Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
Hint: Add Tecno Spark 5 pro (KD7) to this thread's title thus mainly owners of such device get addressed.
can you access fastboot?
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
ineedroot69 said:
can you access fastboot
Click to expand...
Click to collapse
vanc5 said:
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
Click to expand...
Click to collapse
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
ineedroot69 said:
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
Click to expand...
Click to collapse
Yeah, i accessed the fastboot to load the patched img file and then fastboot rebooted and it just got stuck in the loop
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revive
Click to expand...
Click to collapse
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
anger-Fist said:
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
Click to expand...
Click to collapse
The phone doesn't need to be completely off. allow it to bootloop.
Just follow the process in the tutorial linked to and you should
be fine.
by the way am assuming your bootloader is already unlocked.
please send the link to download the auth file good sir
anger-Fist said:
please send the link to download the auth file good sir
Click to expand...
Click to collapse
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide on how it worked for me
i followed the steps to the letter but gives me errors everytime
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
ptetteh227 said:
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide onu how it worked for me
Click to expand...
Click to collapse
windows 10
tecno spark 5 pro 4gb ram/ 128gb rom firmware no. KD7-H6211FQRSTU-Q-GL-210520V392
anger-Fist said:
i followed the steps to the letter but gives me errors everytime
Click to expand...
Click to collapse
please send a screenshot of the command prompt after you run the command just In case of any errors (i saw a traceback error in one of the screenshots). you must run the command prompt as administrator
anger-Fist said:
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
Click to expand...
Click to collapse
you don't need one. I didn't use one
ptetteh227 said:
you don't need one. I didn't use one
Click to expand...
Click to collapse
if your tecno spark 5 pro is same as mine(4gb ram/128gb rom) can you send me the link you to download the firmware and da file please
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work for kd7 tecno
new post
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work my kd7 twrp recovery and root
new post
Related
It took me days trying to make Doogee send me these files. I managed to unbrick my device with this firmware.
So I decided to post it here so anyone can unbrick ther Y100X.
It must be used with SP Flash Tool, here is the link to the thread: Flash Tool
This is the firmware :laugh: (extract with 7zip): --files removed--
For me it worked with the Format All + Download option.
-The firmware is stock and provided by Doogee. I got nothing to do with the making of the files. I also do not get paid for providing these files. I just wanna help others. -
Link sharing is on now. Sorry for forgetting about this.
thanks for el firmware, now how to get the root ... xD. My smartphone is underway yet, cost me $ 70
Root can be achieved through kingroot. But it is an app I personally hate, so I used some KingRoot to SuperSU apps and they worked,so good luck!
Many thanks for the original Firmware :highfive:
I hope there will upgrade to 5.1 or a dream.
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
nickless07 said:
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
Click to expand...
Click to collapse
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
ariss77 said:
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
Click to expand...
Click to collapse
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
thank you
Hi brother
Thank you very much for the ROM, it help me a lot.
nickless07 said:
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
Click to expand...
Click to collapse
Try to flash without the battery, rather than simply turned off the phone.
You my friend are a saviour.
Tried rooting and bricked my phone, Kingroot wouldn't work so tried the Kingo apk which bricked it.
Back to square one now so will wait for a verified root
Thanks :good::good::good::good::good::good::good:
Hi can with this repair an bootlop on the doogee nova y 100x .when i turnt off the phone ??
Sent from my Valencia2_Y100pro using XDA Free mobile app
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Hi.
I had the bootloop problem, and I've solved with this firmware. (Many thanks TheSpecialNoob)
In order to FlashTool detects the phone, needs to be power off, without enter in FlashTool mode.
Select a scatter file, choose "Format All + Download" and press Download.
Thats all.
Custom recovery Doogee Nova Y100X
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
zagzag99 said:
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Click to expand...
Click to collapse
It's a problem on all Y100X devices. Doogee must have messed something up in the build.prop I hope they release an official fix.
Carliv Touch Recovery v3.3 for Doogee Nova Y100X
fanjul said:
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
Click to expand...
Click to collapse
I auto-answer.
I found a Russian website, which explain how to install a custom recovery (Carliv Touch Recovery v3.3). :good:
I leave the link to the page. http://4pda.ru/forum/index.php?s=&showtopic=669833&view=findpost&p=42555995
If someone is not able to install it , I can try to explain it.
Also I have kept all the necessary files.
Regards
greetings from Spain
Thanks for giving us the original ROM.
I followed your steps and selecting "Format All + Download" I deleted the imeis and as I have read on the internet, also the NVRAM.
As I can do to permanently leave imeis? every time I have restored the ROM to modify and not know if I deleted more things to do a "Format ALL"
Someone I can pass the "NVRAM.bin" to upload it to my phone? Any other suggestions?
[email protected]
Regards
Yeah, I have the same problem. After restoring the stock rom, I have lost NVRAM settings.
Someone who has not restored the phone to stock, can upload the file nva.bin phone.
Thank you
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)
MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches
https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729
Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.
Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).
You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)
Please, consider to donate me something for the work and the risk (maybe idk). Thanks
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)
If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
Awesome saw u on r/OnePlus telegram
How did you get these files?
Could be from phonandroid, since the tool is there for download since 5 days .
MickyFoley said:
Could be from phonandroid, since the tool is there for download since 5 days .
Click to expand...
Click to collapse
The international one? Are you sure? I have found only the chinese that puts Hydrogen OS restoring
OnePlus telegram? Someone pm me the link
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
anthonythangaraj said:
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
Click to expand...
Click to collapse
Check Desktop Site box in your browser.
Plz mirror the link .
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
lerieur said:
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
Click to expand...
Click to collapse
No way; the techs come to you with this
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
mirror plzz
Panssee said:
mirror plzz
Click to expand...
Click to collapse
I'm trying to get developer permission to android file host
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
I will edit first post to explain all in detail
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
done
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
joemossjr said:
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
Click to expand...
Click to collapse
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Test with 128 GB version about 10-15 minutes (with already installed drivers): OK
It runs like a new shipped OP6.
Fivegates said:
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Click to expand...
Click to collapse
Lol oh yeah
Qualcomm tool is not for fastboot or recovery mode, but for qualcomm drivers mode (USB to serial port).
So if you can boot to recovery or fastboot, probably don't need this pack.
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.
Hi,
so with this Tutorial i was able to unlock the bootloader of the Blackview tab 8.
but i just could not find any way to flash magisk.
- "fastboot boot patched_img.img" and "fastboot flash boot patched_img.img" gave me "fastboot: error: Couldn't parse partition size '0x'"
- "fastboot flash:raw boot boot.img" was able to flash the patched_boot.img (a twrp i tried to port as well), but then i was stuck at blackview logo (SOFTBRICK)
- SPD Research Tool R24.0.0003 was able to flash patched_boot.img, but same stuck at logo (SOFTBRICK)
The only way i was able to unbrick it, involved opening back cover and disconnecting the battery and reconnecting it again.
then put research tool to download mode and flash stock img
I'm hoping for some advices, what i could try to get magisk flashed
- Tab8 Firmware (DK_SC9863A_P30_5G_10.0_Tab8_EEA_20201022_V1.0)
- SPD Research Tool R24 (there are 2 other tools but afaik research tool is the only one, where i can choose which partitions to flash)
best regards
Oxo
Hi,
I've got a tab8 too (eu) and I have the boot_patched.img generated by magisk manager but I can't unlock the bootloader. I used the tuto you gave (your first link) too.
Could you explain what you did to successfully unlock your bootloader please?
Thanx
Bests regards
I was trying to backup the stock ROM of this same tablet, however i must have incorrectly installed SPD drivers or somehow had uninstalled them, Research Download said "failed user cancel", then boom when i tried to switch it on it was not turning on nor charging. I have been trying to charge it for about 4 days, no dice, it does not charge still, nor turning on.
I must have soft bricked it, because it gets detected by the PC as "SPRD U2S Diag (COM5)", but when i try to flash Stock ROM i downloaded it either says " failed user cancel" or gets stuck at "checking baudrate".
I don't know what to do, would opening it and test point it make a difference? Because some guy on Youtube was able to flash his SPD phone after test pointing it, as it was facing "failed user cancel"
Another question, which key combinations did you use when flashing your Tab 8? Vol - and Power or?
nr0000000 said:
Hi,
I've got a tab8 too (eu) and I have the boot_patched.img generated by magisk manager but I can't unlock the bootloader. I used the tuto you gave (your first link) too.
Could you explain what you did to successfully unlock your bootloader please?
Thanx
Bests regards
Click to expand...
Click to collapse
I did it like described in the tutorial i linked. did you use linux? maybe in a VM or so, to use the .sh script. AFAIK it doesnt work with windows
also dont forget to activate "OEM unlocking" in dev options
StormChaser1337 said:
I was trying to backup the stock ROM of this same tablet, however i must have incorrectly installed SPD drivers or somehow had uninstalled them, Research Download said "failed user cancel", then boom when i tried to switch it on it was not turning on nor charging. I have been trying to charge it for about 4 days, no dice, it does not charge still, nor turning on.
I must have soft bricked it, because it gets detected by the PC as "SPRD U2S Diag (COM5)", but when i try to flash Stock ROM i downloaded it either says " failed user cancel" or gets stuck at "checking baudrate".
I don't know what to do, would opening it and test point it make a difference? Because some guy on Youtube was able to flash his SPD phone after test pointing it, as it was facing "failed user cancel"
Another question, which key combinations did you use when flashing your Tab 8? Vol - and Power or?
Click to expand...
Click to collapse
i dont know about test point actually. you can open it pretty easily and just disconnect battery. then connect again, use sdp tool and start the flash process, then press vol- and hold it while pluging in usb cable. thats what i do, if im stuck and cant do anything else.
regarding button combination, i'm not sure. usually i use adb reboot bootloader.
Also for the Blackview Tab 8 you need to extract keys from your vbmeta.img and sign it differently, also every other .img you wanna flash, like patched magisk boot.img. i successfully rooted mine some time ago, but i flashed some magisk modules and something went wrong and i ended up bootlooping. now im trying to root again.
somehow i cant flash the vbmeta.img. i dont remember if i did anything different last time.
all the stuff i did to get it rooted, i have taken from that hovatek forum.
edit: uploaded Stock Rom Images and stuff like for example a magsik patched boot image, which got repacked with android image kitchen then signed and repacked again with avbtool here
PS: dont have time to invest to this atm, also i just read that there was a update sometime this year which i didnt get, so maybe that changed some stuff.
I was considering buying this Blackview tablet and before I ordered it I got in touch with the Blackview home people in Hong Kong. They were extremely UNHELPFUL AND EVEN RUDE (not unusual for the chinese). As far as I am concerned this mob does not deserve to be supported and having a product that is so difficult to do any tinkering with precludes it from my list for sure. It is so time for consumers to DEMAND that any product that does not give explicit instructions as to unlocking and flashing is not supported. Why is it not possible in this day and age for this to happen. OK I know why but you get my meaning.
So i recently wanted to root my OOS 12 oneplus nord, and i bricked it..
i cant get into fastbootD, Recovery, or anything at all except fastboot, the device is detected as Android bootloader interface in device manager, i have tried using: msm tool, flashing normal rom (error: partition not found and Flashing is not allowed for critical partition)
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Azeld said:
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
As I said, msm didn’t work for me
Hafted said:
As I said, msm didn’t work for me
Click to expand...
Click to collapse
may be need to reinstall drivers? should be displayed differently in the device manager than Android bootloader interface.
gorro8 said:
may be need to reinstall drivers?
Click to expand...
Click to collapse
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Hafted said:
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Click to expand...
Click to collapse
what do you do to enter the edl mode?
what cable are you using?
gorro8 said:
what do you do to enter the edl mode?
what cable are you using?
Click to expand...
Click to collapse
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
download the correct drivers and replace them in the device manager
gorro8 said:
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I’ll try that and give you an update, Ty!
worth trying another USB port too, even if they are supposed to be the exact same. Same thing happened with my laptop, tried another (presumably identical) USB port and it works first time, every time
Hafted said:
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
Click to expand...
Click to collapse
1st, u really should find the exact drivers. But also very important to remember booting your PC into Test Mode with Driver Signature Enforcement OFF - BEFORE installing the EDL 9008 Drivers for your device.
Besides, after you press and hold both Vol buttons, u should plug the device in IMMEDIATELY, not waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Hey, so after some time (I got a new phone by now) I managed to fix it, turns out that i had to instantly put in the cable, just like how LinhBT Said
LinhBT said:
waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Click to expand...
Click to collapse
Here is something that might work for unbricking and/or getting in to EDL-mode:
Unable to reinstall Oxygen OS from custom ROM. FAILED (remote: Flashing is not allowed for Critical Partitions ). Need assistance, details below.
Hello, friends. So I am here following this exact tutorial : https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ I currently am stuck there @pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$...
forum.xda-developers.com