Database Info

Unlocking bootloader confusion (Infinite loop?)

I'm so confused, if I have android 6.0.1, and they made it so you can't unlock bootloader on this version, but you need bootloader to downgrade to Lollipop to be able to unlock bootloader, how does that work??? I'm just trying to root it, but to do that I need bootloader, so I need to know either how I unlock bootloader on 6.0.1 (MM) or how to downgrade to Lollipop without the bootloader. Please help this has been driving me literally insane for weeks.

XboxIssues said:
I'm so confused, if I have android 6.0.1, and they made it so you can't unlock bootloader on this version, but you need bootloader to downgrade to Lollipop to be able to unlock bootloader, how does that work??? I'm just trying to root it, but to do that I need bootloader, so I need to know either how I unlock bootloader on 6.0.1 (MM) or how to downgrade to Lollipop without the bootloader. Please help this has been driving me literally insane for weeks.
Click to expand...
Click to collapse
Use Panasonic eluga software to downgrade to 5.0.2....then unlock bootloader, install twrp and install marshmallow rom from the android development portion of the idol 3 forums. I recommend the marshmallow from @The Marionette.

famewolf said:
Use Panasonic eluga software to downgrade to 5.0.2....then unlock bootloader, install twrp and install marshmallow rom from the android development portion of the idol 3 forums. I recommend the marshmallow from @The Marionette.
Click to expand...
Click to collapse
So on AndroidMTK I found a ton of different softwares, I see one called "Parasonic Eluga Switch Stock Rom" and it says 5.0, I downloaded that, launched EB-90S55EWLv1009.exe, but when I try to downgrade my phone it gets stuck at 2% then gives me the error code in the picture below. I turn the phone off, then plug it in to my computer, then when it shows up I click download, am I doing something wrong? I have also tried manually putting it intodownload mode then clicking download but it still does the same thing. Do I have to change something in the settings? Help please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

As I've never used the Panasonic software myself and I use Linux, not windows I'm not the best person to assist. Hopefully someone else can. You can always re-run alcatel's mobile Q software (which I think requires you to be in download mode) to restore your device back to marshmallow stock. There have been some posts with instructions..you need to do some searches within the q&a and android development sections of idol3.

I have the same problem bro, but when i tried the 2 days ago it worked for me but i failed (the software stuck in 45-5X % and get an error, but no worry thats normal that would mean that worked perfectly), but the thing is that i unplugged the device before i had the error (we need to wait at least 20-30 min) and my device is now softbricked i guess, i tried again but i get the same error as you. Someone adviced me to try to use this software to go back to lolipop (without unblocked unlocker) so after i'll use Panasonic thing, i'll try after, there is the software : http://pic1.aotcloud.com/tclportal/20160315/06/33/48/Mobile_Upgrade_Q_5.0.0_Setup.exe (you need to power off the device before plugged it i guess)

famewolf said:
As I've never used the Panasonic software myself and I use Linux, not windows I'm not the best person to assist. Hopefully someone else can. You can always re-run alcatel's mobile Q software (which I think requires you to be in download mode) to restore your device back to marshmallow stock. There have been some posts with instructions..you need to do some searches within the q&a and android development sections of idol3.
Click to expand...
Click to collapse
I'm new to this site and don't know how to do anything or where anything is, I'm really looking for just a straight forward answer lol. When I rooted devices in the past all I had to do was use kingoroot.

Issou said:
I have the same problem bro, but when i tried the 2 days ago it worked for me but i failed (the software stuck in 45-5X % and get an error, but no worry thats normal that would mean that worked perfectly), but the thing is that i unplugged the device before i had the error (we need to wait at least 20-30 min) and my device is now softbricked i guess, i tried again but i get the same error as you. Someone adviced me to try to use this software to go back to lolipop (without unblocked unlocker) so after i'll use Panasonic thing, i'll try after, there is the software : http://pic1.aotcloud.com/tclportal/20160315/06/33/48/Mobile_Upgrade_Q_5.0.0_Setup.exe (you need to power off the device before plugged it i guess)
Click to expand...
Click to collapse
With that program it again failed at 2% at ~3 minutes

1- install Mobile upgrade Q 5.0.6 (can be found on my g drive)
2-install the drivers inside the mobile upgrade q folder
3-reboot computer
4-turn the phone off
5-launch the mobile upgrade q 5.0.6
6-click on the "upgrade phone" icon
7-connect the phone to the computer (best with the original alcatel cable)
8-should be sucessfull
or do the same with "panasonic eluga switch EB-90S55EWLv1009.exe," instead of Mobile upgrade Q.

It didn't worked for me, i guess my friend phone is hardbricked ...

Have to see how the device is shown on windows when connected..
Odesláno z mého 6045Y pomocí Tapatalk

I don't care thats not my problem anymore, but thanks anyway

DallasCZ said:
Have to see how the device is shown on windows when connected..
Odesláno z mého 6045Y pomocí Tapatalk
Click to expand...
Click to collapse
It does the same thing for me still :/

DallasCZ said:
1- install Mobile upgrade Q 5.0.6 (can be found on my g drive)
2-install the drivers inside the mobile upgrade q folder
3-reboot computer
4-turn the phone off
5-launch the mobile upgrade q 5.0.6
6-click on the "upgrade phone" icon
7-connect the phone to the computer (best with the original alcatel cable)
8-should be sucessfull
or do the same with "panasonic eluga switch EB-90S55EWLv1009.exe," instead of Mobile upgrade Q.
Click to expand...
Click to collapse
It still does the exact same thing, goes to 2% then says the same error as above.

Many people are getting 601->502 using mobile upgrade q or panasonic eluga switch app, so then you do something wrong, because as you posted the mobile upgrade q screen (the one with the red error message) it tells you that you are not in download mode, so you either:
-conected the device before you launch the upgrade process
-your device is not turned off
-your drivers are not installed.
If all above is not right, then you have to stick with the 6.0.1 and wait for root method.

I have news : the idol 3 is know shown as RELINK HS-USB QDLoader 9008

Issou said:
I have news : the idol 3 is know shown as RELINK HS-USB QDLoader 9008
Click to expand...
Click to collapse
http://forum.xda-developers.com/ido...n-infinite-t3426810/post67941146#post67941146
if this dont work, then its most probably hardbricked so send it to warranty repair..they will exchange the motherboard (as they did on my device)

DallasCZ said:
http://forum.xda-developers.com/ido...n-infinite-t3426810/post67941146#post67941146
if this dont work, then its most probably hardbricked so send it to warranty repair..they will exchange the motherboard (as they did on my device)
Click to expand...
Click to collapse
How much it cost ?

Nothing its warranty repair..
Odesláno z mého 6045Y pomocí Tapatalk

Ah yeah i forgot. But anyway thanks for the help, you and Alex

Issou said:
Ah yeah i forgot. But anyway thanks for the help, you and Alex
Click to expand...
Click to collapse
This tool should help you all !!! https://yadi.sk/d/pIcZOidhtrYFc

Huawei MediaPad M3 Lite 10 Custom ROM and Custom Recovery [TWRP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
This thread is for the MediaPad M3 Lite 10 LTE - Tablet from Huawei.
In my case, I´m looking for a C-ROM and C-Recov (e.a. RR, Mokee, TWRP) for the
Huawei MediaPad M3 Lite 10 LTE (BAH-L09) with Android 7.0 and EMUI 5.1
Since it´s quite new on the market it´s atm hard to find anything bout a C-ROM or even a C-recovery.
discoveries
advises
questions
tipps / tricks
productive discussions
solutions
are much appreciated.
Detailed device Informations:
​
​

Nobody knows any thread about this tablet??

Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.

essayn said:
Still searching for a root-solution.
So it's possible to read out the firmware with Infinity Box CM2 but haven't found a working "Non-dongle"-version (Loader).
Some days, there will be a root solution.
It just takes time and will be posted in here.
Click to expand...
Click to collapse
If you need some help and i can do something, tell me

skymota said:
If you need some help and i can do something, tell me
Click to expand...
Click to collapse
I much appreciate the offer but what could u do if u haven´t the device or do u own it ?
Since my CM2-Infinity-box doesn´t work (usually I work with Miracle Box but it´s not compatible ...well the Tablet has to be rooted to read the firmware..), and literally tried all rooting-apps and progs, this device is really stubborn!

I own this device, thats what i told you

skymota said:
I own this device, thats what i told you
Click to expand...
Click to collapse
Very well. ?
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?

essayn said:
Very well.
Actually, just the stock-recovery is needed to finally start to compile it. Have u been able to extract the recovery or maybe the whole ROM ? ?
Click to expand...
Click to collapse
search and read a lot about this but i cant...

skymota said:
search and read a lot about this but i cant...
Click to expand...
Click to collapse
Well, to bad but I guessed so, since this device is atm not rootable. :/
I tried every single Flash-Box like MB, Infinity, Aladdin, Falcon etc pp.. any Rooting-App (APK & PC- based), almost a dozen flash-tools like ADT, AOS-flasher, Ultimate Backup-tool etc...and several command prompts via ADB&Fastboot.
Really Nothing helped to get a nandroid- or even a dumb ROM. From which I could extract the stock recovery.
Nevermind, I will try alil more with Holo- & Heliumbackup, which surely wont work but who knows, rite ??
I'm patient and as soon as I've found a solution I'll share it here immediately.
As any other user is welcome to do so, too.

I´ve managed to extract the stock-recovery via an OTA-update which came from Firmware Finder from Team MT.
U ´ll find the recovery on G-Drive. The "oldRECOVERY.img" is the extracted stock-recovery from the original BAH-L09C100B018 firmware!
So, since I´ve updated the Tablet, the only "RECOVERY.img"-named file is from the newest firmware which is L09C100B021!
If u wanna update to ...021, via the Firmware Finder-App, u need
The App
Time
Be aside your tablet
and watch this video before u start
May read this thread aswell
​

I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?

jenkins-1984 said:
I bought the BAH-W09 model last week, anyone here unlocked bootloader on the lite 10 yet?
Click to expand...
Click to collapse
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456 <- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".

essayn said:
Yup, unlocked the BL from day 1. It´s the same procedure for all HUAWEI devices.
Just go here, login or register, confirm the unlocking agreement and put all device infos into the blank fields.
U´ll immediatley get an unlock code, which u have to enter via fastboot command prompts (recommended):
fastboot devices
fastboot oem unlock-go 1234567890123456<- (this number is an example, u´ll have to put ur code there instead)
fastboot reboot
From now on an unlocked bootloader message will appear every time u start ur device. Just press power shortly to boot then. (It´s also written in the text aswell)
P.S.
Before u try to unlock: Don´t forget to enable USB-debugging in the Engineertool (tap 7 times on "build" in the settings-menue) and "allow OEM unlocking".
Click to expand...
Click to collapse
Ok cheers, I looked on the emui site and was nothing under their tablet menu only phones on the unlock bootloader page, on Nexus you just enable usb-debugging and click the OEM unlock in settings and fastboot flashing unlock in terminal. Sony uses a custom tool and HTC via their website I had a few phones in the past and built roms etc this my first Huawei device apart from my Nexus 6p Huawei help build with Google. I take it this device no official forum atm only the Kirin version.

Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.

essayn said:
Ya, HUAWEI has a quite faire unlock policy.
Important: There's an unlock bug sometimes. Be sure to have the Original firmware on ur device. (No updated ROM)
Have fun.
Click to expand...
Click to collapse
It's on latest official that came with device, I take it there is no twrp or anything out for this device ATM?

Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com

essayn said:
Just check a view posts above. I've described how to get the newest FW.
So if the factory ROM-version is installed, unlock the BL and after then update ur ROM. Jfi.
BTW_
Atm there's no custom recovery available for the M3 Lite Versions. U have to compile it by urself or make a request on Hovatek.com
Click to expand...
Click to collapse
I'm not bothered about updating the firmware ATM more so custom recovery but will look into it after my holiday.

I have requested official forum for this device and looks to be accepted so hopefully get some development going for this device soon...

There seems to be no way to retrieve the unlock code for Wifi-only tablets from the official Huawei site, as it demands the IMEI which is obviously missing.
I have contacted Huawei support with the product ID and serial number of my M3 Lite 10. One day later I have received the unlock code. I think that having been polite has helped
.

Storage question
Hello,
First of all: sorry, if the question is 'noobish', but as a matter of fact I am noob as far as android is concerned
I just bought this tablet for my son (LTE version), and I was quite surprised to find out that I can't move the installed applications to SD card.
Are there any hints and tips on how to take advantage of the big SD card, so my son's game data would not have to be stored in the internal memory?
The only default option is to change the memory from internal to SD, after the tablet restarts. But I assume it uses then only the SD card, and I am looking for a solution I remember from Samsung phone, where I could choose certain apps to move from internal memory to SD.
Another question, just by the way, is following: when I install an apk file from the SD card, during the installation process every few seconds I get a pop-up saying the application is not responding (although the installation is in progress). Any way to disable those annoying pop-ups?
I'd appreciate any feedback

LG velvet Retail Mode Thread

I am able to disable retail mode with root junkys guide. Ill post it below. Credit goes to root junky for the disabling retail mode guide. I am currently trying to flash another software KDZ on a retail mode LG Velvet 5G. I run into this error in LGUP. I am using a modified LGup file. has anyone been able to wipe these phones. i saw another xda member claim that the LG wing will flash in LGUP but I cannot figure it out. i tried all options in LGUP. Any IDeas?
click on the retail mode app and put in the password
password 103729
click on factory data reset in the app and put in admin code
Admin L310MC570G
wait for the device to fully factory reset. Once it boots up quickly go into setting about phone and click on the build number 7 times then go into developer options.
open a adb windows on your pc and start adb server with with adb devices.
then toggle usb debugging and click always allow.
disable device admin
adb shell
am start -S com.android.settings/.Settings\$DeviceAdminSettingsActivity
uncheck retail mode admin and deactivate it.
reboot from the shell with reboot.
Uninstall retail mode app
adb shell
pm uninstall -k --user 0 com.lge.retailmode
reboot from the shell with reboot.
Demo mode locks removed
Hope this helps those out there that needed it. The battery will still only charge to 50% but everything else will work as far as i can tell so far.
Rootjunky Out.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So the model number of the device that you have is G902V?

iBowToAndroid said:
So the model number of the device that you have is G902V?
Click to expand...
Click to collapse
yeah thats what it shows up as. G902v10h

I did it with LG velvet 5g live demo unit bought from ebay using LG Flash Tool 2018 I just flashed the Korina rom android 11 and everything works even 5g only fingerprint not working

kamalsahhar123456 said:
I did it with LG velvet 5g live demo unit bought from ebay using LG Flash Tool 2018 I just flashed the Korina rom android 11 and everything works even 5g only fingerprint not working
Click to expand...
Click to collapse
You mean the Korean rom?

LGUPED said:
You mean the Korean rom?
Click to expand...
Click to collapse
Yes sorry

53.9 MB folder on MEGA
20 files and 7 subfolders
mega.nz
Here is the files I used every thing is working only faceunlock and fingers print not working
And some times the play store crashed

kamalsahhar123456 said:
53.9 MB folder on MEGA
20 files and 7 subfolders
mega.nz
Here is the files I used every thing is working only faceunlock and fingers print not working
And some times the play store crashedView attachment 5395825
Click to expand...
Click to collapse
thanks. I am still trying to get lg flash tool to see the phone and say ready. Not sure what I am missing. will work on it again later.

kamalsahhar123456 said:
53.9 MB folder on MEGA
20 files and 7 subfolders
mega.nz
Here is the files I used every thing is working only faceunlock and fingers print not working
And some times the play store crashedView attachment 5395825
Click to expand...
Click to collapse
quick update i mange to fix fingerprint using this fix
[HELP] Fingerprint not working Root/Unlocked LG Velvet 4G
Root/Unlocked LG Velvet 4G fingerprint sensor not working cannot setup fingerprint HELP!
forum.xda-developers.com

kamalsahhar123456 said:
quick update i mange to fix fingerprint using this fix
[HELP] Fingerprint not working Root/Unlocked LG Velvet 4G
Root/Unlocked LG Velvet 4G fingerprint sensor not working cannot setup fingerprint HELP!
forum.xda-developers.com
Click to expand...
Click to collapse
I am going to work on this again tonight. Did you ever wok on the v60?

LGUPED said:
I am going to work on this again tonight. Did you ever wok on the v60?
Click to expand...
Click to collapse
not yet

Hello guys! Need some help, to flash this handset, if it posible. Some russian words i think not a problem?) I try to flash by LGUp but something went wrong. Or Im doing wrong. Can you please give me advice?

0FIMA0 said:
Hello guys! Need some help, to flash this handset, if it posible. Some russian words i think not a problem?) I try to flash by LGUp but something went wrong. Or Im doing wrong. Can you please give me advice?
Click to expand...
Click to collapse
Yes i was able to flash the lh velvet retail mode with stock korean firmware. Works great on att with 5g.
I can do my best to help out. Whats up? Where are you stuck?

Stuck with error about dll. Tried to flash by Uppercut.Maybe some mistakes with LGUP....dll?

0FIMA0 said:
Stuck with error about dll. Tried to flash by Uppercut.Maybe some mistakes with LGUP....dll?
Click to expand...
Click to collapse
I was never able to get the Gui tool to work. Flash firmware in command prompt and you will be set.

Can you please tell me it like a guide? Or in a specific sequence, what and how I must do it. I think all my mistake is a using wrong.dll

How did you get a network signal without imei?

LGUPED said:
I was never able to get the Gui tool to work. Flash firmware in command prompt and you will be set.
Click to expand...
Click to collapse
How did you get a network signal without imei?

Question how to downgrade sm-a12/5u from sw_rev3 to sw_rev1

i want to install a custom gsi, but it keeps bootlooping. wanted to install buf9 firmware but i cant bc its on sw_rev3 so it doesnt work. any suggestions?

tekkitheidiot said:
i want to install a custom gsi, but it keeps bootlooping. wanted to install buf9 firmware but i cant bc its on sw_rev3 so it doesnt work. any suggestions?
Click to expand...
Click to collapse
You can't downgrade once you've upgraded

wouldnt there be a way through twrp or brom mode?

tekkitheidiot said:
wouldnt there be a way through twrp or brom mode?
Click to expand...
Click to collapse
Nope you can try brom mode but i dont trust if works
If you buy a samsung device depending of the device (like this A12 and the MTK imei bug) is not a good idea to upgrade

tekkitheidiot said:
wouldnt there be a way through twrp or brom mode?
Click to expand...
Click to collapse
That's samsung for you, once you've upgraded Binary version there's no going back.
As for the brom mode, samsung has locked their phones out of that mode. I don't know if accessing it through access points works but you could try to see if it can help

I tryed to downgrade via TWRP flashing baseband and BL
Now my A12 is DEAD and i dont had a box to repair it (after flash i see the security error screen and flashed again the Binary 3 BL once odin tell me passed the phone doesn't booted again)
I just wanted to get the imei working because the firmware on the binary 3 (11 and 12) android system uses all my ram memory trying to get the signal working
F*** *** Samsung and mediatek next time i bought an exynos or qualcomm variant

tekkitheidiot said:
i want to install a custom gsi, but it keeps bootlooping. wanted to install buf9 firmware but i cant bc its on sw_rev3 so it doesnt work. any suggestions?
Click to expand...
Click to collapse
The last rom that i used on my A12 was pixel experience and worked perfectly on binary 3 android 11 based firmare (A125MUBUS3BVF1) just installed TWRP with nulled vbmeta flashed the image as system (not as super) and wiped the data (not advanced wipe) rebooted and the gsi was booted (only bugs mentionated on the thread and the touch bug)

Allehandro said:
That's samsung for you, once you've upgraded Binary version there's no going back.
As for the brom mode, samsung has locked their phones out of that mode. I don't know if accessing it through access points works but you could try to see if it can help
Click to expand...
Click to collapse
i can access brom mode if that helps

tekkitheidiot said:
i can access brom mode if that helps
Click to expand...
Click to collapse
How'd you do it?
Technically since I've always known that I can't access brom on my samsung I've never tried to understand what you can do with it.

Allehandro said:
How'd you do it?
Technically since I've always known that I can't access brom on my samsung I've never tried to understand what you can do with it.
Click to expand...
Click to collapse
i downgraded to the earliest binary 3, then used test points. worked perfectly

tekkitheidiot said:
i downgraded to the earliest binary 3, then used test points. worked perfectly
Click to expand...
Click to collapse
I was only planning yo use the brom mode to use the MTK META Utility which is developed by Mediatek themselves for fixing imei to see if I can fix the imei issue with it but I couldn't enter brom mode and I'm afraid of opening the back cover

Allehandro said:
I was only planning yo use the brom mode to use the MTK META Utility which is developed by Mediatek themselves for fixing imei to see if I can fix the imei issue with it but I couldn't enter brom mode and I'm afraid of opening the back cover
Click to expand...
Click to collapse
its relatively easy tbh. just be careful around the volume buttons, but everything else is okay. there arent too many cables to rip

Allehandro said:
I was only planning yo use the brom mode to use the MTK META Utility which is developed by Mediatek themselves for fixing imei to see if I can fix the imei issue with it but I couldn't enter brom mode and I'm afraid of opening the back cover
Click to expand...
Click to collapse
Its easy to open but be careful with the power/fingerprint sensor flex i think the testpoint is near of the charger flex in the mainboard (i see youtube tutorials to access to Brom mode and preloader)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello,
If you're going to be performing a downgrade, you'll have to have the SCATTAR firmware with all of the old loaded certificates and tokens. Flash is going to be performed via BROOM (fused ROM code) useing SP_FLASH_TOOL.
Regarding the IMEI issue, that I'm not able to help with. And it is pain to work with, maybe you the MODEM file could help bout dbout it. You might have to go diging through firmware sites.
Thats it.
Stay safe,
Krypton.

LAST_krypton said:
Hello,
If you're going to be performing a downgrade, you'll have to have the SCATTAR firmware with all of the old loaded certificates and tokens. Flash is going to be performed via BROOM (fused ROM code) useing SP_FLASH_TOOL.
Regarding the IMEI issue, that I'm not able to help with. And it is pain to work with, maybe you the MODEM file could help bout dbout it. You might have to go diging through firmware sites.
Thats it.
Stay safe,
Krypton.
Click to expand...
Click to collapse
where would i find this scattar firmware?

tekkitheidiot said:
where would i find this scattar firmware?
Click to expand...
Click to collapse
SM-A125U Multitool Kit (Root/TWRP/Unlock/Unbrick)
Here is a toolkit of several tools ive collected and put together for the A12 in a single pack to help see through all the clutter and chaos of this forum, i have an A125U (converterd to a-125w) so thats all i can confirm working 100% but im 99%...
forum.xda-developers.com
Maybe this can help you only you need to download a firmware (don't try to flash a binary 2 or binary 1 firmware if you do that you phone will get a hardbrick and the sp flashtool will give the 0xC0020029 or the anti roolback error)
Pd: dont forget to change the date to 25/05/2022 to get the mtkmetatool working

MauriJ2001 said:
SM-A125U Multitool Kit (Root/TWRP/Unlock/Unbrick)
Here is a toolkit of several tools ive collected and put together for the A12 in a single pack to help see through all the clutter and chaos of this forum, i have an A125U (converterd to a-125w) so thats all i can confirm working 100% but im 99%...
forum.xda-developers.com
Maybe this can help you only you need to download a firmware (don't try to flash a binary 2 or binary 1 firmware if you do that you phone will get a hardbrick and the sp flashtool will give the 0xC0020029 or the anti roolback error)
Pd: dont forget to change the date to 25/05/2022 to get the mtkmetatool working
Click to expand...
Click to collapse
ill look through it. thanks

tekkitheidiot said:
where would i find this scattar firmware?
Click to expand...
Click to collapse
You generate it your self

To unlock bootloader on these the easiest way is to convert it to an a125w xac by flashing the a125w bl files. Unlock bootloader with seccfg. Then flash ap, cp, and csc from a125w with odin and when it boots up it should show as a125w. Also in download mode it shows the same. My imei says unknown but i believe thats caused by unlocking bootloader so if you relock it after converting it should go back to normal. Playing with mtk modem tool to rewrite imei. Tried using xposed imei changer but didnt seem effective.

Untouched Poco F2 Pro (SJKEUXM) Unknown baseband after latest update (13.0.8.0 SJKEUXM)

Hello,
I dunno if this thread is still active but I have the EU variant Poco F2 Pro and this has been untouched since 2020(no I regret not unlocking the bootloader). And just last week, (I think) after receiving the latest patch update, I suddenly lost my baseband. Hence I now have no signal. I have raken my ohone to a technician for consultation and checkup and he was the one who noticed the "unknown baseband", Suffice to say my IMEI is also gone. He told me that rhe only way to solve this is to reflash OS. Unfortunately, my bootloader is still locked because I said this is still untouched (I regret it now).
So I did some research and came across this DFT Pro Tool for mobile maintenance which works on multiple brands and claims it can fix the IMEI/baseband issue even with bootloader locked. PROBLEM IS, you have to buy it for $70 and for something you'll gonna be using just once, that is a huge sum.
Now I have sent Fredback to Poco about this and requested for a rollback update (idk if they reply to such cases) just to see if the current update is the issue. I have also tried redownloading and reflashing the full latest firmware via the update menu but it did not solve anything.
The last thing on my mind is to reflash an older version (maybe 13.0.5.0, 4.0, or 3.0) via recovery but I know xiaomi and Poco implemented an anti rollback feature (which I now think is kinda selfish and stupid of them).
I also have this crazy idea of extracting the baseband zip from a previous version of the rom, renaming it 'update.zip" and flashing but I doubt that it's as simple as that.
Anyone encountered a similar issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ichigo_kurosaki said:
Hello,
I dunno if this thread is still active but I have the EU variant Poco F2 Pro and this has been untouched since 2020(no I regret not unlocking the bootloader). And just last week, (I think) after receiving the latest patch update, I suddenly lost my baseband. Hence I now have no signal. I have raken my ohone to a technician for consultation and checkup and he was the one who noticed the "unknown baseband", Suffice to say my IMEI is also gone. He told me that rhe only way to solve this is to reflash OS. Unfortunately, my bootloader is still locked because I said this is still untouched (I regret it now).
Click to expand...
Click to collapse
V13.0.8.0.SJKEUXM is a stable beta, and yes Xiaomi is updating with Beta versions on the stable channel and this is nothing new, many like you have found themselves with bricked phones.
At first tried with https://www.xiaomitool.com/V2/ if no result reposted.

Will it work even with locked bootloader? Thanks for the reply anyway.

ichigo_kurosaki said:
Will it work even with locked bootloader? Thanks for the reply anyway.
Click to expand...
Click to collapse
First try to reinstall the same version with the OTA.

NOSS8 said:
First try to reinstall the same version with the OTA.
Click to expand...
Click to collapse
Already did that. Tried the ota and the full rom (download full package).

ichigo_kurosaki said:
Already did that. Tried the ota and the full rom (download full package).
Click to expand...
Click to collapse
So;use https://www.xiaomitool.com/V2/,select bricked device.(Not 100% guaranteed that it will work)

NOSS8 said:
So;use https://www.xiaomitool.com/V2/,select bricked device.(Not 100% guaranteed that it will work)
Click to expand...
Click to collapse
Yes you are right. This method is not guaranteed. I tried to trick the tool into thinking my Poco F2 Pro was bricked. I got as far as to the firmware selwction for my device (there was IMI and IMI-new) but I thinkini represents redmi k30 pro because when i tried to proceed it was searching for china rom (when in fact I have F2 eu variant). Idk what imi new is. Maybe that is my device/global and eu f2. But when i tried to proceed i get this error i was lucky to cime uo upon doing google search.

Try with the same rom or update.
This tool is able to detect the rom.

NOSS8 said:
Try with the same rom or update.
This tool is able to detect the rom.
Click to expand...
Click to collapse
So i gotta use "my device is working" then "i want to mod ot" then select my rom file?

ichigo_kurosaki said:
So i gotta use "my device is working" then "i want to mod ot" then select my rom file?
Click to expand...
Click to collapse
try what is possible.

NOSS8 said:
try what is possible.
Click to expand...
Click to collapse
Almost succeeded. Lol. I went in to Mi Assistant in recovery so just to make the device appear in pcsuite mode. All was qell .a rom was found for my device. Almost done flashing then $hit happens and i was booted back (thankfully) to my current system.

NOSS8 said:
try what is possible.
Click to expand...
Click to collapse
Almost succeeded. Lol. I went in to Mi Assistant in recovery so just to make the device appear in pcsuite mode. All was qell .a rom was found for my device. Almost done flashing then $hit happens and i was booted back (thankfully) to my current

Hi, i have the global version (POCO F2 PRO) in the last month i had this problem. I dont know the reason, never did something whith software , only one day the phone freezen and when i do the reboot los this information. You have good news?? pd: sorry for my english no is my principal lenguage

Hello..
Please any solution yet? I also have Poco f2 pro global with same issue (bootloader is locked).. and currently the phone is not recognised by any pc(only charging) all settings are okay. The phone is not even reading USB otg flash storage again.