Related
I made the fatal mistake of upgrading to Nougat. ( NXT-L29C432502 # 16 on the OP list)
All looked great until I started to see the negative side of this Beta Nougat.
After much time of trying various fixes. I'm at a point that when Nougat loads for the initial launch.
Setting Language ,Enhanced Wifi,declining finger lock.
The software boot loops to the Language selection page.
No setting mode or dialer that will allow me to dload or enter USB Debugging.
I can dload by using my SD card which works using the power and volume buttons but does not install a full system
that will boot.
SK tools kit and ADB will not fully detect my device because of the USB Debugging not being turned on.
If I could get Debugging turned on I feel that I could resolve my disaster.
I hope I don't have to wait until March to get the "Full" Nougat update.
I'm embarrassed to admit how many days I've screwed with this device.
With srk tool you don't need usb debugging,you can use fastboot mode instead. You can flash recovery if needed.
Anyway try to downgrade using the rollback packages .
gm007 said:
With srk tool you don't need usb debugging,you can use fastboot mode instead. You can flash recovery if needed.
Anyway try to downgrade using the rollback packages .
Click to expand...
Click to collapse
I keep getting on the adb screen device null or can't find device.
Hisute can't find the device also.
No debugging. No ADB or device detection. I've done the Windows drivers and device manager USB updates.
I wish I still drank damn it.
I used DC-Unlocker and paid 15 euros and did an "FRP" wipe.
Now I'm back to an operating device on Nougat .
May attempt downgrade later I really need a "Bluetooth" working device.
kdkinc said:
I used DC-Unlocker and paid 15 euros and did an "FRP" wipe.
Now I'm back to an operating device on Nougat .
May attempt downgrade later I really need a "Bluetooth" working device.
Click to expand...
Click to collapse
With dc-unlocker you can unlock frp lock?
Hi,
I have the honor 8 FRD-Al00 (chinese) only 2 days .
The phone ask to update the emui, and i did but now the phone is stock in erecovery mode when ask to download the latest version and recovery via wifi but fail every time.
I try to reset to fabric settings but don´t work.
i don´t know what happen and i don´t know what to do anymore.
Please anyone can help me?
Thanks
Rommco05 said:
Where you buy phone? You have warranty?
Click to expand...
Click to collapse
is a gift, but i know is from gearbest but if i can resolve the problem here is better than send the phone to chine and all the process.
Rommco05 said:
hm another bad situation. For your model isn't (or I don't know where) full firmware which can be useful. Try this, install HiSuite to PC and here is one section to repair phone, follow instruction in this program.
edit: try reset your wifi setting, setup for short without possword and try again download via eRecovery latest version
Click to expand...
Click to collapse
i have try the two methods but don´t work. via wifi fails everytime. via hisuite the recovey said the phone is not supported
Rommco05 said:
Fastboot recognized phone? If yes which Android you have last one? You can try unlock bootloader and flash custom recovery TWRP and after custom rom, thats maybe can help but warranty will be gone after amd I really don't know what happened after unlocking bootloader
Click to expand...
Click to collapse
you want to know if i can enter in menu fastboot? power and volume down key? yes and said Phone locked Frp lock. the android in the begin are 7.0 but after this happen i try to reset to fabric so now i don´t know.
Rommco05 said:
FRP lock and in HiSuite isn't option rollback?
edit: check this http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
in hisuite the only option is system recovery but the phone is not supported
Rommco05 said:
Sorry man I think you must use warranty or some other member have more info like me
Click to expand...
Click to collapse
Thanks for try to help me.
If anyone else knows how to help me please let me know.
And i continue to investigate and if i know a solution i post here for others with the same problem.
Do you have unlocked bootloadrr
venugopalu007 said:
Do you have unlocked bootloadrr
Click to expand...
Click to collapse
no, i have made anything to the phone
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Rommco05 said:
ufff, factory reset in stock recovery? Or try again repeat setup
edit: how you fix boot to ROM?
Click to expand...
Click to collapse
i made the factory reset but the phone is stuck in startup. don´t exit the startup
i have some firmwares for this and i try lol if i can make this to work right i make here my all processe and links for everyone. but know i'm stuck on this
Rommco05 said:
It is Nougat or Marshmallow?
Click to expand...
Click to collapse
Marshmallow
Rommco05 said:
Again flash ROM via dload
Click to expand...
Click to collapse
i made but is the same
MagicMinds said:
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Click to expand...
Click to collapse
hold a moment , do you use VOLTE based Sim??
Honor 8 FRD-AL00 Briked
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
bugsbunny69 said:
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
Click to expand...
Click to collapse
Are you able to flash twrp?
Unfortunately, I can not get in any way to restart with recovery from SDcard but it does not recognize any firmware stops at 5% with the following message (software install failed).
thank you!
Rommco05 said:
U can boot to fastboot, if yes which status have FRP and PHONE are both unlocked?
Click to expand...
Click to collapse
No! I have already explained it does not enter fastboot and is not recognized by the PC, the only way is sd card but I tried various firmware stops at 5% even seza sd card.
When it enters sdcard recovery mode and connects to the PC it is reconnected in this way as a CDROM (linux file-cd gadget usb device).
Thank you!
Rommco05 said:
I don't know what next, leave him again discharged because u need fastboot and in recognise phone, if u can't boot to fastboot u can't do anything this a serious problem
Click to expand...
Click to collapse
I know I just have to try to give it back, hoping it's a guarantee with the Chinese people, I've already made a complaint that after two days the smartphone gave me problems, but the support office opens on 28/8.
Thanks for everything!
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
I need help ;-;
gagi92bb said:
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
Click to expand...
Click to collapse
I have a honor 8 al00, i can't restore ;-;
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)
MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches
https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729
Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.
Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).
You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)
Please, consider to donate me something for the work and the risk (maybe idk). Thanks
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)
If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
Awesome saw u on r/OnePlus telegram
How did you get these files?
Could be from phonandroid, since the tool is there for download since 5 days .
MickyFoley said:
Could be from phonandroid, since the tool is there for download since 5 days .
Click to expand...
Click to collapse
The international one? Are you sure? I have found only the chinese that puts Hydrogen OS restoring
OnePlus telegram? Someone pm me the link
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
anthonythangaraj said:
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
Click to expand...
Click to collapse
Check Desktop Site box in your browser.
Plz mirror the link .
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
lerieur said:
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
Click to expand...
Click to collapse
No way; the techs come to you with this
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
mirror plzz
Panssee said:
mirror plzz
Click to expand...
Click to collapse
I'm trying to get developer permission to android file host
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
I will edit first post to explain all in detail
milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
done
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
joemossjr said:
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
Click to expand...
Click to collapse
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Test with 128 GB version about 10-15 minutes (with already installed drivers): OK
It runs like a new shipped OP6.
Fivegates said:
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Click to expand...
Click to collapse
Lol oh yeah
Qualcomm tool is not for fastboot or recovery mode, but for qualcomm drivers mode (USB to serial port).
So if you can boot to recovery or fastboot, probably don't need this pack.
Hello, i'm new on the forums!
I've been trying to update my phone (Honor 8) with the official update tool in the settings, but nothing is found.
But, when i go on the right corner of the update window, and i select "download the full package again", i've found an update (FRD-L09C432B407-FULL), but when i try to download it, it just starts, and directly displays a message "Download failed".
I've tried to use Firmware Finder, download an update (via VPN method), but none works, it just displays the same error ("Download failed").
My current version is FRD-L09C432B405, it's an european device (french, to be precise). It's not rooted, still on EMUI 5.0.1.
I've tried many things, but nothing worked, i don't why it doesn't want to download any update.
If somebody has a clue, i'd be glad to see it !
Thank you in advance,
TheSnipeFox
Install HiSuite on a PC, connect via USB and try updating through Hisuite.
BEHEMUUS said:
Install HiSuite on a PC, connect via USB and try updating through Hisuite.
Click to expand...
Click to collapse
Hi, thanks for your reply! Sadly, my Type-C port doesn't do data and quick charge anymore, it just charges it, but no data.
TheSnipeFox said:
Hi, thanks for your reply! Sadly, my Type-C port doesn't do data and quick charge anymore, it just charges it, but no data.
Click to expand...
Click to collapse
Are you sure that port is faulty? I had similar problem, no data and sometimes no quick charge, but I bought new cable and it works just fine
Asmod96 said:
Are you sure that port is faulty? I had similar problem, no data and sometimes no quick charge, but I bought new cable and it works just fine
Click to expand...
Click to collapse
Yup i'm 100% sure, another friend who has an Honor 8 too took my cable, and everything was fine for him (Quick charge / data). So, faulty type-c port
TheSnipeFox said:
Hello, i'm new on the forums!
I've been trying to update my phone (Honor 8) with the official update tool in the settings, but nothing is found.
Click to expand...
Click to collapse
in system OTA app, did you try to download latest full package, instead os a simple update search ? ("Télécharger le nouveau package complet" in french )
That's what allowed me to get an update lately.
pix106 said:
in system OTA app, did you try to download latest full package, instead os a simple update search ? ("Télécharger le nouveau package complet" in french )
That's what allowed me to get an update lately.
Click to expand...
Click to collapse
If i go for a normal update (so, the normal "check updates" button), it just doesn't find any update. If i try "télécharger le nouveau package complet", it finds the "FRD-L09C432B407-FULL" update, but it fails to download it. When i press "download and install", it waits for ~1second, and displays the error "download failed"
TheSnipeFox said:
If i go for a normal update (so, the normal "check updates" button), it just doesn't find any update. If i try "télécharger le nouveau package complet", it finds the "FRD-L09C432B407-FULL" update, but it fails to download it. When i press "download and install", it waits for ~1second, and displays the error "download failed"
Click to expand...
Click to collapse
Do you have an adblocker which could prevent from downloading ? If not, I'd suggest to clear system updates data and try again.
Hello,
I finaly found out a method how to establish USB-Connection with a "dead" honor 9 (wasn't recognized by computer/didn't turn on/just nothing).
WARNING!! YOUR warranty will be lost IF YOU OPEN HONOR 9!, no guarantee you get anything fixed/Maybe you break more!!
So I show you how I did it:
1: Open the Honor 9 Back: Tutorialvideo (not made by me)
https://www.youtube.com/watch?v=SUI5sA99nDw
- I used Hair Dryer + Knife to open the back. But use the tools in this video if you have.
2: - Install right USB-Drivers.: I needet the drivers "ASC-Driver_Handset WinDriver 2.01.00.00.exe" - You can find them in google!
3. - Connect the 2 Test Points like in my images. I used the SIM-Card tool from the phone to do it.
4. - Connect phone via USB - if everything gone right it shows up in the device manager as "HUAWEI USB COM 1.0"
5. - NOW We need an app or method to flash FirmWare in this mode... actually not supported by DC-Phoenix.... If any solution I edit in the thread.
6. UPDATE UPDATE! PHONE GOT REVIVED READ SECOND POST!
UPDATE UPDATE !
- HONOR 9 REVIVED FROM THE DEAD
- Downloaded DC-PHOENIX (dc-unlocker.com) ->Made Account/Charged Credits
- Connect the Phone via Testpoints, than open DC-Phoenix APP
- Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
-> Phone got revived. (NO MORE Huaway boot animation - I got strange red and green colors instead)
-> Open H9 in Fastboot mode (Turn phone off than: VOL+Down + USB CABLE PUT IN)
-> OPEN DC-PHOENIX
-> FLASHED "Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Austria_Poland_Denmark_Finland_Czech_Republic_Hungary.APP" with DC-Phoenix.
[UPDATE 2}
- You have to restore IMEI/SN/CARRIER AND COUNTRY AFTER UPDATING (empty board) with HCU Client - (You can find the software on dc-unlocker.com)
- THAN INSERT SIM CARD TO GET OFFICIAL OTA UPDATES.
-> 100% back to stock with full OTA, everything working, boot animation also back
What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........
sonneper said:
What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........
Click to expand...
Click to collapse
Failure in playing and experimenting with the Software.
ok , nevermind, you manage it ! good play : ) !
yz8_1337 said:
Do you also think this works with mine which bootloops after downgrading from Oreo to Nougat?
Click to expand...
Click to collapse
This should work with all damaged Smarpthones but I also think there are better and much softer techniques to revive looping or software side errors where the phone still turns on.
Maybe try via fastboot mode? But no OT please there are enough threads for it bro.
Revive via testpoints should always be the last option to revive a phone.
I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?
SusKuN1337 said:
I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?
Click to expand...
Click to collapse
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
i got told yesterday that the motherboard is broken, so, rest in peace honor 9 :<
I updated my phone with HuRUpdater and no my phone won't turn on. I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!
Rapid81 said:
I updated my phone with HuRUpdater and no my phone won't turn on
Click to expand...
Click to collapse
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Rapid81 said:
I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!
Click to expand...
Click to collapse
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.
oslo83 said:
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.
Click to expand...
Click to collapse
No, I did not saved the log. The update went well, no error or any difference. I updated my phone with HuRUpdater several times without problem.
I updated to STF-L09C432B376, but I had problems with that firmware and I went back to B371, as I did before, when I had issues with B374 as well.
Everything went well, and after B371, I installed Magisk v17, like always, pressed the reboot button and since that, the phone won't turn on.
Thanks for the link!
@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...
oslo83 said:
@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...
Click to expand...
Click to collapse
I just installed the mentioned driver, connected the phone and the "HUAWEI USB COM 1.0" showed up.
I wrote back to you.
DC-Phoenix give me an error when writing bootloader. I have a brick now.
Rapid81 said:
DC-Phoenix give me an error when writing bootloader. I have a brick now.
Click to expand...
Click to collapse
Have you tried to physically connect test point?
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
What's it mean? Use what to Flash?
Ccboxes said:
Have you tried to physically connect test point?
Click to expand...
Click to collapse
Yes, several times, with method was 100% worked. The main board died.
Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...
oslo83 said:
Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...
Click to expand...
Click to collapse
Could you give the IDT and frimware to me？I want to try before DC.
Ccboxes said:
Could you give the IDT and frimware to me？I want to try before DC.
Click to expand...
Click to collapse
IDT 2.0.0.9
https://bi-t.xyz/ozS5cy2kTm
---------- Post added at 06:40 ---------- Previous post was at 06:34 ----------
IDT shoud work with with original BoardSoftware not repacked like DC-unlocker's .dgtks .