Nokia 6 official Firmware MENA Region [ Links updated with Flash tool] - Nokia 6 Guides, News, & Discussion

Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
Download link
Nokia 3 Firmware :- https://mega.nz/#!RAlVHJJC!9o0Ntn0GGiPuWB1-GQw2kP3dYwGw3jIcQJ_f-V1eJGc
Nokia 5 Firmware :- https://mega.nz/#!Qd0GwLYa!lQ4owEX37KMAEg_4M5OMnROMU3nuih1T0iPiaFpv6_E
Nokia 6 Fimrware :- https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
New Link for all Upcoming firmware's
https://drive.google.com/drive/folders/1t64iHuQQjmMnzcujZtjYplh6ipbiF6Cw?usp=sharing
OST tool & patch
Download OST LA v6.0.4:- https://yadi.sk/d/hkDVImee3NAZ7a
Download patch :- https://yadi.sk/d/Tm2MvTJs3NAZy2
password for patch :- 123
Many thanks to @Quixote78 for the OST Tool patch and the instructions ( which is posted in Nokia 6 forum)
Instructions
1. Download original firmware from the above link
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password :- 123)
6. Replace . exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 )
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. Your device will reboot and you may congratulate oneself.
Firmware supported for below Nokia 3 Supported Models
NOKIA 3 TA-1032 DS
NOKIA 3 TA-1020 SS
NOKIA 3 TA-1028 SS
NOKIA 3 TA-1038 DS
Firmware supported for below Nokia 5 Supported Models
NOKIA 5 TA-1053 DS 16GB+2GB
NOKIA 5 TA-1024 SS 16GB+2GB
NOKIA 5 TA-1044 DS 16GB+2GB
NOKIA 5 TA-1027 SS 16GB+2GB

blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
Click to expand...
Click to collapse
thanks very much:good:

oh,bad,my phone can not boot.

18227077056 said:
oh,bad,my phone can not boot.
Click to expand...
Click to collapse
You cannot flash the firmware . Let some Devs help out to extract the firmware from that package . If your device is not booting pls visit nearest SC to get it repaired . They won't charge u

nokia 6 ta-1000
hi,my mobile stucked at recovery mode.can i use it to get my mobile to normal state.

Try flashing the ROM with this tool
https://androidmtk.com/use-sut-l3-tool

WisMartins said:
Try flashing the ROM with this tool
https://androidmtk.com/use-sut-l3-tool
Click to expand...
Click to collapse
So great to list that here . Have you tried and being successful . If so I can provide all Nokia models firmware 3 , 5 ,6 and 8 too

blackpanther0582 said:
So great to list that here . Have you tried and being successful . If so I can provide all Nokia models firmware 3 , 5 ,6 and 8 too[/QUOTE
That any one can tell me why SUT always say that the program is outdate?
Click to expand...
Click to collapse

blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
If you have the tool you should share it so people can patch it
Sent from my FRD-L09 using Tapatalk

LastStandingDroid said:
If you have the tool you should share it so people can patch it
Click to expand...
Click to collapse
Sure if it can be patched anyways I will share the ost tool tomorrow once I reach office

blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
Click to expand...
Click to collapse
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.

harisn said:
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.
Click to expand...
Click to collapse
Please....any tools for flash it? Or only in a dream

T3DS said:
Please....any tools for flash it? Or only in a dream
Click to expand...
Click to collapse
Please check the op I have updated the tool link . If someone can patch it to get it working :laugh:

harisn said:
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.
Click to expand...
Click to collapse
I've been able to extract all of the Nokia 6 files. I have a TA-1025, so this will be no use for me I'm assuming. Would anyone be interested if I send the unpacked files?

Ok so interesting turn of events....
So I downloaded SUT L1, the same link that was posted earlier in the thread to see if I got the same error about the program being out of date for the firmware. Sure enough....
I got the same error.
So I started looking at the files for the SUT L1 program and the program op first uploaded for flashing firmware and I started noticing a lot of the files looked.... really familiar. They couldn't be the same, could they? There was only a couple of files that weren't the same, the biggest outlier being an exe called SoftwareUpdateTool in the SUT L1 program files. Surely it's not as easy as dragging the exe from one folder to the next ri-?
Yes, yes it is that easy. Can anyone confirm this does anything?
h t t p s://drive.google.com/file/d/0B60NFIDB93wudDNXaG5vMkEyWVE/view?usp=sharing
(xda won't let me post links since I haven't had 10 posts)

Sorry for the back to back posts, but I've uploaded the unpacked Nokia 6 MENA firmware. xda isn't going to let me post a proper link again, so I'll split it up like last time. Hope this helps!
h ttps://drive.google.com/file/d/0B60NFIDB93wuX192Ym1aS19nWFk/view?usp=sharing

tertty said:
Sorry for the back to back posts, but I've uploaded the unpacked Nokia 6 MENA firmware. xda isn't going to let me post a proper link again, so I'll split it up like last time. Hope this helps!
h ttps://drive.google.com/file/d/0B60NFIDB93wuX192Ym1aS19nWFk/view?usp=sharing
Click to expand...
Click to collapse
So simply what does it mean . You mean that the OST tool provided is outdated one ?? Sorry I didn't get your point .

blackpanther0582 said:
So simply what does it mean . You mean that the OST tool provided is outdated one ?? Sorry I didn't get your point .
Click to expand...
Click to collapse
The OST I provided a link for is the most current, up to date flasher for the Nokia 6.
The software op provided was prompting for a network login when started. When the SUT L1 program was linked and suggested I noticed that the two programs (the software provided by op, and SUT L1 provided by another user) are very alike if not the same program. I simply took the launcher from SUT L1, that did not prompt for a network login, and copied it over to the program op provided. It now works and hopefully you can flash .nb0 files through it, though with the current files given I do not have the correct hardware to flash it to and I don't want to risk it! The program I linked is a Nokia 6 firmware flasher that I believe works.
Sorry for the confusion

tertty said:
The OST I provided a link for is the most current, up to date flasher for the Nokia 6.
The software op provided was prompting for a network login when started. When the SUT L1 program was linked and suggested I noticed that the two programs (the software provided by op, and SUT L1 provided by another user) are very alike if not the same program. I simply took the launcher from SUT L1, that did not prompt for a network login, and copied it over to the program op provided. It now works and hopefully you can flash .nb0 files through it, though with the current files given I do not have the correct hardware to flash it to and I don't want to risk it! The program I linked is a Nokia 6 firmware flasher that I believe works.
Sorry for the confusion
Click to expand...
Click to collapse
Yes mate what you told is exactly right the one i provided need a network login to HMD global server for key auth . Once verified only we can flash the firmwares . I uploaded it hoping someone can patch it to get it working without network login . The SUT L1 looks similar to the OST in some ways but I don't know whether they are the same. And at last only way we need is a successful firmware flash regardless of which tool we use . I can only help nyou guys with all official firmware supports for whichever model Nokia release

blackpanther0582 said:
Yes mate what you told is exactly right the one i provided need a network login to HMD global server for key auth . Once verified only we can flash the firmwares . I uploaded it hoping someone can patch it to get it working without network login . The SUT L1 looks similar to the OST in some ways but I don't know whether they are the same. And at last only way we need is a successful firmware flash regardless of which tool we use . I can only help nyou guys with all official firmware supports for whichever model Nokia release
Click to expand...
Click to collapse
Could you provide me with the Nokia 6 TA-1025 firmware?

Related

[Stock] [ROM] Karbonn Titanium S5 plus / S5+

Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
I have followed your instructions to the word. The YGDP download program keeps getting stuck after pressing 'Apply' after selecting the CPB file and version.
Moreover, the drivers that you have given are ADB drivers. I have installed them prior to all this. But my s5+ still doesn't get detected after I connect it to my PC without the battery. It says the driver installation failed. I forgot what was the device name that was being shown.
Could you please help me out. I have accidentally deleted certain system applications and need to get them back. Thanks.
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
dogmatism said:
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
Click to expand...
Click to collapse
thanks. will try that. But apart from that the flashing program has an issue as well. I'm running it on a 64 bit win 7 machine and I'm opening it with admin rights as well. also I need to open it in compatibility mode for windows XP. after hitting apply on the ROM selection screen it freezes. I guess that has nothing to do with the drivers as the phone isn't even connected yet.
any idea what's causing this?
Thanks for such an informative tutorial. I have this phone. From where can I download Custom ROMs like Cyanogenmod for it? Btw, are you getting poor camera quality by any chance?
Hats off sir
Thanks Sir Thank You Very Very Much You Save My Money! Thanks sir thank you!
ROM
when will we get kitkat ROM for titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
hello frnd i have spice coolpad 2 mi 496 model. the ygdp software is compatible with this device. my question is only that if my device will brick in future than can i fix it with this software i have both ygdp software as well stock rom of my device in cpb plz tell me
karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...:crying:
Help !!! Boot problem of karbonn titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
This is what happened.....
I um... somehow changed the fonts of my android system to segoe ui through rom toolkit lite... rebooted it.......
now, i'm only able to boot into recovery..... i.e. when i try to boot normally, it just shows the loading screen forever..
i have android system recovery 3e in my karbonn titanium s5 plus...
tried the above method........... but no use.... it kept showing some checksum error.....
i cant use adb too except for adb sideload.... which i cant as i have damn less internal memory free space
what do i do ?
p.s send any solution to this to my email :
[email protected]
ps. if possible, could you send me some roms and recoveries compatible with this phone ??? (Karbonn Titanium S5 Plus)
i searched the internet and found nothing.... if anybody happens to stumble over something for this, please send it to me. thanks in advance.
Unhappy karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...
Click to expand...
Click to collapse
check for your device model from coolpad and download the rom from coolpad romer accordingly...
check for the roms from coolpad romer in google drive
edit 2:
thanks to Mr Shrikar Galgali who sent me the rom from coolpad romer
use this link for the original rom ....
https://tr.im/20c3b
he also sent me a few other ROMs..
Here are links for ROMs compatible with karbonn titanium s5 plus :
Sony xperia z:
https://www.dropbox.com/s/e8sq7s60de82mvl/Xperia_Z_Karbonn_S5_Plus.zip
Sony xperia z v2:
https://tr.im/ca47d
Miui :
http://www.needrom.com/wp-content/uploads/2014/03/miui_7295c_4.3.7_2c5837e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
Note : The above posted links for roms are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Eg: You need to log in to your google account to download the Samsung Galaxy S5 ROM and the Xperia Z v2 ROM
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
edit 3:
Yep. My phone is fixed....
Had to go to the service center though....
anyway.....
For all those who damaged their System UI:
Here are the SystemUI.apk and the SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyuba/Karbonn_Titanium_S5_Plus_Syste.html
Hope it helps !
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
Here is the cwmrecovery.img file of karbonn titanium s5 plus, for all those who might need it.
tr.im/RWOT
( beware, the above link is not tried and tested ! )
hope it helps !
edit 4:
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive... I shall be uploading the MIUI v5 ROM to Google Drive within the next few weeks...
karbonn titanium x
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
uinod3 said:
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
Click to expand...
Click to collapse
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
i guess so...
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
well, if you have any custom recovery images, you could do it through fastboot ( fastboot flash recovery nameofrecovery.img )
else, if you have flashable recovery zip files, you could do it through adb sideload in recovery...
try twrp recovery... touch based recoveries are good for karbonn devices
take a backup of your current rom ( and recovery if possible ) first...
make sure that you know any karbonn service centre near you who can fix your phone if it gets bricked.
( i'm telling you so because when my karbonn titanium s5 plus bricked, it took a week and a half to get the phone serviced at the service centre. )
find some roms compatible with your device, and make sure you dont install new fonts or anything like that. rooting is okay...
try this link for karbonn roms
"goo .gl/ p0QK1m"
(remove the quotes and no spaces)
oh, and does anybody have an idea of creating a one-for-all rom that would work on any android device, be it tablet or smartphone ?
it could have the most basic features and could be based on android 4.4 kitkat....
it's purpose is mainly for backup... just in case no other rom is compatible with a certain phone and you can't find the stock rom anywhere...
please reply to my gmail id if you have any idea of doing so....
rajju 3004 @ gmail . com
(remove the quotes and no spaces)
Note: Never ever change or add any new fonts to a Karbonn device...
can u give me link of custom roms for titanium s5 plus.
read my post!
anmolmatharu said:
can u give me link of custom roms for titanium s5 plus.
Click to expand...
Click to collapse
see my post on the first page !
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
titanium x stock rom
uinod3 said:
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
Click to expand...
Click to collapse
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
rjt.rockx said:
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
Click to expand...
Click to collapse
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
try this
uinod3 said:
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
Click to expand...
Click to collapse
try this :
tr.im/MMLf
it is not a rom which can be flashed through recovery...
see this for instructions
tr.im/MMUk
hope it helps !
Scatter file.
cybercrawler had asked for the scatter file of Karbonn titanium s5 plus.
well, here it is, attached to this post.

[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method

Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient​
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
​
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)​
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2!
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Click to expand...
Click to collapse
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped you Thank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd​
Thread now opened!
hyelton said:
Thread now opened!
Click to expand...
Click to collapse
You mean you found the firmware files for the H901?
NYLimited said:
You mean you found the firmware files for the H901?
Click to expand...
Click to collapse
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi,
I bought my V10 at expansys australia, and the version is H961N Dual Sim,
but the software version is v10b-SEA-XX instead of v10b-HKG_XX, I believe it is a singapore version.
Any one has the v10b-SEA-XX kdz file?
or
Is that compatible to flash v10c-HKG-XX on my Singapore version of V10???
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
burnsky05 said:
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
All my kdz files come from LGs site that are on all my guides. I also have KDZs that are no longer available as well for other models.
Sent from my iPhone using Tapatalk
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
burnsky05 said:
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
Click to expand...
Click to collapse
Thanks, I've been keeping watching and uploading as I get them !
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't understand.. This thread is, according to the title, for LG v10...
NYLimited said:
I don't understand.. This thread is, according to the title, for LG v10...
Click to expand...
Click to collapse
Yes, Remember there are close to 10 different models for the V10. There are more than just the T-Mobile H901 V10
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
mwebb34 said:
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Go to this thread
http://forum.xda-developers.com/showthread.php?t=3244237
Thanks
Sent from my VS990 using Tapatalk
Is it possible to install a different kdz on an identical spec phone?
I have h960a, can I install the new Turkish mm 6.0 kdz?
Keep in mind that Tr version is 64gb.
Is there kdz for H960A 32gb ?
Is this confirmed working for the VS990?
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
nocomp said:
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
Click to expand...
Click to collapse
Did you drag that window over?? That's normal. That message is supposed to come up.. In most cases when you drag it over you'll see it's actually flashing. It says that because there's not as it's not needed. But you should be using LGUP not the older flash tool
Sent from my iPhone using Tapatalk

Nokia 8 official Firmware June 2018 Oreo [ V4.88B_B04]

Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC.because the Tool only works with Authorized Service partners registered PC. . Now we have got OST tool working with patch .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
Nokia 8 Oreo Firmware :- https://drive.google.com/drive/folders/1t64iHuQQjmMnzcujZtjYplh6ipbiF6Cw?usp=sharing
changelog
Camera Preview/Video/Snapshot always get black frame when switching mode
Camera Not easy to switch camera professional and normal modes from UI
Indonesia E-Money Card cannot be read
OST tool & patch
Download OST LA v6.0.4:- https://yadi.sk/d/hkDVImee3NAZ7a
Download patch :- https://yadi.sk/d/Tm2MvTJs3NAZy2
password for patch :- 123
Oreo OST Tool & Patch
Download OST 6.1.2 & patch :- https://mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg -- Hope it works
For more details visit link :- https://forum.xda-developers.com/nokia-6/how-to/version-ost-la-6-1-2-t3743399
Again Many Thanks to @hikari_calyx for this contribution @heineken78 for the patch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Many thanks to @Quixote78 for the OST Too patch and the instructions ( which is posted in Nokia 6 forum)
Instructions
1. Download original firmware from the above link
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password :- 123)
6. Replace . exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 )
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. Your device will reboot and you may congratulate oneself.
blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC.because the Tool only works with Authorized Service partners registered PC. . Now we have got OST tool working with patch .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
Nokia 8 Firmware :-https://mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg
OST tool & patch
Download OST LA v6.0.4:- https://yadi.sk/d/hkDVImee3NAZ7a
Download patch :- https://yadi.sk/d/Tm2MvTJs3NAZy2
password for patch :- 123
Many thanks to @Quixote78 for the OST Too patch and the instructions ( which is posted in Nokia 6 forum)
Instructions
1. Download original firmware from the above link
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password :- 123)
6. Replace . exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 )
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. Your device will reboot and you may congratulate oneself.
Click to expand...
Click to collapse
Big thanks, you're rock!
OK, I think I should ask the question here.
Is there any older release or testing firmware of Nokia 8 TA-1012 available?
The only thing I want to do is make the Nokia 8 Proto functional again.
Hello, this NOKIA N8 firmware, which specific models apply?
hikari_calyx said:
OK, I think I should ask the question here.
Is there any older release or testing firmware of Nokia 8 TA-1012 available?
The only thing I want to do is make the Nokia 8 Proto functional again.
Click to expand...
Click to collapse
Does the one mentioned in the op not working
chun804 said:
Hello, this NOKIA N8 firmware, which specific models apply?
Click to expand...
Click to collapse
Read op supported models are mentioned there
blackpanther0582 said:
Read op supported models are mentioned there
Click to expand...
Click to collapse
The model is TA-1012.
Eseguo la procedura come da guida, ma alla fine esce questo messaggio di errore, come posso fare ? Grazie
nokia 8 dual sim 4/64 TA-1004
nibera said:
Eseguo la procedura come da guida, ma alla fine esce questo messaggio di errore, come posso fare ? Grazie
nokia 8 dual sim 4/64 TA-1004
Click to expand...
Click to collapse
English please
blackpanther0582 said:
English please
Click to expand...
Click to collapse
I run the procedure as a guide, but eventually this error message comes out, how can I do it? Thank you
Nokia 8 Duos 4/64 model TA-1004
nibera said:
I run the procedure as a guide, but eventually this error message comes out, how can I do it? Thank you
Nokia 8 Duos 4/64 model TA-1004
Click to expand...
Click to collapse
Check if all USB drivers are installed
Check if Microsoft c++ library is Installed
Also check net framework latest is Installed
blackpanther0582 said:
check if all usb drivers are installed
check if microsoft c++ library is installed
also check net framework latest is installed
Click to expand...
Click to collapse
where can i find nokia 8 and microsoft c ++ librery usb driver ?
nibera said:
where can i find nokia 8 and microsoft c ++ librery usb driver ?
Click to expand...
Click to collapse
Driver will be installed by default . Check if it there in control panel and put device in download mode and try if USB driver is getting detected in PC
http://nokiatips.com/2017/08/29/fastboot-mode-nokia-6/
here is the image of the device connected to the PC in download mode mode that starts in this mode only if you launch the OST LA program, otherwise it does not start with the combination of the volume down + power keys, does not go
same error at the end of flashing.
nfluence said:
same error at the end of flashing.
Click to expand...
Click to collapse
Which is your model ?
it does not work
---------- Post added at 06:32 PM ---------- Previous post was at 06:21 PM ----------
check if all usb drivers are installed OK installed
check if microsoft c++ library is installed OK installed
also check net framework latest is installed OK installed
it does not work
I am also the wrong one, did you find the answer to the fix?
OK. I've already known how to enter Emergency download mode and unbrick Nokia 8 from Emergency download state.
And... I still can't figure out which partition is recovery partition.
Which Model
blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC.because the Tool only works with Authorized Service partners registered PC. . Now we have got OST tool working with patch .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
Nokia 8 Firmware :-https://mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg
OST tool & patch
Download OST LA v6.0.4:- https://yadi.sk/d/hkDVImee3NAZ7a
Download patch :- https://yadi.sk/d/Tm2MvTJs3NAZy2
password for patch :- 123
Many thanks to @Quixote78 for the OST Too patch and the instructions ( which is posted in Nokia 6 forum)
Instructions
1. Download original firmware from the above link
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password :- 123)
6. Replace . exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 )
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. Your device will reboot and you may congratulate oneself.
Click to expand...
Click to collapse
Which model Firmware it is? TA-1004 or TA-1012 or TA-1052

How to Flash Nokia 6 stock firmware 7.1.1

RESTORING NOKIA 6 (TA-1021) TO STOCK ANDROID.
ONLY FOR TA-1021
1. DOWNLOAD ALL THE FILES FROM GOOGLE DRIVE.
2. PUT THE DECEMBER 2017 OTA UPDATE ON YOUR SD CARD AND REBOOT THE PHONE TO RECOVERY MODE AND APPLY THE UPDATE VIA SD CARD
3. DON'T WORRY IT WILL SHOW ERROR AND ABORT THE INSTALLATION.
4. NOW REBOOT THE PHONE.
5. AND NOW REBOOT TO RECOVERY AGAIN.
6. IT WILL NOW SAY SOMETHING LIKE 7.1.1 ON TOP OF THE RECOVERY MODE SCREEN IN SMALL LETTERS.
7. THAT'S A GOOD THING BECAUSE BY INSTALLING THE DECEMBER OTA WE GET NOUGHT BOOTLOADER AND RECOVERY.
8. NOW EXTRACT THE FOLLOWING FILES :
1. OST_TOOL.ZIP
2. ONLINE UPDATE TOOL.ZIP
3. PLE-3320-0-00WW-A02_3 Nokia 6.ZIP
9. YOU CAN DOWNLOAD 7-ZIP TO EXTRACT THE FILES.
10. AFTER EXTRACTING OPEN UP OST_TOOLS AND INSTALL launcher.exe JUST CLICK AND NEXT,NEXT,NEXT TILL YOU SEE FINISH. BUT DO NOT OPEN THE SOFTWARE.
11. NOW GO INTO THE INSTALLATION FOLDER OF THAT SOFTWARE IT'S UNDER PROGRAM FILES X86/OST LA.
12. NOW OPEN THE EXTRACTED ONLINE UPDATE TOOL.ZIP EXTRACTED FOLDER AND COPY THAT ONE FILE TO THE OST LA FOLDER AND REPLACE THE FILE.
13. NOW DELETE ONLINE UPDATE TOOL.EXE.CONFIG FILE
14. NOW YOU CAN OPEN THE ONLINE UPDATE TOOL.EXE
15. CLICK NEXT AND LOAD THE FIRMWARE FROM PLE-3320-0-00WW-A02_3 Nokia 6, IT SHOULD BE AN NBO FILE.
16. REBOOT THE NOKIA 6 TO RECOVERY AND THE SELECT REBOOT TO BOOTLOADER.
17. THE NEXT BUTTON SHOULD APPEAR ON THE OST TOOL. CLICK NEXT THE SOFTWARE WILL WORK BUT THEN IT SHOULD SHOW THAT IT FAILED OF AN ERROR, AND THAT'S OKAY. IT SHOWS THE ERROR WHEN INSTALLING THE SOFTWARE FOR THE FIRST TIME.
18. NOW CLICK CONTINUE AND REBOOT THE PHONE INTO BOOTLOADER AND FLASH THE FIRMWARE AGAIN. IT WILL WORK !! AND THE PHONE AUTOMATICALLY REBOOTS.
LINKS
1. DECEMBER UPDATE
https://drive.google.com/open?id=18CxEOGUbf0XGcJ53ftpjI6GIozBVmPdt
2. OST TOOLS
https://drive.google.com/open?id=1OQHPfGEaQ2wFDpo3ABIo48AVbFTvl-SI
https://drive.google.com/open
id=1DLTM6F2xFGs1SWljZoPIIxIsn2X-osy9
3. NOKIA FIRMWARE 7.1.1
https://drive.google.com/open?
id=1ObwKEBvIF9ItrjAEanqMdANhoSOUIRum
******* I DO NOT OWN ANY SOFTWARE FROM NOKIA ******* ALL SOFTWARE ARE FROM XDA IT'SELF ****
******* I AM NOT RESPONSIBLE FOR DAMAGING YOUR PHONE **********
thank you for sharing
my device was successfully downgraded,
but from os 7 the update via ota jumps to os 9 instead of 8 first
Not funny.
ONLINE UPDATE TOOL.ZIP is password protected. Great, now I have a bricked device. What's the password?
EDIT1: It was 123 .... seriously???
EDIT2: After flashing it asks for password to load Android. System is encrypted. Wtf?
EDIT3: Did a wipe, works now. But it asks to download almost 2gb update and there is no way to cancel it. I hope it's not 9.
EDIT4: Yep, it's 9. Phone demanded to update to Android 9, only then it allowed to use it.
OnlineUpdateTool.zip PASSWORD IS 123
Can't bypass android 9 update
My phone was downgraded successfully but it doesn't start unless I update to android 9..... Plz help
Wantz Elshe said:
thank you for sharing
my device was successfully downgraded,
but from os 7 the update via ota jumps to os 9 instead of 8 first
Click to expand...
Click to collapse
can you tell me how to bypass android 9 update after factory reset im stuck plz help me
Hi there,
Sorry everyone I wasn't aware that this thread was active, if you still have problems I would like to help
Hi there,
Those who found it helpful no problem
And again my apologies I was not aware that there was a password for the onlineupdatetool
tomasxp said:
ONLINE UPDATE TOOL.ZIP is password protected. Great, now I have a bricked device. What's the password?
EDIT1: It was 123 .... seriously???
EDIT2: After flashing it asks for password to load Android. System is encrypted. Wtf?
EDIT3: Did a wipe, works now. But it asks to download almost 2gb update and there is no way to cancel it. I hope it's not 9.
EDIT4: Yep, it's 9. Phone demanded to update to Android 9, only then it allowed to use it.
Click to expand...
Click to collapse
Apologies for any inconvenience, when I bricked my phone non of the method online did not worked this is the only way I found working. And I did not came across any problems like you faced.
KIBS2173 said:
RESTORING NOKIA 6 (TA-1021) TO STOCK ANDROID.
ONLY FOR TA-1021
1. DOWNLOAD ALL THE FILES FROM GOOGLE DRIVE.
2. PUT THE DECEMBER 2017 OTA UPDATE ON YOUR SD CARD AND REBOOT THE PHONE TO RECOVERY MODE AND APPLY THE UPDATE VIA SD CARD
3. DON'T WORRY IT WILL SHOW ERROR AND ABORT THE INSTALLATION.
4. NOW REBOOT THE PHONE.
5. AND NOW REBOOT TO RECOVERY AGAIN.
6. IT WILL NOW SAY SOMETHING LIKE 7.1.1 ON TOP OF THE RECOVERY MODE SCREEN IN SMALL LETTERS.
7. THAT'S A GOOD THING BECAUSE BY INSTALLING THE DECEMBER OTA WE GET NOUGHT BOOTLOADER AND RECOVERY.
8. NOW EXTRACT THE FOLLOWING FILES :
1. OST_TOOL.ZIP
2. ONLINE UPDATE TOOL.ZIP
3. PLE-3320-0-00WW-A02_3 Nokia 6.ZIP
9. YOU CAN DOWNLOAD 7-ZIP TO EXTRACT THE FILES.
10. AFTER EXTRACTING OPEN UP OST_TOOLS AND INSTALL launcher.exe JUST CLICK AND NEXT,NEXT,NEXT TILL YOU SEE FINISH. BUT DO NOT OPEN THE SOFTWARE.
11. NOW GO INTO THE INSTALLATION FOLDER OF THAT SOFTWARE IT'S UNDER PROGRAM FILES X86/OST LA.
12. NOW OPEN THE EXTRACTED ONLINE UPDATE TOOL.ZIP EXTRACTED FOLDER AND COPY THAT ONE FILE TO THE OST LA FOLDER AND REPLACE THE FILE.
13. NOW DELETE ONLINE UPDATE TOOL.EXE.CONFIG FILE
14. NOW YOU CAN OPEN THE ONLINE UPDATE TOOL.EXE
15. CLICK NEXT AND LOAD THE FIRMWARE FROM PLE-3320-0-00WW-A02_3 Nokia 6, IT SHOULD BE AN NBO FILE.
16. REBOOT THE NOKIA 6 TO RECOVERY AND THE SELECT REBOOT TO BOOTLOADER.
17. THE NEXT BUTTON SHOULD APPEAR ON THE OST TOOL. CLICK NEXT THE SOFTWARE WILL WORK BUT THEN IT SHOULD SHOW THAT IT FAILED OF AN ERROR, AND THAT'S OKAY. IT SHOWS THE ERROR WHEN INSTALLING THE SOFTWARE FOR THE FIRST TIME.
18. NOW CLICK CONTINUE AND REBOOT THE PHONE INTO BOOTLOADER AND FLASH THE FIRMWARE AGAIN. IT WILL WORK !! AND THE PHONE AUTOMATICALLY REBOOTS.
LINKS
1. DECEMBER UPDATE
https://drive.google.com/open?id=18CxEOGUbf0XGcJ53ftpjI6GIozBVmPdt
2. OST TOOLS
https://drive.google.com/open?id=1OQHPfGEaQ2wFDpo3ABIo48AVbFTvl-SI
https://drive.google.com/open
id=1DLTM6F2xFGs1SWljZoPIIxIsn2X-osy9
3. NOKIA FIRMWARE 7.1.1
https://drive.google.com/open?
id=1ObwKEBvIF9ItrjAEanqMdANhoSOUIRum
******* I DO NOT OWN ANY SOFTWARE FROM NOKIA ******* ALL SOFTWARE ARE FROM XDA IT'SELF ****
******* I AM NOT RESPONSIBLE FOR DAMAGING YOUR PHONE **********
Click to expand...
Click to collapse
thanks for your sharing
i wanna test your way , but someones said that we force to upgrade to android pie after that !
is that true ?!
Try this
#MmdRza said:
thanks for your sharing
i wanna test your way , but someones said that we force to upgrade to android pie after that !
is that true ?!
Click to expand...
Click to collapse
Hi there,
Well if you turn off your wifi and mobile data at the beginning of the setup you will not be forced to download the latest version of android.
Regards
KIBS2173
After the flash, if you are prompted for a code, do a full delete.
Do not use network during setup, there will be no update.
Perfect description!
Thank you very much!
before u downgrade u have to remove all the Google accounts. otherwise when u got finished downgrading u will force to update to android 9 unless u haven't unlock the boot loader..
if bootloader unlocked u can bypass setup wizard using twrp file manager.
Downgrading deletes all data, including accounts.
Simply set up your phone without a sim card and don't connect to wifi. There will be no update.
Thank you
I made an account specifically to thank you. This works very well.
Just a note:
Remove your google account from your device before flashing. Otherwise, it won't let you skip the setup when you boot the phone after the flash.
This is due to a security feature in Android called Factory Reset Protection (FRP). Which essentially makes sure that the owner of the device (or basically the last account that was on it) is the same one logging in after the reset. That's why it doesn't let you skip the setup, thus forcing you to upgrade to Android 9.
If you didn't remove your google account before flashing, you'll have to:
1- Do the Pie update during the setup
2- Sign in with the same google account you had logged in before flashing
3- Remove that account
4- Do the whole flashing process from the start again
You can save yourself from this hassle just by removing the account BEFORE you flash to begin with.
Needless to say, you should disable WiFi and remove your SIM card to bypass the update on boot.
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
Also if I may, I have a small question. After downgrading to stock 7.1.1, can I re-flash the December OTA update to get a more recent version?
I want to do this because there's an issue with USB connection and I am hoping that the December OTA fixes it.
UPDATE: I was able to get the OTA zip files from teamandroid (I can't post the link because my account is new , sorry)
I was on 7.1.1 June 2017, so I flashed July, August, September, and October in order.
This gave me Android 7.1.2, October 2017 security patch, and fixed the USB issue.
MohRez said:
thanks for your sharing
i wanna test your way , but someones said that we force to upgrade to android pie after that !
is that true ?![yes ]
Click to expand...
Click to collapse
maniacalthief said:
MohRez said:
thanks for your sharing
i wanna test your way , but someones said that we force to upgrade to android pie after that !
is that true ?![yes ]
Click to expand...
Click to collapse
Check my reply, it explains what you should do to avoid having to upgrade.
Click to expand...
Click to collapse
Try This
Satharus said:
maniacalthief said:
Check my reply, it explains what you should do to avoid having to upgrade.
Click to expand...
Click to collapse
Hi everyone,
To prevent your phone from updating, after flashing and resetting, just skip the wifi connection, or eject your sim therefore no update will be found.
Kind Regards
KIBS2173
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can someone help me i get this error on my Windows 10, do I need to install something?
NETWORK problem
Has anyone faced network problem , like VOLTE not appearing? If any fix is available please write it here !

How To Guide UNBRICK GUIDE FOR ONEPLUS 9 EU(LE2113) ONLY

So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.
Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped
I'm trying my best but my internet isn't really doing a great job at uploading them at fast enough pace.
[email protected] said:
Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped
Click to expand...
Click to collapse
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.
EtherealRemnant said:
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.
Click to expand...
Click to collapse
Thank you for this I shall add this at the top of the instructions
alihaider9083 said:
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing
Click to expand...
Click to collapse
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q
jab5555 said:
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q
Click to expand...
Click to collapse
If these things had worked for most user we would've done so but since nothing was working for us this was the only way
alihaider9083 said:
...I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
Click to expand...
Click to collapse
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.
chrisrg said:
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.
Click to expand...
Click to collapse
Appreciate the remarks. I guess no one has tried or was lucky to get their hands on the files for this specific varient.
alihaider9083 said:
So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.
Click to expand...
Click to collapse
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...
xpli7 said:
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...
Click to expand...
Click to collapse
Could you please confirm the model number of your phone
alihaider9083 said:
Could you please confirm the model number of your phone
Click to expand...
Click to collapse
One plus 9 LE2113
xpli7 said:
One plus 9 LE2113
Click to expand...
Click to collapse
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.
alihaider9083 said:
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.
Click to expand...
Click to collapse
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care
xpli7 said:
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care
Click to expand...
Click to collapse
I'm really sorry man I wish you all the best. But if you can find a windows Laptop to do these things it'll make all the difference. But hoping you manage to fix it asap.
https://forum.xda-developers.com/t/...to-recover-from-a-brick-windows-only.4460859/
Try this method I came across this today thinking it might prove to be useful to you
Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
It's the first time using MSM tool
Thanks!
aldoc01 said:
Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
View attachment 5662811
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
View attachment 5662835
It's the first time using MSM tool
Thanks!
Click to expand...
Click to collapse
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post
alihaider9083 said:
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post
Click to expand...
Click to collapse
Hi!
Mine it's chinese version (LE2110). And I had installed EU ROM.
I don't know how or why, but I rebooted and started successfully after showing crashdump mode.
Anyway, If I learn how to unbrick it, It would be perfect for next time
Thanks!

Categories

Resources