my honor 6x isn't booting normally. i get in the eRecovery menu every time I boot.
Bootloader is unlocked
Twrp installed
I search for 2 hours now but I can't find the stock firmware of the honor 6x
I think if you use the options in the eRecovery, you should be able to restore it to factory settings. But, I have not used this function, so I could be wrong.
However, even with twrp installed I am unable to use a buttom combination to boot into it. The only method that works for me is rebooting into it with a reboot app (root) or via adb reboot.
When I use the volume up + power button combi it boots into the eRecovery instead of twrp.
Mvs1989 said:
I think if you use the options in the eRecovery, you should be able to restore it to factory settings. But, I have not used this function, so I could be wrong.
However, even with twrp installed I am unable to use a buttom combination to boot into it. The only method that works for me is rebooting into it with a reboot app (root) or via adb reboot.
When I use the volume up + power button combi it boots into the eRecovery instead of twrp.
Click to expand...
Click to collapse
i get an error when i try to download and recover on eRecovery
h4rd1337 said:
i get an error when i try to download and recover on eRecovery
Click to expand...
Click to collapse
give another try..
flash twrp again and reboot system
once done., now use a command to go to recovery
thilak devraj said:
give another try..
flash twrp again and reboot system
once done., now use a command to go to recovery
Click to expand...
Click to collapse
I can go to twrp but my system doesnt boot up
I get the message 'your device has Been unlocked and cant be trusted'. I wait 5 seconds and it i See the honor Logo for a second and then i get the message again and then i redirects me to 'huawei eRecovery'
When i press 'download and recovery' it connects to wifi and says 'getting package info Form Server' after a second i get an error and it says 'getting package info failed'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When i press 'cancel' and then 'reboot' it does it again
h4rd1337 said:
I can go to twrp but my system doesnt boot up
I get the message 'your device has Been unlocked and cant be trusted'. I wait 5 seconds and it i See the honor Logo for a second and then i get the message again and then i redirects me to 'huawei eRecovery'
When i press 'download and recovery' it connects to wifi and says 'getting package info Form Server' after a second i get an error and it says 'getting package info failed'
When i press 'cancel' and then 'reboot' it does it again
Click to expand...
Click to collapse
reboot to booloader and flash twrp again
thilak devraj said:
reboot to booloader and flash twrp again
Click to expand...
Click to collapse
twrp works now
h4rd1337 said:
twrp works now
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
and what now?
h4rd1337 said:
and what now?
Click to expand...
Click to collapse
go on and flash a custom rom..
thilak devraj said:
go on and flash a custom rom..
Click to expand...
Click to collapse
the problem is that i cannot find a custom rom for the honor 6x
h4rd1337 said:
the problem is that i cannot find a custom rom for the honor 6x
Click to expand...
Click to collapse
uh, oh , my bad..
Sounds like only way is to use fastboot to reflash factory images.
There are no custom roms yet. When you get the unlocked warning, just press the power button again, as it should state in the message. Then it should boot normally, i think/hope.
h4rd1337 said:
the problem is that i cannot find a custom rom for the honor 6x
Click to expand...
Click to collapse
Not really a problem as there are no custom roms yet
Dealing with similar issue with my L24 I had everything working great. Debloating the rom and edited build.prop.. but then I got update to su binary and rebooted. Then edited build.prop again and that was the end of her haha.
Now, in TWRP, it will not mount anything. Get error 8 and error 1? Tried the format data option under wipe, can't mount. Tried wiping data, can't mount. Tried cat /etc/fstab and data was different than other partitions. dev/block/dm-0 while all others were something like mmblk041... Any ideas?
Maybe the rm -rf option? I've ran out of things to google haha.
tre717 said:
Dealing with similar issue with my L24 I had everything working great. Debloating the rom and edited build.prop.. but then I got update to su binary and rebooted. Then edited build.prop again and that was the end of her haha.
Now, in TWRP, it will not mount anything. Get error 8 and error 1? Tried the format data option under wipe, can't mount. Tried wiping data, can't mount. Tried cat /etc/fstab and data was different than other partitions. dev/block/dm-0 while all others were something like mmblk041... Any ideas?
Maybe the rm -rf option? I've ran out of things to google haha.
Click to expand...
Click to collapse
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
thilak devraj said:
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
Click to expand...
Click to collapse
Ahhh didn't think about that... Will try when I get to work... Better internet there haha.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
Have anyone seen this.. I have no idea how I did it lol. Some how the build. prop was changed??
My 6x is now a "Berlin" when connected ??
tre717 said:
Ahhh didn't think about that... Will try when I get to work... Better internet there haha.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
Have anyone seen this.. I have no idea how I did it lol. Some how the build. prop was changed??
My 6x is now a "Berlin" when connected
Click to expand...
Click to collapse
lol.. :laugh::laugh:
thilak devraj said:
may be you can do this>
download any full firmware for your device model.. extract using some software(you can google for update.app extractor) and if there is any recovery.img, coppy that and paste it inside sd card.. now boot to twrp and select install and select image from below and browse to recovery.img then flash it
now you should be with emui recovery.. now make a dload floder and place update.app inside it and power off and do vol+,vol_ and power at atime and leave once hnor logo appears.. you should be updated.. (I DONT KNOW IF IT WORKS... TRY AT YOU OWN RISK)
Click to expand...
Click to collapse
Downloaded the B170 firmware. And unpacked the update file. Fastboot flash boot system cache and recovery images..
So far so good!! There are some differences in the apps and added features? Has a step counter. I dont remember seeing a step counter in my orignal firmware.
Sent from my HUAWEI hi6250 using XDA Labs
Related
So I was trying to flash this roll back package to MM on my honor 8 FRD-L19
And boom I was stuck in a boot loop , no battery charging
No dload method working , nor the recovery.
So here's the deal
Frp- locked
Bootloader- locked
I can only get to the fastboot and rescue mode but then I can't flash anything , not even oem unlock
Every command execution gives an error : Failed ( remote command not allowed)
Please somebody help !
No, just the roll back ! After that I was at the bootloop and couldn't do anything about it.
Rommco05 said:
U flash both rollback mad Marshmallow, right? Both was successful done?
Click to expand...
Click to collapse
Rommco05 said:
Put to dload full firmware of Marshmallow from official site, or u try already?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
U use right rollback packages, it seems like no
Click to expand...
Click to collapse
The dload isn't happening, I'm not sure what went wrong. I can't access dload , only fastboot and rescue mode and then can't flash anything. Shows an error Failed ( remote command not allowed)
How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.
Rommco05 said:
I can unlock bootloader via fastboot, hopefully will unlocked frp too after flash twrp
Click to expand...
Click to collapse
After rollback of small update.app the frp and phone is locked ,we can again unlock it , i did it just a hour ago.
FRD-L09 bootloop after downgrade to B131
Hey folks!
I have similar problem with my FRD-L09. I succesfully downgraded to MM via the 73mb rollback package and the B131 ROM. The phone worked prerfectly. After that I plugged the phone to the charger. When i wanted to grab it noticed the phone keeps restarting and stucked in bootloop. I cant even turn it off
I tryed to get in the recovery menu with the volume up+pwr button combo, but it doesnt work, the phone restarts and shows the boot logo again. If i try to restart and go into the update menu with the 3 buttons method the screen goes black, after a several minutes the phone reboots...
Do you have any idea how can i fix my phone?
Thanks in advance,
Mark
venugopalu007 said:
How much is the rollback package if it was about 77 mb ,
It locks the phone, you have to flash the another firmware (offical one).
Dload to it .
Make sure ur phone is power off and do 3 button trick. Not worked then follow below
If there is no charge then make sure your phone is power odf and hold the both volumes and connect the usb cable to pc and it will update.
Click to expand...
Click to collapse
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then
Rommco05 said:
When phone start rebooting hold vol up, if u boot to recovery make factory reset
Click to expand...
Click to collapse
Yep, i tried that. I cant get into the recovery. As i wrote, it didnt work because of the phone rings and restarts itself.
Quick question: where can I get the official Honor 8 FRD-L04 firmware (USA version)? I have a phone I'm trying to put stock MM firmware on, I'm able to get into fastboot mode. I just want the firmware that is suitable for that phone version. I need a flashing method that will give me zero errors, as in if I flash something like "SYSTEM.img" I won't get uploading errors.
Status:
Bootloader: locked
FRP: unlocked
Rommco05 said:
You can find it in development section and thread is named all stock firmwares or something like that, here is the for you. Is good frp unlocked
Click to expand...
Click to collapse
Ok, but I need a guide that actually works. I have the official firmware, I just need to flash it with no problems. I've tried many tutorials from youtube but none of them have worked. The "Vol - Vol + Power" button method doesn't work for me. I have also tried Huawei Multi-tool and all I get by using the unbrick function is "FAILED(partition error, or sparse write failure). I can go into erecovery mode, but everytime I try to restore it says "getting package info failed".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
amansaini said:
Yes it was about 77 mb
I'm trying to flash one via dload but it's not happening
I'm gonna try the further and I shall let you know what happens then
Click to expand...
Click to collapse
Then after do a big dload of official firmware , your phone will be unbricked.
Rommco05 said:
Ok, your last firmware was Nougat and you have successfully installed rollback packages?
Click to expand...
Click to collapse
I haven't been able to install any kind of stock firmware, that's the issue. From the image I uploaded I'm having trouble flashing the 2 stock files "CUST.img" and "SYSTEM.img". They simply don't go through.
Rommco05 said:
You have FRP unlocked what is really good. U can unlock bootloader and flash twrp after via twrp install firmware, what u think about this?
Click to expand...
Click to collapse
That's good, and I just installed TWRP. Is there a .zip file to be able to flash the official firmware? I have Update.app but its not in .zip, can I rename the extension and try flashing as update.zip?
Rommco05 said:
Which twrp excatly u have installed, is a important. No u cant I send u zip but need to know twrp version
Click to expand...
Click to collapse
TWRP 3.1.1
venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
sir , its not happening , Dload is not working , i am also trying two buttons while attaching to usb, still nothing ,again it got to the honor screen and stuck in bootloop and then restart.
when i dload , it just shows the red charge bolt sign and then the led flashes 4-5 times and then off
Rommco05 said:
Ok, last question. Your model is FRD-L04C567, right? If yes download this two zips :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72309/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...09/f1/full/hw/usa/update_data_full_hw_usa.zip
Flash first region zip and after update zip. After instalation go to reboot and make reboot recovery. Now u will be in stock recovery and tap factory reset, after reboot, probably now you boot to rom
Click to expand...
Click to collapse
Thank you so much for this guide and for providing the files to flash the stock ROM. It worked! Can I relock the bootloader after as well? To get rid of that message saying "this phone can't be trusted".
venugopalu007 said:
Then after do a big dload of official firmware , your phone will be unbricked.
Click to expand...
Click to collapse
Rommco05 said:
Youre welcome, no problem yes sure you now can relock >> fastboot eom relock yourunlockcode
---------- Post added at 08:11 ---------- Previous post was at 08:09 ----------
Leave him fully discharged if this dont help I think u need to go service. How this happened? You can use your warranty?
Click to expand...
Click to collapse
i can't go to the Customer care since i'm in India and only USA cc can attend to it.
I'm trying after fully discharge too. the most i get is a green charging circle which says 6% and then it reboots or i think try to boot further automatically then it goes to boot loop again and we are at square one
One last question: after the stock 7.0 installation, I wanted to install the B385 update of EMUI 5.0, I tried the automatic method but the message I get is "Failed to check update package". Is there a solution towards this that can enable this update to install?
Rommco05 said:
Can u post screenshots which exactly u want install? Basically if u want manually install some firmware must be labelled with -PV on end name of firmware
Click to expand...
Click to collapse
Rommco05 said:
Try this one which I select
Click to expand...
Click to collapse
Where can I get the firmware? And the installation method? I don't have Firmware Finder.
Hello
I used RROS but the phone is heating up to 48 degree
I used to Lineages OS but the camera really bad
I used Carbon ROM. Not liked it.
I want to back stock rom again. But how?
Rommco05 said:
Which model?
Click to expand...
Click to collapse
bklal20
I did it. now using stock rom. thanks.
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
ozergul said:
bklal20
I did it. now using stock rom. thanks.
Click to expand...
Click to collapse
yashrathi9 said:
I am using cosmic rom and i want to go back to the stock rom now. I have tried the dload card method but it didn't work. Then i tried the twrp method and recovery is stuck on the logo. I flashed the official recovery but its not able to flash the update. Zip files on internal or sd card. Can you help me with it. My model number is bkl-l09 c675
Click to expand...
Click to collapse
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
ozergul said:
Download update.zip from firmware finder
Rename it update.app
Extract it with Huawei extract tool
Get these files: System recovery recovery_ramdisk
Fastboot flash recovery recovery.img
Fastboot flash recovery_ramdisk recovery_ramdisk.img
Fastboot flash system system.img
Click to expand...
Click to collapse
its bricked now :/
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yashrathi9 said:
its bricked now :/
Click to expand...
Click to collapse
Bootloop? Flash kernel also and repeat these steps
Arrandale said:
Hey, i have a similar Problem. I am currently on the Berkeley Lineage 15.1 build and would like to go back to stock.
I can't find recovery.img in my file, or should i use a different one?
Click to expand...
Click to collapse
Ramdisk and recovery_ramdisk
ozergul said:
Bootloop? Flash kernel also and repeat these steps
Click to expand...
Click to collapse
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
ozergul said:
Close phone and unplug usb cable
Hold down volume-
And plug usb cable
Try again to get into fastboot
If cant get, there is one more solution
Click to expand...
Click to collapse
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
yashrathi9 said:
i flashed the kernel , ramdisk , recovery_ramdisk and system.img but its still stuck on bootloop and the unlocked message is not going away. any other option left?
Click to expand...
Click to collapse
What's the phone model you have?
Did you flash correct files i hope.
ozergul said:
What's the phone model you have?
Did you flash correct files i hope.
Click to expand...
Click to collapse
i have bkl-l09 c675 but no files were available for c675 so i tried flashing the global version ie bkl-l09 c432.
yashrathi9 said:
mate i cant even get into fastboot now. sorry for bothering you but is there any solution now?
Click to expand...
Click to collapse
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
FreebleMined_FR said:
What is the current state?
Twrp or emui recovery ?
Does erecovery work ?
Can you see the fastboot screen and you cannot flash or you cannot access it at all?
Click to expand...
Click to collapse
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
yashrathi9 said:
Its on bootloop. i cant enter the twrp or emui recovery. erecovery works and fastboot is working. i tired flash the image files several time but no luck.
Click to expand...
Click to collapse
Try to use this method
https://forum.xda-developers.com/8-lite/how-to/guide-unbrick-huawei-p8-lite-2017-honor-t3766652
If your router does not allow you to do that, use DC-Phoenix or Funkyhuawei, but it's a last resort
I think you did something wrong. I used this method 2 times.
Hello Everyone, I was trying to downgrade my honor 6x to nougat via HW OTA method.. i have correctly entered every steps by the update via script method of hw ota .. But at the end when the pc shows done, and the update process should begin automatically,my phone reboots into recovery and shows the update package doesn't exist.. What should i do now.. I have unlocked bootloader... I was in b520 version of oreo..
Please Help
did you used hwota7 or 8?
I want to do the same downgrade for a problem with SIMs but now I'm worried to do it
Alex19Gam said:
did you used hwota7 or 8?
I want to do the same downgrade for a problem with SIMs but now I'm worried to do it
Click to expand...
Click to collapse
I have used hw ota 8
Hmm. Try reflashing the firmware. Maybe Dload
Mannan Qamar said:
Hmm. Try reflashing the firmware. Maybe Dload
Click to expand...
Click to collapse
I have used hu ru updater and flashed b520 ... I'm on oreo again...Btw thnq u for your response
Help, i tried the same thing downgrading to nougat from oreo (actually from pie pyxis), but I did direct using Hu Ru, and now I can't boot to eRecovery to do a factory reset, only the TWRP 3.2 elite boot and there I can't do Factory Reset (Format Data to dencrypt data), even the dload doesn't work, I tried flashing Boot, Recovery, System from fastboot (I have bootloader unlocked) and didn't work...
I tried all TWRP 3.1 and didn't boot, It reboot just starting recovery
What else can I do?
Alex19Gam said:
Help, i tried the same thing downgrading to nougat from oreo (actually from pie pyxis), but I did direct using Hu Ru, and now I can't boot to eRecovery to do a factory reset, only the TWRP 3.2 elite boot and there I can't do Factory Reset (Format Data to dencrypt data), even the dload doesn't work, I tried flashing Boot, Recovery, System from fastboot (I have bootloader unlocked) and didn't work...
I tried all TWRP 3.1 and didn't boot, It reboot just starting recovery
What else can I do?
Click to expand...
Click to collapse
Wipe the partition and try to reinstall using Hurupdater
Mannan Qamar said:
Wipe the partition and try to reinstall using Hurupdater
Click to expand...
Click to collapse
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and when I tried to Format Data:
@Jugabrat first why you want to downgrade and second have you flashed downgrade package as it is different from other normal builds?
Alex19Gam said:
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
and when I tried to Format Data:
Click to expand...
Click to collapse
In TWRP try to format data. If you get error try a different TWRP
---------- Post added at 07:12 PM ---------- Previous post was at 06:39 PM ----------
Alex19Gam said:
Did you mean over TWRP or fastboot? I tried at TWRP wiping all except Data, but It stuck when I press Vol -
I think it is for the Data encryption, I can't remove it with that TWRP version and I can't use another version
Edit: I tried formating data via fastboot but I always get FAILED (remote: Command not allowed) with "fastboot format" and "fastboot erase"
HuRu stuck (after pressing VOL DOWN it keep loading forever):
and when I tried to Format Data:
Click to expand...
Click to collapse
Try this. In TWRP go to wipe and then advance wipe and then individually select each partition and then Repair File System for each one one at a time. Then try to format data
mahrtayyab said:
@Jugabrat first why you want to downgrade and second have you flashed downgrade package as it is different from other normal builds?
Click to expand...
Click to collapse
In oreo there is no audio mod, Xposed, we cant load any magisk modules...Also full theme is not working... I have tried to downgrade using the downgrade firmware available in the firmware finder...
Mannan Qamar said:
In TWRP try to format data. If you get error try a different TWRP
---------- Post added at 07:12 PM ---------- Previous post was at 06:39 PM ----------
Try this. In TWRP go to wipe and then advance wipe and then individually select each partition and then Repair File System for each one one at a time. Then try to format data
Click to expand...
Click to collapse
It's worst now... I tried flashing a normal full stock firmware with HWOTA via SD, it looked like it flashed all files on log, but didn't work, can't booted and it locked the bootloader, it still can't boot on eRecovery.
So I unlocked bootloader to flash TWRP, but then it boot like trying to factory reset but stuck on first screen, and now I can't even boot on fastboot... So, no recovery, no fastboot, and no dload mode... It died?
Alex19Gam said:
It's worst now... I tried flashing a normal full stock firmware with HWOTA via SD, it looked like it flashed all files on log, but didn't work, can't booted and it locked the bootloader, it still can't boot on eRecovery.
So I unlocked bootloader to flash TWRP, but then it boot like trying to factory reset but stuck on first screen, and now I can't even boot on fastboot... So, no recovery, no fastboot, and no dload mode... It died?
Click to expand...
Click to collapse
Let the battery drain. Did it have TWRP? If not then I dunno know. Anyway let the battery drain and turn it on. When it shoes three options menu press and hold volume up. Luck
Mannan Qamar said:
Let the battery drain. Did it have TWRP? If not then I dunno know. Anyway let the battery drain and turn it on. When it shoes three options menu press and hold volume up. Luck
Click to expand...
Click to collapse
I don't think It keep TWRP, i can't boot nothing, I let the battery drain, when I turn on connecting to power, It keep trying to boot without let me choose an option, like I pressed Vol Up to boot in Recovery
Alex19Gam said:
I don't think It keep TWRP, i can't boot nothing, I let the battery drain, when I turn on connecting to power, It keep trying to boot without let me choose an option, like I pressed Vol Up to boot in Recovery
Click to expand...
Click to collapse
It's toast. Your best bet is to take it to a service center and pretend it happened like that after a update or try ant other. Best case scenario they will flash the software through Test Points and you'll be good to go. Worst case scenario you'll have to replace the mother board an it's like 40% of the phone cost
But what about mine ? I'm again on Oreo by hu ru updater...But i want to downgrade...so what alternative methods can i do to go back to nougat
Jugabrat said:
But what about mine ? I'm again on Oreo by hu ru updater...But i want to downgrade...so what alternative methods can i do to go back to nougat
Click to expand...
Click to collapse
Don't go back to Nougat. You'll brick your phone. But if you want to use HWOTA 8. And the Nougat files. Good Luck.
Another method is to see if roll back firmware is available for your device. Huawei usually release those. Try searching in Firmware Finder or try HiSuite to rollback
Yes , rollback files are available for my device but they are not verified to install..
If i use hw ota , should i flash a full firmware or the rollback package?
Jugabrat said:
Yes , rollback files are available for my device but they are not verified to install..
If i use hw ota , should i flash a full firmware or the rollback package?
Click to expand...
Click to collapse
With HWOTA always do the full firmware. What do you mean not verified? If Firmware Finder says that it's OK to install them. But yeah go with HWOTA 8 and Full OTA of Android 7
Mannan Qamar said:
With HWOTA always do the full firmware. What do you mean not verified? If Firmware Finder says that it's OK to install them. But yeah go with HWOTA 8 and Full OTA of Android 7
Click to expand...
Click to collapse
Files are not approved for installation...But available...
For HW OTA , should i download those rollback files or another Nougat full rom ?
And thnq u for quick response
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im not a developer of this, i just shared it here
Downloads & Device trees
View
<Moderator Edit>
Thread closed!
Custom rom for realme 2 pro
Realme 2 pro ke liye custom roms kabse available honge..plz tell mee... I'm so excited...plz make pixel experience and Oxygen os..
Thanks for share mate. Keep the good work up
Im not a developer of this, i just shared it here
Click to expand...
Click to collapse
But After seeing your github site it seems you are a developer. So you can work on it after your exams and if possible edit OP and add TWRP template .
On the TWRP page it says-
"Power off device.
Pick up your phone and press power button and volume up key at same time. It will boot into TWRP.
Format Data.
Flash Magisk and Data decryption patch and reboot your device.
Done"
My question is - can i just flash TWRP and then flash Magisk to get root without wiping data?
i unlocked the bootloader few days back and did complete setup of my phone 2nd time, so i dont want to format again... and go through the whole process.
Any help is appreciated.
mustali said:
On the TWRP page it says-
"Power off device.
Pick up your phone and press power button and volume up key at same time. It will boot into TWRP.
Format Data.
Flash Magisk and Data decryption patch and reboot your device.
Done"
My question is - can i just flash TWRP and then flash Magisk to get root without wiping data?
i unlocked the bootloader few days back and did complete setup of my phone 2nd time, so i dont want to format again... and go through the whole process.
Any help is appreciated.
Click to expand...
Click to collapse
You can, but twrp will encrypted and you can't see internal memory on twrp
alien0234 said:
You can, but twrp will encrypted and you can't see internal memory on twrp
Click to expand...
Click to collapse
Thanks for prompt reply.
So if i cant access internal memory i wont be able to flash magisk zip from recovery, right ?
is there any work around for this issue?
mustali said:
Thanks for prompt reply.
So if i cant access internal memory i wont be able to flash magisk zip from recovery, right ?
is there any work around for this issue?
Click to expand...
Click to collapse
Use external
alien0234 said:
Use external
Click to expand...
Click to collapse
I did the exact same method as mentioned in this thread, but twrp isn't reading the microSD slot. It gives 0 MB as size of microSD and I can't select it. Also, it seems to me that twrp starts from the beginning everytime I boot to recovery as I'm getting the 'Allow modifications to system partion' in every boot. Can someone please help?
My microSD is FAT32 format, and its contents aren't encrypted. I'm able to read the contents of it in PC and in my phone, but not in recovery.
mustali said:
On the TWRP page it says-
"Power off device.
Pick up your phone and press power button and volume up key at same time. It will boot into TWRP.
Format Data.
Flash Magisk and Data decryption patch and reboot your device.
Done"
My question is - can i just flash TWRP and then flash Magisk to get root without wiping data?
i unlocked the bootloader few days back and did complete setup of my phone 2nd time, so i dont want to format again... and go through the whole process.
Any help is appreciated.
Click to expand...
Click to collapse
Pls help am unable to follow the procedure for flashing recovery as there are so many tuts
is it possible to flash twrp and take back up of system when its not rooted?
ashwinkabbinahalli said:
Pls help am unable to follow the procedure for flashing recovery as there are so many tuts
is it possible to flash twrp and take back up of system when its not rooted?
Click to expand...
Click to collapse
Yes, you can flash twrp and take whole system backup without root. You need to unlock bootloader for flashing recovery if you haven't unlocked yet.
Procedure is simple.
1 setup adb and fastboot drivers in your pc.
2. power off your device and hold volume down and power button simultaneously to boot device in fastboot mode.
3. Press shift+right click and select open command window here in a folder where you saved twrp.img
4. Type "fastboot devices" without quotes and enter.
5. type "fastboot flash recovery recovery.img" and press enter then recovery gets flashed.
5. Type "fastboot reboot recovery" to boot into recovery mode.
Stock rom and stock recovery
Please how we return stock recovery or stock rom. Please help us...
---------- Post added at 06:47 AM ---------- Previous post was at 06:00 AM ----------
where i am find stock recovery
Edebre said:
Please how we return stock recovery or stock rom. Please help us...
---------- Post added at 06:47 AM ---------- Previous post was at 06:00 AM ----------
where i am find stock recovery
Click to expand...
Click to collapse
I followed this step:
Download latest firmware of realme from here
https://www.realme.com/in/support/software-update
I downloaded stock recovery here
https://androidfilehost.com/?fid=11410963190603903159
Then flashed this recovery from adb, then boot to recovery, find the firmware on ur sd card and then flash it.
Can we enable camera2api on device yet?
dr0hith said:
I did the exact same method as mentioned in this thread, but twrp isn't reading the microSD slot. It gives 0 MB as size of microSD and I can't select it. Also, it seems to me that twrp starts from the beginning everytime I boot to recovery as I'm getting the 'Allow modifications to system partion' in every boot. Can someone please help?
My microSD is FAT32 format, and its contents aren't encrypted. I'm able to read the contents of it in PC and in my phone, but not in recovery.
Click to expand...
Click to collapse
i am also facing similar problem. pls help. tq.
ThePain005 said:
Im not a developer of this, i just shared it here
Downloads & Device trees
View
Click to expand...
Click to collapse
is that void guarantee?
does this support rmx1807 8/128GB variant?
Hello,
My OnePlus is stuck in a bootloop. I can turn it off but if I turn it on, it displays the first screen with the logo "+1" then the second screen with the circles that turn and there they freeze. The circles do not move any more then it restarts and it starts again until the battery runs out.
I tried this awesome tuto called "How to unroot OnePlus 6 in bootloop / hard-brick" but i'm stuck in thé step 5. The phone restarts, I first screen "1+" then the screen with the H2OS logo and then it remains frozen on the logo and the phone restarts and so on. I have tried to retake everything from step 1 but I am still stuck in step 5.
Do you have any idea ?
Thanks,
Don't know that tutorial, but i think it's only a softbrick, have you tried to format data from recovery? Stock one or TWRP doesn't matter, and what you was doing before the phone goes bricked?
Hi !
Sorry I can't post URL of this tuto because i'm new here and there is a restriction. It's this one :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before this bug I was just playing with a stupid filter in Snapchat then white screen and bootloop.
I've already tried the followings things (without success) :
Wipe data and cache
- reset system setting
- wipe cache => aucun effet
- erase everything (music, pics, etc)
Advanced
- Reboot to fastboot
- Reboot to recovery
I'm lost...
Oli78 said:
Hi !
Sorry I can't post URL of this tuto because i'm new here and there is a restriction. It's this one :
Before this bug I was just playing with a stupid filter in Snapchat then white screen and bootloop.
I've already tried the followings things (without success) :
Wipe data and cache
- reset system setting
- wipe cache => aucun effet
- erase everything (music, pics, etc)
Advanced
- Reboot to fastboot
- Reboot to recovery
I'm lost...
Click to expand...
Click to collapse
Are you encrypted/decrypted twrp/root unlocked bootloader? One or all of them? Tell me more
Sent from my OnePlus7T using XDA Labs
have u try to flash the stock oxygenos firmware zip ? u can use both stock and twrp recovery. what's ur bootloader state ? locked or unlocked ?
Hitman478™ said:
Are you encrypted/decrypted twrp/root unlocked bootloader? One or all of them? Tell me more
Sent from my OnePlus7T using XDA Labs
Click to expand...
Click to collapse
I'm sorry I don't know what is "TWRP". But i saw there is wrote : "bootlocker : device state locked". Is it helpful for you ?
Azhar_Fahry said:
have u try to flash the stock oxygenos firmware zip ? u can use both stock and twrp recovery. what's ur bootloader state ? locked or unlocked ?
Click to expand...
Click to collapse
I just follow this tutorial https://www.youtube.com/watch?v=yKfT7UsWQAk and i'm stuck in the step 5 like you can see here https://www.youtube.com/watch?v=4gMUUZ2CVDM
My bootloader state is locked.
You need to try a format from stock recovery but you'll lose your data
Hitman478™ said:
You need to try a format from stock recovery but you'll lose your data
Click to expand...
Click to collapse
Luckily I made a backup a week before so it's not a problem to lose my data. How can I format from stock recovery ?
Is there a tutorial?
I tried to unlock my bootloader.
Download & Update OnePlus 6 Drivers => ok
Download & Update Fastboot and ADB Binaries/Drivers => ok
Open a command prompt window
fastboot devices => ok
fastboot oem unlock => flashing unlock is not allowed
Try the MSM unbrick tool, i don't think you can unlock the bootloader in this state since you didn't enable it in the dev options
Oli78 said:
Hello,
My OnePlus is stuck in a bootloop. I can turn it off but if I turn it on, it displays the first screen with the logo "+1" then the second screen with the circles that turn and there they freeze. The circles do not move any more then it restarts and it starts again until the battery runs out.
Thanks,
Click to expand...
Click to collapse
With the phone turned off. Hold the volume down button and then push the power button for 10-15 seconds and see if phone reboots to recovery or fastboot. If you can get the phone boot to fastboot, follow the simple guide at the link below. Be patient and follow the steps. This process will erase all the data but you said you already have a copy of the back up data. Download on your PC/laptop the correct version, most current stable OS is 9.0.9. Download will be in the zip format. Unzip the file. While phone in the fastboot mode, connect to your PC. In the unzipped folder, click on FlashAll.bat file and wait. You may get some failure messages, just igore them. Eventually the phone will reboot as a brand new phone. Here is the link:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Goodluck.
Chinaroad said:
Try the MSM unbrick tool, i don't think you can unlock the bootloader in this state since you didn't enable it in the dev options
Click to expand...
Click to collapse
I already try this solution but i'm still in bootloop.
Gr8man001 said:
With the phone turned off. Hold the volume down button and then push the power button for 10-15 seconds and see if phone reboots to recovery or fastboot. If you can get the phone boot to fastboot, follow the simple guide at the link below. Be patient and follow the steps. This process will erase all the data but you said you already have a copy of the back up data. Download on your PC/laptop the correct version, most current stable OS is 9.0.9. Download will be in the zip format. Unzip the file. While phone in the fastboot mode, connect to your PC. In the unzipped folder, click on FlashAll.bat file and wait. You may get some failure messages, just igore them. Eventually the phone will reboot as a brand new phone. Here is the link:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Goodluck.
Click to expand...
Click to collapse
Thanks, I try that but there is a failure message "FAILED (remote: Flashing is not allowed in Lock State)" and the phone dit not reboot.
Turn off the phone.. Den press both volume up and power button for few sec.. It will boot into Fastboot.. Now connect to pc and then use Fastboot command to unlock your bootloader. Then use msmtool to install fresh stock rom.
HatRiGt said:
Turn off the phone.. Den press both volume up and power button for few sec.. It will boot into Fastboot.. Now connect to pc and then use Fastboot command to unlock your bootloader. Then use msmtool to install fresh stock rom.
Click to expand...
Click to collapse
I already did that and with this command (fastboot oem unlock) I get this error : flashing unlock is not allowed.
I guess I've to unlock my bootloader first but I don't know how to do that in hardbrick...
I am assuming that you have appropriate ONEplus driver installed?
---------- Post added at 05:40 PM ---------- Previous post was at 05:37 PM ----------
Also are you using the command mentioned in my previous email from the downloaded zipped file. don't try to unlock. Simply try flashall.bat file in the fastboot mode.
Oli78 said:
Luckily I made a backup a week before so it's not a problem to lose my data. How can I format from stock recovery ?
Is there a tutorial?
Click to expand...
Click to collapse
boot into ur recovery, wipe data and flash this firmware. https://forum.xda-developers.com/oneplus-6/how-to/official-oxygenos-5-1-5-ota-oneplus-6-t3794232 . i hope it works.
try this
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
Gr8man001 said:
I am assuming that you have appropriate ONEplus driver installed?
---------- Post added at 05:40 PM ---------- Previous post was at 05:37 PM ----------
Also are you using the command mentioned in my previous email from the downloaded zipped file. don't try to unlock. Simply try flashall.bat file in the fastboot mode.
Click to expand...
Click to collapse
Yes, i dit that :
reboot the phone in fastboot mode
download the OS 9.0.9
connect the phone to the PC (in USB)
in the previous zip folder, click on flash-all.bat
and see the capture below...