Honor 8 bricked Tried everything - Honor 8 Questions & Answers

So I was trying to flash this roll back package to MM on my honor 8 FRD-L19
And boom I was stuck in a boot loop , no battery charging
No dload method working , nor the recovery.
So here's the deal
Frp- locked
Bootloader- locked
I can only get to the fastboot and rescue mode but then I can't flash anything , not even oem unlock
Every command execution gives an error : Failed ( remote command not allowed)
Please somebody help !

No, just the roll back ! After that I was at the bootloop and couldn't do anything about it.

Rommco05 said:
U flash both rollback mad Marshmallow, right? Both was successful done?
Click to expand...
Click to collapse
Rommco05 said:
Put to dload full firmware of Marshmallow from official site, or u try already?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
U use right rollback packages, it seems like no
Click to expand...
Click to collapse
The dload isn't happening, I'm not sure what went wrong. I can't access dload , only fastboot and rescue mode and then can't flash anything. Shows an error Failed ( remote command not allowed)

How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.

Rommco05 said:
I can unlock bootloader via fastboot, hopefully will unlocked frp too after flash twrp
Click to expand...
Click to collapse
After rollback of small update.app the frp and phone is locked ,we can again unlock it , i did it just a hour ago.

FRD-L09 bootloop after downgrade to B131
Hey folks!
I have similar problem with my FRD-L09. I succesfully downgraded to MM via the 73mb rollback package and the B131 ROM. The phone worked prerfectly. After that I plugged the phone to the charger. When i wanted to grab it noticed the phone keeps restarting and stucked in bootloop. I cant even turn it off
I tryed to get in the recovery menu with the volume up+pwr button combo, but it doesnt work, the phone restarts and shows the boot logo again. If i try to restart and go into the update menu with the 3 buttons method the screen goes black, after a several minutes the phone reboots...
Do you have any idea how can i fix my phone?
Thanks in advance,
Mark

venugopalu007 said:
How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.
Click to expand...
Click to collapse
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then

Rommco05 said:
When phone start rebooting hold vol up, if u boot to recovery make factory reset
Click to expand...
Click to collapse
Yep, i tried that. I cant get into the recovery. As i wrote, it didnt work because of the phone rings and restarts itself.

Quick question: where can I get the official Honor 8 FRD-L04 firmware (USA version)? I have a phone I'm trying to put stock MM firmware on, I'm able to get into fastboot mode. I just want the firmware that is suitable for that phone version. I need a flashing method that will give me zero errors, as in if I flash something like "SYSTEM.img" I won't get uploading errors.
Status:
Bootloader: locked
FRP: unlocked

Rommco05 said:
You can find it in development section and thread is named all stock firmwares or something like that, here is the for you. Is good frp unlocked
Click to expand...
Click to collapse
Ok, but I need a guide that actually works. I have the official firmware, I just need to flash it with no problems. I've tried many tutorials from youtube but none of them have worked. The "Vol - Vol + Power" button method doesn't work for me. I have also tried Huawei Multi-tool and all I get by using the unbrick function is "FAILED(partition error, or sparse write failure). I can go into erecovery mode, but everytime I try to restore it says "getting package info failed".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

amansaini said:
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then
Click to expand...
Click to collapse
Then after do a big dload of official firmware , your phone will be unbricked.

Rommco05 said:
Ok, your last firmware was Nougat and you have successfully installed rollback packages?
Click to expand...
Click to collapse
I haven't been able to install any kind of stock firmware, that's the issue. From the image I uploaded I'm having trouble flashing the 2 stock files "CUST.img" and "SYSTEM.img". They simply don't go through.

Rommco05 said:
You have FRP unlocked what is really good. U can unlock bootloader and flash twrp after via twrp install firmware, what u think about this?
Click to expand...
Click to collapse
That's good, and I just installed TWRP. Is there a .zip file to be able to flash the official firmware? I have Update.app but its not in .zip, can I rename the extension and try flashing as update.zip?

Rommco05 said:
Which twrp excatly u have installed, is a important. No u cant I send u zip but need to know twrp version
Click to expand...
Click to collapse
TWRP 3.1.1

venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
sir , its not happening , Dload is not working , i am also trying two buttons while attaching to usb, still nothing ,again it got to the honor screen and stuck in bootloop and then restart.
when i dload , it just shows the red charge bolt sign and then the led flashes 4-5 times and then off

Rommco05 said:
Ok, last question. Your model is FRD-L04C567, right? If yes download this two zips :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72309/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...09/f1/full/hw/usa/update_data_full_hw_usa.zip
Flash first region zip and after update zip. After instalation go to reboot and make reboot recovery. Now u will be in stock recovery and tap factory reset, after reboot, probably now you boot to rom
Click to expand...
Click to collapse
Thank you so much for this guide and for providing the files to flash the stock ROM. It worked! Can I relock the bootloader after as well? To get rid of that message saying "this phone can't be trusted".

venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
Rommco05 said:
Youre welcome, no problem yes sure you now can relock >> fastboot eom relock yourunlockcode
---------- Post added at 08:11 ---------- Previous post was at 08:09 ----------
Leave him fully discharged if this dont help I think u need to go service. How this happened? You can use your warranty?
Click to expand...
Click to collapse
i can't go to the Customer care since i'm in India and only USA cc can attend to it.
I'm trying after fully discharge too. the most i get is a green charging circle which says 6% and then it reboots or i think try to boot further automatically then it goes to boot loop again and we are at square one

One last question: after the stock 7.0 installation, I wanted to install the B385 update of EMUI 5.0, I tried the automatic method but the message I get is "Failed to check update package". Is there a solution towards this that can enable this update to install?

Rommco05 said:
Can u post screenshots which exactly u want install? Basically if u want manually install some firmware must be labelled with -PV on end name of firmware
Click to expand...
Click to collapse

Rommco05 said:
Try this one which I select
Click to expand...
Click to collapse
Where can I get the firmware? And the installation method? I don't have Firmware Finder.

Related

[q] rescue mode

Hi guys,
I'm in a trouble....
I own a TL10 phone..
flashed international system and recovery and fastboot..
after rebooting..
now is in rescue mode
"error:
func NO: 10 (func_boot_recovery)
ERROR NO 2"
tried to connect to hisuite tool but it doesn't recognise the device...
tried a restore holding power + vol+ + vol-
but it fails..
any help?
Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app
Or try connect.to HiSuite?
Simona Simmy said:
Or try connect.to HiSuite?
Click to expand...
Click to collapse
Hisuite doesn't recognize the ham7!
tuddu said:
Did you tried 3buttons method? If now working, you must find the way to flash the stock recovery (correct one) trough adb commands (provided that your PC recognise the HAM7 via USB).
Sent from my S5+ using XDA Free mobile app
Click to expand...
Click to collapse
3 buttons starts the update but it stops after a couple of minutes..
adb i don't think it will work..
this is the situation:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?
Rescue
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card
Simona Simmy said:
Did u check that link what is on your screen faq user guide how to ? You might read out something from there..
Do you have stock recovery flashed ? Or you have CWM flashed currently ?
Click to expand...
Click to collapse
spyuz85 said:
Same problem, Solution: Download the last firmware on the huawei site support e load it on microsd card (with folder). Insert sd card e then press 3 button to upgrade/restore firmware from microsd card
Click to expand...
Click to collapse
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..
tufoz said:
tried but nothing happen with 3 buttons procedure..
start the upgrade then stops..
Click to expand...
Click to collapse
maybe i had the cmw recovery.... actually i don't remember..
3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.
tuddu said:
3buttons procedure works with stock recovery only. Download your ROM (right one) from the official website, extract the RECOVERY trough the proper software (search in this forum for it) and glash the stock recovery in place via adb commands.
Click to expand...
Click to collapse
adb device .. no device in my list..
so it's bricked!
Try reinstalling the usb driver. Try another pc windows. When "adb device" is shown, you're done.
Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...
EzerchE said:
Hello, I just bricked my phone yesterday, i have just figured out how to enter fastboot mode while its bricked!
Just do this;
connect your phone and see bricked rescue mode screen,
while the phone is connected to pc, press and hold: Volume Down + Power buttons.
but i still cant repair the rescue mode...
Click to expand...
Click to collapse
Hi, did you manage to repair your phone, i have the same problem.
omarbas said:
Hi, did you manage to repair your phone, i have the same problem.
Click to expand...
Click to collapse
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.
EzerchE said:
Sadly no. I dont think there is a solution for that at least for now, because the missing files or modules cannot be flashed via fastboot i think.
I flashed all img files I can, but it didnt work. May be a custom rom with zip file can work, but there is no custom rom with android-info.txt for Mate 7.
Click to expand...
Click to collapse
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74
omarbas said:
Hi,
I found this custom roms might work, if it work with you please let me know.
http://huaweinews.com/2015/03/mate-7-custom-rom/
http://www.needrom.com/download/ascend-mate-7-mt7-ul00-miui/
http://www.romzj.com/rom/26138.htm#rom-des-title
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=74
Click to expand...
Click to collapse
I dont have the bricked device anymore, I returned it to seller.
EzerchE said:
I dont have the bricked device anymore, I returned it to seller.
Click to expand...
Click to collapse
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...
dekraan said:
Hi all,
I had the same problem after flashing the wrong recovery.img.
I was on CWM.
What I did was simply download the right CWM image, and flash it using flashify, after exiting the rescue mode through power and volume down...
Click to expand...
Click to collapse
If we can't get the phone to boot then we can't use flashify
I have same problem is there any one fix it
Hi did you try one-key recovery via Hisuite i think this will resolve you problem
Download the chinese version of hisuite (4.0 i think), in the welcome panel there is a button called one-key recovery this will flash the rom of your device.
you have to put your device in fastboot mode
hope this will help you

BLN-L21 isnt booting

my honor 6x isn't booting normally. i get in the eRecovery menu every time I boot.
Bootloader is unlocked
Twrp installed
I search for 2 hours now but I can't find the stock firmware of the honor 6x
I think if you use the options in the eRecovery, you should be able to restore it to factory settings. But, I have not used this function, so I could be wrong.
However, even with twrp installed I am unable to use a buttom combination to boot into it. The only method that works for me is rebooting into it with a reboot app (root) or via adb reboot.
When I use the volume up + power button combi it boots into the eRecovery instead of twrp.
Mvs1989 said:
I think if you use the options in the eRecovery, you should be able to restore it to factory settings. But, I have not used this function, so I could be wrong.
However, even with twrp installed I am unable to use a buttom combination to boot into it. The only method that works for me is rebooting into it with a reboot app (root) or via adb reboot.
When I use the volume up + power button combi it boots into the eRecovery instead of twrp.
Click to expand...
Click to collapse
i get an error when i try to download and recover on eRecovery
h4rd1337 said:
i get an error when i try to download and recover on eRecovery
Click to expand...
Click to collapse
give another try..
flash twrp again and reboot system
once done., now use a command to go to recovery
thilak devraj said:
give another try..
flash twrp again and reboot system
once done., now use a command to go to recovery
Click to expand...
Click to collapse
I can go to twrp but my system doesnt boot up
I get the message 'your device has Been unlocked and cant be trusted'. I wait 5 seconds and it i See the honor Logo for a second and then i get the message again and then i redirects me to 'huawei eRecovery'
When i press 'download and recovery' it connects to wifi and says 'getting package info Form Server' after a second i get an error and it says 'getting package info failed'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i press 'cancel' and then 'reboot' it does it again
h4rd1337 said:
I can go to twrp but my system doesnt boot up
I get the message 'your device has Been unlocked and cant be trusted'. I wait 5 seconds and it i See the honor Logo for a second and then i get the message again and then i redirects me to 'huawei eRecovery'
When i press 'download and recovery' it connects to wifi and says 'getting package info Form Server' after a second i get an error and it says 'getting package info failed'
When i press 'cancel' and then 'reboot' it does it again
Click to expand...
Click to collapse
reboot to booloader and flash twrp again
thilak devraj said:
reboot to booloader and flash twrp again
Click to expand...
Click to collapse
twrp works now
h4rd1337 said:
twrp works now
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
and what now?
h4rd1337 said:
and what now?
Click to expand...
Click to collapse
go on and flash a custom rom..
thilak devraj said:
go on and flash a custom rom..
Click to expand...
Click to collapse
the problem is that i cannot find a custom rom for the honor 6x
h4rd1337 said:
the problem is that i cannot find a custom rom for the honor 6x
Click to expand...
Click to collapse
uh, oh , my bad..
Sounds like only way is to use fastboot to reflash factory images.
There are no custom roms yet. When you get the unlocked warning, just press the power button again, as it should state in the message. Then it should boot normally, i think/hope.
h4rd1337 said:
the problem is that i cannot find a custom rom for the honor 6x
Click to expand...
Click to collapse
Not really a problem as there are no custom roms yet
Dealing with similar issue with my L24 I had everything working great. Debloating the rom and edited build.prop.. but then I got update to su binary and rebooted. Then edited build.prop again and that was the end of her haha.
Now, in TWRP, it will not mount anything. Get error 8 and error 1? Tried the format data option under wipe, can't mount. Tried wiping data, can't mount. Tried cat /etc/fstab and data was different than other partitions. dev/block/dm-0 while all others were something like mmblk041... Any ideas?
Maybe the rm -rf option? I've ran out of things to google haha.
tre717 said:
Dealing with similar issue with my L24 I had everything working great. Debloating the rom and edited build.prop.. but then I got update to su binary and rebooted. Then edited build.prop again and that was the end of her haha.
Now, in TWRP, it will not mount anything. Get error 8 and error 1? Tried the format data option under wipe, can't mount. Tried wiping data, can't mount. Tried cat /etc/fstab and data was different than other partitions. dev/block/dm-0 while all others were something like mmblk041... Any ideas?
Maybe the rm -rf option? I've ran out of things to google haha.
Click to expand...
Click to collapse
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
thilak devraj said:
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
Click to expand...
Click to collapse
Ahhh didn't think about that... Will try when I get to work... Better internet there haha.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
Have anyone seen this.. I have no idea how I did it lol. Some how the build. prop was changed??
My 6x is now a "Berlin" when connected ??
tre717 said:
Ahhh didn't think about that... Will try when I get to work... Better internet there haha.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
Have anyone seen this.. I have no idea how I did it lol. Some how the build. prop was changed??
My 6x is now a "Berlin" when connected
Click to expand...
Click to collapse
lol.. :laugh::laugh:
thilak devraj said:
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
Click to expand...
Click to collapse
Downloaded the B170 firmware. And unpacked the update file. Fastboot flash boot system cache and recovery images..
So far so good!! There are some differences in the apps and added features? Has a step counter. I dont remember seeing a step counter in my orignal firmware.
Sent from my HUAWEI hi6250 using XDA Labs

(Im sorry) Cannot for the life of me get my phone up and running again.

I've tried like heck to find the answer before asking but to no avail. I'll keep it short:
- Phone will not boot, comes up to blue Honor boot screen, shuts off and immediately comes back on, off, on, off
- Can get to Fastboot (blurry image attached)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- device is locked, usb debugging is off (was attempting return to stock)
- CMD shows fastboot device but won't perform any flash or unlock commands (failed: remote command not allowed)
- have yet to get to recovery or erecovery
Is this trick in the button combos? I've tried them all repeatedly, is there a single instant I have to hit them/let them go?
Sorry for yet another help me thread, but I'm lost.
Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Sent from my Honor 8 using XDA Labs
ayush rao said:
Which model do u have?
Depending on which model u have u can try using this guide:
https://forum.xda-developers.com/honor-8/how-to/restoring-relocking-bricked-frd-l04-t3666360
Click to expand...
Click to collapse
Fr04. I'll give the guide a shot but I don't think I can flash anything via fastboot. I already said screw it and bought a moto so I'm in no hurry. Maybe this weekend. Thank you for the guidance .
Have tried the dload method? Flash full firmware via dload
The dload might work but idk if it will cus the phone is in a kernal panic it looks like. :crying:
---------- Post added at 06:52 AM ---------- Previous post was at 06:50 AM ----------
Did you have TWRP installed as your recovery?
I did but removed it while attempting to get back to stock.
dolorousbrann said:
I did but removed it while attempting to get back to stock.
Click to expand...
Click to collapse
You can reinstall
shashank1320 said:
You can reinstall
Click to expand...
Click to collapse
Given the description in my original post I don't know how to do that, sorry.
dolorousbrann said:
Given the description in my original post I don't know how to do that, sorry.
Click to expand...
Click to collapse
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware
shashank1320 said:
Download the full firmware for your model.
Extract the zip. Copy the contents (with update.app) to dload folder on sd card.
Power off the phone( it is already off i think)
Press vol up+ vol down+power key
It should start flashing the stock firmware
Click to expand...
Click to collapse
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks
dolorousbrann said:
Is done that a few times at never had it work. Either one got the wrong firmware (though it came straight from the Honor site) or in doing wondering wrong. I'll give it another go this weekend and try it back. Thanks
Click to expand...
Click to collapse
Good luck. Hope for the best
Not that anyone is still here but the dload method will not work. The phone won't leave the boot loop and go into recovery. Tried every button combo and timing I could to no avail. I have given up.
You should be able to remotely factory reset it through Google Find My Device
Try DC Unlocker I had this issue and it worked
Rommco05 said:
Which is your problem. You can boot to fastboot and PC recognize your phone?
Click to expand...
Click to collapse
I can boot into fastboot and it says "relocked". At Command Prompt "fastboot devices" shows the phone but any command (flash, update, oem unlock) all give me an error of "remote command not allowed".
Rommco05 said:
Try reinstall HiSuite and again connect phone to pC
Click to expand...
Click to collapse
HiSuite doesn't recognize that a device is connected.
Rommco05 said:
Try reinstall HiSuite, this will reinstall the drivers
Click to expand...
Click to collapse
Ok, ill try it tomorrow. Thank you.

Going back to stock rom.

Hello
I used RROS but the phone is heating up to 48 degree
I used to Lineages OS but the camera really bad
I used Carbon ROM. Not liked it.
I want to back stock rom again. But how?
Rommco05 said:
Which model?
Click to expand...
Click to collapse
bklal20
I did it. now using stock rom. thanks.
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
ozergul said:
bklal20
I did it. now using stock rom. thanks.
Click to expand...
Click to collapse
yashrathi9 said:
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
Click to expand...
Click to collapse
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
ozergul said:
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
Click to expand...
Click to collapse
its bricked now :/
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yashrathi9 said:
its bricked now :/
Click to expand...
Click to collapse
Bootloop? Flash kernel also and repeat these steps
Arrandale said:
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
Click to expand...
Click to collapse
Ramdisk and recovery_ramdisk
ozergul said:
Bootloop? Flash kernel also and repeat these steps
Click to expand...
Click to collapse
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
ozergul said:
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
Click to expand...
Click to collapse
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
yashrathi9 said:
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
Click to expand...
Click to collapse
What's the phone model you have?
Did you flash correct files i hope.
ozergul said:
What's the phone model you have?
Did you flash correct files i hope.
Click to expand...
Click to collapse
i have bkl-l09 c675 but no files were available for c675 so i tried flashing the global version ie bkl-l09 c432.
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
FreebleMined_FR said:
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
Click to expand...
Click to collapse
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
yashrathi9 said:
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
Click to expand...
Click to collapse
Try to use this method
https://forum.xda-developers.com/8-lite/how-to/guide-unbrick-huawei-p8-lite-2017-honor-t3766652
If your router does not allow you to do that, use DC-Phoenix or Funkyhuawei, but it's a last resort
I think you did something wrong. I used this method 2 times.

Ended Up while trying to downgrade to nougat

Hello Everyone, I was trying to downgrade my honor 6x to nougat via HW OTA method.. i have correctly entered every steps by the update via script method of hw ota .. But at the end when the pc shows done, and the update process should begin automatically,my phone reboots into recovery and shows the update package doesn't exist.. What should i do now.. I have unlocked bootloader... I was in b520 version of oreo..
Please Help
did you used hwota7 or 8?
I want to do the same downgrade for a problem with SIMs but now I'm worried to do it
Alex19Gam said:
did you used hwota7 or 8?
I want to do the same downgrade for a problem with SIMs but now I'm worried to do it
Click to expand...
Click to collapse
I have used hw ota 8
Hmm. Try reflashing the firmware. Maybe Dload
Mannan Qamar said:
Hmm. Try reflashing the firmware. Maybe Dload
Click to expand...
Click to collapse
I have used hu ru updater and flashed b520 ... I'm on oreo again...Btw thnq u for your response
Help, i tried the same thing downgrading to nougat from oreo (actually from pie pyxis), but I did direct using Hu Ru, and now I can't boot to eRecovery to do a factory reset, only the TWRP 3.2 elite boot and there I can't do Factory Reset (Format Data to dencrypt data), even the dload doesn't work, I tried flashing Boot, Recovery, System from fastboot (I have bootloader unlocked) and didn't work...
I tried all TWRP 3.1 and didn't boot, It reboot just starting recovery
What else can I do?
Alex19Gam said:
Help, i tried the same thing downgrading to nougat from oreo (actually from pie pyxis), but I did direct using Hu Ru, and now I can't boot to eRecovery to do a factory reset, only the TWRP 3.2 elite boot and there I can't do Factory Reset (Format Data to dencrypt data), even the dload doesn't work, I tried flashing Boot, Recovery, System from fastboot (I have bootloader unlocked) and didn't work...
I tried all TWRP 3.1 and didn't boot, It reboot just starting recovery
What else can I do?
Click to expand...
Click to collapse
Wipe the partition and try to reinstall using Hurupdater
Mannan Qamar said:
Wipe the partition and try to reinstall using Hurupdater
Click to expand...
Click to collapse
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and when I tried to Format Data:
@Jugabrat first why you want to downgrade and second have you flashed downgrade package as it is different from other normal builds?
Alex19Gam said:
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
and when I tried to Format Data:
Click to expand...
Click to collapse
In TWRP try to format data. If you get error try a different TWRP
---------- Post added at 07:12 PM ---------- Previous post was at 06:39 PM ----------
Alex19Gam said:
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
and when I tried to Format Data:
Click to expand...
Click to collapse
Try this. In TWRP go to wipe and then advance wipe and then individually select each partition and then Repair File System for each one one at a time. Then try to format data
mahrtayyab said:
@Jugabrat first why you want to downgrade and second have you flashed downgrade package as it is different from other normal builds?
Click to expand...
Click to collapse
In oreo there is no audio mod, Xposed, we cant load any magisk modules...Also full theme is not working... I have tried to downgrade using the downgrade firmware available in the firmware finder...
Mannan Qamar said:
In TWRP try to format data. If you get error try a different TWRP
---------- Post added at 07:12 PM ---------- Previous post was at 06:39 PM ----------
Try this. In TWRP go to wipe and then advance wipe and then individually select each partition and then Repair File System for each one one at a time. Then try to format data
Click to expand...
Click to collapse
It's worst now... I tried flashing a normal full stock firmware with HWOTA via SD, it looked like it flashed all files on log, but didn't work, can't booted and it locked the bootloader, it still can't boot on eRecovery.
So I unlocked bootloader to flash TWRP, but then it boot like trying to factory reset but stuck on first screen, and now I can't even boot on fastboot... So, no recovery, no fastboot, and no dload mode... It died?
Alex19Gam said:
It's worst now... I tried flashing a normal full stock firmware with HWOTA via SD, it looked like it flashed all files on log, but didn't work, can't booted and it locked the bootloader, it still can't boot on eRecovery.
So I unlocked bootloader to flash TWRP, but then it boot like trying to factory reset but stuck on first screen, and now I can't even boot on fastboot... So, no recovery, no fastboot, and no dload mode... It died?
Click to expand...
Click to collapse
Let the battery drain. Did it have TWRP? If not then I dunno know. Anyway let the battery drain and turn it on. When it shoes three options menu press and hold volume up. Luck
Mannan Qamar said:
Let the battery drain. Did it have TWRP? If not then I dunno know. Anyway let the battery drain and turn it on. When it shoes three options menu press and hold volume up. Luck
Click to expand...
Click to collapse
I don't think It keep TWRP, i can't boot nothing, I let the battery drain, when I turn on connecting to power, It keep trying to boot without let me choose an option, like I pressed Vol Up to boot in Recovery
Alex19Gam said:
I don't think It keep TWRP, i can't boot nothing, I let the battery drain, when I turn on connecting to power, It keep trying to boot without let me choose an option, like I pressed Vol Up to boot in Recovery
Click to expand...
Click to collapse
It's toast. Your best bet is to take it to a service center and pretend it happened like that after a update or try ant other. Best case scenario they will flash the software through Test Points and you'll be good to go. Worst case scenario you'll have to replace the mother board an it's like 40% of the phone cost
But what about mine ? I'm again on Oreo by hu ru updater...But i want to downgrade...so what alternative methods can i do to go back to nougat
Jugabrat said:
But what about mine ? I'm again on Oreo by hu ru updater...But i want to downgrade...so what alternative methods can i do to go back to nougat
Click to expand...
Click to collapse
Don't go back to Nougat. You'll brick your phone. But if you want to use HWOTA 8. And the Nougat files. Good Luck.
Another method is to see if roll back firmware is available for your device. Huawei usually release those. Try searching in Firmware Finder or try HiSuite to rollback
Yes , rollback files are available for my device but they are not verified to install..
If i use hw ota , should i flash a full firmware or the rollback package?
Jugabrat said:
Yes , rollback files are available for my device but they are not verified to install..
If i use hw ota , should i flash a full firmware or the rollback package?
Click to expand...
Click to collapse
With HWOTA always do the full firmware. What do you mean not verified? If Firmware Finder says that it's OK to install them. But yeah go with HWOTA 8 and Full OTA of Android 7
Mannan Qamar said:
With HWOTA always do the full firmware. What do you mean not verified? If Firmware Finder says that it's OK to install them. But yeah go with HWOTA 8 and Full OTA of Android 7
Click to expand...
Click to collapse
Files are not approved for installation...But available...
For HW OTA , should i download those rollback files or another Nougat full rom ?
And thnq u for quick response

Categories

Resources