Hi,
First of all, I'm surprised that Lenovo Phab Plus has no forum section although Pahb 2 plus has.
Today I installed Xposed Alpha 3 and selected XPosed framework SDK for ARM 64 bit. It endded up to bootloop and worse I accidentally wiped my device without any backup (can't be worse than this).
I surfed the internet for almost a day and found few ROW ROMS on lenovo-forums which is russian website. Problem is it requires PC connection and my phone can not be read but in recovery mode. i.e. when I use:
Code:
adb devices
I got
Code:
1f82f24b recovery
I only get my phone recognized in recovery mode only since OS is wiped thanks to the naive I represent.
My question is:
1. Can anyone reach a zip ROM so I can install it directly from TWRP. I can transfer files to my phone when I'm in recovery mode as it is recognized as ADB Interface
2. Does ROW ROM require my phone to be in another mode other than recovery as I failed to get Download_with_partition.cmd to work although as I mentioned adb devices command returned my device ID and recovery word.
Your help is appreciated
Solution
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
New clean install guide needed
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Hazeriff said:
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Click to expand...
Click to collapse
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
wbadry said:
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
Click to expand...
Click to collapse
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Hazeriff said:
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Click to expand...
Click to collapse
Hmmm...
Anybody care for help?
Xda experts..??
Hazeriff.. this pop-up comes up when you are browsing, you can just ignore it.. Its just a false pop-up
Normally you dont get pop-up like these on Android
Hazeriff said:
Hmmm...
Anybody care for help?
Xda experts..??
Click to expand...
Click to collapse
Thanks dude!! You saved my butt. This is exactly what I needed and worked perfectly.
You are a legend!
wbadry said:
After posting the thread, I found that stock rom:
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
Hello to all.
unfortunately lacking all the commands of the txt file.
You can post all commands?
thank you
---------- Post added at 12:56 PM ---------- Previous post was at 12:44 PM ----------
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
please help me because i have brick my LENOVO PHAB PLUS
thanx it's work with me
frimware flashed
i need your help. its urgent. i am having lenovo phab plus but it is not working,
problem is os wiped, wrong flashing, even logo is not coming, if you have any solution for this please let me know on my email address
[email protected].
humble request. please
Thanks brother,I think i try 50+ sites and finally your one is working for me
bro can you help me to fix my phab plus
udhay441 said:
Thanks brother,I think i try 50+ sites and finally your one is working for me
Click to expand...
Click to collapse
bro can you help me to fix my phab plus i brick my phab plus, and everytime i do the fastboot it always say that tz.bmn is error can u help me
you guys, rock
Hi, thanks for the ROM file, unfortunately, even if everything goes well, my PB1-770M will stay in the bootlop
I do not even get into recovery, I do not even see the indication when the charger is connected. Perhaps the motherboard is damaged, right?
Flash official Rom for Lenovo push plus -770M
Firmware File
Search
Home☰
Lenovo Phab Plus PB1-770M
Home > Lenovo > Lenovo Phab Plus PB1-770M
On this page, you will find the official link to download Lenovo Phab Plus PB1-770M Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.
Download Lenovo Phab Plus PB1-770M Stock Firmware (flash file)
File Name: Lenovo_Phab_Plus_PB1-770M_USR_S000169_151229.zip
File Size: 2 GB
How to Flash: Follow Tutorial
Firmware Link: Click here to Start Download
Download Firmware
Download Flash Tool
Download USB Driver
For PC Software
How to Flash
Step 1: Download and extract the Lenovo Phab Plus PB1-770M stock firmware package on your computer.
Step 2: After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step).
Step 4: Follow the How-to Flash Manual to Flash the Firmware on your Lenovo Phab Plus PB1-770M Device.
Follow Detailed Guidelines
Readme Once:
[*] Take a Backup: If you are going to flash the above Firmware on your Lenovo Phab Plus PB1-770M device, then take a backup of everything as because your personal data will be deleted after flashing the stock firmware.
[*] The firmware shared on this page is officially released by the company and helps you to recovery your device if you ever got bootloop, software error, update error, hanging and dead issue.
COMMENTS
Site Links
Donate
Privacy Policy
Contact
Trending
Alcatel Firmware
Samsung Firmware
Vivo Firmware
Connect
RSS
Facebook
Made with ♥ in Spain | Powered by BlueHost
Copyright © 2014-2018 Firmware File. All Rights Reserved.
low internal memory after flafsh lenovo pb1-770m
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
mazvir said:
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
Click to expand...
Click to collapse
I had the same problem and I solved it by installing TWRP and resizing /data partition via it.
Downloaded the above FW successfully but when I followed the step-by-step guide, I got this error message:
==================
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_1
60420_ROW\SW> adb reboot bootloader
adb : The term 'adb' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At line:1 char:1
+ adb reboot bootloader
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Suggestion [3,General]: The command adb was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: ".\adb". See "get-help about_Command_Precedence" for more details.
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW>
=============================
I am on Windows 10 and it's Windows Power Shell that popped up.
Any help, please?
Thank you.
This is good I have Lenovo PB1-770N and work for me just I connect my phone and open the zip then I go to SW folder and press "Download.cmd " and ebriting go by self,lol them flash by self we don't need do anything lol. Thanks for the good rom.
NOTE: don't turn off your phone just connect and press " Download.cmd" file
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specs
[*]Google it before posting here.
[*]Please post any guides and/or tutorials directly onto the forum, rather than links, otherwise this thread will be closed by the Moderator.
Click to expand...
Click to collapse
Rooting for 8GB Version
Procedure:
1. Download the Framaroot application and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
[ROMs]
Please do not flash the firmware that is not meant for your phone. Flash only 4gb to 4gb and 8Gb to 8Gb
Auxus Nuclea N1 Stock Firmware
NEW
Final Version - 11-Dec-2013 - [Flash with SPFlash Tools]
Click to expand...
Click to collapse
OLD ROMs
Firmware Update (Intermediate V1) 18-Nov-/2013 [Flash with spflash Tools]
NucleaN1_FirmwareUpdate_V1_CWM.zip
Click Here - - [09/Sep/2013] [Flash with SPFlash Tools]
CWM Zip Download from herehttp://d-h.st/b3r
8GB version -
Click Here - [Flash with SPFlash Tools]
Custom ROMs
Click HERE
How to Flash Stock ROM using SP Flash Tools?
1) Unzip the ROM folder
2) Install the drivers and open SP Flash Tools..
Check the below post with images, if you are not sure whether drivers are installed or not.
If you face this problem, then try Firmware upgrade and connect the phone..
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING PATCH using SP Flash Tool(Single Files)
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone without the battery...
7)It will get Flashed...[/COLOR]
[Recovery]
1) Nuclea N1 Stock Recovery Click Here
2) TWRP Recovery- Click HereThanks to Kumar abhishek
3) CWMRecovery 6.0.3.3 Click Here or Click Here Thanks to C3C076
Procedure to Flash Recovery.
1) Download Mobile uncle tools from play store
2) Place the downloaded recovery.img in your sdcard
3) Open Mobile uncle tools
4) Select 'update recovery' and Click on the recovery.img
5) Reboot
adb method: For advance users:
---------------------------------------------------
Make sure you have all the drivers for your phone installed on your computer.
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
.
How to Backup ur complete ROM
1. In CWM Recovery mode, select Backup and Restore
2. Select Backup
3. Wait till it finishes (May take upto 10 minutes)
How to restore ur backed up ROM from SD card
1. Go to CWM Recovery, select backup and restore
2. Select Restore
3. select the folder in date format (Folder name indicates the time and date when ur backup was created}
4. Wait till it finishes (May take upto 10-15 minutes)
Special Guides for Newbies to get Started
Everything you need to know about Clockworkmod Recovery
How to setup ADB and Fastboot properly
5 Things Every Android user should do
24 Apps Every Android User Must Install
5 Things to know before performing any Android tweak
Thanks to Driodiser
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:
Extend your storage on Nuclea N1
[Extend your storage on Nuclea N1] - Thanks to @kailashnj
Follow the instructions in the post HERE
How to enter into Recovery - Nuclea N1 :-
Code:
[LIST=1]
[*]Turn OFF your phone.
[*]Press & hold Vol(+) button and Power button for 12 seconds.
[B]Stock Recovery[/B]
[*]You will see a laid-down Android symbol with 'No command' message below it. Press the power button once.
[*]You will enter into menu 'Android System Recovery'
[*]Press Vol(-) to roll over options.
[*]Press Vol(+) button to select.
[*]DONE!
[/LIST]
Another options if you are facing trouble going to recovery:
Code:
1. Install Mobile Uncle tool
2. Reboot recovery.
MTK6589 Drivers
Universal Pdanet drivers Click Here
Follow this guide Here
Tools
MTK Android PC Sync Tool V2.1233.1 Click Here
SN_Write_tool_exe_v2.1132.0.rar - 8.27 MB
Guide Here
Driver_Auto_Installer_v1.1236.00 Click here
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.
Click to expand...
Click to collapse
How to dump stock recovery image using SP Flash Tool
1) Download and install USB VCOM Driver
2) Download, extract and launch SP Flash Tool
3) Use "Scatter-loading" button to load attached scatter file: MT6589_Android_scatter_emmc.txt
4) Download stock recovery image and place inside the ROM folder. Then select only RECOVERY.
5) Turn off your phone. Make sure USB cable is unplugged. Wait until vibrator indicates it's turned off
6) Click Download button in SP Flash tool, confirm warning complaining about not all files being selected
7) Connect your phone and wait for the flash process to finish (indicated by window with green circle)
8) Unplug USB cable. Hold down Volume+ while turning your phone on to boot into recovery
Click to expand...
Click to collapse
Backing up your IMEI
Different Methods are available for this.
1) Use any RootExplorer to copy file /data/nvram/md/NVRAM/NVD_IMEI/MPOB_001 to your external SD card. (or if that folder does not exists, try /nvram/md/NVRAM/NVD_IMEI/MPOB_001). It is good to backup the entire folder /data/nvram/md/NVRAM.
2) Back up using Mobile Uncle utility. Click on Mobileuncle Tools --> Click IMEI Backup Restore (MTK) --> Backup/Restore
Restore your IMEI
Code:
1- Open Mobile Uncle Tools.
2- Goto Engineer Mode
3- Select Engineer mode[MTK]
4- Under Connectivity Tab go to CDS information
5- Select Radio Information
6- Select Phone1 (for the first imei)
7- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number)
8- hit send command
9- You will / may get a confirmation that "sent to mSend".
10-Now come back and select “Phone2?
11-at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number)
12-Then just reboot the phone.
13- Dial ” *#06#” to Check Imei.
Factory ROM Backup for MT65xx via MTK Droid Root & Tools For BackUp & Unbrick
It's tested and working...
How to install ADB USB driver in window 7
use this method also in window xp,if any driver not install
Google USB Driver Rev 7 ( ADB driver )
inside three dll file driver
1-WdfCoInstaller01009.dll
2-winusbcoinstaller2.dll
3-WUDFUpdate_01009.dll
link
Click Here
Before use it is necessary to check that:
adb drivers are installed. Check device manager--> unknown devices. ADB Drivers attached.
Now the Tool
Credits: umesh gaba
[MOD][4.1 4.2] Extend Phone Storage 1.5, 2.5GB A116 (Other MT6589 Devices on request)
[Solution] NVRAM WARNING: Err = 0x10
Download this zip Click Here
Prerequisites:
You have to backup IMEI of your phone (both sim slot).
Step 1 - Extract the WiFi Fix files and place them in a folder on your memory card
Step 2 - Open Root Explorer
Step 3 - Click on Mount R/W
Step 4 - Click on data
Step 5 - Scroll down to the folder named nvram
Step 6 - Open APCFG folder
Step 7 - Open APRDEB folder
Step 8 - Delete the WIFI and WIFI_CUSTOM files
Step 9 - Now copy/move the files on your sdcard to data/nvram/APCFG/APRDEB and Paste
Step 10 - After pasting both the files, close Root Explorer and REBOOT your phone.
Here is another method Click Here
The bad news is.
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
can you provide a review of the phone?
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Yes, I am in batch II.
dhavalg said:
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
Click to expand...
Click to collapse
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Hi Guys,
Even I have bought this phone and awaiting delivery, I was promised by 4th Aug. Lets see. The specs of this phone seems to be great other than the 4GB storage. I hope that apps2sd works really fine and I am able to store all my game data on the SD card. Wanted to know more info of this phone and the rom.
Regards,
Kailash
can't decide what to buy
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Thanks...
akashavel said:
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Click to expand...
Click to collapse
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
:victory: Yesss... XDA Thread for Auxus Nuclea.. feeling exciting.. Best Wishes, Guy.. :good::good:
dhavalg said:
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
Click to expand...
Click to collapse
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
I prefer to use Titanium Backup to freeze unwanted app rather to uninstall.. this app will save lots of RAM..
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
ashok20205 said:
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Click to expand...
Click to collapse
Yes, We can install Custom ROMs (Themed ROMs or Ported ROMs). But, with kernel sources a lot of development can happen. :good:
akashavel said:
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
Click to expand...
Click to collapse
No need to wait for a Custom ROM. You can try One-Power-guard app, Clean master and Greenify app's.
Chris s5830i said:
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
Click to expand...
Click to collapse
This mobile is good at it price with the spec's. Even Micromax is not providing kernel sources. Also, compared to the support of Micromax, iBerry is doing best.
abhiek bist said:
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Click to expand...
Click to collapse
Check the facebook page. Then you can decide
Can you post link for CWM for nuclea N1
can you help me with the link for CWM
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
I have followed your instructions to the word. The YGDP download program keeps getting stuck after pressing 'Apply' after selecting the CPB file and version.
Moreover, the drivers that you have given are ADB drivers. I have installed them prior to all this. But my s5+ still doesn't get detected after I connect it to my PC without the battery. It says the driver installation failed. I forgot what was the device name that was being shown.
Could you please help me out. I have accidentally deleted certain system applications and need to get them back. Thanks.
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
dogmatism said:
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
Click to expand...
Click to collapse
thanks. will try that. But apart from that the flashing program has an issue as well. I'm running it on a 64 bit win 7 machine and I'm opening it with admin rights as well. also I need to open it in compatibility mode for windows XP. after hitting apply on the ROM selection screen it freezes. I guess that has nothing to do with the drivers as the phone isn't even connected yet.
any idea what's causing this?
Thanks for such an informative tutorial. I have this phone. From where can I download Custom ROMs like Cyanogenmod for it? Btw, are you getting poor camera quality by any chance?
Hats off sir
Thanks Sir Thank You Very Very Much You Save My Money! Thanks sir thank you!
ROM
when will we get kitkat ROM for titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
hello frnd i have spice coolpad 2 mi 496 model. the ygdp software is compatible with this device. my question is only that if my device will brick in future than can i fix it with this software i have both ygdp software as well stock rom of my device in cpb plz tell me
karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...:crying:
Help !!! Boot problem of karbonn titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
This is what happened.....
I um... somehow changed the fonts of my android system to segoe ui through rom toolkit lite... rebooted it.......
now, i'm only able to boot into recovery..... i.e. when i try to boot normally, it just shows the loading screen forever..
i have android system recovery 3e in my karbonn titanium s5 plus...
tried the above method........... but no use.... it kept showing some checksum error.....
i cant use adb too except for adb sideload.... which i cant as i have damn less internal memory free space
what do i do ?
p.s send any solution to this to my email :
[email protected]
ps. if possible, could you send me some roms and recoveries compatible with this phone ??? (Karbonn Titanium S5 Plus)
i searched the internet and found nothing.... if anybody happens to stumble over something for this, please send it to me. thanks in advance.
Unhappy karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...
Click to expand...
Click to collapse
check for your device model from coolpad and download the rom from coolpad romer accordingly...
check for the roms from coolpad romer in google drive
edit 2:
thanks to Mr Shrikar Galgali who sent me the rom from coolpad romer
use this link for the original rom ....
https://tr.im/20c3b
he also sent me a few other ROMs..
Here are links for ROMs compatible with karbonn titanium s5 plus :
Sony xperia z:
https://www.dropbox.com/s/e8sq7s60de82mvl/Xperia_Z_Karbonn_S5_Plus.zip
Sony xperia z v2:
https://tr.im/ca47d
Miui :
http://www.needrom.com/wp-content/uploads/2014/03/miui_7295c_4.3.7_2c5837e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
Note : The above posted links for roms are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Eg: You need to log in to your google account to download the Samsung Galaxy S5 ROM and the Xperia Z v2 ROM
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
edit 3:
Yep. My phone is fixed....
Had to go to the service center though....
anyway.....
For all those who damaged their System UI:
Here are the SystemUI.apk and the SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyuba/Karbonn_Titanium_S5_Plus_Syste.html
Hope it helps !
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
Here is the cwmrecovery.img file of karbonn titanium s5 plus, for all those who might need it.
tr.im/RWOT
( beware, the above link is not tried and tested ! )
hope it helps !
edit 4:
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive... I shall be uploading the MIUI v5 ROM to Google Drive within the next few weeks...
karbonn titanium x
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
uinod3 said:
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
Click to expand...
Click to collapse
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
i guess so...
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
well, if you have any custom recovery images, you could do it through fastboot ( fastboot flash recovery nameofrecovery.img )
else, if you have flashable recovery zip files, you could do it through adb sideload in recovery...
try twrp recovery... touch based recoveries are good for karbonn devices
take a backup of your current rom ( and recovery if possible ) first...
make sure that you know any karbonn service centre near you who can fix your phone if it gets bricked.
( i'm telling you so because when my karbonn titanium s5 plus bricked, it took a week and a half to get the phone serviced at the service centre. )
find some roms compatible with your device, and make sure you dont install new fonts or anything like that. rooting is okay...
try this link for karbonn roms
"goo .gl/ p0QK1m"
(remove the quotes and no spaces)
oh, and does anybody have an idea of creating a one-for-all rom that would work on any android device, be it tablet or smartphone ?
it could have the most basic features and could be based on android 4.4 kitkat....
it's purpose is mainly for backup... just in case no other rom is compatible with a certain phone and you can't find the stock rom anywhere...
please reply to my gmail id if you have any idea of doing so....
rajju 3004 @ gmail . com
(remove the quotes and no spaces)
Note: Never ever change or add any new fonts to a Karbonn device...
can u give me link of custom roms for titanium s5 plus.
read my post!
anmolmatharu said:
can u give me link of custom roms for titanium s5 plus.
Click to expand...
Click to collapse
see my post on the first page !
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
titanium x stock rom
uinod3 said:
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
Click to expand...
Click to collapse
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
rjt.rockx said:
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
Click to expand...
Click to collapse
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
try this
uinod3 said:
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
Click to expand...
Click to collapse
try this :
tr.im/MMLf
it is not a rom which can be flashed through recovery...
see this for instructions
tr.im/MMUk
hope it helps !
Scatter file.
cybercrawler had asked for the scatter file of Karbonn titanium s5 plus.
well, here it is, attached to this post.
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
baskye said:
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
Click to expand...
Click to collapse
I am glad to see first person who rooted with the help of my tutorial and files. That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. Will be around for more developement and roms.
Success!
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Using the note for about 2weeks. Rooted successfully. Titanium backup is not working properly. Any solution for it.
Also the network refresh is poor. So network switching is very slow and many times have to manually do refresh or reboot.
latest twrp recovery
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
flashing the preloader is not necessary though is it?
Yes it is not necessary
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
mojahun said:
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with
"Searching drivers for YunOS system"
and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like
"YunOS ACB Interface"
Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)
So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.
baskye said:
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
Click to expand...
Click to collapse
Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode.
Ito_ said:
flashing the preloader is not necessary though is it?
Click to expand...
Click to collapse
No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms
sandeep101 said:
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
Click to expand...
Click to collapse
YEAH! I am always around in XDA, for the phone in my hand Thanks for appreciation
SCATTER file and Recovery for two more clone models.
Hi A L L!!!
Posted SCATTER file and Recovery for two more clone models.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
Choose wisely.
Nothing happening
cmahendra said:
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
Click to expand...
Click to collapse
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Techminator said:
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Click to expand...
Click to collapse
Seems drivers are not properly installed. These are new drivers by iBerry.
1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.
Hope this helps and inform if works.
PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.
Rooted!
cmahendra said:
Seems drivers are not properly installed. These are new drivers by iBerry.
Click to expand...
Click to collapse
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Techminator said:
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Click to expand...
Click to collapse
I dont use or recommend Xposed FW. You can use as per your requirement. Works fine.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
Yes, flip cover by iBerry is costly and even I am also looking for low-cost option.
falcon.prj said:
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Click to expand...
Click to collapse
For icons size to change use any other launcher, like google now or nova or any other you want.
Move Titanium App to internal memory or install Link2SD, check settings and then install Titanium Backup. plz google for more info on titanium.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
baskye said:
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
Click to expand...
Click to collapse
Thanks a lot for this good tip/method. +1 plz post link to exact file/version.
Here is the download link
http://download.clockworkmod.com/superuser/superuser.zip
Does not work
This method does not work after I download and flash with the latest firmware (13 Oct 2014) from iBerry site.
DISCONTINUED - Left for research and archive purposes.
After much hardwork @codelover and I are pleased to release both stock rom as well as TWRP 2.8.6.0
for the 2 known variants v31 and v38. Please make sure you download and flash for your specific variant. Check faq if you do not know which variant you have.
REQUIRED FOR BOTH VARIANTS:
Windows XP/Vista/7/8/8.1/10TP 32bit or 64bit
SPFT (Windows Version) “linux version coming soon”
Correct Scatter File
Preloader Drivers (if you do not know how to install manually go here)
ADB
A Brain
Usage:
For flashing either pre-rooted Rom and/or TWRP you will need spft+scatter file. It is imperative that you make sure that if you got a v31 you only uses v31 files not v38. Same for the v38 users only use v38 files. You have been warned.
Click to expand...
Click to collapse
Flashing Rom:
Make sure
Run the file flash_tool.exe
Click on scatter-loading and select your MT8127_Android_scatter_RCA_Vx.txt file
Make sure all listed files are checked and if any isn't double click on it and select the appropriate file
Leave settings as Download Only “if working tab Format All + Download "if wont boot' then hit the Download button
Make sure your tablet is completely switched off then connect it to your PC and the flashing process will commence immediately.
Once it's done, you'll see the tick sign below and that's all. Reboot your device and setup your device afresh.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing TWRP:
Same as above except only check mark recovery and select “recovery_twrp2860_vXX.img” and nothing else then proceed.
How to ROOT:
*With stock recovery: Kingo
*With TWRP: SuperSu
DOWNLOADS:
(V31.0 USERS ONLY)
Pre-Rooted Stock ROM (scatter file included in zip and attached below)
TWRP 2.8.6.0 (scatter file included in zip and attached below)
EDIT: TOUCH FOR v31 TWRP IS MISALIGNED FIX IN PROGRESS. LINK REMOVED UNTIL THEN
(V38-V1.8.0 USERS ONLY)
Pre-Rooted Stock ROM (scatter file included in zip and attached below) (Currently being fixed sorry for the issues)
TWRP 2.8.6.0 (scatter file included in zip and attached below) (Currently being fixed sorry for the issues)
NOTICE:
Please keep thread clean and DO NOT ask things others have asked already as you will be ignored. If you do have a honest question and have a working knowledge of android. I would be glad to assist you the best I can. If you are noob and messed something up DO NOT ask for help. Meaning basics of knowing adb,logcat, installing drivers, and so forth. Sorry if you are a noob but please try to understand that things we may ask of your will require this and becomes too much of a slow down if we have to guide you thur everything.
Click to expand...
Click to collapse
CREDITS:
http://twrp.me/ – @Dees_Troy & his team mates, for TWRP Recovery
@codelover - For being an awesome programmer, dev and person!
@TripFX - For being an awesome Tester, v38 rom dump and Dev Machine Hoster
@synius - For v31 rom dump and tester
@nathanski - Tester
@acejay3200 – Being a nice lab rat with knowing i may not be able to make a recovery for you or even brick your working device and not being rude..
Others I may have missed
Discontinued
Faq:
Question: How do I know which variant I have?
Ansere:
Method #1
From a booted android, goto Settings > About > Build number
You should see something like this.
RCT6773W22-ANDROID4.4.2-3101-V38-V1.8.0
Method #2 (Better & more accurate)
For this your device must be rooted & already have USB Debugging Mode enabled.
Make sure adb.exe has been installed on your system (computer).
Execute the following adb command:
Code:
adb shell
su
cat /proc/cmdline
then search for ‘lcm’ text in the output:
If lcm=cpt_clap070wp03xg_lvds < you need to use v31 files
If lcm=1-lxjc070whm270_18a_rgb < you need to use v38 files
Question: What if I dont remember which variant I have and can’t access adb?
Ansere: If this is the case we will need to use SP Flash Tool to help identify your variant.
Open SF Flash Tool, load V38 scatter and switch to ‘Read Back’ tab. Clear all then click Add,
Click the new item & change the output file name from ROM_0 to ROM.txt,
edit the readback address as below:
Start Address: 0x9000000 / Length: 0x1000
Then press “Read back” button, now connect the tab while powered off.
When it’s done, open the file with wordpad and check if you have “ANDROID” at the beginning of the file, if your answer is yes then you have V38, otherwise use V31.
'pleas take with a lol"
edited off bs bulk
Is anyone else having problems with DL link.
nathanski said:
but if you cant test and flash the wrong one re-flash other,,,
because if its not one its the other ....
Click to expand...
Click to collapse
read full faq
leetree2001 said:
Is anyone else having problems with DL link.
Click to expand...
Click to collapse
just test download links in on my pc all download fine Firefox 37.0.1 Win7 x64 all work
no touch in twrp volume keys do nothing power button shuts off tablet boot into android tablet works fine i am trying to make a backup so i dont have to flash everything again
edited off more bloat
i flashed twrp with its own scatter had no touch then with the 4.3 scatter that fixed my tablet now touch works but the buttons dont lineup
acejay3200 said:
i flashed twrp with its own scatter had no touch then with the 4.3 scatter that fixed my tablet now touch works but the buttons dont lineup
Click to expand...
Click to collapse
A correction to V31 in on its way
V38 has good reply on touch working well, small snag regarding to internal storage reported,,,
Well I got it downloaded, and it worked great for me, touch Worked great for me. I did a ful
I backup and all buttons seem to respond to touch. I used twrp easy magic's unpack, repack to install it, thanks you guys, and girl's for you're hard work.
gr8 t2o hear good results, thank you,,,
nathanski said:
Great to hear good results, what file are you reporting success with, if I may ask,,,
I stay on my tablet like most of my time when I'm not working or ect,ect when I stop using it as heavily I am going to install twrp I guess, just haven't made time as the tablet is basically my main device
Click to expand...
Click to collapse
Twrp 2.8.6 v38,the only problem I found is internal sdcard not showing up in file manager. But external sdcard does,
twrp. installer.exe http://forum.xda-developers.com/devdb/project/dl/?id=10082,, its a option
TripFX said:
Faq:
Question: How do I know which variant I have?
Method #2 (Better & more accurate)
For this your device must be rooted & already have USB Debugging Mode enabled.
Make sure adb.exe has been installed on your system (computer).
Execute the following adb command:
Code:
adb shell
su
cat /proc/cmdline
then search for ‘lcm’ text in the output:
If lcm=cpt_clap070wp03xg_lvds < you need to use v31 files
If lcm=1-lxjc070whm270_18a_rgb < you need to use v38 files
Click to expand...
Click to collapse
Note: Watch your tablet as you're doing this. You may have to grant su permissions on the tablet after executing the "su" command in adb.
I tryed using sp flash tool to flash but I couldn't get it to work is there another flash tool I could use thx
edited off bulk,
Edited.
nathanski said:
Yeah there is, in the link I have up showing time stamp 3:23
---------- Post added at 09:18 PM ---------- Previous post was at 09:16 PM ----------
Did you have to copy the whole FAQ in a simple reply
Click to expand...
Click to collapse
Thx for the help it won't boot into recovery it comes on I just can't get into recovery
mike9976 said:
Thx for the help it won't boot into recovery it comes on I just can't get into recovery
Click to expand...
Click to collapse
I can't say as to why but you do need the self education one can learn about how to use spflash tool,, seeing as that's the way that I know that's the first info I could offer ,,, you should get your version information first, then download your ROM because the scatter file that had reports of best results are in the full firmware, and you then need to know that the reset button will bring up a driver install but it happens fast to catch this you need the device manager in windows open, plug the rct in then press reset with a tothpick or other small pin ect,, the device shows up with a sound chimes on windows, right click the new device in the USB group and install using the hosted driver,,, now to the spflash tool its self load the scatter in the full ROM related to the vershion you have and then only check recovery,,, and find the twrp.IMG in you downloads and use only the download option in the spflashtools,, and click download then Right after hit reset on the back of the tablet,,, it can be done ,,,, even for the new people wanting to learn,,, regarding the twrp,installer.exe I linked to, I have no knowledge it was only reported to be a full success by another user before you so I wanted to offer a fast way for others to find it ,, so I linked to the .exe,,, and lastly ON MY TABLET I HAVE TO BE ON A CHARGER TO LAUNCH RECOVERY AT BOOT USING VOLUME KEY,..and you can download a root reboot apk that will boot from inside android directly into recovery,, maybe I helped,,,, p.s. another great thing the full ROM offers is the original OEM recovery.. Pleas do try to learn. As always i do wish every one the best
---------- Post added at 02:45 AM ---------- Previous post was at 02:38 AM ----------
best regards to you @TigerG8
Guys, please check your phone version before downloading the toolkit - dont use 2.19 toolkit on 2.21 phone-version! I don't know why everyone is killing their phone right now! This is not an easy-to-do tutorial! It requires time and at least a bit knowledge. Please read this carefully - use google for the most important words and start after understanding everything! I won't help via PM when you 'bricked' your phone!
Welcome to the WIP Tutorial "How to use GApps on the Nubia X"!
Keep in mind this is a workaround and should not be the official way in how to do it! Im not taking any responsibility if anything goes horribly wrong
Understood? Let's go then!
STEP 1 - Preparation
Click to expand...
Click to collapse
We need to prepare the phone now.
Note: This is mandatory for the rest to work
Unlock the Developer options by going to Settings ►About phone ►Rapidly tapping on the "Build number" field until the phone returns "You are an developer".
Go to Settings ► Other system settings ►Developer options - and change the state of "OEM Unlocking" to ON.
Again in Settings ► Other system settings ►Developer options enable "USB Debugging"
Now, you need to prepare your PC (in short: install adb). Please Google this on your own ("How to install adb on {your OS}").
Alright, we are done with the phone for now.
Let's go to the downloads!
STEP 2 - Downloads
Click to expand...
Click to collapse
nubia-root-toolkit V211 (Actually the magic behind everything). Source: 百度云, pw: 7m9s - by 绯色玻璃
nubia-root-toolkit V219 (Actually the magic behind everything). Source: 百度云, pw: 7m9s - by 绯色玻璃
Link2SD (in order to convert to system later)
GoogleFrameworkInstaller
Great job so far.
Now, we can start doing dev-things !
STEP 3 - Let the magic happen! (ROOT)
Click to expand...
Click to collapse
Note: this is the part where we change system files. Please continue at your own risk! If you don't know what a root is you should better not do that.
Note: I don't own this toolkit. The source is linked above. I would recommend translating the original page source and reading throgh it. Source
Alrighty then? Damn, ur edgy.
Plug in your phone and wait until it gets recognized by your OS.
Extract the "nubia-root.zip", go into nubia-Root ► nubia-X, and run the "nubia-X_Root-V211.exe" with admin priv.
We don't understand nothing, because it is a chinese source... But according to the original thread, close (X) the first window that appears.
You will now see a window with "(Random text) ROOT"-Button on the right. After you click it, you'll get a log output of what your phone is doing via ADB.
Finished? You will see "Success" at the bottom including some weird characters. Lmao #chineseprograms.
What happened right now?
Well your phone is rooted. The program archived this by flashing a partition on your phone with adb.
First, it unlocked it (see my dev thread for more infos) and after that it flashed the bootimage. In short.
Now boot back into your phone and continue your journey!
STEP 4 - Installing apks on the phone
Click to expand...
Click to collapse
Remember all these apk's you have downloaded before?
We are going to use them now.
Make sure your phone is still plugged in. We are using 'adb' now so open up a command-prompt / powershell / bash.
The syntax is the following: "adb install NameOfTheFile.apk" - do this with every downloaded apk. Example: "adb install /home/user/link2sd.apk".
STEP 5 - Install GApps
Click to expand...
Click to collapse
Now the fun part.
We are going to install the required Google Apps as a normal user.
IMPORTANT: Don't run any of the Google Apps after you see them on your phone. I know you are hyped but its not time to do this right now.
Run the App called "谷歌安装器" (or the app with a playstore-like symbol). You will see a screen with chinese text and a blue button.
Click the blue button - the app will now download every GApp you need. After every download you will be prompted to install the app - confirm this and deny any Nubia tips for "hey you can download a newer app". Just install it like a normal app.
If you encounter the "unknown source"-error, follow the instructions on the device (or google "how to enable install apps from unknown sources").
Thats it! Wohoo.
Well no.
Please restart your phone, before continue!
STEP 6 - Make GApps powerful (using Link2SD)
Click to expand...
Click to collapse
Well I didn't found a better way as making the GApps System right now.
Because we don't have access to TWRP (right now ;D), this is the way to go.
I assume you have Link2SD installed (if not, go to Step 4 and install Link2SD!).
Open up Link2SD and click on the three dots located in the upper right hand corner.
Click "Search" and type in "Google". You will see a bunch of applications there but we only care about some of them.
We will use the following procedure: Click on the searchresult ► Click on the three dots ► "Convert to system app" ► Confirm. (It might be called somewhat with "system" in it, if you dont find it).
Do this procedure with the following apps: "Google Service Framework", "Google Play Store", "Google Play Service", "Google Contacts Sync", "Google Calendar Sync" and "Google Account Manager".
Done? Restart your device again. (You can do that by clicking on the side-menu of Link2SD ► Reboot ► Reboot.
Step 7 - Enjoy!
Click to expand...
Click to collapse
Well, you are an official hacker now... Well not really.
But you did something which is not that easy.
If you want to learn more or if you have any questions left contact me on discord (My ID: Captain Teemo#9394).
And if you are happy with the result, consider my time writing this for you and drop me a coffee: https://paypal.me/THeckel - your awesome!
Thanks for reading and enjoy your nubia - as you want!
@Teeemoo, most of the people will do that for first time. It will be good to include:
BE SURE THAT THE PHONE VERSION MATCHES THE VERSION OF THE SOFTWARE!
The described process up it's only of v2.11. For v2.19 and up you need the corresponding tool.
If you ignore that, you risk to soft brick your phone.
1. Magisk and Xposit will be loaded on the phone - do not play at any cost with them (upgrade or stuff). That will put your phone on a boot loop. I know it form personal experience. To fix that it's a bit tricky.
2. When you start the root - be sure that your phone is unlocked. Watch it when it ask permissions.
3. Moving apps with Link2SD can be tricky as well. The app will be moved to /system partition and it's limited. Also if you promote and demote app, doesn't mean that you'll get the same space on /system again. There is option to do that, but need some expertise level.
4. Abut when the GApps to be set at system - after the reboot or before it - I'm not that sure. For me was working the option only after the root. For that reason, preload the Link2SD in advance.
5. v2.19 root reports a virus inside. If you're afraid to open it, then use a sandbox for that purpose (shade sandbox is pretty ok for that purpose).
this is awesome, thank you so much. Let's get you some coffee
frankstoy said:
this is awesome, thank you so much. Let's get you some coffee
Click to expand...
Click to collapse
Great! You are the reason why programming and doing something for a community is so fun!
Keep it up - you're awesome!
Thanks!
root issues
Hi
thank you to make a tutorial about rooting the phone i did everything you said in step 1 and 2 but iv'e had a issues with the reboot this is the picture of my phone right now do i need to reinstall the factory firmware ? thank you in advance
Hugo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 11:10 PM ---------- Previous post was at 11:00 PM ----------
I tried flashing the new software for google play service and i got an error
your device is corrupt
I followed the steps to the tutorial and failed anyone can help me reload oem software on the phone thanks
Wait, what?
You got in the boot-loop?
No why. I told you what to NOT to do
PM to explain you how to recover.
nuvocell said:
Hi
thank you to make a tutorial about rooting the phone i did everything you said in step 1 and 2 but iv'e had a issues with the reboot this is the picture of my phone right now do i need to reinstall the factory firmware ? thank you in advance
Hugo
---------- Post added at 11:10 PM ---------- Previous post was at 11:00 PM ----------
I tried flashing the new software for google play service and i got an error
your device is corrupt
I followed the steps to the tutorial and failed anyone can help me reload oem software on the phone thanks
Click to expand...
Click to collapse
Hey hugo, did you update the phone before doing the tutorial?
The picture is not loading, btw. You might upload it to an image uploader and send the link here.
Here you can download the official rom
Hey,
I did everything but at the end when i open the play store i just got an endless loading !!
Pls help <3
---------- Post added at 11:51 PM ---------- Previous post was at 11:45 PM ----------
q8falcon said:
Hey,
I did everything but at the end when i open the play store i just got an endless loading !!
Pls help <3
Click to expand...
Click to collapse
Solved : passed "Google play services" in "Link2SD" by mistake.
Thanks for the great job :good::good::good:
Thanks for the quick reply , i did not have an update to do on the phone, i used the chinese software to root first like mentionned in the tutporial , then phone went into device corrupted ,
now im trying to install the oem firmware on the phone im trying with smart flash tool , but in the nx616j update file has no map.txt file
what can i do to reload oem software on the phone?
There are 2 versions for the software.
One of them has a single button on the right side with strange symbols and "root" in between.
The other one has 2 buttons - one is with "root" and the other "fastboot" in between.
If your phone is in boot-loop and before you do something stupid hard-core.
Reboot the phone in fastboot - long hold power, then when restarts - volume down + power.
You may need few restarts before stabilize it in fastboot.
Then use that second software and press the button which has label "fastboot" in the text.
Restart and you have to be ok
here is th escreen after root
https://photos.google.com/share/AF1QipOSac3LED_NSTD7Y0ZUDggclcTq1kg4JeiBKn3PaNkO6BDNJpfKCkTVJ4BGzNMOoQ?key=VUFDcXdYczdpS0U0R1hNeFljeHlTNEVzNkZ4QVh3
Simple fix.
Do what I told you. Read my pervious post.
br_other said:
Simple fix.
Do what I told you. Read my pervious post.
Click to expand...
Click to collapse
I read but it's not so clear you mentioned something like 2 programs witch program are you referring too?. Also if you saw my picture I think the software must been reinstalled. I normally works with Samsung and having all the software to fix it but Nubia it's something new for me . Thank you very much for your help.
Br_other refers to the original Chinese link (see the tutorial there is the link somewhere).
The new tool includes a fastboot option.
Try to get the new download, otherwise I will reupload it later.
Otherwise:
Your bootloader is unlocked and a wrong bootimage was flashed.
So basically to repair you need to get into fastboot or recovery by pressing (phone must be off) volume down or up with the power button simultaneously.
If this still works you can download the official firmware, extract the boot.img out there and reflash it with ADB.
Basically adb flash boot boot.img
Hello. Thanks so much for the tutorial.
I have finished all the steps, however when I open playstore, stuck at "checking info" status. What could have I done Wong? Or missed any.
Thanks
phone is brick now
Hi guys
let me explain you whats going on with my phone ... But first i would like to thanks @Teeemoo and @br_other they've helping me a lot with my rooting issues but since then my phone is in boot loop mode and i can't use anymore I read everywhere on the net to found a solution but it's seems to not having anything works!!!! To do a short story my phone was working fine with the chinese rom but was useless without google play services. i was waiting every day for a root or global rom to flashed. Last week i receive a OTA software update version 2.19 so i did the update. 2 days ago i saw a post with all the instructions to root the phone and install the google framework with working apps in the main pages, not like the stupid sand box that was terrible to use. I followed the instruction and root the phone . After the root complete the phone reboot in bootloop mode and with no way to recovery my original software. I've posted my issues in this forum and get help from 2 member mentioned above. They told me to found the other root file with fastboot recovery it was really hard to found because the link is not active anymore but i finally found and install. I've put my phone in fast boot mode and try to recovery but i always had the same error message see the pictures attached. I decide to do more researched on the net and i found a way to install the boot loader IMG using ADB command . I try to install but i realize by making some test that my bootloader is not unlocked so i'm not able to install the image . I d'ont know what can i do now but i think i will throw my phone out the windows .......
sorry for my english is not my primary language
nuvocell said:
Hi guys
let me explain you whats going on with my phone ... But first i would like to thanks @Teeemoo and @br-other they've helping me a lot with my rooting issues but since then my phone is in boot loop mode and i can't use anymore I read everywhere on the net to found a solution but it's seems to not having anything works!!!! To do a short story my phone was working fine with the chinese rom but was useless without google play services. i was waiting every day for a root or global rom to flashed. Last week i receive a OTA software update version 2.19 so i did the update. 2 days ago i saw a post with all the instructions to root the phone and install the google framework with working apps in the main pages, not like the stupid sand box that was terrible to use. I followed the instruction and root the phone . After the root complete the phone reboot in bootloop mode and with no way to recovery my original software. I've posted my issues in this forum and get help from 2 member mentioned above. They told me to found the other root file with fastboot recovery it was really hard to found because the link is not active anymore but i finally found and install. I've put my phone in fast boot mode and try to recovery but i always had the same error message see the pictures attached. I decide to do more researched on the net and i found a way to install the boot loader IMG using ADB command . I try to install but i realize by making some test that my bootloader is not unlocked so i'm not able to install the image . I d'ont know what can i do now but i think i will throw my phone out the windows .......
sorry for my english is not my primary language
Click to expand...
Click to collapse
Try this via ADB:
Code:
fastboot oem nubia_unlock NUBIA_NX616J
and then
Code:
fastboot flash boot boot.img
Teeemoo said:
Try this via ADB:
Code:
fastboot oem nubia_unlock NUBIA_NX616J
and then
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
doesnt work
nuvocell said:
doesnt work
Click to expand...
Click to collapse
Because you need to replace the 'boot.img' part with the location of ur boot.img file.
If you don't have the boot image, tell me and I will extract it for you.
Cheers
Teeemoo said:
Because you need to replace the 'boot.img' part with the location of ur boot.img file.
If you don't have the boot image, tell me and I will extract it for you.
Cheers
Click to expand...
Click to collapse
let me explain you what i did . i download the oem firmware and extract it then i took the boot image file and copy to the C drive and replace the name by recovery.img. is that is correct ?