So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.
Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped
I'm trying my best but my internet isn't really doing a great job at uploading them at fast enough pace.
[email protected] said:
Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped
Click to expand...
Click to collapse
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.
EtherealRemnant said:
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.
Click to expand...
Click to collapse
Thank you for this I shall add this at the top of the instructions
alihaider9083 said:
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing
Click to expand...
Click to collapse
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q
jab5555 said:
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q
Click to expand...
Click to collapse
If these things had worked for most user we would've done so but since nothing was working for us this was the only way
alihaider9083 said:
...I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
Click to expand...
Click to collapse
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.
chrisrg said:
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.
Click to expand...
Click to collapse
Appreciate the remarks. I guess no one has tried or was lucky to get their hands on the files for this specific varient.
alihaider9083 said:
So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.
Click to expand...
Click to collapse
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...
xpli7 said:
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...
Click to expand...
Click to collapse
Could you please confirm the model number of your phone
alihaider9083 said:
Could you please confirm the model number of your phone
Click to expand...
Click to collapse
One plus 9 LE2113
xpli7 said:
One plus 9 LE2113
Click to expand...
Click to collapse
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.
alihaider9083 said:
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.
Click to expand...
Click to collapse
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care
xpli7 said:
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care
Click to expand...
Click to collapse
I'm really sorry man I wish you all the best. But if you can find a windows Laptop to do these things it'll make all the difference. But hoping you manage to fix it asap.
https://forum.xda-developers.com/t/...to-recover-from-a-brick-windows-only.4460859/
Try this method I came across this today thinking it might prove to be useful to you
Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
It's the first time using MSM tool
Thanks!
aldoc01 said:
Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
View attachment 5662811
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
View attachment 5662835
It's the first time using MSM tool
Thanks!
Click to expand...
Click to collapse
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post
alihaider9083 said:
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post
Click to expand...
Click to collapse
Hi!
Mine it's chinese version (LE2110). And I had installed EU ROM.
I don't know how or why, but I rebooted and started successfully after showing crashdump mode.
Anyway, If I learn how to unbrick it, It would be perfect for next time
Thanks!
Related
How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip
Fail: Preserve Calibration fail (cannot find nv item in nv) What does it mean?
I just made up the PAC file with NV = mtd6.backupfixnv.yaffs2.img extracted from other phone (same model). This is what was supposed to be done isn't it? Is the error saying that I got a wrong nvitem file or something?
I couldn't extract nvitem.bin file so I just pointed it to the mtd6.backupfixnv.yaffs2.img file.
Thanks ...
Good Guide!
All steps are described clearly...
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
:victory:
brijeshep said:
But in the case of Spredtrum YXTEL G926 (Clone of Galaxy Ace) we have to UNCHECK all the items in Calibration Tab also....
Click to expand...
Click to collapse
Thanks for the feedback. I don't have one of those phones so i was not aware of that . Cheers
Not working for Micromax Bolt A34
Ravage32 said:
How To Use Research Download!
Hey all! I was looking around the web and i didn't seem able to find a actually proper tutorial on how to
use research download for flashing phones and such. It not necessarily difficult it just took me a while to
figure out how to use when i first started using it so i thought I'd make a tutorial for anyone who doesn't
know it
Glossary
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses.
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.
Once your don't editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now ) When it is finished just press the stop button and
disconnect your phone! :victory:
Feel free to ask questions, but PLEASE don't quote this whole thing. Quote sections!
Cheers! :good:
Links
Research Download: http://www.mediafire.com/download/1gt7yr1ae7dc97g/ResearchDownload R2.9.7002.zip
Drivers: http://www.mediafire.com/download/cyi7knz4q66bbbx/Spredtrum Drivers LATEST.zip
Click to expand...
Click to collapse
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.
Java Baba said:
Here is what i had done:
1.Loaded all the required drivers which include com port driver,usb debug drivers.
2.Loaded .pac firmware file into research downloader,baud rate selected 115200, and in windows PORTS also.
3.Clicked on play button and pressed volume down (and up key - next time) button then plugged in the micro usb cable.
4.It start detecting two ports vendor specific and status changes to CHECKING BAUDRATE which never ends.
My device is just refusing BOOT after the BOLT logo.
Click to expand...
Click to collapse
i have the same problem =/
soko89 said:
i have the same problem =/
Click to expand...
Click to collapse
Have you tried changing the budrate? For spreadtrum SP6820 the default is 115200 for other phones im not sure what i would be, have a go with different ones and see which ones work Cheers
Help Me Please...
Can you please help me by any way to add a new language to the .pac file.
I couldn't decompile the system.img file which extracted from the official .pac file by Research Download.
I just want any way to edit the extracted system.img or a way to create a custom system.img.
Note: I have another .pac file contain the wanted language but it doesn't work on the device.
Thanks in advance
For those who wants to make a .pac file from spreadtrum backup
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8
abhimortal6 said:
for those who wants to unbrick their spreadtrum phones Enjoy...!
Dont Forget to hit thanks!
Go to - https://www.youtube.com/watch?v=3s6qMzYnVB8
Click to expand...
Click to collapse
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?
akisg said:
I'm trying to unbrick a chinese elitek f6658 device. The only rom i've found for this device is this Elitek f6658 .
There should be a .pac file in order to flash this but in the rom package i can't find any, only a .p5c file. Tried to extract all the files inside in order to create a .pac file as mentioned above, but i can't find 1-2 .img files that are needed for packaging and the result is an error when trying to load the packet file. Anyone have any idea how can i restore this chinese brick?
Click to expand...
Click to collapse
its already a .pac file just rename it to " .pac " from " .p5c "
Pressed Play Button And connected my device..
but no any progress shown in Research download..plz help..
Make sure you have ALL the drivers installed correctly and that when u first connect it its showing up as somthing like "Spreadtrum phone" connected in your new devices popups. Probably good to restart the computer after you install the drivers. Are you using 64 or 32 bit? Ive had lots of troubles lately with 64bit windows 8 because drivers would not install because of signature verification. Works better on windows 7.
P5C file flash tool
Use this micromax A075 flash tool to flash .p5c file
salim
Getting FDL2 Error.sir plx help me..
Device-Karbonn A6
Need more info haha . Are you using different FDL's cuz some roms are able to use just a set of FDL's which can be used with all custom roms/flashing. If not and you have a pac file, most likely its not for you phone.
I have a T9500b htm and I have a doubt, in steps 5 and 6 what options must i select and what not. ? the phone block with to much unlock tries, I trying to do a factory restore. I don't want brick the phone.
cant use the spd tool
i flashed a wrong boot image to my phone (Itel 1502 , sp7731) using flashify. then after a reboot my phone got stuck on the boot menu just displaying the inote logo.
i thought on flashing a fresh stock rom.
but the problem is, after connecting my phone to the computer it displays windows cant recognise the usb device. then the spd tool displays that the device is unpluged.
please help.
Micromax A27/O+ 8.31 Android
Good Day Ms. / Mr. ?
I have O+ 8.31 android that are compatible with the OS of micromax a27.. I used this tool for flashing stock rom of my bootloop phone and it will be ok. But when i tried to uncheck some files and i only select boot logo to change the logo of stock rom of MM a27 after i flash the logo of O+ my phone is dead, i tried to switch on and it will never turn on and when i connect my phone in my computer, cannot be detected my phone even charging it is does not work?? I think i deleted the whole OS of my phone?? But the battery of my phone is full!! What can I do now to fix it?? Please help! ???? thanks for advice in advance! ??
hello sir. I've tried your guide but mine is on working. when i hit start download button their no progress of status showing or any happens. please help i want to flash O+ 8.96 phone.thanks
Hi,
First of all, I'm surprised that Lenovo Phab Plus has no forum section although Pahb 2 plus has.
Today I installed Xposed Alpha 3 and selected XPosed framework SDK for ARM 64 bit. It endded up to bootloop and worse I accidentally wiped my device without any backup (can't be worse than this).
I surfed the internet for almost a day and found few ROW ROMS on lenovo-forums which is russian website. Problem is it requires PC connection and my phone can not be read but in recovery mode. i.e. when I use:
Code:
adb devices
I got
Code:
1f82f24b recovery
I only get my phone recognized in recovery mode only since OS is wiped thanks to the naive I represent.
My question is:
1. Can anyone reach a zip ROM so I can install it directly from TWRP. I can transfer files to my phone when I'm in recovery mode as it is recognized as ADB Interface
2. Does ROW ROM require my phone to be in another mode other than recovery as I failed to get Download_with_partition.cmd to work although as I mentioned adb devices command returned my device ID and recovery word.
Your help is appreciated
Solution
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
New clean install guide needed
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Hazeriff said:
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Click to expand...
Click to collapse
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
wbadry said:
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
Click to expand...
Click to collapse
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Hazeriff said:
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Click to expand...
Click to collapse
Hmmm...
Anybody care for help?
Xda experts..??
Hazeriff.. this pop-up comes up when you are browsing, you can just ignore it.. Its just a false pop-up
Normally you dont get pop-up like these on Android
Hazeriff said:
Hmmm...
Anybody care for help?
Xda experts..??
Click to expand...
Click to collapse
Thanks dude!! You saved my butt. This is exactly what I needed and worked perfectly.
You are a legend!
wbadry said:
After posting the thread, I found that stock rom:
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
Hello to all.
unfortunately lacking all the commands of the txt file.
You can post all commands?
thank you
---------- Post added at 12:56 PM ---------- Previous post was at 12:44 PM ----------
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
please help me because i have brick my LENOVO PHAB PLUS
thanx it's work with me
frimware flashed
i need your help. its urgent. i am having lenovo phab plus but it is not working,
problem is os wiped, wrong flashing, even logo is not coming, if you have any solution for this please let me know on my email address
[email protected].
humble request. please
Thanks brother,I think i try 50+ sites and finally your one is working for me
bro can you help me to fix my phab plus
udhay441 said:
Thanks brother,I think i try 50+ sites and finally your one is working for me
Click to expand...
Click to collapse
bro can you help me to fix my phab plus i brick my phab plus, and everytime i do the fastboot it always say that tz.bmn is error can u help me
you guys, rock
Hi, thanks for the ROM file, unfortunately, even if everything goes well, my PB1-770M will stay in the bootlop
I do not even get into recovery, I do not even see the indication when the charger is connected. Perhaps the motherboard is damaged, right?
Flash official Rom for Lenovo push plus -770M
Firmware File
Search
Home☰
Lenovo Phab Plus PB1-770M
Home > Lenovo > Lenovo Phab Plus PB1-770M
On this page, you will find the official link to download Lenovo Phab Plus PB1-770M Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.
Download Lenovo Phab Plus PB1-770M Stock Firmware (flash file)
File Name: Lenovo_Phab_Plus_PB1-770M_USR_S000169_151229.zip
File Size: 2 GB
How to Flash: Follow Tutorial
Firmware Link: Click here to Start Download
Download Firmware
Download Flash Tool
Download USB Driver
For PC Software
How to Flash
Step 1: Download and extract the Lenovo Phab Plus PB1-770M stock firmware package on your computer.
Step 2: After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step).
Step 4: Follow the How-to Flash Manual to Flash the Firmware on your Lenovo Phab Plus PB1-770M Device.
Follow Detailed Guidelines
Readme Once:
[*] Take a Backup: If you are going to flash the above Firmware on your Lenovo Phab Plus PB1-770M device, then take a backup of everything as because your personal data will be deleted after flashing the stock firmware.
[*] The firmware shared on this page is officially released by the company and helps you to recovery your device if you ever got bootloop, software error, update error, hanging and dead issue.
COMMENTS
Site Links
Donate
Privacy Policy
Contact
Trending
Alcatel Firmware
Samsung Firmware
Vivo Firmware
Connect
RSS
Facebook
Made with ♥ in Spain | Powered by BlueHost
Copyright © 2014-2018 Firmware File. All Rights Reserved.
low internal memory after flafsh lenovo pb1-770m
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
mazvir said:
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
Click to expand...
Click to collapse
I had the same problem and I solved it by installing TWRP and resizing /data partition via it.
Downloaded the above FW successfully but when I followed the step-by-step guide, I got this error message:
==================
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_1
60420_ROW\SW> adb reboot bootloader
adb : The term 'adb' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At line:1 char:1
+ adb reboot bootloader
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Suggestion [3,General]: The command adb was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: ".\adb". See "get-help about_Command_Precedence" for more details.
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW>
=============================
I am on Windows 10 and it's Windows Power Shell that popped up.
Any help, please?
Thank you.
This is good I have Lenovo PB1-770N and work for me just I connect my phone and open the zip then I go to SW folder and press "Download.cmd " and ebriting go by self,lol them flash by self we don't need do anything lol. Thanks for the good rom.
NOTE: don't turn off your phone just connect and press " Download.cmd" file
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
Download link
Nokia 3 Firmware :- https://mega.nz/#!RAlVHJJC!9o0Ntn0GGiPuWB1-GQw2kP3dYwGw3jIcQJ_f-V1eJGc
Nokia 5 Firmware :- https://mega.nz/#!Qd0GwLYa!lQ4owEX37KMAEg_4M5OMnROMU3nuih1T0iPiaFpv6_E
Nokia 6 Fimrware :- https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
New Link for all Upcoming firmware's
https://drive.google.com/drive/folders/1t64iHuQQjmMnzcujZtjYplh6ipbiF6Cw?usp=sharing
OST tool & patch
Download OST LA v6.0.4:- https://yadi.sk/d/hkDVImee3NAZ7a
Download patch :- https://yadi.sk/d/Tm2MvTJs3NAZy2
password for patch :- 123
Many thanks to @Quixote78 for the OST Tool patch and the instructions ( which is posted in Nokia 6 forum)
Instructions
1. Download original firmware from the above link
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password :- 123)
6. Replace . exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 )
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. Your device will reboot and you may congratulate oneself.
Firmware supported for below Nokia 3 Supported Models
NOKIA 3 TA-1032 DS
NOKIA 3 TA-1020 SS
NOKIA 3 TA-1028 SS
NOKIA 3 TA-1038 DS
Firmware supported for below Nokia 5 Supported Models
NOKIA 5 TA-1053 DS 16GB+2GB
NOKIA 5 TA-1024 SS 16GB+2GB
NOKIA 5 TA-1044 DS 16GB+2GB
NOKIA 5 TA-1027 SS 16GB+2GB
blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
Click to expand...
Click to collapse
thanks very much:good:
oh,bad,my phone can not boot.
18227077056 said:
oh,bad,my phone can not boot.
Click to expand...
Click to collapse
You cannot flash the firmware . Let some Devs help out to extract the firmware from that package . If your device is not booting pls visit nearest SC to get it repaired . They won't charge u
nokia 6 ta-1000
hi,my mobile stucked at recovery mode.can i use it to get my mobile to normal state.
Try flashing the ROM with this tool
https://androidmtk.com/use-sut-l3-tool
WisMartins said:
Try flashing the ROM with this tool
https://androidmtk.com/use-sut-l3-tool
Click to expand...
Click to collapse
So great to list that here . Have you tried and being successful . If so I can provide all Nokia models firmware 3 , 5 ,6 and 8 too
blackpanther0582 said:
So great to list that here . Have you tried and being successful . If so I can provide all Nokia models firmware 3 , 5 ,6 and 8 too[/QUOTE
That any one can tell me why SUT always say that the program is outdate?
Click to expand...
Click to collapse
blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
If you have the tool you should share it so people can patch it
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
If you have the tool you should share it so people can patch it
Click to expand...
Click to collapse
Sure if it can be patched anyways I will share the ost tool tomorrow once I reach office
blackpanther0582 said:
Hi All,
Nokia 3, 5, 6 & 8 Official Firmware flashing tool is Known as OST ( Online Service Tool) . I.e for flashing the firmware you need the tool, unfortuanely the tool as of now wont work for any Consumer end PC. because the Tool only works with Authorized Service partners registered PC.
But i can give you the download link to the firmware , i dont know how much husefull this will be, Might be some Good Dev's out here could do something .
Note:- the Firmware file extension is .nb0 , hope you guys will find a way to extract it .
Download link
https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM
Click to expand...
Click to collapse
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.
harisn said:
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.
Click to expand...
Click to collapse
Please....any tools for flash it? Or only in a dream
T3DS said:
Please....any tools for flash it? Or only in a dream
Click to expand...
Click to collapse
Please check the op I have updated the tool link . If someone can patch it to get it working :laugh:
harisn said:
I was only able to partially extract the package files. It crashes in between! Haven't tried flashing it anywhere though.
Click to expand...
Click to collapse
I've been able to extract all of the Nokia 6 files. I have a TA-1025, so this will be no use for me I'm assuming. Would anyone be interested if I send the unpacked files?
Ok so interesting turn of events....
So I downloaded SUT L1, the same link that was posted earlier in the thread to see if I got the same error about the program being out of date for the firmware. Sure enough....
I got the same error.
So I started looking at the files for the SUT L1 program and the program op first uploaded for flashing firmware and I started noticing a lot of the files looked.... really familiar. They couldn't be the same, could they? There was only a couple of files that weren't the same, the biggest outlier being an exe called SoftwareUpdateTool in the SUT L1 program files. Surely it's not as easy as dragging the exe from one folder to the next ri-?
Yes, yes it is that easy. Can anyone confirm this does anything?
h t t p s://drive.google.com/file/d/0B60NFIDB93wudDNXaG5vMkEyWVE/view?usp=sharing
(xda won't let me post links since I haven't had 10 posts)
Sorry for the back to back posts, but I've uploaded the unpacked Nokia 6 MENA firmware. xda isn't going to let me post a proper link again, so I'll split it up like last time. Hope this helps!
h ttps://drive.google.com/file/d/0B60NFIDB93wuX192Ym1aS19nWFk/view?usp=sharing
tertty said:
Sorry for the back to back posts, but I've uploaded the unpacked Nokia 6 MENA firmware. xda isn't going to let me post a proper link again, so I'll split it up like last time. Hope this helps!
h ttps://drive.google.com/file/d/0B60NFIDB93wuX192Ym1aS19nWFk/view?usp=sharing
Click to expand...
Click to collapse
So simply what does it mean . You mean that the OST tool provided is outdated one ?? Sorry I didn't get your point .
blackpanther0582 said:
So simply what does it mean . You mean that the OST tool provided is outdated one ?? Sorry I didn't get your point .
Click to expand...
Click to collapse
The OST I provided a link for is the most current, up to date flasher for the Nokia 6.
The software op provided was prompting for a network login when started. When the SUT L1 program was linked and suggested I noticed that the two programs (the software provided by op, and SUT L1 provided by another user) are very alike if not the same program. I simply took the launcher from SUT L1, that did not prompt for a network login, and copied it over to the program op provided. It now works and hopefully you can flash .nb0 files through it, though with the current files given I do not have the correct hardware to flash it to and I don't want to risk it! The program I linked is a Nokia 6 firmware flasher that I believe works.
Sorry for the confusion
tertty said:
The OST I provided a link for is the most current, up to date flasher for the Nokia 6.
The software op provided was prompting for a network login when started. When the SUT L1 program was linked and suggested I noticed that the two programs (the software provided by op, and SUT L1 provided by another user) are very alike if not the same program. I simply took the launcher from SUT L1, that did not prompt for a network login, and copied it over to the program op provided. It now works and hopefully you can flash .nb0 files through it, though with the current files given I do not have the correct hardware to flash it to and I don't want to risk it! The program I linked is a Nokia 6 firmware flasher that I believe works.
Sorry for the confusion
Click to expand...
Click to collapse
Yes mate what you told is exactly right the one i provided need a network login to HMD global server for key auth . Once verified only we can flash the firmwares . I uploaded it hoping someone can patch it to get it working without network login . The SUT L1 looks similar to the OST in some ways but I don't know whether they are the same. And at last only way we need is a successful firmware flash regardless of which tool we use . I can only help nyou guys with all official firmware supports for whichever model Nokia release
blackpanther0582 said:
Yes mate what you told is exactly right the one i provided need a network login to HMD global server for key auth . Once verified only we can flash the firmwares . I uploaded it hoping someone can patch it to get it working without network login . The SUT L1 looks similar to the OST in some ways but I don't know whether they are the same. And at last only way we need is a successful firmware flash regardless of which tool we use . I can only help nyou guys with all official firmware supports for whichever model Nokia release
Click to expand...
Click to collapse
Could you provide me with the Nokia 6 TA-1025 firmware?
Guys, please check your phone version before downloading the toolkit - dont use 2.19 toolkit on 2.21 phone-version! I don't know why everyone is killing their phone right now! This is not an easy-to-do tutorial! It requires time and at least a bit knowledge. Please read this carefully - use google for the most important words and start after understanding everything! I won't help via PM when you 'bricked' your phone!
Welcome to the WIP Tutorial "How to use GApps on the Nubia X"!
Keep in mind this is a workaround and should not be the official way in how to do it! Im not taking any responsibility if anything goes horribly wrong
Understood? Let's go then!
STEP 1 - Preparation
Click to expand...
Click to collapse
We need to prepare the phone now.
Note: This is mandatory for the rest to work
Unlock the Developer options by going to Settings ►About phone ►Rapidly tapping on the "Build number" field until the phone returns "You are an developer".
Go to Settings ► Other system settings ►Developer options - and change the state of "OEM Unlocking" to ON.
Again in Settings ► Other system settings ►Developer options enable "USB Debugging"
Now, you need to prepare your PC (in short: install adb). Please Google this on your own ("How to install adb on {your OS}").
Alright, we are done with the phone for now.
Let's go to the downloads!
STEP 2 - Downloads
Click to expand...
Click to collapse
nubia-root-toolkit V211 (Actually the magic behind everything). Source: 百度云, pw: 7m9s - by 绯色玻璃
nubia-root-toolkit V219 (Actually the magic behind everything). Source: 百度云, pw: 7m9s - by 绯色玻璃
Link2SD (in order to convert to system later)
GoogleFrameworkInstaller
Great job so far.
Now, we can start doing dev-things !
STEP 3 - Let the magic happen! (ROOT)
Click to expand...
Click to collapse
Note: this is the part where we change system files. Please continue at your own risk! If you don't know what a root is you should better not do that.
Note: I don't own this toolkit. The source is linked above. I would recommend translating the original page source and reading throgh it. Source
Alrighty then? Damn, ur edgy.
Plug in your phone and wait until it gets recognized by your OS.
Extract the "nubia-root.zip", go into nubia-Root ► nubia-X, and run the "nubia-X_Root-V211.exe" with admin priv.
We don't understand nothing, because it is a chinese source... But according to the original thread, close (X) the first window that appears.
You will now see a window with "(Random text) ROOT"-Button on the right. After you click it, you'll get a log output of what your phone is doing via ADB.
Finished? You will see "Success" at the bottom including some weird characters. Lmao #chineseprograms.
What happened right now?
Well your phone is rooted. The program archived this by flashing a partition on your phone with adb.
First, it unlocked it (see my dev thread for more infos) and after that it flashed the bootimage. In short.
Now boot back into your phone and continue your journey!
STEP 4 - Installing apks on the phone
Click to expand...
Click to collapse
Remember all these apk's you have downloaded before?
We are going to use them now.
Make sure your phone is still plugged in. We are using 'adb' now so open up a command-prompt / powershell / bash.
The syntax is the following: "adb install NameOfTheFile.apk" - do this with every downloaded apk. Example: "adb install /home/user/link2sd.apk".
STEP 5 - Install GApps
Click to expand...
Click to collapse
Now the fun part.
We are going to install the required Google Apps as a normal user.
IMPORTANT: Don't run any of the Google Apps after you see them on your phone. I know you are hyped but its not time to do this right now.
Run the App called "谷歌安装器" (or the app with a playstore-like symbol). You will see a screen with chinese text and a blue button.
Click the blue button - the app will now download every GApp you need. After every download you will be prompted to install the app - confirm this and deny any Nubia tips for "hey you can download a newer app". Just install it like a normal app.
If you encounter the "unknown source"-error, follow the instructions on the device (or google "how to enable install apps from unknown sources").
Thats it! Wohoo.
Well no.
Please restart your phone, before continue!
STEP 6 - Make GApps powerful (using Link2SD)
Click to expand...
Click to collapse
Well I didn't found a better way as making the GApps System right now.
Because we don't have access to TWRP (right now ;D), this is the way to go.
I assume you have Link2SD installed (if not, go to Step 4 and install Link2SD!).
Open up Link2SD and click on the three dots located in the upper right hand corner.
Click "Search" and type in "Google". You will see a bunch of applications there but we only care about some of them.
We will use the following procedure: Click on the searchresult ► Click on the three dots ► "Convert to system app" ► Confirm. (It might be called somewhat with "system" in it, if you dont find it).
Do this procedure with the following apps: "Google Service Framework", "Google Play Store", "Google Play Service", "Google Contacts Sync", "Google Calendar Sync" and "Google Account Manager".
Done? Restart your device again. (You can do that by clicking on the side-menu of Link2SD ► Reboot ► Reboot.
Step 7 - Enjoy!
Click to expand...
Click to collapse
Well, you are an official hacker now... Well not really.
But you did something which is not that easy.
If you want to learn more or if you have any questions left contact me on discord (My ID: Captain Teemo#9394).
And if you are happy with the result, consider my time writing this for you and drop me a coffee: https://paypal.me/THeckel - your awesome!
Thanks for reading and enjoy your nubia - as you want!
@Teeemoo, most of the people will do that for first time. It will be good to include:
BE SURE THAT THE PHONE VERSION MATCHES THE VERSION OF THE SOFTWARE!
The described process up it's only of v2.11. For v2.19 and up you need the corresponding tool.
If you ignore that, you risk to soft brick your phone.
1. Magisk and Xposit will be loaded on the phone - do not play at any cost with them (upgrade or stuff). That will put your phone on a boot loop. I know it form personal experience. To fix that it's a bit tricky.
2. When you start the root - be sure that your phone is unlocked. Watch it when it ask permissions.
3. Moving apps with Link2SD can be tricky as well. The app will be moved to /system partition and it's limited. Also if you promote and demote app, doesn't mean that you'll get the same space on /system again. There is option to do that, but need some expertise level.
4. Abut when the GApps to be set at system - after the reboot or before it - I'm not that sure. For me was working the option only after the root. For that reason, preload the Link2SD in advance.
5. v2.19 root reports a virus inside. If you're afraid to open it, then use a sandbox for that purpose (shade sandbox is pretty ok for that purpose).
this is awesome, thank you so much. Let's get you some coffee
frankstoy said:
this is awesome, thank you so much. Let's get you some coffee
Click to expand...
Click to collapse
Great! You are the reason why programming and doing something for a community is so fun!
Keep it up - you're awesome!
Thanks!
root issues
Hi
thank you to make a tutorial about rooting the phone i did everything you said in step 1 and 2 but iv'e had a issues with the reboot this is the picture of my phone right now do i need to reinstall the factory firmware ? thank you in advance
Hugo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 11:10 PM ---------- Previous post was at 11:00 PM ----------
I tried flashing the new software for google play service and i got an error
your device is corrupt
I followed the steps to the tutorial and failed anyone can help me reload oem software on the phone thanks
Wait, what?
You got in the boot-loop?
No why. I told you what to NOT to do
PM to explain you how to recover.
nuvocell said:
Hi
thank you to make a tutorial about rooting the phone i did everything you said in step 1 and 2 but iv'e had a issues with the reboot this is the picture of my phone right now do i need to reinstall the factory firmware ? thank you in advance
Hugo
---------- Post added at 11:10 PM ---------- Previous post was at 11:00 PM ----------
I tried flashing the new software for google play service and i got an error
your device is corrupt
I followed the steps to the tutorial and failed anyone can help me reload oem software on the phone thanks
Click to expand...
Click to collapse
Hey hugo, did you update the phone before doing the tutorial?
The picture is not loading, btw. You might upload it to an image uploader and send the link here.
Here you can download the official rom
Hey,
I did everything but at the end when i open the play store i just got an endless loading !!
Pls help <3
---------- Post added at 11:51 PM ---------- Previous post was at 11:45 PM ----------
q8falcon said:
Hey,
I did everything but at the end when i open the play store i just got an endless loading !!
Pls help <3
Click to expand...
Click to collapse
Solved : passed "Google play services" in "Link2SD" by mistake.
Thanks for the great job :good::good::good:
Thanks for the quick reply , i did not have an update to do on the phone, i used the chinese software to root first like mentionned in the tutporial , then phone went into device corrupted ,
now im trying to install the oem firmware on the phone im trying with smart flash tool , but in the nx616j update file has no map.txt file
what can i do to reload oem software on the phone?
There are 2 versions for the software.
One of them has a single button on the right side with strange symbols and "root" in between.
The other one has 2 buttons - one is with "root" and the other "fastboot" in between.
If your phone is in boot-loop and before you do something stupid hard-core.
Reboot the phone in fastboot - long hold power, then when restarts - volume down + power.
You may need few restarts before stabilize it in fastboot.
Then use that second software and press the button which has label "fastboot" in the text.
Restart and you have to be ok
here is th escreen after root
https://photos.google.com/share/AF1QipOSac3LED_NSTD7Y0ZUDggclcTq1kg4JeiBKn3PaNkO6BDNJpfKCkTVJ4BGzNMOoQ?key=VUFDcXdYczdpS0U0R1hNeFljeHlTNEVzNkZ4QVh3
Simple fix.
Do what I told you. Read my pervious post.
br_other said:
Simple fix.
Do what I told you. Read my pervious post.
Click to expand...
Click to collapse
I read but it's not so clear you mentioned something like 2 programs witch program are you referring too?. Also if you saw my picture I think the software must been reinstalled. I normally works with Samsung and having all the software to fix it but Nubia it's something new for me . Thank you very much for your help.
Br_other refers to the original Chinese link (see the tutorial there is the link somewhere).
The new tool includes a fastboot option.
Try to get the new download, otherwise I will reupload it later.
Otherwise:
Your bootloader is unlocked and a wrong bootimage was flashed.
So basically to repair you need to get into fastboot or recovery by pressing (phone must be off) volume down or up with the power button simultaneously.
If this still works you can download the official firmware, extract the boot.img out there and reflash it with ADB.
Basically adb flash boot boot.img
Hello. Thanks so much for the tutorial.
I have finished all the steps, however when I open playstore, stuck at "checking info" status. What could have I done Wong? Or missed any.
Thanks
phone is brick now
Hi guys
let me explain you whats going on with my phone ... But first i would like to thanks @Teeemoo and @br_other they've helping me a lot with my rooting issues but since then my phone is in boot loop mode and i can't use anymore I read everywhere on the net to found a solution but it's seems to not having anything works!!!! To do a short story my phone was working fine with the chinese rom but was useless without google play services. i was waiting every day for a root or global rom to flashed. Last week i receive a OTA software update version 2.19 so i did the update. 2 days ago i saw a post with all the instructions to root the phone and install the google framework with working apps in the main pages, not like the stupid sand box that was terrible to use. I followed the instruction and root the phone . After the root complete the phone reboot in bootloop mode and with no way to recovery my original software. I've posted my issues in this forum and get help from 2 member mentioned above. They told me to found the other root file with fastboot recovery it was really hard to found because the link is not active anymore but i finally found and install. I've put my phone in fast boot mode and try to recovery but i always had the same error message see the pictures attached. I decide to do more researched on the net and i found a way to install the boot loader IMG using ADB command . I try to install but i realize by making some test that my bootloader is not unlocked so i'm not able to install the image . I d'ont know what can i do now but i think i will throw my phone out the windows .......
sorry for my english is not my primary language
nuvocell said:
Hi guys
let me explain you whats going on with my phone ... But first i would like to thanks @Teeemoo and @br-other they've helping me a lot with my rooting issues but since then my phone is in boot loop mode and i can't use anymore I read everywhere on the net to found a solution but it's seems to not having anything works!!!! To do a short story my phone was working fine with the chinese rom but was useless without google play services. i was waiting every day for a root or global rom to flashed. Last week i receive a OTA software update version 2.19 so i did the update. 2 days ago i saw a post with all the instructions to root the phone and install the google framework with working apps in the main pages, not like the stupid sand box that was terrible to use. I followed the instruction and root the phone . After the root complete the phone reboot in bootloop mode and with no way to recovery my original software. I've posted my issues in this forum and get help from 2 member mentioned above. They told me to found the other root file with fastboot recovery it was really hard to found because the link is not active anymore but i finally found and install. I've put my phone in fast boot mode and try to recovery but i always had the same error message see the pictures attached. I decide to do more researched on the net and i found a way to install the boot loader IMG using ADB command . I try to install but i realize by making some test that my bootloader is not unlocked so i'm not able to install the image . I d'ont know what can i do now but i think i will throw my phone out the windows .......
sorry for my english is not my primary language
Click to expand...
Click to collapse
Try this via ADB:
Code:
fastboot oem nubia_unlock NUBIA_NX616J
and then
Code:
fastboot flash boot boot.img
Teeemoo said:
Try this via ADB:
Code:
fastboot oem nubia_unlock NUBIA_NX616J
and then
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
doesnt work
nuvocell said:
doesnt work
Click to expand...
Click to collapse
Because you need to replace the 'boot.img' part with the location of ur boot.img file.
If you don't have the boot image, tell me and I will extract it for you.
Cheers
Teeemoo said:
Because you need to replace the 'boot.img' part with the location of ur boot.img file.
If you don't have the boot image, tell me and I will extract it for you.
Cheers
Click to expand...
Click to collapse
let me explain you what i did . i download the oem firmware and extract it then i took the boot image file and copy to the C drive and replace the name by recovery.img. is that is correct ?
Well guys, its finally here!! You can finally unbrick your device without any jtag,medusa, octopus box!!
DISCLAIMER: IM NOT RESPONSIBLE IF THIS DOES SOMETHING BAD TO YOUR DEVICE WHICH IT SHOULDNT.
WARNING: THIS WILL DELETE EVERYTHING IN THE INTERNAL STORAGE OF THE DEVICE!!
FAQ"
1.,)My phone blinks red and i cant boot into 9008 mode at all. What can i do?
A. From what ive expreniced, you need to take out the back and touch two test points on the g7 while connected to the pc with a tweezer.
from another thread :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2,) I keep getting shara failed, the firehose is in the right folder and the xml files as well. Everything is in the same folder.
A. There are two reasons why it may fail.
1 Make sure you install the drivers correctly.!! Windows 10 has driver signature enforcment enabled on default so you need to disable that and install the 9008 drivers. To check if your drivers are installed correctly open up Device manager via searching it in the windows bar then go into ports and make sure theres no question mark or an yellow exclamation (!) sign next to it. If there is you have you disable signature enforcement and install the drivers manually. To do that you can google it cause theres a bunch of ways to do it.
2. if the drivers are installed correctly then you should try two things. One run it as admin and check if you can open up parition manager or load the files. and two is to reboot into edl mode by holding down Vol - and then power then once it turns off and on again at the lg logo, hold it down and reboot into edl mode again.
3.Red case:
You may have the red case cause you locked your bootloader by accident or you never unlocked it or something happened. Just use this guide to flash the abl file https://forum.xda-developers.com/lg-g7-thinq/how-to/how-to-partitions-flash-abl-t-mo-t4051249 then do fastboot oem unlock then flash back the abl for your android verison.
Requirments:
-A computer of course
-USB cable to connect your phone to the pc
-This oreo firmware https://lg-firmwares.com/downloads-file/17341/G710ULM11g_01_NAO_US_OP_1112.kdz
-The unbrick files from here: https://drive.google.com/open?id=1gozwGTc8BT1w_gb230GUT4RP_Mwe5fz4
-KDZ Tools: https://github.com/ANEP-ET/kdztools/archive/master.zip
-Python installed :https://www.python.org/downloads/
Steps:
AA. You can download this, extract them and skip steps 1, and 5-9
https://drive.google.com/file/d/19JBomkFdFglUqFhF3jFsJ-H2WJN4Dwp0/view?usp=sharing Thanks to @avilav
BB. You can do it your self too ill leave them in the steps
1. Download and install python
PYTHON INSTALL STEPS:
a. Download and install python 2.7
b.Download and install C++ Compiler for python2.7: https://www.microsoft.com/en-us/download/details.aspx?id=44266
c. Download and install thus redistruble
https://www.microsoft.com/en-us/download/details.aspx?id=48145
D. After everything is done installing open C:/Python2.7/Scripts folder and right click and open powershell
E. Type CMD then enter and then put
Code:
pip install zstandard
F. After thats done continue with the next steps. And you can close that window
2, Download all the files above and extract them into one folder. Make sure to extract everything INSIDE the kdztools folder.
3. Run the qpst file you extracted and install it
4. A.If your phone is already in 9008 mode and stuck there make sure to hold down and power for at least 10-20 seconds while connected to your pc and should reboot back to it.
B. If it doesnt boot into download mode or android at all but theres a picture or bootlooping or at fastboot mode etc... or at the white lg logo: https://www.youtube.com/watch?v=__MY0qB1G8c use this tutorial to boot into 9008 mode. Plug your device into the computer, then hold power then down the turn it off and then quicky let go of power and press and hold power then rapidly press the vol+ button and you should be at a black screen and should be in 9008 mode. To check: Open up device manager and check ports and should say qualcomm 9008 mode. If it says something like qhubulk usb an theres an exclamation on it make sure to right click update drivers and search automatically on the internet. Otherwise youre gonna have to find the drivers your self online which isnt hard.
5. Once you confirm that you are there right click in the folder where you extracted everything open up Powershell or if you have it to set to command prompt open that.
6. In powershell type cmd and press enter.
7. Type:
Code:
unkdz.py -f G710ULM11g_01_NAO_US_OP_1112.kdz -x
then press enter
8. Wait a while and ignore the warning about offsets and stuff like that and dont close it yet.
9. After its done open up the kdz extracted folder and move the .dz file it generated back into where you extracted everything and then run this command in that same command prompt:
Code:
undz.py -f G71011g_01.dz -c
10. Wait while this also finishes, again ignore the warnings.
11. Place the rawprogramfiles0-6.xml's into the dzextracted folder it created this time
12. Now its time to flash, so open up qfil, you can just search it in the search bar on windows 10.
13. In the qfil window, select click configuration on top then firehouse configuration then make sure you change device type to UFS then click ok
14. Select Flat Build then in the programmer path select the prog_ufs_firehose_Sdm845_lge.elf file.
15. In the search path put the location of the dzextracted where all the files are extracted should be where theres a bunch of different bins
16. In the Rawprogram and Patch place click load xml then navigate to where the rawprogramfiles are (should be where dzextracted ) if you dont see it. If you do see it then shift then click Rawprogramfile0 then Rawprogramfile6 and it should select all of them. Then it should say select patch file. just click cancel on the patch file.
17. Click download and it should start flashing the files and wait till it done.
18 Hold power and down for 10-20s it should reboot and it should be able to boot android. It may restart once so it erases user data.
19. You should be able to boot into android now
If it doesnt boot:
You should be able to enter download mode now to flash fw with lgup
Lets Thank:
@Xsavi For finding the firehose file for sdm devices
@quickwshell for the rawprogram generator.
THANK YOU!!!!!!!!!!!!!!
Thank you thank you it worked with my lg g7 g710n
Hi there,
is there a way to recover my lost s/n number with that?
And many thanks for your work!
bongster said:
Hi there,
is there a way to recover my lost s/n number with that?
And many thanks for your work!
Click to expand...
Click to collapse
I can restore you S / N
motogvasyag said:
I can restore you S / N
Click to expand...
Click to collapse
Hi,
and how do you do that?
heres another link for the kdz if the lge link is slow
https://androidfilehost.com/?fid=4349826312261728482
Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?
Smouk said:
Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?
Click to expand...
Click to collapse
The python windiw where you opened the script folder
Smouk said:
Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?
Click to expand...
Click to collapse
It'z easier to use Cygwin. Download it and install. Open Cygwin
After the $ type pip install zstandard as zstd press enter it will find the .whl file it needs to run in python to extract any dz file your having problems with or other files you need for python.
Hi, @Awesomeslayerg, would your method wipe efs along with s/n or imei?
zacox123 said:
Hi, @Awesomeslayerg, would your method wipe efs along with s/n or imei?
Click to expand...
Click to collapse
Possibly, depends how you bricked it.
can anyone provide the extracted *11g kdz* files in a link. i managed to run evrything exept to extract the *G71011g_01.dz* in python. its says that the zstandard tool not found, and dosnt extract with LG_Firmware_Extract_v1.2.6.1 eather , idont know why.
or help me with the *prog_ufs_firehose_Sdm845_lge* and *rawprograms* for the *G710ULM21d_00_NAO_US_OP_0711.kdz* firmware to flash pie
thnks for your help frnds plz help me
ghani mal said:
can anyone provide the extracted *11g kdz* files in a link. i managed to run evrything exept to extract the *G71011g_01.dz* in python. its says that the zstandard tool not found, and dosnt extract with LG_Firmware_Extract_v1.2.6.1 eather , idont know why.
or help me with the *prog_ufs_firehose_Sdm845_lge* and *rawprograms* for the *G710ULM21d_00_NAO_US_OP_0711.kdz* firmware to flash pie
thnks for your help frnds plz help me
Click to expand...
Click to collapse
Cross flash to the G710ULM21d_00_NAO_US_OP_0711.kdz and use qfil to backup what you need. (Boot_a.img, Boot_b.img).
Here's a good guide to help you. It's from the of LG v40 forum but you can use it for your device.
https://forum.xda-developers.com/lg-v40/development/unlock-lg-v40-via-9008-root-t-mobile-t4042207
Remember all this is at your own risk!!! Good luck.
All the files you need are in the thread.
netookska05 said:
Cross flash to the G710ULM21d_00_NAO_US_OP_0711.kdz and use qfil to backup what you need. (Boot_a.img, Boot_b.img).
Here's a good guide to help you. It's from the of LG v40 forum but you can use it for your device.
https://forum.xda-developers.com/lg-v40/development/unlock-lg-v40-via-9008-root-t-mobile-t4042207
Remember all this is at your own risk!!! Good luck.
All the files you need are in the thread.
Click to expand...
Click to collapse
i want to flash 11g oreo rom and i need somone to provide 11g firmware extracted files; to flash it. i get erour when i flash the 21d firmare cause of *size does not match*, so if you can just provide a link to the 11g firmware extracted files in *androidfilehost* or *mega* i will be greatfull
thank you
ghani mal said:
i want to flash 11g oreo rom and i need somone to provide 11g firmware extracted files; to flash it. i get erour when i flash the 21d firmare cause of *size does not match*, so if you can just provide a link to the 11g firmware extracted files in *androidfilehost* or *mega* i will be greatfull
thank you
Click to expand...
Click to collapse
How are you flashing the 21d kdz?
netookska05 said:
How are you flashing the 21d kdz?
Click to expand...
Click to collapse
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.
ghani mal said:
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.
Click to expand...
Click to collapse
So your device is bricked? I can share the kdz and dz files. Let me get things together and I will provide a link.
ghani mal said:
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.
Click to expand...
Click to collapse
You cant use the 21d with the rawprogran files. These are only for that oreo kdz. You can flash them back to pie later.
Awesomeslayerg said:
You cant use the 21d with the rawprogran files. These are only for that oreo kdz. You can flash them back to pie later.
Click to expand...
Click to collapse
This is why i need oreo files, to flash them but i couldn't extract this firmware 11g , if you did extract it could you upload them for me, and thank you for your help.
netookska05 said:
So your device is bricked? I can share the kdz and dz files. Let me get things together and I will provide a link.
Click to expand...
Click to collapse
Thanks man for your help, i am waiting....