastboot?
Thankfully I got back the normal recovery and bootloader.
So, anyone reading, DO NOT flash userdata.img in fastboot!

Categories

Resources