I have 2 Zebra TC51 mobile scanners that are unusable because both units are locked with a pin code.
I’ve been trying to reset the units to factory setting through the recovery console, but with no luck because Zebra has it locked down.
I’ve tried downloading the latest TC51 software roms from the Zebra site, but with no luck. Zebra will not allow me to download the software because it is “restricted” even though my warranties are valid through mid-2018—the serials are valid per Zebra’s warranty check.\
Can anyone upload to me the latest TC51 software so I can reset the units? Or, does anyone have knowledge on how to reset the phone to factory settings so I can bypass the pin lock screen?
Model number is TC510K-1PAZU2P-US (the box has GSM one it, not sure if it is GMS or non-GMS sinec I cannot get into the unit.
Timexis said:
I have 2 Zebra TC51 mobile scanners that are unusable because both units are locked with a pin code.
I’ve been trying to reset the units to factory setting through the recovery console, but with no luck because Zebra has it locked down.
I’ve tried downloading the latest TC51 software roms from the Zebra site, but with no luck. Zebra will not allow me to download the software because it is “restricted” even though my warranties are valid through mid-2018—the serials are valid per Zebra’s warranty check.\
Can anyone upload to me the latest TC51 software so I can reset the units? Or, does anyone have knowledge on how to reset the phone to factory settings so I can bypass the pin lock screen?
Model number is TC510K-1PAZU2P-US (the box has GSM one it, not sure if it is GMS or non-GMS sinec I cannot get into the unit.
Click to expand...
Click to collapse
Hi There,
I am in need of the same factory reset files i think it is the T51N0MXXXRFxx01203.zip file that is needed.
If someone has it could they please share it as the unit i have is basically an expensive paper weight at the moment
Any help appreciated :good:
Bump anyone have this file T51N0MXXXRFxx01203.zip ?
4Thanks
you'll have to create an account and possibly call in to get the online portal activated (as long as your device is under warranty), but https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/tc51.html
same here
same here TC510K-1PAZU2P-US model attempting to get support from Motorola as suggested by a zebra forum senior member , i will take his advice as a hint of course
could at least get that eom unlock code for device 16324522500633
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know if it applies to the tc50 but I have a tc70 which is locked with Walmart software . if it helps I managed to glitch into settings during factory reset which I was able to get into and do some cool things like access camera edit pictures create lock screen and uninstall disable apps etc... not sure what exactly I need to disable to bypass Walmart setup app. but if you like to know the process lmk
Seaofdep said:
I don't know if it applies to the tc50 but I have a tc70 which is locked with Walmart software . if it helps I managed to glitch into settings during factory reset which I was able to get into and do some cool things like access camera edit pictures create lock screen and uninstall disable apps etc... not sure what exactly I need to disable to bypass Walmart setup app. but if you like to know the process lmk
Click to expand...
Click to collapse
please enlighten us , thank you for your time , how do you glitch out your device to access certain areas?
Sorry for the late response @24bitgaiden might not be enlightening because Not sure if I figured this out or it's known but on the tc70 when factory rested and after prompted to enter id to reset and you select continue device will restart during this time zebra/Android logo will appear followed by symbol touch computer screen. Next will be the stage factory reset process (first is a yellow load bar then green ) during this time you repeatedly tap the overview button and home button after each other . Every few taps hold the home button . Repeat till internet browser opens or express on overview screen . On overview screen you can press and hold web browser and select app info or on web browser click bookmarks press and hold click on share then email choose manual setup followed by certificate install which will be followed by must have lock screen and click setup .. well at this point you should have an idea of what to do . I have disable uninstalled apps acceded camera took pictures and videos edited and shared videos acceded settings etc.....
My apologies. If I am not making sense , LMK how it goes or if a video of process is needed
Seaofdep said:
My apologies. If I am not making sense , LMK how it goes or if a video of process is needed
Click to expand...
Click to collapse
thanks. makes plenty of sense . did something similar trying to crash the launcher in this handset but there wasnt much there i can mess with .
this file might be useful for others its the motorola tc55 Enterprise Reset Package
143kb
https://drive.google.com/open?id=1I8IkHiJg2t6btgrdsRNcTgg0WZ90vO-z
still searching for the motorola /zebra tc51 Enterprise Reset Package file @ 349kb
cant believe its so difficult to obtain.
Are you guys talking about an FRP lock on a Zebra or just a pin lock ? If your referring to the google lock I just unlocked one a TC510k WIth the september security patch so I would be more than happy to post either the method step by step or a link to where you can find the info. IM me let me know.
Yeah two different models , what a shame was hoping someone can maybe add or figure out how to unlock the tc70 with this method not sure what I need to disable
Yes please I would greatly appreciate it, I’ve been troubleshooting for the last 7 hours and have gotten no where
Yes please help
clothtalklp said:
Are you guys talking about an FRP lock on a Zebra or just a pin lock ? If your referring to the google lock I just unlocked one a TC510k WIth the september security patch so I would be more than happy to post either the method step by step or a link to where you can find the info. IM me let me know.
Click to expand...
Click to collapse
. YES COULD YOU PLEASE POST THE STEP BY STEP METHOD OR A LINK WHERE I CAN FIND THE INFO. I would greatly appreciate it.
I hope this will help you with factory reset.
bacahil said:
I CAN HELP GAIN FULL ACCESS TO ZEBRA TC-70 DEVICES! :good:
Click to expand...
Click to collapse
I have done the mp40 now im on the tc51 working on root then I got the 70. hit me up with any usefull tips or software
clothtalklp said:
Are you guys talking about an FRP lock on a Zebra or just a pin lock ? If your referring to the google lock I just unlocked one a TC510k WIth the september security patch so I would be more than happy to post either the method step by step or a link to where you can find the info. IM me let me know.
Click to expand...
Click to collapse
Whats the steps to remove frp on this model??
---------- Post added at 10:27 AM ---------- Previous post was at 10:25 AM ----------
bacahil said:
I CAN HELP GAIN FULL ACCESS TO ZEBRA TC-70 DEVICES! :good:
Click to expand...
Click to collapse
what about TC510K frp?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
King4444 said:
I have done the mp40 now im on the tc51 working on root then I got the 70. hit me up with any usefull tips or software
Click to expand...
Click to collapse
Any luck removing frp on tc510k
Could use the firmware file for the Tc51
Could use the firmware file for the Tc51
King4444 said:
I have done the mp40 now im on the tc51 working on root then I got the 70. hit me up with any usefull tips or software
Click to expand...
Click to collapse
Tc51 help please
clothtalklp said:
Are you guys talking about an FRP lock on a Zebra or just a pin lock ? If your referring to the google lock I just unlocked one a TC510k WIth the september security patch so I would be more than happy to post either the method step by step or a link to where you can find the info. IM me let me know.
Click to expand...
Click to collapse
Hey I am currently trying to do the same thing, if you could describe it step by step and link the data/ info/ rom needed I would be extremely appreciative. I'm new to all this but hoping to get my toes wet. Thank you
---------- Post added at 08:13 AM ---------- Previous post was at 07:53 AM ----------
bacahil said:
I CAN HELP GAIN FULL ACCESS TO ZEBRA TC-70 DEVICES! :good:
Click to expand...
Click to collapse
Hello I am in need of your help, it would be greatly appreciated. I am willing to work out something that would benefit both parties. Please let me know asap
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the MediaPad M3 Lite 10 LTE - Tablet from Huawei.
In my case, I´m looking for a C-ROM and C-Recov (e.a. RR, Mokee, TWRP) for the
Huawei MediaPad M3 Lite 10 LTE (BAH-L09) with Android 7.0 and EMUI 5.1
Since it´s quite new on the market it´s atm hard to find anything bout a C-ROM or even a C-recovery.
discoveries
advises
questions
tipps / tricks
productive discussions
solutions
are much appreciated.
Detailed device Informations:
Nobody knows any thread about this tablet??
Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.
essayn said:
Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.
Click to expand...
Click to collapse
If you need some help and i can do something, tell me
skymota said:
If you need some help and i can do something, tell me
Click to expand...
Click to collapse
I much appreciate the offer but what could u do if u haven´t the device or do u own it ?
Since my CM2-Infinity-box doesn´t work (usually I work with Miracle Box but it´s not compatible ...well the Tablet has to be rooted to read the firmware..), and literally tried all rooting-apps and progs, this device is really stubborn!
I own this device, thats what i told you
skymota said:
I own this device, thats what i told you
Click to expand...
Click to collapse
Very well. ?
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?
essayn said:
Very well.
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?
Click to expand...
Click to collapse
search and read a lot about this but i cant...
skymota said:
search and read a lot about this but i cant...
Click to expand...
Click to collapse
Well, to bad but I guessed so, since this device is atm not rootable. :/
I tried every single Flash-Box like MB, Infinity, Aladdin, Falcon etc pp.. any Rooting-App (APK & PC- based), almost a dozen flash-tools like ADT, AOS-flasher, Ultimate Backup-tool etc...and several command prompts via ADB&Fastboot.
Really Nothing helped to get a nandroid- or even a dumb ROM. From which I could extract the stock recovery.
Nevermind, I will try alil more with Holo- & Heliumbackup, which surely wont work but who knows, rite ??
I'm patient and as soon as I've found a solution I'll share it here immediately.
As any other user is welcome to do so, too.
I´ve managed to extract the stock-recovery via an OTA-update which came from Firmware Finder from Team MT.
U ´ll find the recovery on G-Drive. The "oldRECOVERY.img" is the extracted stock-recovery from the original BAH-L09C100B018 firmware!
So, since I´ve updated the Tablet, the only "RECOVERY.img"-named file is from the newest firmware which is L09C100B021!
If u wanna update to ...021, via the Firmware Finder-App, u need
The App
Time
Be aside your tablet
and watch this video before u start
May read this thread aswell
I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?
jenkins-1984 said:
I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?
Click to expand...
Click to collapse
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456 <- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".
essayn said:
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456<- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".
Click to expand...
Click to collapse
Ok cheers, I looked on the emui site and was nothing under their tablet menu only phones on the unlock bootloader page, on Nexus you just enable usb-debugging and click the OEM unlock in settings and fastboot flashing unlock in terminal. Sony uses a custom tool and HTC via their website I had a few phones in the past and built roms etc this my first Huawei device apart from my Nexus 6p Huawei help build with Google. I take it this device no official forum atm only the Kirin version.
Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.
essayn said:
Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.
Click to expand...
Click to collapse
It's on latest official that came with device, I take it there is no twrp or anything out for this device ATM?
Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com
essayn said:
Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com
Click to expand...
Click to collapse
I'm not bothered about updating the firmware ATM more so custom recovery but will look into it after my holiday.
I have requested official forum for this device and looks to be accepted so hopefully get some development going for this device soon...
There seems to be no way to retrieve the unlock code for Wifi-only tablets from the official Huawei site, as it demands the IMEI which is obviously missing.
I have contacted Huawei support with the product ID and serial number of my M3 Lite 10. One day later I have received the unlock code. I think that having been polite has helped
.
Storage question
Hello,
First of all: sorry, if the question is 'noobish', but as a matter of fact I am noob as far as android is concerned
I just bought this tablet for my son (LTE version), and I was quite surprised to find out that I can't move the installed applications to SD card.
Are there any hints and tips on how to take advantage of the big SD card, so my son's game data would not have to be stored in the internal memory?
The only default option is to change the memory from internal to SD, after the tablet restarts. But I assume it uses then only the SD card, and I am looking for a solution I remember from Samsung phone, where I could choose certain apps to move from internal memory to SD.
Another question, just by the way, is following: when I install an apk file from the SD card, during the installation process every few seconds I get a pop-up saying the application is not responding (although the installation is in progress). Any way to disable those annoying pop-ups?
I'd appreciate any feedback
I just won an S8+ on eBay only to realise that it was Google blocked... I haven't paid for it yet but I did do a check if it was blacklisted or stolen and it comes up clean...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like it needs the FRP reset method done. This is my first post on the S8 forum, and starting research on the S8, as I have one arriving next week
I just did an FRP reset on an S7 Edge. It took me several days, all day long, to finally find the method which worked on my phone. There are a lot of videos and posts with various methods... egads.
Once that method was processed, it took about 30 minutes to finally have the FRP gone and the soft reset finalize it.
If the seller on eBay did not advertise it as being Google account locked, you may want to consider a refund. Given the hardware is all ok (?), you might/should be able to un'FRP it. As I just looked at a few google search results, seems similar to the S7 method. I wonder why the seller did not un-F(a)RP it?
Do a Google search for 'S8 FRP Bypass'.
Can I just re flash stock firmware and then custom Rom?
BL4CK-H4T said:
Can I just re flash stock firmware and then custom Rom?
Click to expand...
Click to collapse
Good question. I asked that as well and never got an answer... frustrating, so I am not sure.
My thinking leads to 'why not', as a full re-flash I'd think also writes over the Persistence directory/file, however, if it were that simple I'd a thought I would have come across a post, how-to or video, or post reply to my questions, stating yes, it can be solved in that manner.
So my post research and experimentation experience thinks once the FRP is tripped, the system prevents a simple flashing over of the Persistence partition/file with stock.
---------- Post added at 02:19 PM ---------- Previous post was at 02:17 PM ----------
I just posted a response... TWICE, where'd it go.
---------- Post added at 02:23 PM ---------- Previous post was at 02:19 PM ----------
Wow, that message posting lag has been about 10 minutes! I sent you a PM.
Yeah because my bosses S7 I put him a custom Rom Batman Rom and I forgot to tick oem unlock and debugging and it went into FRP LOCK...
I can't remember what we did but we never used combination thingy...
I just remember putting the stock firmware on and it worked
S8 plus
tnap1979 said:
hey guys..
both you, message me, ive done both s7 and s8, recently... very easy
Click to expand...
Click to collapse
How?
Ok so I got this phone frp unlocked remotely, but the imei number on the phone back and box is the same but the phone itself *#06# comes up as dual SIM G955FD...
The phone finds the sim but still says no service I have flashed multiple csc files but still no luck so what's the issue I spent so much time and money in this poop fone
Is it 'supposed' to be a dual SIM phone by OEM model?
If so does it have the original stock firmware on it, or if not what has it been changed to.. ?
My S8+ suddenly stopped working because it says "FRP Locked". So the phone won't even boot.
Any advice?
You can I stall the factory binary to bypass frp. And it's that simple.
TheMadScientist said:
You can I stall the factory binary to bypass frp. And it's that simple.
Click to expand...
Click to collapse
Mad Scientist, so when you (re)install the factory binary, it overwrites the Pervasive, or what ever it is called, partition as well, which holds the FRP breach/info?
I did not think that worked, as it was too obvious and too easy a fix.
Please clarify.
JeffDC said:
Mad Scientist, so when you (re)install the factory binary, it overwrites the Pervasive, or what ever it is called, partition as well, which holds the FRP breach/info?
I did not think that worked, as it was too obvious and too easy a fix.
Please clarify.
Click to expand...
Click to collapse
The s8 factory combo test firmware does yes....
It did on mine when I changed my google password and fac reset Its a snapdragon right.....
Some people also install the eng boot and google frp adb bypass command...
TheMadScientist said:
The s8 factory combo test firmware does yes....
It did on mine when I changed my google password and fac reset Its a snapdragon right.....
Some people also install the eng boot and google frp adb bypass command...
Click to expand...
Click to collapse
OK, Snapdragon only, then. Thanks for that info.
Is there a simple method, like that one, for Exynos?
JeffDC said:
OK, Snapdragon only, then. Thanks for that info.
Is there a simple method, like that one, for Exynos?
Click to expand...
Click to collapse
Ahhh yes. I do not know as I havn't had one to try.
Hi.
I bypass it fith Combination FW.
I forgot password and flash combination then stock rom and all fine.
Here is combination for 955f/fd
https://androidfilehost.com/?fid=745425885120753748
marvin_666 said:
Hi.
I bypass it fith Combination FW.
I forgot password and flash combination then stock rom and all fine.
Here is combination for 955f/fd
https://androidfilehost.com/?fid=745425885120753748
Click to expand...
Click to collapse
Interesting. I would have though there was a software/OS method, but then I thought that Samsung would have made entrance into the Persistence partition like a vault door.
So am I understanding you all, an Exynos phone can be flashed with a combination file(?), and afterwards the OEM ROM, and that deletes the FRP file/Persistence partition? What slot would the combo file be used with in Odin?
I learn something new every day.
The problem is, I forget at least two things I've learned, every day
Thanks.
JeffDC said:
Interesting. I would have though there was a software/OS method, but then I thought that Samsung would have made entrance into the Persistence partition like a vault door.
So am I understanding you all, an Exynos phone can be flashed with a combination file(?), and afterwards the OEM ROM, and that deletes the FRP file/Persistence partition? What slot would the combo file be used with in Odin?
I learn something new every day.
The problem is, I forget at least two things I've learned, every day
Thanks.
Click to expand...
Click to collapse
Yes. You need to flash it as AP and flash Home Csc from your FW. Then you must go to setting and apply usb debugging. Then flash your Fw and you can to log in with other google account.
My advice is ... stop buying stolen phones = stopping phones being stolen.
s327374 said:
My advice is ... stop buying stolen phones = stopping phones being stolen.
Click to expand...
Click to collapse
You can (actually) legally purchase once stolen phones, and they come out legit from a court ordered police property room auction.
s327374 said:
My advice is ... stop buying stolen phones = stopping phones being stolen.
Click to expand...
Click to collapse
Or, if you're like me, you buy broken phones. Phones with shattered screens and non-responsive LCDs, that the previous owners sell trying to recoup some of their money rather than pay to repair it themselves. Often when I replace the screen, I'm faced with FRP lock.
One time, I sold a phone I purchased brand new and owned legally. Sold it on Swappa to a guy in Florida (I'm in Oklahoma). What did my stupid ass do? I forgot to remove my account before resetting it, thus tripping the FRP.
So you CAN actually legally buy a legitimate, not stolen phone, and have FRP on it.
Hello guys, first of all english isnt my native language so if i have orthographic mistakes i am sorry.
WHAT YOU NEED FOR THIS:
a)$19 in your credit or debit card to buy license on DC-unlocker
b)your phone have to be detected as come 1.0 mod or usb ser or even if you cant detect your device on PC USE TESTPOINTS to force detection (when your phone is detected as USB ser you will need to install those drivers http://www.mediafire.com/file/ob6ii95ybktzb5n/HUAWEI_USB_COM_1.0_driver.zip)
to install drivers go to USB ser on driver manager right click on it and select update driver> browse my computer for driver software> select the extracted file in desktop with the drivers (x64 or x86 depending on your OS)
c)Disassembly huawei mate 9 so you can see testpoints:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
d) electrical wire to touch testpoints:
like this little thing, it gave my mate 9 a new life <3
EDGES HAVE TO BE PEELED
GUIDE WITH THIS VIDEO HOW TO FORCE COM 1.0 detection : https://www.youtube.com/watch?v=tfaj_1dGRKw
I have been reading a lot of posts about BRICKED MATE 9 before trying to update to OREO, FRP lock and PHONE LOCKED(locked bootloder) and no one is giving solutions, now after weeks of searching and trying i found a solution gathering information from a lot of posts and thanks to DC-Unlocker/HCU Clients/DC-Phoenix.($19.00 dollars for 72 hours)
ok now THE SOLUTION <3:
1) first of all you have to buy license for dc-unlocker here: https://www.dc-unlocker.com/buy
2) when you have bought the license download this : https://www.dc-unlocker.com/download/soft.php?file=7JPrdoVQ
3) when download finish create a new folder in desktop ''DClient'' and extract .zip in there
4) open .EXE file called dc-unlocker2client and when it opens click on ''access support area'' (not necessary to be logged in)
5) Now on suport area look for DC-unlocker softwares>DC-Phoenix>DC_Phoenix_v50.rar>click on it and then click download button
6) extract dc_phoenix_v50.rar in desktop and open the program, it will ask you for credentials (emailed to you after purchasing license for 72 hours(3 days)
7)click on ''Download Files'' button and when your explorer opens, search STOCK FIRMWARE the one that comes flashed the first time you turn on your phone(mha-l09 or mha-l29) even if you rebranded it, for example MHA-l09_C185 (the one i used) you have to download firmware .app and hw.app
8) download factory firmware from here
http://www.mediafire.com/file/de139..._China_Nonspecific_Android_7.0_EMUI_5.0.dgtks
10) after that follow this GUIDE:
https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode (for com 1.0) in case flash fails retry it, but in fastboot VL-d + power button
maybe you get a green screen with blue and red boxes, but dont worry its because you dont have vendor flashed, you can fix it with HCU client on ''repair UMTS'' tab
11) when you finish you can follow this video to rebrand your huawei to get rid of RND90m test- keys baseband error: https://www.youtube.com/watch?v=8OywEYZ2cbw
12) you are all set, just follow HCU imei repair guide to fix IMEI, VENDOR, SERIAL NUMBER.
http://hcu-client.com/huawei-phone-imei-repair-tutorial/
hack4ever said:
Hello guys, first of all english isnt my native language so if i have orthographic mistakes i am sorry.
WHAT YOU NEED FOR THIS:
a)$19 in your credit or debit card to buy license on DC-unlocker
b)your phone have to be detected as come 1.0 mod or usb ser or even if you cant detect your device on PC USE TESTPOINTS to force detection (when your phone is detected as USB ser you will need to install those drivers http://www.mediafire.com/file/ob6ii95ybktzb5n/HUAWEI_USB_COM_1.0_driver.zip)
to install drivers go to USB ser on driver manager right click on it and select update driver> browse my computer for driver software> select the extracted file in desktop with the drivers (x64 or x86 depending on your OS)
c)Disassembly huawei mate 9 so you can see testpoints:
d) electrical wire to touch testpoints:
like this little thing, it gave my mate 9 a new life <3
EDGES HAVE TO BE PEELED
GUIDE WITH THIS VIDEO HOW TO FORCE COM 1.0 detection : https://www.youtube.com/watch?v=tfaj_1dGRKw
I have been reading a lot of posts about BRICKED MATE 9 before trying to update to OREO, FRP lock and PHONE LOCKED(locked bootloder) and no one is giving solutions, now after weeks of searching and trying i found a solution gathering information from a lot of posts and thanks to DC-Unlocker/HCU Clients/DC-Phoenix.($19.00 dollars for 72 hours)
ok now THE SOLUTION <3:
1) first of all you have to buy license for dc-unlocker here: https://www.dc-unlocker.com/buy
2) when you have bought the license download this : https://www.dc-unlocker.com/download/soft.php?file=7JPrdoVQ
3) when download finish create a new folder in desktop ''DClient'' and extract .zip in there
4) open .EXE file called dc-unlocker2client and when it opens click on ''access support area'' (not necessary to be logged in)
5) Now on suport area look for DC-unlocker softwares>DC-Phoenix>DC_Phoenix_v50.rar>click on it and then click download button
6) extract dc_phoenix_v50.rar in desktop and open the program, it will ask you for credentials (emailed to you after purchasing license for 72 hours(3 days)
7)click on ''Download Files'' button and when your explorer opens, search STOCK FIRMWARE the one that comes flashed the first time you turn on your phone(mha-l09 or mha-l29) even if you rebranded it, for example MHA-l09_C185 (the one i used) you have to download firmware .app and hw.app
8) download factory firmware from here
http://www.mediafire.com/file/de139..._China_Nonspecific_Android_7.0_EMUI_5.0.dgtks
10) after that follow this GUIDE:
https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode (for com 1.0) in case flash fails retry it, but in fastboot VL-d + power button
maybe you get a green screen with blue and red boxes, but dont worry its because you dont have vendor flashed, you can fix it with HCU client on ''repair UMTS'' tab
11) when you finish you can follow this video to rebrand your huawei to get rid of RND90m test- keys baseband error: https://www.youtube.com/watch?v=8OywEYZ2cbw
12) you are all set, just follow HCU imei repair guide to fix IMEI, VENDOR, SERIAL NUMBER.
http://hcu-client.com/huawei-phone-imei-repair-tutorial/
Click to expand...
Click to collapse
hi mate thanks alot for the help i was finally able to bring my phone back to life but still i am stuck as i am unable to flash any firmware on the phone i tryed HWOTA method and also tryed to flash with DC phoenix HWOTA method is not working at all and it doesnt accept my unlock code as well when my bootloader is already unlocked and in dc phoenix no matter which firmware i try to install end result comes to error downloading 5 of 26 please help i have also tryed it after repairing umts and restore the imei my model is from australian vodafone network and Model number should MHA-L09BC346 but i have also tryed MHA-L09C346 MHA -L09C342 but nothing seems to work
I tryed this method and it worked like a charm thanks alot but only issue is now i am stuck in service rom which is still usable and same like a stock firmware but i am unable to perform any fastboot updates or changes it comes up as remote command not allowed even my bootloader and frp are unlocked and i cant find any oem unlock options or usb debugging enable or disable options in developer options but still thanks alot as its still usable please update if any solutions are found
hack4ever said:
USE TESTPOINTS to force detection
Click to expand...
Click to collapse
You forgot to tell us what are these "testpoints" and where are they located, depending on the phone model.
awais_666 said:
I tryed this method and it worked like a charm thanks alot but only issue is now i am stuck in service rom which is still usable and same like a stock firmware but i am unable to perform any fastboot updates or changes it comes up as remote command not allowed even my bootloader and frp are unlocked and i cant find any oem unlock options or usb debugging enable or disable options in developer options but still thanks alot as its still usable please update if any solutions are found
Click to expand...
Click to collapse
You have NRD90M test-keys on Build Number ?
cr2 said:
You forgot to tell us what are these "testpoints" and where are they located, depending on the phone model.
Click to expand...
Click to collapse
Hi friend heres a picture of testpoints location:
i dont know what testpoints are the only thing i know is that when you make a ''Bridge'' with the cable on both testpoints the PC will detect your hardbricked mate 9, if your mate 9 isn't hardbricked and its detected by the computer its not necessary to use testpoints.
watch this, so you will understand what i mean with make a bridge between 1st and 2nd testpoint
https://www.youtube.com/watch?v=tfaj_1dGRKw
hack4ever said:
You have NRD90M test-keys on Build Number ?
Click to expand...
Click to collapse
yes thats right
awais_666 said:
yes thats right
Click to expand...
Click to collapse
Excellent, all you have to do is:
go to HCU client> Enable Manufacture mode(dial *#*#2846579#*#*)>Repair UMTS tab> Country option (you have to check it)> then type ''EU'' and click REPAIR
I hope you still have time in HCU client friend i will be looking if you need something before your 72 hours ends.
hack4ever said:
when you make a ''Bridge'' with the cable on both testpoints the PC will detect your hardbricked mate 9
Click to expand...
Click to collapse
OK, now i got it. It seems that you are forcing the CPU info BOOTROM mode, which allows a direct USB-SERIAL upload of the XLOADER into CPU SRAM, which initializes the SDRAM and loads FASTBOOT info SDRAM. After that you just use FASTBOOT for flashing the stock firmware.
cr2 said:
OK, now i got it. It seems that you are forcing the CPU info BOOTROM mode, which allows a direct USB-SERIAL upload of the XLOADER into CPU SRAM, which initializes the SDRAM and loads FASTBOOT info SDRAM. After that you just use FASTBOOT for flashing the stock firmware.
Click to expand...
Click to collapse
yes i think, but it didnt worked with fastboot for me, i used DC-phoenix, it seems like with DC-phoenix you cand do whatever you want even if your bootloader is blocked, (when your mate 9 is hardbricked you cant open fastboot, DC-phoenix install fastboot, recovery mode and update mode with the factory firmware i uploader)
DC-phoenix bypass the update verification.
hack4ever said:
Excellent, all you have to do is:
go to HCU client> Enable Manufacture mode(dial *#*#2846579#*#*)>Repair UMTS tab> Country option (you have to check it)> then type ''EU'' and click REPAIR
I hope you still have time in HCU client friend i will be looking if you need something before your 72 hours ends.
Click to expand...
Click to collapse
i did it previously and fixed imei with that but issue was same anyways i thought it was a good chance of to switch so i sold the phone with same rom thanks alot for giving life to my dead phone highly appreciated
awais_666 said:
i did it previously and fixed imei with that but issue was same anyways i thought it was a good chance of to switch so i sold the phone with same rom thanks alot for giving life to my dead phone highly appreciated
Click to expand...
Click to collapse
aw ok, it had solution but thats good you sold it maybe you can buy a better phone, good luck. the solution was to change country from ''all'' to ''EU''
hack4ever said:
DC-phoenix you cand do whatever you want even if your bootloader is blocked
Click to expand...
Click to collapse
This is true, but the most critical information you have provided is about shortening the testpins.
This is the same as shortening 'Pin 1-2' in this document
https://github.com/96boards-hikey/tools-images-hikey960/blob/master/README-technical.md
to flash the partition table,xloader and fastboot.
cr2 said:
This is true, but the most critical information you have provided is about shortening the testpins.
This is the same as shortening 'Pin 1-2' in this document
https://github.com/96boards-hikey/tools-images-hikey960/blob/master/README-technical.md
to flash the partition table,xloader and fastboot.
Click to expand...
Click to collapse
i dont know im just giving the way how i fixed my hardbricked mate 9 using testpoints i dont know what testpoints are the only thing i know is that it helped to fix my phone
I managed to brick one of my Mate 9s earlier today. It was a pain to get into (it's hard to get between the display and the case), but it's nice that there's still a way to recover.
That's what I get for trying to repair the seemingly dead cell modem. Hopefully it'll work when this all finishes.
irony_delerium said:
It was a pain to get into (it's hard to get between the display and the case), but it's nice that there's still a way to recover.
Click to expand...
Click to collapse
Can you tell about your experience with the opened Mate 9 ?
I don't want to open mine without a good reason (happily running LineageOS 15 now).
Mate 9 does not have the serial console on UART5 or 6, the board_id is different,
but it is still interesting to knowif the hikey960 ramloader can start fastboot.
I'm not sure what loader was used, though my gut says it is the HiKey loader.
In any case, the biggest issue is getting the back separated from the rest of it. I've got an iFixit toolkit here which had enough to get into it (though I ended up using a 1mm flathead bit to remove the screws at the bottom since I didn't have a T2). It took me about 15 minutes to get the back off because it's pretty firmly attached and there aren't really any open spots around the edge to get tools into. The plastic opening tool and guitar picks included were helpful, though I also ended up making use of a hair clip to actually finish popping it up.
You do need to be careful taking the back off once you've got it separated, there is a flex cable attached to it with the flash, fingerprint reader, and power/volume controls.
From there, I disconnected the battery, shorted out the specified test points, and it showed up for downloading fastboot.
---------- Post added at 12:21 AM ---------- Previous post was at 12:13 AM ----------
Also, if you do end up having to follow this method to restore, you'll probably want to do it on a disposable install of Windows. The Windows drivers specified in the OP are unsigned, and the DC Phoenix package gets flagged by Windows Defender as a trojan.
(Not to mention that you _must_ restore the serial numbers and IMEIs, as they get wiped out in the process. The phone will come back up with a serial number of 0123456789ABCDEF and a pair of 000000000000000 IMEI numbers.)
In the end, it does work, but going through this process on any system that you don't think of as disposable is possibly asking for trouble.
It works just perfect... Thanks you all... If any of you Guys need help Just write
i paid $5 dollars in a phone repair store to open my mate 9, but im in El Salvador i dont know in USA, i hope you get to open your phone guys and fix it succesfully
irony_delerium said:
I'm not sure what loader was used, though my gut says it is the HiKey loader.
In any case, the biggest issue is getting the back separated from the rest of it. I've got an iFixit toolkit here which had enough to get into it (though I ended up using a 1mm flathead bit to remove the screws at the bottom since I didn't have a T2). It took me about 15 minutes to get the back off because it's pretty firmly attached and there aren't really any open spots around the edge to get tools into. The plastic opening tool and guitar picks included were helpful, though I also ended up making use of a hair clip to actually finish popping it up.
You do need to be careful taking the back off once you've got it separated, there is a flex cable attached to it with the flash, fingerprint reader, and power/volume controls.
From there, I disconnected the battery, shorted out the specified test points, and it showed up for downloading fastboot.
---------- Post added at 12:21 AM ---------- Previous post was at 12:13 AM ----------
Also, if you do end up having to follow this method to restore, you'll probably want to do it on a disposable install of Windows. The Windows drivers specified in the OP are unsigned, and the DC Phoenix package gets flagged by Windows Defender as a trojan.
(Not to mention that you _must_ restore the serial numbers and IMEIs, as they get wiped out in the process. The phone will come back up with a serial number of 0123456789ABCDEF and a pair of 000000000000000 IMEI numbers.)
In the end, it does work, but going through this process on any system that you don't think of as disposable is possibly asking for trouble.
Click to expand...
Click to collapse
about drivers turn off the driver signature verification from ''start up settings'' you can get there on ''advanced start'' on windows 10 and DC-phoenix is not a trojan
So what do you folks think of the new Lenovo Smart Tab P10? I just ordered one because my LG G Pad 8.3 v500 is very long in the tooth and I finally just got tired of waiting for a good spec tablet with plenty of storage and memory to show up. It only has a midrange Snapdragon 450, but the storage a memory make up for that.
https://www.lenovo.com/us/en/smart-tab/
I was looking for a owners manual to read and found this. Looks like replacing the battery in the future won't be too bad. I'll cross my fingers and hope that the bootloader is unlockable.
https://download.lenovo.com/consumer/mobiles_pub/tab_p10_hmm_en_201812.pdf
https://fccid.io/O57TBX705F/User-Manual/User-Manual-R1-pdf-4117204.pdf
Open Source Code
TB-X705F (Wi-Fi)
https://support.lenovo.com/us/en/downloads/DS506312
TB-X705L (LTE)
https://support.lenovo.com/us/en/downloads/DS506313
Stock Roms
TB-X705F (Wi-Fi)
Lenovo TB-X705F_USER_S000017_20180831_Q00020_ROW Factory ROM [androidhost.ru].zip
TB-X705L (LTE)
Lenovo TB-X705L_USER_S000023_20180921_Q00020_ROW Factory ROM [androidhost.ru].zip
I received my Lenovo Smart Tab P10 (TB-X705F) a few weeks ago. It's a nice tablet with good features. The only thing I'm struggling with is unlocking the bootloader. The developer options have the "Allow OEM unlocking" setting and I've enabled it, but no unlock commands are recognized when in fastboot mode. The error is "FAILED (Unknown command)". I've tried "fastboot oem unlock", "fastboot oem unlock-go", "fastboot flashing unlock" etc.
I hope Amazon didn't force Lenovo to lock down the bootloader because it has Alexa poopoo installed. I figure there will be a Chinese exploit for this and the LTE version eventually.
I couldn't stand Alexa and disabled it. I'm looking forward to TWRP so I can make a backup, root and install Adaway.
Same here....
Hey guys, I got the same issue, all unlock commands are unknown. Has anybody got a fix yet?
I had no problem with the bootloader, Tb-x704v. Install most recent https://devsjournal.com/download-minimal-adb-fastboot-tool.html it solved some of my issues.
I bought one a few weeks ago... No dock though. Seems ok, their os is pretty slim though, can't wait for some development.
it is project treble supported but still no lineage 16.1 (pie)? for lenovo tab P10 TB-X705L
Hi, you should be able to unlock bootloader with this command:
fastboot oem enable-unlock-once
TWRP
I installed the TWRP Builder app, but it couldn't extract the recovery image and build.prop file because I don't have root. Do you think that a TWRP recovery can be made from the older firmware in my first post? It has a recovery.img file, but couldn't find a build.prop file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How do we get this device in to it's only device thread? When you search for it through "my device" in the xda app it doesn't come back with a correct result. Maybe it will also get more community development by doing that.
Any hope lineage 16.1 for lenovo tab P10
Hello all,
Any developments on this device. What are the chances of getting rid of the echo features and make it a Google assistant instead?
Can anybody share the alexa show mode apk? I'm downloading the firmware but it is taking ages
Any one been able to install the Google Now Launcher in this tablet? The Play Store message says that it's incompatible with this tablet.
Thanks for any assistance!
Did anybody try to unlock the bootloader in Linux?
I successfully rooted Z3 Play in Linux while it didn't work in Windows
Can anybody find full ROM in lollinet (where I can find Moto/Lenovo ROM)?
I've tried installing the stock images that are posted and keep getting a signature error using the recovery. I noticed that the image doesn't have a system.img but rather system_1.img-system_32.img. Is there a way to package the system files to install the new system? Having an issue with the OTA and it keeps wanting to install the PRN rather than the ROW image. Any thoughts?
Anyone successfully root this as of yet? Not seeing any TWRP for it or an approach.
I today received an update to Android 9 on my tablet. Was kind of surprised. Anyone else can confirm?
Update contains new "Le Tab UI".
so there is no way to root this tablet?
gforums said:
I today received an update to Android 9 on my tablet. Was kind of surprised. Anyone else can confirm?
Update contains new "Le Tab UI".
Click to expand...
Click to collapse
Confirmed. I'm at Android 9 after an OTA update.
Chaser
---------- Post added at 08:27 PM ---------- Previous post was at 07:58 PM ----------
ZHIONZY said:
so there is no way to root this tablet?
Click to expand...
Click to collapse
My tablet is rooted. I found a root solution a little while back, but I haven't posted it yet because it's not very user-friendly. Basically it requires that you do a fresh install of Oreo and it gets bricked on an OTA update. If you're interested in getting it rooted like that then send me a private message. If there's enough interest I'll create a root thread. I consider myself quite capable with Android but not a full expert. I'm really hurting without custom recovery and without a fastboot OEM unlock that works longer than once. That temporary unlock command successfully allows me to swap out the bootloader image but upon reboot it doesn't like the new image as it asks for a password that must be part of the bootloader security because it won't accept any passwords that I have set. Perhaps with a root thread we could all contribute to getting this working. I have two of P10s now so I'm able to test on my spare, but I don't have unlimited time to devote to this.
I know that a lot of people would be excited to get root on this device. I assure you sure you that it is possible. However, I don't want to start a thread with a solution that will force people to do a fresh install of Oreo and possibly lose data. And of course there's the problem with the OTA update which will brick the device. Of course everyone understands that they modify their device at their own risk, but I consider my root solution still a bit dirty and I was hoping at least to get it to accept OTA updates before I wrote up a root guide. I really think that if we could get a permanent bootloader unlock instead of a temporary unlock that we could get past this problem. And if somebody is out there that could make a TWRP image for this device, I think we would be golden as we could do a standard magisk root install via custom recovery.
Chaser
WARNING
ALl Data will be wiped , so backup all data in advance .
Phone must be charged above 60% .
You might loose warranty on unlocking bootloader .
Also neither I nor XDA will be responsible for any loss or damage that occurs to your device
OverviewUnlocking Bootloader is the first step to rooting your phone , unlocking new capabilities and instaling custom ROM , Kernel and Recovery but it has its own peril like loss of Widevine L1 certification , Safteynet failure and in extreme cases reduced camera capablities .
Requirements
A PC
Indian variant of Realme GT NEO 2 and USB type C cable
Device should be on RUI 2.0 based in Android 11 with Latest software update
Steps
Simply Install the
For RUI2(Android 11) DeepTestApkOld, For RUI3(Android 12) DeepTestApkNew
Open Deep Testing App , read and agree to TOS
Click on Apply Now button it will say Application Submitted please wait
After 10 minutes open Deep Testing App and go to Query Approval Status
Skip to step 8 if adb&fastboot already installed on systemNow hopefully it should say DeepTesting approved .
Install adb-fastboot setup (Windows only)
Go to C:\adb folder , press shift and right click open Powershell window here .
In deep testing app after selecting query approval status , tap on start deep testing button Now your phone will reboot to fastboot mode
Connect phone via USB to PC
And in the power shell window opened in step 7 enter fastboot devices then press enter key (It should show your device name , If it does not then reinstall drivers)
Now in powershell enter fastboot flashing unlock then press enter key
Your device will reboot and show warning use volume button to select Yes Unlock Bootloader
After this phone will reboot twice don't do anything and after 5 to 10 minutes your phone will restart with fresh installation , wisely read and agree to terms and complete the setup
Now your device bootloader is unlocked .
My suggestion would be to not root or unlock bootloader right now
Be patient and when it is clear what are the hidden disadvantages then you can decide If you should unlock bootloader or not
After Unlocking bootloader I have confirmed that
1) Widevine degraded to L3 ( no more HD videos on OTT apps) .However Indian devices don't loose L1 key
2) Front Camera is taking less detailed photo (and hanging in GCam , maybe GCam fault )
3) GPS is taking more time to get a fix
4) Charging speed is not affected .
Can u create a guide to flash stock rom once BL is unlocked
ultimatesprit said:
Can u create a guide to flash stock rom once BL is unlocked
Click to expand...
Click to collapse
Realme has not released relocking tool yet .
Once fastboot flashable file is available we should be able to relock bootloader
Email44841 said:
After Unlocking bootloader I have confirmed that
1) Widevine degraded to L1 ( no more HD videos on OTT apps) .
2) Front Camera is taking less detailed photo (and hanging in GCam , maybe GCam fault )
3) GPS is taking more time to get a fix
4) Charging speed is not affected .
Click to expand...
Click to collapse
anywork around for this issues?
ultimatesprit said:
anywork around for this issues?
Click to expand...
Click to collapse
CUSTOM ROMs might fix these issues .
ultimatesprit said:
Can u create a guide to flash stock rom once BL is unlocked
Click to expand...
Click to collapse
I will create it soon .
My suggestion, dont ubl yet. wait for a month [ just to be safe. ]
Latest update is A.06 yet I still can't apply for deep test
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is indian variant already on A.07 is there a A 07 update for neo 2?
Ggff5 said:
Latest update is A.06 yet I still can't apply for deep test View attachment 5526393
Click to expand...
Click to collapse
i think formatting your device might help, but please, wait till march, as proper development is soon to come.
KD6-3.7 said:
i think formatting your device might help, but please, wait till march, as proper development is soon to come.
Click to expand...
Click to collapse
Did someone tried format it ?
Ggff5 said:
Did someone tried format it ?
Click to expand...
Click to collapse
maybe, i think one did.
why not join telegram group and see for yourself?
KD6-3.7 said:
maybe, i think one did.
why not join telegram group and see for yourself?
Click to expand...
Click to collapse
I'm there but no one helping
Ggff5 said:
I'm there but no one helping
Click to expand...
Click to collapse
tag me - @obsidianmaximus
RMX3370 said:
After Unlocking bootloader I have confirmed that
1) Widevine degraded to L1 ( no more HD videos on OTT apps) .
2) Front Camera is taking less detailed photo (and hanging in GCam , maybe GCam fault )
3) GPS is taking more time to get a fix
4) Charging speed is not affected .
Click to expand...
Click to collapse
Do you mean L3 instead of L1? I believe, Neo 2 have L1 out from the box.
Alifirdaus said:
Do you mean L3 instead of L1? I believe, Neo 2 have L1 out from the box.
Click to expand...
Click to collapse
23409 id has L1. there is another id, it has l3 KeK
KD6-3.7 said:
23409 id has L1. there is another id, it has l3 KeK
Click to expand...
Click to collapse
oh no my netflix. By the way, I'm gonna try to change my region following the new guide here in the forum and will see how it will affect Widevine.
Alifirdaus said:
oh no my netflix. By the way, I'm gonna try to change my region following the new guide here in the forum and will see how it will affect Widevine.
Click to expand...
Click to collapse
good luck, hope it gets fixed.
whats ur widevine status atm though?