Related
Hi all i would just like to share my experience with this case..Last week i had the unfortunate accident of dropping my Samsung galaxy s phone in the toilet at home...
The phone fell out of my pocket and straight in too the pan and finally landed in the u-bend.
The phone was in total water submersion for not more that 3-5 seconds..my heart fell to the floor...
I quickly grabbed the phone from the toilet..turned phone off and removed the battery..water was all inside the phone.
I shook the phone and lots of water came out..my thoughts at this time was phone was well and truly buggered.
I proceeded to dry the phone on my radiator at home..sim-card,sd-card,battery and back plate all removed to aide drying.
Left the phone to dry for a full 24 hrs...before attempting to turn phone back on.
There was condensation inside the phone which all dispersed after 24 hrs. of drying out the phone.
And the big moment arrived of putting the phone back together to see if it would ever work again....
My heart was pounding at this time hoping and willing the phone back to life..pressed the power on button and the phone came to life.
Apart from having to do a reset on the phone and re-installing all my apps there has been no problem with the phone working 100%.
Phone has been working for well over a week now with no problems.
How lucky was I??...Im not saying that the Casemate Toughcase is the be all and end all in cases but im sure it went some way in helping reduce the damage that would have been caused by water ingress in to the phone.
happy case hunting...
Ewwww That Dirty Samsung Galaxy S
Lol..must add the water in toilet was clean...
The tough case was not the parameter influencing the luck in this case. As long as the rear speaker hole is not sealed, the water will always have a way inside the phone, no matter how many shock protection layers you have o the phone.
And generally speaking, tap water is not dangerous for the electrical parts of low voltage powered devices (like watches, phones and so on). The main issue with phones dropped in water is that the water will infiltrate in the optical dispersers of the LCD screen and on the screen connectors, generating blurry pictures or no picture at all.
I've learned something from your experience ... the water will not go in between the OLED screen and the digitizer .. which is a GOOD thing.
Great! I'm glad your SGS survived!
just take more care of it, ok? and don't drop it on Sea Water!
any waterproof supplies for galaxy s?
alex.bacer said:
any waterproof supplies for galaxy s?
Click to expand...
Click to collapse
Zip-lock bag?
I've almost fell from my seat reading the end of your story. I am glad to read that everything went Ok. But does the phone smell .... hmmm different?
Truly lucky.
Sent from my GT-I9000 using XDA App
There are better ways to change the colour of the phone
Update phone still working a OK two and a bit weeks on...
I have toughcase as well. Not the prettiest case, the phone loses it's "luxury" feeling, but you can certainly throw around the phone no problem.
I dropped my Galaxy S (with Tough Case) today, it fell directly on my hard tiles floor at a height around 70cm. I was really freaked out! I picked it up and it was still there like nothing happened (no crash, no slow, no reboot, no nothing) really happy that I chose this case!
thanksss a lot for content
Hi there,
I have the Sony Smartwatch 2 since it was just released.
I ordered it via the Sony website, so it was delivered from Czech.
Anwyays... the Smartwatch 2 worked pretty fine for me so far.
Unfortunately, I experienced something strange yesterday.
Yesterday I noticed that the on/off button wasn't working properly anymore.
I wondered how this was possible, and then I noticed that the screen was a little bit lifted out of the case.
I could push the screen back in place, and the on/off button worked fine again too, although it seems it comes back up a little bit after a while.
I have seen this before in a video where they showed the watch at a conference, so it seems to be a common issue.
Does anyone have this too? and what did you do to solve it? Because I would hate to send it back.
Right now I'm actually waiting till it comes off a bit more, so I can place a little tip of glue beneath the screen (if there is a safe place for that beneath the screen), so it won't lift up again.
I had it too.
I put a little pinch of glue in the rear of the watch and all is good now.
its not the screen lifting. The actual watch hardware is glued into a frame of the wrist band. The glue is simply coming undone.
Yep, I've been able to completely push the watch out of it's frame.
Used some glue on the frame, and pulled it back in.
Let's hope it stays there now.
The glue that was on it already propably became loose when I took the watch under the shower?
Although... it should not do that, because it's waterproof.
Them problem as with mine, I got the watch off my arm and the clock pops out off the holding
Gesendet von meinem Nexus 4 mit Tapatalk
Be warned. Mine was destroyed when it got wet.
They aren't very waterproof.
worwig said:
Be warned. Mine was destroyed when it got wet.
They aren't very waterproof.
Click to expand...
Click to collapse
I've been under the shower for a few times with it, so it's definitely waterproof.
Although, that the glue came loose might be the result of that.
worwig said:
Be warned. Mine was destroyed when it got wet.
They aren't very waterproof.
Click to expand...
Click to collapse
This is definitely BS. I shower with it every single day and didn't have any problem at all.
joshoon said:
I've been under the shower for a few times with it, so it's definitely waterproof.
Although, that the glue came loose might be the result of that.
Click to expand...
Click to collapse
Maybe if you shower 50 minutes with boiling water... I repeat, I think I had like 60 showers with the watch on (and even pressing the power button or tinkering with the screen to change song etc.) and zero problems.
Sent from my C6833 using Tapatalk 2
fastest83 said:
This is definitely BS. I shower with it every single day and didn't have any problem at all.
Click to expand...
Click to collapse
Not BS. I just received my replacement watch. I felt the original vibrate, looked down, and watched the screen fade out. Never to come back after 4 days of drying it out with a small fan on it.
I am rubbing silicone grease in the cracks and charge plug on the replacement. I ride a motorcycle year round. I need some water resistance and my first one had very little.
It's SONY.. What do you expect?
Sent from my XT926 using Tapatalk
abuttino said:
It's SONY.. What do you expect?
Sent from my XT926 using Tapatalk
Click to expand...
Click to collapse
It's my first Sony device, so it's not a good device to impress people who are new to Sony hahaha.
But I love the Smartwatch though
SONY is for target practice. You spend about $750 on their latest technology and then have it work for about 2 years at the most, then put it up on a pedestal to play target practice with your new .9mm. You get to vent the frustrations of buying such an expensive and overpriced device and promise yourself you won't do it again.
When they talk about cheaply designed, overpriced, Chinese assembled items on Black Friday, they are talking about SONY.
I saw posts before about screens popping out, but thought it was just that and hoped it wouldn't happen to mine
wish I had read this topic before, I have the exact same thing, this build quality is REALLY poor
seems this is happening to quite a few people, I think they used the wrong glue
would certainly explain why the watch isn't waterproof for everyone
I have a problem with my watch, I broke the screen and I cant find the replacement, if you have a unusable sw2 maybe you can sell me the part that I need, please PM with any response, thanks
Hi, im thinking about buying this phone because my Nexus 5 battery is horrible, the Z3 looks so good and the specs are good, however, im seeing lots of people saying that the glass on back or front cracks by itself, can you guys please post if your glass has broke and how long you have owned the phone
I have the original z and Z ultra. Had drop the ZU three times and 7 times on the z.
The ZU has not cracked, but the Z back glass did after falling into concrete, the back glass replacement only cost less that around US30.
Sent from my D6653 using XDA Free mobile app
No, the glass is shocking!
107bird107 said:
Hi, im thinking about buying this phone because my Nexus 5 battery is horrible, the Z3 looks so good and the specs are good, however, im seeing lots of people saying that the glass on back or front cracks by itself, can you guys please post if your glass has broke and how long you have owned the phone
Click to expand...
Click to collapse
had my phone for 4 days, dropped a short distance and it smashed like it'd been hit with a hammer! I definitely wouldn't have bought one if I'd realised! Sony customer experience was AWFUL! They've had the phone longer to fix (by weeks!) than I've had use of it! Back to Iphone for me!
The glass cracking thing is pretty rare and mostly the back glass. I would not worry about that. Its like worrying about the LG G3 cracking near the mic or dust under the M8 front camera module, both of which are also extremely rare. If you dig deep enough you won't be able to buy any phone, including the iPhone 6, which has a high defect replacement/exchange rate at T-Mobile due to the sheer volume of sales of course.
czthompson said:
had my phone for 4 days, dropped a short distance and it smashed like it'd been hit with a hammer! I definitely wouldn't have bought one if I'd realised! Sony customer experience was AWFUL! They've had the phone longer to fix (by weeks!) than I've had use of it! Back to Iphone for me!
Click to expand...
Click to collapse
I got the z3. My wife had the iPhone 6 for about 60 hours, dropped it once and the screen was completely shattered. Shards fell out. Every phone can break when you drop it once.
bump
I've dropped mine onto marble tiles from a metre about 4 times and nothing. The glass is fine. All the haters will say it's going to shatter from heat/cold or blowing on it, but it's nonsense.
This phone has a lot more to worry about than cracking. That's one thing I know will not happen.
Seems like the front and back glass are not from 1 manufacturer. Had my phone for a month and noticed several scratches at the back. I think i got this when i put the phone on the laboratory table which was made of ceramic tiles. I carelessly put it and drag it (short distance only) trusting that the glass is strong. The front is pretty strong.dropped the phone several times from my bed to the floor with it's face down and no scratches on the front
Sent from my D6633 using XDA Free mobile app
Yeah, within a week I've already gotten scratches on the back. The front is fine though.
Sent from my Z3
People saying that the front or back cracks by itself and then the screen does not work
107bird107 said:
People saying that the front or back cracks by itself and then the screen does not work
Click to expand...
Click to collapse
People are saying that an omnipotent man sent his son to earth to save us from eternal pain
My front screen is fine. Back cracked on its own a few days after getting it. Got some deep scratchs on the back from sand on table at beach today and general scuff marks from everyday usage. Front is fine; no scratches or anything
Cracks don't seem to be too common though
Slipped off my bed and landed on a plate, back glass cracked from top to bottom, left to right. I only had it for a couple weeks.
Sent from my D6603 using XDA Free mobile app
Does anyone know how much it costs Sony to replace it? They won't say onnthe phone.
Yeah they won't until they see it just in case there is more than meets the eye. LG did the same to me when I dropped my G2 and screen shattered.
Back on topic, the back can be purchased for between $20-30 so at local repair shop it shouldn't cost more than $40-50 if you want some one to repair it for you.
If you want to do it yourself you will need a heat gun to loosen the glue and a suction cup or guitar pick etc to take out the back panel, also you would need to have glue to put the new one in. I forgot to mention, you have to detach the NFC pad from old panel and put it on the new one.
You better just give it to some one to repair it for $40-50 if you are not willing to do the above.
abhinav.tella said:
Yeah they won't until they see it just in case there is more than meets the eye. LG did the same to me when I dropped my G2 and screen shattered.
Back on topic, the back can be purchased for between $20-30 so at local repair shop it shouldn't cost more than $40-50 if you want some one to repair it for you.
If you want to do it yourself you will need a heat gun to loosen the glue and a suction cup or guitar pick etc to take out the back panel, also you would need to have glue to put the new one in. I forgot to mention, you have to detach the NFC pad from old panel and put it on the new one.
You better just give it to some one to repair it for $40-50 if you are not willing to do the above.
Click to expand...
Click to collapse
I am more than comfortable doing it myself. I did it on my Z. I have everything I need including guitar picks. Everything I find basically says that you can't guarantee a water tight case with aftermarket backs. Also if Sony does it, it's water proof again. I just don't know what to expect....$50......$100.....200. If it's a ton than I won't even bother sending it in to find out. I'm wondering if anyone has ever sent in a Z series for back glass?
If you search the forum, I recall someone had it done for $40-50 if I am not mistaken. It will definately will not cost $100, your pushing into display/digitizer assembly territory at that price.
I've had my phone slip off a couch and a tv dinner table onto hardwood floor and each time the phone has been fine. No dents or scratches that I noticed.
Planning to get a cheap back protector so it's not so slippery.
Glass is easy to crack. I accidentally drop my phone from 0.5m high facedown and right bottom corner front LCD was cracked called Sony Center and the price is $250 for the LCD and whole bezel thing. Pain in the A double S
Painful indeed, Corning is advertising their new GG4 as 2x better for impacts, in their ads they show gorillas dropping phones face down lol. I wish we had that.
I wanted to create this topic because I am curious and because I see many people asking if this phone isn't too fragile or has QC issues. I believe that the people with problems are the vocal minority but the best way to find out is to have a poll.
So, have you found any faults or is your device right as a little (Xperia) ray of sunshine?
You can select more than one option.
1st phone: defective camera (purple noise)
2nd phone: USB flap misalign when closed
3rd and current phone: so far so good
My first phone's screen had an area in a line from top to bottom, right of centre that had no touch sensitivity. The area was about .5 cm wide.
I couldn't touch anything on the line or drag anything across it.
I contacted Amazon.co.uk and they sent me a new one right away. They also let me hang onto the defective one until the replacement arrived without charging me.
Awesome! thanks for the replies so far! Please keep them coming!
My phone is perfect. The USB flap is a teeny tiny bit, like a fraction of a milimeter, misaligned but the seal is intact, I do not intent to take my phone into the pool anyway and thought it was pointless to go through the hassle of returning an otherwise flawless phone for something half of my friends can't see when I point it out. My carpenters eye is ridiculously accurate so meh.
The back glass scratched a few hours after removing cover. Ive only has the phone for 2 days and Bell wont take it back with damages. The phone has only ever been in my otherwise empty pocket...
Anyone else experiencef this? I thought both were gorilla glass.
I don't think the back is as scratch resistant as the front, as I too have very minor scratches on the back, using front and back tempered glass protects now.
My unit only has a slight annoyance which is the headphone jack is wobbly. It has about less than 1mm of wiggle room. I can see a gap between the metal body and the Jack. The Jack works perfectly currently.
Don't know if it's worth bringing to the Sony store, or to just seal it with some super glue or something. :/
Took some underwater pictures at the aquarium, thought it'd be cool.
Sending my phone into Sony to get a warranty replacement today.
xxquicksh0txx said:
Took some underwater pictures at the aquarium, thought it'd be cool.
Sending my phone into Sony to get a warranty replacement today.
Click to expand...
Click to collapse
I assume water got in?
hanime said:
I assume water got in?
Click to expand...
Click to collapse
That's what I'm assuming. I could also hear air bubbles when squeezing my device... :/
It worked fine for a while, I even rinsed it off in the sink after exposing it to the water. (It was fresh water, but there were fish in it) No more than 6 inches submerged for like 30 seconds. Was going through the pictures and the touchscreen just stopped working.
xxquicksh0txx said:
That's what I'm assuming. I could also hear air bubbles when squeezing my device... :/
It worked fine for a while, I even rinsed it off in the sink after exposing it to the water. (It was fresh water, but there were fish in it) No more than 6 inches submerged for like 30 seconds. Was going through the pictures and the touchscreen just stopped working.
Click to expand...
Click to collapse
In reality, from what I have read, some are not waterproof out of the box. So sad to hear this when Sony advertised this phone as waterproof. Before submerging, did you try the water test via software (pressure sensor)?
hanime said:
In reality, from what I have read, some are not waterproof out of the box. So sad to hear this when Sony advertised this phone as waterproof. Before submerging, did you try the water test via software (pressure sensor)?
Click to expand...
Click to collapse
Yes(Although I don't really think the test proves the waterproofness), I had also had it completely submerged for 10 minutes when I bought the device.
xxquicksh0txx said:
Yes(Although I don't really think the test proves the waterproofness), I had also had it completely submerged for 10 minutes when I bought the device.
Click to expand...
Click to collapse
This really sucks because there is no way we can tell if it is waterproof until we really submerge it. I am going to avoid submerging mine at all cost.
Hi
I had some problems with this new phone.
1: no nfc working
2: horizontal section from 9 to 177 of the touchscreen doesnt work properly
So i get a third replacement by SFR (in France) and I think I get a fully working Z3.
I love the advertisement of Sony for ils Z3 in France : demand perfection (exigez la perfection)!
I've had 2 copper Z3's. First one, front glass shattered whilst in my front left pocket, nothing else in the same pocket. I've carried all my phones in the same manner and never had an issue. Also had the pink spot issue.
Second phone has 2 stuck pixels.
I really like the phone. They just don't like me
Got a replacement from T-Mobile, the camera button seems to be stuck.. Only works like 20% of the time. Instead of feeling like a dual stage button, it's just a single press with no tactile feel.
When in the camera app it either does nothing, or is stuck trying to focus repeatedly.
Has the same issue with the glass coming up on the back as well. Definitely feels and sounds as if adhesive it being "pulled apart" per se.
Also, the flaps seem to be a little mis-aligned.
My T-Mobile must have gotten a bad batch...
If you have a misaligned usb flap, will replacing the flap with a spare one fix it or is it an issue with the frame?
First one I got in store, noticed the power and volume up buttons were stuck and wouldn't click, the next one's speakerphone didn't work, now this one's camera button is stuck and doesn't have the two stage shutter and can't take photos in the stock app. I still prefer the phone over any other currently out.
Edit: I got mine through t-mobile.
UPDATE: The camera button has come unstuck and works fine now, though it does get a little stuck still.
Two display/screen issues :
- Screen burn-in all the time : status bar and home button more particularly. I strongly suspect a defective screen : I send my Z3 back to Sony, and they did... a software update ! I'm kind of curious about what they did exactly because my phone was completely updated. Of course, it didn't solve anything...
- Strange parasite lines surrounding text lines. Probably a software issue. I'm waiting Lollipop to see what it gonna do on my phone.
Sent mine in for a screen repair in the USA. Its a d6603 international version that is rooted and an unlocked boot loader stock. They just informed me that they cannot fix due to it not having the correct software and it not being a US phone.
Because this is what happens... :crying:
My bag was sitting on the floor. When I took my phone out, it slipped out of my hands and, from a height of approx. 30cm it dropped onto the wooden floor. I did not expect this damage.
So, if you want to enjoy your X Play a little longer, be careful!
gewe said:
Because this is what happens... :crying:
My bag was sitting on the floor. When I took my phone out, it slipped out of my hands and, from a height of approx. 30cm it dropped onto the wooden floor. I did not expect this damage.
So, if you want to enjoy your X Play a little longer, be careful!
Click to expand...
Click to collapse
My moto x play dropped from a height of 3-4 feet on concrete floor a couple of times but survived.... Bcoz i use a case with my x play.
Moral of the story: Put a case on your moto x play [emoji23][emoji23]
Sent from my XT1562 using Tapatalk
Obviously you should have had a Case on.
There were two reasons not to use a case:
1. In the past 10 years I never had my phone damaged.
2. I also use it in my car for navigation. With a case it doesn't fit in the Brodit mount.
I now learned that point 1 is no guarantee for the future. I ordered a Moto G5S Plus. I will look for a case that can be put on and off easily.
Happened the same, it slipped from my pocket and the screen is broken on the left bottom corner.
Hopefully, I still can use the phone but I'm looking for a new one and a screen replacement on eBay.
I found a third reason not to use a case.
3. I'm not clumsy.
my moto x play has been dropped many times, went into the toilet and barring a small white spot and a couple of minor dents to the side it still lives i guess tiles are weaker than wood ??? (P.S :There is a reason why the first motorolaphone i bought was the Motorola Defy Plus ).
gewe said:
Because this is what happens... :crying:
My bag was sitting on the floor. When I took my phone out, it slipped out of my hands and, from a height of approx. 30cm it dropped onto the wooden floor. I did not expect this damage.
So, if you want to enjoy your X Play a little longer, be careful!
Click to expand...
Click to collapse
I also dropped my MXP from 3-4 feet and my phone still survived "I was not even using any case" also
gewe said:
There were two reasons not to use a case:
1. In the past 10 years I never had my phone damaged.
2. I also use it in my car for navigation. With a case it doesn't fit in the Brodit mount.
I now learned that point 1 is no guarantee for the future. I ordered a Moto G5S Plus. I will look for a case that can be put on and off easily.
Click to expand...
Click to collapse
ksolowoniuk said:
I found a third reason not to use a case.
3. I'm not clumsy.
Click to expand...
Click to collapse
I agree with you. I never damaged my phones and I'm not clumsy too, but the main reason for me to don't use any case is because the phone don't fits well on my car mount (with case, no way). Another minor reason is because I like to feel phone body and mainly it's buttons (power for e.g.), but it's completely personal, nothing scientific
My mxp dropped two times and only the body got some damage (tiny cracks in corners).
ksolowoniuk said:
I found a third reason not to use a case.
3. I'm not clumsy.
Click to expand...
Click to collapse
https://imgur.com/a/B6C2N3j
Would this be irony?
Ahah. Karma !
Joke apart', you're not often clumsy, but when you are, wow, screen is totally destroyed !
Unfortunately, only Nokia 3310 didn't need any cover.