So i recently wanted to root my OOS 12 oneplus nord, and i bricked it..
i cant get into fastbootD, Recovery, or anything at all except fastboot, the device is detected as Android bootloader interface in device manager, i have tried using: msm tool, flashing normal rom (error: partition not found and Flashing is not allowed for critical partition)
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Azeld said:
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
As I said, msm didn’t work for me
Hafted said:
As I said, msm didn’t work for me
Click to expand...
Click to collapse
may be need to reinstall drivers? should be displayed differently in the device manager than Android bootloader interface.
gorro8 said:
may be need to reinstall drivers?
Click to expand...
Click to collapse
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Hafted said:
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Click to expand...
Click to collapse
what do you do to enter the edl mode?
what cable are you using?
gorro8 said:
what do you do to enter the edl mode?
what cable are you using?
Click to expand...
Click to collapse
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
download the correct drivers and replace them in the device manager
gorro8 said:
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I’ll try that and give you an update, Ty!
worth trying another USB port too, even if they are supposed to be the exact same. Same thing happened with my laptop, tried another (presumably identical) USB port and it works first time, every time
Hafted said:
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
Click to expand...
Click to collapse
1st, u really should find the exact drivers. But also very important to remember booting your PC into Test Mode with Driver Signature Enforcement OFF - BEFORE installing the EDL 9008 Drivers for your device.
Besides, after you press and hold both Vol buttons, u should plug the device in IMMEDIATELY, not waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Hey, so after some time (I got a new phone by now) I managed to fix it, turns out that i had to instantly put in the cable, just like how LinhBT Said
LinhBT said:
waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Click to expand...
Click to collapse
Here is something that might work for unbricking and/or getting in to EDL-mode:
Unable to reinstall Oxygen OS from custom ROM. FAILED (remote: Flashing is not allowed for Critical Partitions ). Need assistance, details below.
Hello, friends. So I am here following this exact tutorial : https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ I currently am stuck there @pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$...
forum.xda-developers.com
Related
I have made huge mistake and i dont know what to do and would really appreciate some help. I was on Open Beta 17 with magisk and twrp and i decided i wanted to revert the stock using msmtool. I have used it before so i know about all the drivers to install and how to get to edl and so on. So i started the msm software and hit start, but a few seconds into the flash i got the an error "firehosewritedata failed" and since then my device cant be recognised by my computer and its not booting up or even showing that its charging. I tried reinstalling the drivers and trying msmtool but the device isnt recognised at all.
Booting into fastboot only says Update download failed please check your download flow is right
Oh boy, that's a really bad situation. Is your EDL working? In EDL are you seeing the device as Qualcomm device in the device manager? If neither, try installing the Qualcomm drivers again and try EDL again..if still problem persist, head straight to the nearest service centre...
check this link too..
https://forum.xda-developers.com/oneplus-7-pro/help/ultra-hard-brick-t3947127
Use a USB 2.0 port.
amirage said:
Oh boy, that's a really bad situation. Is your EDL working? In EDL are you seeing the device as Qualcomm device in the device manager? If neither, try installing the Qualcomm drivers again and try EDL again..if still problem persist, head straight to the nearest service centre...
check this link too..
https://forum.xda-developers.com/oneplus-7-pro/help/ultra-hard-brick-t3947127
Click to expand...
Click to collapse
MrSteelX said:
Use a USB 2.0 port.
Click to expand...
Click to collapse
Thank you for the feedback, and the late reply. I eventually reinstalled all oneplus drivers again and put windows to debugging mode and tried one more msmtool flash, and after a lot of praying and swearing it finally flashed successfully. For future reference, windows debugging mode is a good place to be in for doing these flashes or to ensure no fails.
I'm hoping someone can help me out here. I've been trying for hours to restore my OnePlus 8T with the global MSM tool and I keep getting the Sahara communication failed error over and over again. My drivers are successfully installed and I've tried 5 different USB ports and 3 different types of cables and nothing works. I've tried rebooting my PC multiple times, and 2 out of the 3 cables I've used are official OnePlus cables.
Some_Random_Username said:
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
Click to expand...
Click to collapse
I AM STUCK IN EDL. ALL I GET IS SAHARA COMMNICATION FAILED. I NEED HELP
1
Hi, RootK1t...
Thank you soooooooooooo much for this !
This little and powerful trick brings my old OPPO R7 Plus back to life !!!
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
andrew_yousry said:
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
Click to expand...
Click to collapse
andrew_yousry said:
I have similar problem, but my phone is totally dead. can't enter EDL, Bootloader or Recovery.
is there anything I can do?
Click to expand...
Click to collapse
EDL is a Emergency Download Mode thats cant Destroy by Software!!
After trying to restore stock OOS and rebooting fastboot my phone is now stuck in Qualcomm Crashdump mode. I have MSMDownloadTool installed but it won't open, it just opens a windows saying "Program has been started" after executing it.
I also can't reboot to the bootloader, the phone just turns on or off.
What to do?
From my rather long post in https://forum.xda-developers.com/t/...your-device-to-oxygenos.4180837/post-86563159 :
"connect the phone to the PC whilst it's still in CrashDump mode and then press Pwr + Vol Up until the phone buzzes and then hold Vol Up + Vol Dn and MSM will then connect."
Thank you, that worked. I have another question if you don't mind:
I tried to restore OxygenOS with https://forum.xda-developers.com/t/...xygenos-fastboot-roms-for-oneplus-8t.4348023/ but it cant find the create-logical device and delete-logical-device commands, also when I try to flash some of the image files fastboot complains about not being able to flash system critical files. I tried running fastboot flashing unlock_critical but that didn't change anything. Is there any other way to restore Oxygen OS with fastboot or is there any fix to my issues? I've been looking on the web for a few hours now, to no result.
petrolblue said:
Thank you, that worked. I have another question if you don't mind:
I tried to restore OxygenOS with https://forum.xda-developers.com/t/...xygenos-fastboot-roms-for-oneplus-8t.4348023/ but it cant find the create-logical device and delete-logical-device commands, also when I try to flash some of the image files fastboot complains about not being able to flash system critical files. I tried running fastboot flashing unlock_critical but that didn't change anything. Is there any other way to restore Oxygen OS with fastboot or is there any fix to my issues? I've been looking on the web for a few hours now, to no result.
Click to expand...
Click to collapse
The delete/create logical commands are in the thread OP, but you have to tap on "click to show" button.
Note that fastbootd is not the same as fastboot. And you need to be in that mode to avoid the "critical" warning and to be able to do the logical partitions stuff.
So, after massively failing to update my 8T I am stuck in a bootloop with a bit of Crash dump [dm-verity device corrupted force dump].
I am still able to access fastboot but that is it. I can't get adb working, when I attempt to enter recovery mode all I get is a black screen, MSM is not able to find my phone/I can't get my phone to enter EDL (been trying for about 5 hours now).
I feel so defeated by this can anyone help me?
Did you read my post (#2)?
Does your PC make a sound when you connect your phone to it in EDL mode? If so, try reinstalling the Qualcomm driver (though I've never needed to do that).
If you can get into bootloader, then you can try using the method in https://forum.xda-developers.com/t/guide-unbrick-or-restore-to-oos-using-only-fastboot.4289013/
BillGoss said:
Did you read my post (#2)?
Does your PC make a sound when you connect your phone to it in EDL mode? If so, try reinstalling the Qualcomm driver (though I've never needed to do that).
If you can get into bootloader, then you can try using the method in https://forum.xda-developers.com/t/guide-unbrick-or-restore-to-oos-using-only-fastboot.4289013/
Click to expand...
Click to collapse
Whenever I connect my phone to the pc it just auto-boots. In my devices the driver does show up. But I don't think I have been able to access EDL.
I did reinstall the driver as well, no change. I tried installing the drivers and MSM stuff on a 2nd pc, still unable to get it going.
I did come across this method and my phone/fastboot keeps erroring whenever I try to use cmd for anything beyond Reboot fast boot. It's weird.
Angilias37 said:
Whenever I connect my phone to the pc it just auto-boots. In my devices the driver does show up. But I don't think I have been able to access EDL.
I did reinstall the driver as well, no change. I tried installing the drivers and MSM stuff on a 2nd pc, still unable to get it going.
I did come across this method and my phone/fastboot keeps erroring whenever I try to use cmd for anything beyond Reboot fast boot. It's weird.
Click to expand...
Click to collapse
I see that your PC sees the phone (Qualcomm...) but has an ! against it. If you open that you should see the option to update the driver.
PS: you may need to flash boot, DTBO, and recovery in fastboot first before you can use fastbootd to flash the other partitions for the fastboot method.
BillGoss said:
I see that your PC sees the phone (Qualcomm...) but has an ! against it. If you open that you should see l the option to update the driver.
Click to expand...
Click to collapse
Right but where's the update? From everything that I can find it is the most updated version
Angilias37 said:
Right but where's the update? From everything that I can find it is the most updated version
Click to expand...
Click to collapse
I use the driver (Qualcomm HS-USB QDLoader 9008) from https://www.catalog.update.microsoft.com/Search.aspx?q=qualcomm hs usb 9008
OK
BillGoss said:
Did you read my post (#2)?
Does your PC make a sound when you connect your phone to it in EDL mode? If so, try reinstalling the Qualcomm driver (though I've never needed to do that).
If you can get into bootloader, then you can try using the method in https://forum.xda-developers.com/t/guide-unbrick-or-restore-to-oos-using-only-fastboot.4289013/
Click to expand...
Click to collapse
Ok I take back what I said! That link with the CMDs worked!
I really don't know what I did differently, probably skipped a step or something, but I was able to reset my phone!
Still unsure what is going on with the drivers but the crisis has been averted!
Thank you BillGoss! You are incredibly helpful!
Hello!
For some reason msm connects and disconnects shortly after displaying connected on msm.
Is there any other way to downgrade to oos 11 from custom roms?
Restore OnePlus 9 to Stock via Fastboot Commands
This guide assumes you have the SDK Platform Tools installed and working, along with USB drivers for your device (if needed), and have your full update zip which you've already extracted the payload.bin from, and then dumped the images using...
forum.xda-developers.com
Diaze said:
Hello!
For some reason msm connects and disconnects shortly after displaying connected on msm.
Is there any other way to downgrade to oos 11 from custom roms?
Click to expand...
Click to collapse
If you can't get the fastboot thing to work (I bricked my phone three times with fastboot flashing because sometimes fastbootd doesn't seem to want to flash correctly), open up the MSM Tool, click lite firehose, click Start, and *then* put the device in EDL and plug it in. If you do it this way, the software grabs it as soon as EDL comes up and it's more likely to succeed in the handshake and successfully flash. I have noticed that the phone doesn't stay in EDL for long before it tries to reboot for some reason.
EtherealRemnant said:
If you can't get the fastboot thing to work (I bricked my phone three times with fastboot flashing because sometimes fastbootd doesn't seem to want to flash correctly), open up the MSM Tool, click lite firehose, click Start, and *then* put the device in EDL and plug it in. If you do it this way, the software grabs it as soon as EDL comes up and it's more likely to succeed in the handshake and successfully flash. I have noticed that the phone doesn't stay in EDL for long before it tries to reboot for some reason.
Click to expand...
Click to collapse
It's a safety feature to keep it from getting stuck in edl. I second the start thing. I open msm tool. Click target op and start then plug device . I understand the lite Firehose deal though.
mattie_49 said:
It's a safety feature to keep it from getting stuck in edl. I second the start thing. I open msm tool. Click target op and start then plug device . I understand the lite Firehose deal though.
Click to expand...
Click to collapse
You would think that it would stop trying to reboot once a connection is established to the software though but obviously this is meant to be a factory flashing thing where they just leave it running and just plug and unplug nonstop so it wasn't important to implement anything better.
Trying to flash my friend's phone back to stock but having some issues, you might have seen twixyfig's post in the OnePlus 9 Pro threads, but it's a regular OP9 and not the Pro.
Anyways, I have been trying to flash to working condition but MSM won't help. It keeps saying "No valid trg ID" and "Param preload" for a while now. This happened because we tried to root the phone but failed. The bootloader is unlocked, and fastboot works too.
TIA.
Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.
shadabkiani said:
Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.
Click to expand...
Click to collapse
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "
twixyfig said:
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "
Click to expand...
Click to collapse
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.
shadabkiani said:
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.
Click to expand...
Click to collapse
Thanks! Im gonna try this today and give you an update when something happens
twixyfig said:
Thanks! Im gonna try this today and give you an update when something happens
Click to expand...
Click to collapse
I think you were trying Indian MSM Tool. That might be the problem.
When your open MSM Tool, choose Others as login.
Write me in dm and I will help you, I think I can solve your problem
you can download OP9PRO India MSM tool(OnePlus_9_Pro_India_OxygenOS_11.2.4.4) and
1.unzip OP9Pro India ROM and download to your phone(select the firhose chebox)
2.if you success to download it,your phone will restart to the OOS.
3.Login your Google account and unlock OEM,then reboot your phone
4. install "Oxygen Updater", VERSION 5.7.3，you can find it on github.
5.download OOS for OP9 , archive name is "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip"
6.enter the oxygen updater,and flash "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip" to your phone
7.reboot and fixed!
PS: my english is so suck,try to read it!
good luck!