This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Reserved
Nice Guide, Can you please list MTK devices ????
421rahman said:
Nice Guide, Can you please list MTK devices ????
Click to expand...
Click to collapse
OK, Will be adding attachments later, Thanks
Salman
--
Thanks @Salman Al-Badgail for this use full info.
Deena Khanam said:
Thanks @Salman Al-Badgail for this use full info.
Click to expand...
Click to collapse
welcome & Thanks
@jamsubzero check this guide
@jamsubzero I saw your post and thread regarding Dead Bricked
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
Click to expand...
Click to collapse
NEVER DOWNLOAD ROM NOT MEANT FOR YOUR PHONE. IT WILL BRICK IT !
What you did is you flashed wrong firmware to your device and the result you in Dead Brick, However there is still solution for your problem. Please Please Please do a proper search first and download correct firmware and other necessary files for your device. Please check firmware number ok.
You can Flash it again but you need to open phone and try, Check here for better understanding.
GUIDE : HERE. Or else please go to any mobile shop and ask them to flash. Dont tell the original reason that you tried to flash or etc. Tell them that it stop suddenly and for now I am unable to access it. They charge you about 5-15 USD based on your country, for me they had charged 10U$D me for lenovo A3500-HV dead flashing. Hope this help you.
i got no scatter file in stock rom pls help!
Aller retour si flash tool
Hard bricked Lenovo a7000
**Hi I got problem on yesterday I was install ing new Rom but suddenly my Lenovo a7000 hard brick
It is not responding any point .even charging .and charging light also .it's dead
But it when I connet to my pc it's connecting sound conning from pc ....My phone is dead plaease help
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks [email protected]
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
S
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
Salman Al-Badgail said:
Reserved
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
im having mt8127 mtk device it is not flashing iam having corrupted preloader i tried to flash the preloader it is not flashing , can any body knows to fix it??
How can a phone that's bricked be switched off? Am a bit confused.
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
i am trying to flash vivo s7 and the cable shake and since then the phone is dead, have flashed it several time, it complete but it refuse to on
I need help please
Basically I was flashing updates for my CUBOT Nova and everything was going fine and I tried out this custom recovery which wouldn't mount any partition so it didn't really suit me. And I did this a dozen of times with other recoveries and if anything happened I had the firmware in SP tools ready to be flashed and if I could save going to it I just used the fastboot to flash it, and so I decided to completly stop and just put my phone back to normal and because I done it before I formatted the whole flash, (and FYI every 2 times I plugged in the phone powered off my computer always searched for drivers in the windows update but it failed and so everything still worked) but after I formatted it and plugged it out and in to download the firmware, my computer successfully installed the drivers and at this moment I was like shoot so I tried to download and it didnt recognise my phone and so I uninstalled the driver my computer installed and see if it worked and it kept installing it again, so I decided to uninstall every mtk driver I had and rebooted, when I installed every single driver again it tried to download drivers from the windows update but it failed and on the sp flash tools it goes to 100% on the Downloading DA (so the red bar) and stays like that for a while and I get notifications that I have a unrecognisable usb device and after a while it gives me randomly 2 errors 0xC0050005 and 0XC0060001 and I know someone is going to tell me I dont have the right firmware or that it's not the right ones but it isn't I got from the official Cubot website and I got an early versions from firmwarefiles I think and none of them work, now I just have a phone without anything on it and I cant flash anything on it until I just hope someone would walk me through what to do I would appreciate so much I'm sorry I wrote so much as I had to explain in max detail as I could what happened!
netcrafy said:
How can a phone that's bricked be switched off? Am a bit confused.
Click to expand...
Click to collapse
i wanted to say the same thing, also i tried enter EDL for 2 days DD (helio G80) LMFAO
Hi there
I would like to know if you can help me in repairing my device.
So i wanted to do an upgrade on the tablet and i messed it up.
I was on CMW recovery at first and then i did a format on cache system and data. but when i wanted to flash the rom CM14.1 it fail and the devices restarted.
the screen goes on but i can see faint lines on the screen.
I did make a back up of the rom and tried to flash it back but it didnt work.
I used all the roms and it still didnt work. I tried many SP flash tool and formating and still not working. every single rom has been flash and all are green but the phone does not want to boot. i have youtube and followed the instructions and every single step i can think of but u have a gut feeling i am mssing something.
I cannot write SN on the fone as it will not work. i have uninstalled all the drivers re-install all the drivers did all the instruction that you have provided but still it will work.
the tablet does still detect on the PC and it does work. so basically it is in a bootloop but its not powering up. Some suggested using MRT TOOLS or MIRACLES but i have a problem with that as it always have a virus attached it to and when i download it the pc removes it. so i dont know where i can get a good crack tool.
i really need your help if you can.
Hello Guys
i closed SP tool while flashing
my phone : infinix hot 10s
i cant power on it and cant join fastboot and cant join bootloader
When i connect phone by orginial usb
computer said (USB not recoginzed)
i installed all drivers but now phone is dead and he was rooted so i cant going to warranty
how i fix it?
Related
Hello,
I managed to brick my new Feiteng H7100 phone, i flashed wrong rom to it and got a greenish screen when trying to start the phone.
So i formatted the phone in SPFT tool "Format whole flash" and from then it stopped responding, i cant start the phone anymore, and the charging indicator wont light up when charging.
When connecting the phone to try and reflash it the computer recognizes that i have connected the phone to the computer, but flashing doesnt work.
It is the S7180 with 1GB ram.
I hope there is a solution to it and it can be fixed, iam not sure if this can be called had brick or soft brick.
Was very close to throw it out of the window yesterday, but then thought i can give it a chance
Thanks
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Mine is dead also
jemmars said:
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Click to expand...
Click to collapse
Same mine is completely dead after I flash it - Its not recognized by the originally drivers in windows 7. Showing up as an Unknown Device.
if it is showing up as an device, it isn`t bricked. you need to get the right firmware and flash it again. force install the drivers for the unknown device or take the drivers for Rom you flashed. (e.g. flashed wrong preloader from ZTE to a Star device, need to install ZTE drivers)
While I don't know the specifics of the Feiteng H7100, I've "bricked" many an android phone and tablet. Fortunately it's usually easy to fix.
1) Reboot the device into CWM Recovery Mode (usually by holding power and volume buttons at the same time)
2) Plug it into your computer & run "adb devices" - if you device comes up as a Recovery device, then you're probably home free
3) Run an "adb push newly_downloaded_cyanogenmod_rom.zip /sdcard/" - the data location (/sdcard/ in this example) might vary depending on your device
4) Wipe Cache
5) Install Zip from sdcard and choose your new_rom.zip
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM (Download)
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)(NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...[/COLOR][/B]
Download Links:-
[url]http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Drivers are added...
links are
http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Good work Bro . . .
suthar88.sunil said:
Good work Bro . . .
Click to expand...
Click to collapse
Thanks
Phone not connecting
greatpapa said:
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)
Method
1. Download all files on your PC and extract them on one place.
2. now you will have two folder name by "!Files_to_FlashTool" and "SP_Flash_Tool_v3.1312.0.139"
3. Now RUN SP flash Tool.
4. now click on "scatter-loading" tab.
5. now Select "scatter file"....Sp tool will list up all the component to flash.
6.now hit the Download button on SP...you will see an warning something like user data and cache are not loaded or something...just ignore it...and click on "Yes".and now you are ready to flash.
7. Now switchoff your phone (If it is on) and pull out the battery.
8. Connect your phone while battery is out.
9.After connecting your Phone insert your battery...
10. Sp Tool will recognise your Phone and flashing will start.
11. Green circle will show that flash is Done...
Enjoy
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Click to expand...
Click to collapse
My phone is not connecting. i tried many times. help me out plzzz..
Combination
vikphogat said:
My phone is not connecting. i tried many times. help me out plzzz..
Click to expand...
Click to collapse
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
http://www.mediafire.com/download/tnas2hjqruf2iht/SP_Flash_Tool_v5.1343.01_by_indiantitaniclover.zip
thanks dude..!!
greatpapa said:
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
Click to expand...
Click to collapse
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Dri
vikphogat said:
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Click to expand...
Click to collapse
New flashtool will recognise direct....Hope so...download new flash tool and try...
greatpapa said:
New flashtool will recognise direct....Hope so...download new flash tool and try...
Click to expand...
Click to collapse
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Powrer
vikphogat said:
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Click to expand...
Click to collapse
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
hard bricker karbonn a12+........
Great work and nice tutorial some how unbricked my phone 100% working
\\beginers dont post any spam without reading the complete tutorial as I did
thanks a lot for helping
not working
greatpapa said:
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
Click to expand...
Click to collapse
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Fastboot
Lovesahota said:
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Click to expand...
Click to collapse
Hello....
Try this one..
Switch off your mobile...
Now press volume up + Power button...
Then you will see three option something like Recovery, fastboot, factory...
You have to choose fastboot option...
when fastboot is selected then connect your phone to PC via USB cable...this will install some helpful drivers to your PC....and then again try the flash method without battery...
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Process DOne ?
nightcrawler218 said:
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Click to expand...
Click to collapse
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
greatpapa said:
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
Click to expand...
Click to collapse
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
How
nightcrawler218 said:
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
Click to expand...
Click to collapse
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
greatpapa said:
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
Click to expand...
Click to collapse
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Ummm
nightcrawler218 said:
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Click to expand...
Click to collapse
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
greatpapa said:
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
Click to expand...
Click to collapse
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Good
nightcrawler218 said:
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Click to expand...
Click to collapse
Don't worry....
Now your phone will be fine....As i will get time i will give you tutorial to write your IMEI number....Till then you can search and google it....your phone is ok...will recover it soon....
Hello everyone I have a few questions. First to say that I'm not new to android yet I don't think I'm very advanced. Anyway here is my situation: I have brand new chinese phone Cubot x6 which is with MT6592 chipset(or CPU I'm not sure). I rooted the device with Framaroot and everything was OK. Then I found CWM for the device on needrom(dot)com and when I flashed the recovery with "Flashify" it rebooteed but it is now stuck on the kernel logo. I can enter only in recovery which is still the stock one . I can't do anything except entering into the stock recovery. I have the stock ROM but it is NOT in a flashable .zip but in a folder which is used by some flashtool program (not the one for Sony but rather for MT devices) I have the stock boot.img, recovery.img and system.img. When I try to "apply update from sideload" and sideload either the boot or recovery images I get "installation aborted". If you guys can tell me how to enter fastboot mode and from there to flash system.img OR any other way to fix the phone please tell me.
P.S. The hardware buttons are only volume rockers and power button. I also tried to install MUIU but it can't flash it with stock recovery.
Please help me. I would be able to manage it somehow if I'm able to use adb, but I can't within the stock recovery.
hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Would it be possible for you to upload it to a different site? it seems that the download just cuts off all the time. I tried about 5 times after 10 mins it just stops. I bricked my phone the first day cuz i didnt know it wasnt compatible with Xposed installer
ZALACAYN2 said:
hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk
Thank you very much
ZALACAYN2 said:
http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk
Click to expand...
Click to collapse
I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
ZALACAYN2 said:
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S
@0xNOP nop,it doesnt take that long
0xNOP said:
I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S
Click to expand...
Click to collapse
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
http://www.htcmania.com/showthread.php?t=833168
[email protected] said:
@0xNOP nop,it doesnt take that long
Click to expand...
Click to collapse
Alright, thanks for letting me know, i know what is causing to behave like that, the thing is that the usb is abruptly getting disconnected, so when it gets detected it starts working like a charm and it starts detecting the phone in the sp flash tool, etc etc but when its about to start really doing anything like flashing or anything concrete the usb simply disconnects and I dont even see it anymore in the Device Manager list... And it appears as "Mt65xx Loader" in the Device Manager, for just few seconds before terminating... Might be that Im using the wrong drivers or The wrong cable ??? Or both??? I'm using an usb cable that was made for an HTC and it had assigned the drivers of my HTC phone... But at the same time, it uses that Mt65xx Loader driver thing that I installed as well...
ZALACAYN2 said:
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
<Link>
Click to expand...
Click to collapse
Hello, my first language is spanish also, so I understood the tutorial, however, you can refer to the reply that i sent to Qwerty, above, since the problem I think is on either the drivers im using or the cable itself....
Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...
[email protected] said:
Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...
Click to expand...
Click to collapse
Yup, Oh Lord, ty, I will really appreciate if you can give me a hand on this one and you're working on it alrdy so I'm really grateful :silly: :good:
Alright, conditions, it does shows signs of life, however, I can get past the boot logo, to the "main screen" where launcher is etc, etc... But the thing is that, since I was working on a rootkit, I disabled many of the processes that I saw were 'suspicious' by suspicious I mean (e.g.) "com.gogle.services" with version: "1.4" instead showing something like process: "com.google.services" with version (e.g.) "version: 4.4.22.493 build: 493823-22-1114" you see.
So I started deleting those processes and installed ES File Manager, which it has a built-in cleaner, so after I finished disabling those processes, I started deleting junk files like a mad man using ES File Manager, and I remember going to the root and deleting the majority of the folders and files that I saw, so probably that's whats happening
Now with that previous story told... Now when I get past the boot logo, I just get this plain black screen, with only the battery status showing up, like literally only that, and the top scrollable menu, I'm able to carry it down but it has no notifications whatsoever, when I plug in the USB (while the phone is on) I get nothing whatsoever from the phone to the computer...
Hope this info helps in debugging whats going on here
Reference: https://youtu.be/jfgDs9eSq0g
Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Edit : you know I'm telling you this because I believe you tried factory reset already ,if you havnt try it first.
Sp flash tool is for unbricking mostly.
[email protected] said:
Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Click to expand...
Click to collapse
Alright, thanks for the suggestions, I will try to do all of them and get back with results, hopefully with a fixed phone :S :S :S :good:
Just so you know ,I edited my previous post
[email protected] said:
Just so you know ,I edited my previous post
Click to expand...
Click to collapse
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!
0xNOP said:
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!
Click to expand...
Click to collapse
Glad it worked for you ,good luck
BTW if you like avoiding the default bloatwares you might wanna try a custom ROM like cyanogen .look up development for your phone in xda or 4pda
It took me days trying to make Doogee send me these files. I managed to unbrick my device with this firmware.
So I decided to post it here so anyone can unbrick ther Y100X.
It must be used with SP Flash Tool, here is the link to the thread: Flash Tool
This is the firmware :laugh: (extract with 7zip): --files removed--
For me it worked with the Format All + Download option.
-The firmware is stock and provided by Doogee. I got nothing to do with the making of the files. I also do not get paid for providing these files. I just wanna help others. -
Link sharing is on now. Sorry for forgetting about this.
thanks for el firmware, now how to get the root ... xD. My smartphone is underway yet, cost me $ 70
Root can be achieved through kingroot. But it is an app I personally hate, so I used some KingRoot to SuperSU apps and they worked,so good luck!
Many thanks for the original Firmware :highfive:
I hope there will upgrade to 5.1 or a dream.
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
nickless07 said:
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
Click to expand...
Click to collapse
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
ariss77 said:
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
Click to expand...
Click to collapse
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
thank you
Hi brother
Thank you very much for the ROM, it help me a lot.
nickless07 said:
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
Click to expand...
Click to collapse
Try to flash without the battery, rather than simply turned off the phone.
You my friend are a saviour.
Tried rooting and bricked my phone, Kingroot wouldn't work so tried the Kingo apk which bricked it.
Back to square one now so will wait for a verified root
Thanks :good::good::good::good::good::good::good:
Hi can with this repair an bootlop on the doogee nova y 100x .when i turnt off the phone ??
Sent from my Valencia2_Y100pro using XDA Free mobile app
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Hi.
I had the bootloop problem, and I've solved with this firmware. (Many thanks TheSpecialNoob)
In order to FlashTool detects the phone, needs to be power off, without enter in FlashTool mode.
Select a scatter file, choose "Format All + Download" and press Download.
Thats all.
Custom recovery Doogee Nova Y100X
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
zagzag99 said:
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Click to expand...
Click to collapse
It's a problem on all Y100X devices. Doogee must have messed something up in the build.prop I hope they release an official fix.
Carliv Touch Recovery v3.3 for Doogee Nova Y100X
fanjul said:
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
Click to expand...
Click to collapse
I auto-answer.
I found a Russian website, which explain how to install a custom recovery (Carliv Touch Recovery v3.3). :good:
I leave the link to the page. http://4pda.ru/forum/index.php?s=&showtopic=669833&view=findpost&p=42555995
If someone is not able to install it , I can try to explain it.
Also I have kept all the necessary files.
Regards
greetings from Spain
Thanks for giving us the original ROM.
I followed your steps and selecting "Format All + Download" I deleted the imeis and as I have read on the internet, also the NVRAM.
As I can do to permanently leave imeis? every time I have restored the ROM to modify and not know if I deleted more things to do a "Format ALL"
Someone I can pass the "NVRAM.bin" to upload it to my phone? Any other suggestions?
[email protected]
Regards
Yeah, I have the same problem. After restoring the stock rom, I have lost NVRAM settings.
Someone who has not restored the phone to stock, can upload the file nva.bin phone.
Thank you
Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..
limereyes said:
Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..
Click to expand...
Click to collapse
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.
Other method to physical format using spft?
Ashwinrg said:
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.
Click to expand...
Click to collapse
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Same problem with me, I also have an MT6580 device and I also first tried to:
(when I used SP Flash tool, it only fully worked in version SP_Flash_Tool_v5.1532_Win )
1) format the whole flash (in SP Flash tool)
2) only select preloader
3) flash (with Download selected, and phone volume + button pressed in and then connected USB to pc)
4) select all other (recovery, boot, system, ...)
5) flash
For me as well, nothing happened - the phone does not react when I try charging it, and pressing the power button has no effect.
The only advice I can give you is the knowledge that the preloader is in the fault - somehow the preloader on my phone before the flashing was different from the preloader in my stock rom. Perhaps it is the same data, but the address at which it is flashed is wrong. Don't bother yet with flashing the system, userdata or other images - if the preloader is not correctly installed, the phone won't recognize it when it tries to boot up, and the other system, recovery etc. images are useless.
Perhaps a good analogy is: say the preloader is the bios of a computer: if the bios fails to be loaded, then the operating system (android, windows etc - i.e. the system, recovery etc. images) will never be loaded either
limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers