Related
It took me days trying to make Doogee send me these files. I managed to unbrick my device with this firmware.
So I decided to post it here so anyone can unbrick ther Y100X.
It must be used with SP Flash Tool, here is the link to the thread: Flash Tool
This is the firmware :laugh: (extract with 7zip): --files removed--
For me it worked with the Format All + Download option.
-The firmware is stock and provided by Doogee. I got nothing to do with the making of the files. I also do not get paid for providing these files. I just wanna help others. -
Link sharing is on now. Sorry for forgetting about this.
thanks for el firmware, now how to get the root ... xD. My smartphone is underway yet, cost me $ 70
Root can be achieved through kingroot. But it is an app I personally hate, so I used some KingRoot to SuperSU apps and they worked,so good luck!
Many thanks for the original Firmware :highfive:
I hope there will upgrade to 5.1 or a dream.
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
nickless07 said:
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
Click to expand...
Click to collapse
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
ariss77 said:
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
Click to expand...
Click to collapse
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
thank you
Hi brother
Thank you very much for the ROM, it help me a lot.
nickless07 said:
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
Click to expand...
Click to collapse
Try to flash without the battery, rather than simply turned off the phone.
You my friend are a saviour.
Tried rooting and bricked my phone, Kingroot wouldn't work so tried the Kingo apk which bricked it.
Back to square one now so will wait for a verified root
Thanks :good::good::good::good::good::good::good:
Hi can with this repair an bootlop on the doogee nova y 100x .when i turnt off the phone ??
Sent from my Valencia2_Y100pro using XDA Free mobile app
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Hi.
I had the bootloop problem, and I've solved with this firmware. (Many thanks TheSpecialNoob)
In order to FlashTool detects the phone, needs to be power off, without enter in FlashTool mode.
Select a scatter file, choose "Format All + Download" and press Download.
Thats all.
Custom recovery Doogee Nova Y100X
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
zagzag99 said:
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Click to expand...
Click to collapse
It's a problem on all Y100X devices. Doogee must have messed something up in the build.prop I hope they release an official fix.
Carliv Touch Recovery v3.3 for Doogee Nova Y100X
fanjul said:
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
Click to expand...
Click to collapse
I auto-answer.
I found a Russian website, which explain how to install a custom recovery (Carliv Touch Recovery v3.3). :good:
I leave the link to the page. http://4pda.ru/forum/index.php?s=&showtopic=669833&view=findpost&p=42555995
If someone is not able to install it , I can try to explain it.
Also I have kept all the necessary files.
Regards
greetings from Spain
Thanks for giving us the original ROM.
I followed your steps and selecting "Format All + Download" I deleted the imeis and as I have read on the internet, also the NVRAM.
As I can do to permanently leave imeis? every time I have restored the ROM to modify and not know if I deleted more things to do a "Format ALL"
Someone I can pass the "NVRAM.bin" to upload it to my phone? Any other suggestions?
[email protected]
Regards
Yeah, I have the same problem. After restoring the stock rom, I have lost NVRAM settings.
Someone who has not restored the phone to stock, can upload the file nva.bin phone.
Thank you
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Reserved
Nice Guide, Can you please list MTK devices ????
421rahman said:
Nice Guide, Can you please list MTK devices ????
Click to expand...
Click to collapse
OK, Will be adding attachments later, Thanks
Salman
--
Thanks @Salman Al-Badgail for this use full info.
Deena Khanam said:
Thanks @Salman Al-Badgail for this use full info.
Click to expand...
Click to collapse
welcome & Thanks
@jamsubzero check this guide
@jamsubzero I saw your post and thread regarding Dead Bricked
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
Click to expand...
Click to collapse
NEVER DOWNLOAD ROM NOT MEANT FOR YOUR PHONE. IT WILL BRICK IT !
What you did is you flashed wrong firmware to your device and the result you in Dead Brick, However there is still solution for your problem. Please Please Please do a proper search first and download correct firmware and other necessary files for your device. Please check firmware number ok.
You can Flash it again but you need to open phone and try, Check here for better understanding.
GUIDE : HERE. Or else please go to any mobile shop and ask them to flash. Dont tell the original reason that you tried to flash or etc. Tell them that it stop suddenly and for now I am unable to access it. They charge you about 5-15 USD based on your country, for me they had charged 10U$D me for lenovo A3500-HV dead flashing. Hope this help you.
i got no scatter file in stock rom pls help!
Aller retour si flash tool
Hard bricked Lenovo a7000
**Hi I got problem on yesterday I was install ing new Rom but suddenly my Lenovo a7000 hard brick
It is not responding any point .even charging .and charging light also .it's dead
But it when I connet to my pc it's connecting sound conning from pc ....My phone is dead plaease help
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks [email protected]
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
S
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
Salman Al-Badgail said:
Reserved
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
im having mt8127 mtk device it is not flashing iam having corrupted preloader i tried to flash the preloader it is not flashing , can any body knows to fix it??
How can a phone that's bricked be switched off? Am a bit confused.
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
i am trying to flash vivo s7 and the cable shake and since then the phone is dead, have flashed it several time, it complete but it refuse to on
I need help please
Basically I was flashing updates for my CUBOT Nova and everything was going fine and I tried out this custom recovery which wouldn't mount any partition so it didn't really suit me. And I did this a dozen of times with other recoveries and if anything happened I had the firmware in SP tools ready to be flashed and if I could save going to it I just used the fastboot to flash it, and so I decided to completly stop and just put my phone back to normal and because I done it before I formatted the whole flash, (and FYI every 2 times I plugged in the phone powered off my computer always searched for drivers in the windows update but it failed and so everything still worked) but after I formatted it and plugged it out and in to download the firmware, my computer successfully installed the drivers and at this moment I was like shoot so I tried to download and it didnt recognise my phone and so I uninstalled the driver my computer installed and see if it worked and it kept installing it again, so I decided to uninstall every mtk driver I had and rebooted, when I installed every single driver again it tried to download drivers from the windows update but it failed and on the sp flash tools it goes to 100% on the Downloading DA (so the red bar) and stays like that for a while and I get notifications that I have a unrecognisable usb device and after a while it gives me randomly 2 errors 0xC0050005 and 0XC0060001 and I know someone is going to tell me I dont have the right firmware or that it's not the right ones but it isn't I got from the official Cubot website and I got an early versions from firmwarefiles I think and none of them work, now I just have a phone without anything on it and I cant flash anything on it until I just hope someone would walk me through what to do I would appreciate so much I'm sorry I wrote so much as I had to explain in max detail as I could what happened!
netcrafy said:
How can a phone that's bricked be switched off? Am a bit confused.
Click to expand...
Click to collapse
i wanted to say the same thing, also i tried enter EDL for 2 days DD (helio G80) LMFAO
Hi there
I would like to know if you can help me in repairing my device.
So i wanted to do an upgrade on the tablet and i messed it up.
I was on CMW recovery at first and then i did a format on cache system and data. but when i wanted to flash the rom CM14.1 it fail and the devices restarted.
the screen goes on but i can see faint lines on the screen.
I did make a back up of the rom and tried to flash it back but it didnt work.
I used all the roms and it still didnt work. I tried many SP flash tool and formating and still not working. every single rom has been flash and all are green but the phone does not want to boot. i have youtube and followed the instructions and every single step i can think of but u have a gut feeling i am mssing something.
I cannot write SN on the fone as it will not work. i have uninstalled all the drivers re-install all the drivers did all the instruction that you have provided but still it will work.
the tablet does still detect on the PC and it does work. so basically it is in a bootloop but its not powering up. Some suggested using MRT TOOLS or MIRACLES but i have a problem with that as it always have a virus attached it to and when i download it the pc removes it. so i dont know where i can get a good crack tool.
i really need your help if you can.
Hello Guys
i closed SP tool while flashing
my phone : infinix hot 10s
i cant power on it and cant join fastboot and cant join bootloader
When i connect phone by orginial usb
computer said (USB not recoginzed)
i installed all drivers but now phone is dead and he was rooted so i cant going to warranty
how i fix it?
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
try remove the battery and start the download BEFORE your phone is connected to the computer. when your phone is connected, press volume buttons to aid detection by your computer. the download should start.
i had the same phone which i tried to recover but it was unpredictable after reflashing; it could sometimes finish booting and go to the OS but everything stopped and crashed immediately... or it would not boot at all (stuck at Lenovo logo or the second animated logo). after many times attempting to recover, i gave up, junked it, and bought another phone.
Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
Is easy to fix it just open the back cover of the phone and solder a wire from gnd to kpcolo reflash the rom and then unsolder the wire is always working on a2010
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
Hint: Add Tecno Spark 5 pro (KD7) to this thread's title thus mainly owners of such device get addressed.
can you access fastboot?
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
ineedroot69 said:
can you access fastboot
Click to expand...
Click to collapse
vanc5 said:
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
Click to expand...
Click to collapse
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
ineedroot69 said:
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
Click to expand...
Click to collapse
Yeah, i accessed the fastboot to load the patched img file and then fastboot rebooted and it just got stuck in the loop
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revive
Click to expand...
Click to collapse
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
anger-Fist said:
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
Click to expand...
Click to collapse
The phone doesn't need to be completely off. allow it to bootloop.
Just follow the process in the tutorial linked to and you should
be fine.
by the way am assuming your bootloader is already unlocked.
please send the link to download the auth file good sir
anger-Fist said:
please send the link to download the auth file good sir
Click to expand...
Click to collapse
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide on how it worked for me
i followed the steps to the letter but gives me errors everytime
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
ptetteh227 said:
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide onu how it worked for me
Click to expand...
Click to collapse
windows 10
tecno spark 5 pro 4gb ram/ 128gb rom firmware no. KD7-H6211FQRSTU-Q-GL-210520V392
anger-Fist said:
i followed the steps to the letter but gives me errors everytime
Click to expand...
Click to collapse
please send a screenshot of the command prompt after you run the command just In case of any errors (i saw a traceback error in one of the screenshots). you must run the command prompt as administrator
anger-Fist said:
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
Click to expand...
Click to collapse
you don't need one. I didn't use one
ptetteh227 said:
you don't need one. I didn't use one
Click to expand...
Click to collapse
if your tecno spark 5 pro is same as mine(4gb ram/128gb rom) can you send me the link you to download the firmware and da file please
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work for kd7 tecno
new post
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work my kd7 twrp recovery and root
new post
revolut app is not available for custom roms...
how to completely remove twrp, custom rom and revert back to stock?
i don't have sd card.
model ver: redmi 9a M2006C3LG
people can't find simple solutions...
look https://forum.xda-developers.com/t/...-relock-the-bootloader.3876887/#post-78372719
Information is scattered all over the Internet, there is no one guide that covers everything. For example here they write that i can't use Xiaomi Flash Tool because i have mediatek cpu... i have to use sp flash tool, why there is no good guide in xda? https://androidmtk.com/use-mi-flash-pro-download-xiaomi-firmware
followed this
and my redmi 9a is now competely dead... black screen all the time... so good support, shiity sites, a lot tutorials with different files etc. so nice...
all these hardbrick methods not working because now phone is not recognized by pc, installed everything, volume+ and connecting and errors, no device in libusb - removed before.
python stuck on [2023-04-26 21:52:11.289733] Waiting for device
what to do with this phone? move to trash?
omg thank god it worked -.-
"Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again." - https://forum.xda-developers.com/t/...ecovery-no-fastboot-no-signs-of-life.3534512/
please good tutorial how to do that without this mediatek bypass and sp flash tool... so many bad tutorials or just give link to good guide.
i'm talking with myself
ok so i need only fastboot stock rom from https://www.getdroidtips.com/xiaomi-redmi-9a-stock-firmware-flash-file/
and flash with Mi Flash Tool. Easy, but what are that mediatek bypass tutorials, and sp flash tool so bad -.- so many brick problems.
https://www.reddit.com/r/Xiaomi/comments/pbk7fp
mar1732 said:
omg thank god it worked -.-
"Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again." - https://forum.xda-developers.com/t/...ecovery-no-fastboot-no-signs-of-life.3534512/
please good tutorial how to do that without this mediatek bypass and sp flash tool... so many bad tutorials or just give link to good guide.
Click to expand...
Click to collapse
Yea because you failed to flash with Sp Flash Tool
mar1732 said:
i'm talking with myself
ok so i need only fastboot stock rom from https://www.getdroidtips.com/xiaomi-redmi-9a-stock-firmware-flash-file/
and flash with Mi Flash Tool. Easy, but what are that mediatek bypass tutorials, and sp flash tool so bad -.- so many brick problems.
https://www.reddit.com/r/Xiaomi/comments/pbk7fp
Click to expand...
Click to collapse
Well, you can use MiFlashTool, create a folder named *logs*( idk if it's logs or log but try logs first) inside the MiFlashTool folder if you don't have it ( because u will see errors). Open the tool, select your rom, connect your phone in fastboot, click refresh to scan again, and click flash
P.S. If your device can boot to fastboot you can use MiFlashTool method
-----------------------------------------------------------------
My bad, I didn't read all of that.
Let's see , you need some tools, Mediatek bypass tool ( I used The app not the python one) , sp flash tool, and ... LibUsb first time, nothing else i think. Ok so :
1. Open lib usb and do your thing yk what I mean. ( Skip this if u did that )
2. Open Sp flash tool and bypass tool
3. Load your rom in sp Flash tool app, if you have blackscreen or something press firmware upgrade, if not just download, and deselect the preloader??
4. On bypass app, press bypass button, connect phone holding the volume up and power button i think, you can try another combination if it doesn't work ( try holding for ~2 seconds more after bypassing ). It should work.
5. Back to Sp Flash Tool, open settings, go to connections( idk i forgot the name, but u should , and change from USB to uport or smth, to your phone port.
6. Flash .
If you need help, just give me your discord? I don't remember all the things and yeah.....