ok i share the rom with the bug of tint in camrea and pictures for playing or found a solution fix camera gemini umi z.zip 14.8 Mo for third camera (install with twrp).
https://mega.nz/#!6p5BnbRT!ByEPYGbNlN2jV-ojDeJAPnEKkxBHcb5NZuyAwESXZKo
also you can restore a backup of the rom for umi z only ,you can restore with trwp (fix included)) https://mega.nz/#F!T0ZwDK7K!JWuMcqhMGy73XB1YiZ15AQ
it's a twrp version and it' better if you are already on nougat.
first make a bckup with twrp of your rom .
format and install the zip and reboot .
for umi z : for testing the camera you should install an other camera like lenovo camera https://www.androidfilehost.com/?fid=889764386195905998 or htc camera https://www.androidfilehost.com/?fid=673368273298961488 or other . the stock camera don' t work.
for umi z pro not tested . just replace the kernel from umi z by umi z pro kernel in the zip kernel)https://www.androidfilehost.com/?fid=673368273298977443.
gemini pro 7.1.1
https://www.androidfilehost.com/?fid=817550096634791460
Thx, is it not better to install per flash tool?
I tried gemini pro rom on umi z pro. Very lag Very slow. Can you Take us your expérience user ? A solution for the problem of lagg ?
scroful said:
I tried gemini pro rom on umi z pro. Very lag Very slow. Can you Take us your expérience user ? A solution for the problem of lagg ?
Click to expand...
Click to collapse
i have the umi z and installed with twrp , the rom work properly except the camera (green tint in camera and pictures).
the rom work with umi z kernel , the stock kernel is very laggy.
philipped346 said:
i have the umi z and installed with twrp , the rom work properly except the camera (green tint in camera and pictures).
the rom work with umi z kernel , the stock kernel is very laggy.
Click to expand...
Click to collapse
I can confirm. The rom works pefectly but has more battery drainage than MM. And camera bug too. But very stablein other hand and working on umi z pro following philipped346 instructions.
Sorry friends im newbies. I dont understand how to replace Kernel and when ?
---------- Post added at 07:59 AM ---------- Previous post was at 07:57 AM ----------
Juste for information. I use footej camera download on ac market. I put a Sticker on bw camera so i use Just one camera. It's seems to focus quikely. Perhaps its Just coïncidence.
philipped346 said:
ok i share the rom with the bug of tint in camrea and pictures for playing or found a solution
it's a twrp version and it' better if you are already on nougat.
first make a bckup with twrp of your rom .
format and install the zip and reboot .
for umi z : for testing the camera you should install an other camera like lenovo camera https://www.androidfilehost.com/?fid=889764386195905998 or htc camera https://www.androidfilehost.com/?fid=673368273298961488 or other . the stock camera don' t work.
for umi z pro not tested . just replace the kernel from umi z by umi z pro kernel in the zip kernel)https://www.androidfilehost.com/?fid=673368273298977443.
gemini pro 7.1.1
https://www.androidfilehost.com/?fid=817550096634791460
Click to expand...
Click to collapse
hey, can you make a umi z version without supersu, i would like to take magisk...i cant install this because i need stock boot img. pls
dobermann24 said:
hey, can you make a umi z version without supersu, i would like to take magisk...i cant install this because i need stock boot img. pls
Click to expand...
Click to collapse
ok i upload and when it's ok i share for you
https://www.androidfilehost.com/?fid=961840155545588088
THX. I have flash the original kernel from the newst n 7.1.1. it works xD and than magisk.
I dont understand if this solution Work on z pro
The bug whit the camera is not so good. Not Good pics
i have the gemini pro rom working fast but need help
i have a gemini pro rom working but no front camera not working but dont have green tint like you do i have to up load it somewhere so someone can try to fix it
anyone please upload a camera photo with lenovo camera or htc camera or any other camera app. is the quality fine ?
@LastStandingDroid hi there fellow. It seems theres been an update for this ROM but due to the boot.img patch on it, i cant apply it on UMIDIGI kernel. Can you somehow help adapt it ?
Here goes the link for the update:
https://drive.google.com/file/d/0BzM6V55mbzNcSWFtNzRZNVVuVzg/view?usp=sharing
It says that it improves the display responsivness (probably solves the navbar ghost touch bug) and improves dual camera quality. Will be biting my nails for an answer. jk
UPDATE:
Imanaged to apply the patch with the gemini pro boot.img but as expected the display lags a lot. In other hand, i noticed that the camera is better but still worst than MM
hello guys , i tried to install gemini nougat like you say, replace kernel umz by mu z pro nothing to do at each reboot im on noa bootlook. I format i tried another time, nothing. Always. For information i install with twrp. A solution ?
---------- Post added at 08:27 PM ---------- Previous post was at 08:26 PM ----------
Perhaps somebody can upload a version gemini pro nougat for umi z pro and for twrp ? Thks a lot. I return on MM noa because with the official umidigi nougat, a lot of problem with blutooth connection etc...
deviantor said:
@LastStandingDroid hi there fellow. It seems theres been an update for this ROM but due to the boot.img patch on it, i cant apply it on UMIDIGI kernel. Can you somehow help adapt it ?
Here goes the link for the update:
https://drive.google.com/file/d/0BzM6V55mbzNcSWFtNzRZNVVuVzg/view?usp=sharing
It says that it improves the display responsivness (probably solves the navbar ghost touch bug) and improves dual camera quality. Will be biting my nails for an answer. jk
UPDATE:
Imanaged to apply the patch with the gemini pro boot.img but as expected the display lags a lot. In other hand, i noticed that the camera is better but still worst than MM
Click to expand...
Click to collapse
Patches made for a specific device can't be applied on a phone with same soc since boot will differ. But it actually sounds like that improvement didn't do much? Best way to actually find if it's working as intended is to find full firmware of new update. If exist. But it sounds like you updated properly so it shouldn't be an issue?
What happen if you revert to stock umi z boot will display still be laggy?
LastStandingDroid said:
Patches made for a specific device can't be applied on a phone with same soc since boot will differ. But it actually sounds like that improvement didn't do much? Best way to actually find if it's working as intended is to find full firmware of new update. If exist. But it sounds like you updated properly so it shouldn't be an issue?
What happen if you revert to stock umi z boot will display still be laggy?
Click to expand...
Click to collapse
If i revert back to umidigi boot.img, the device just gets on a bootloop. Its like if it is only ok to use one or another boot.img at raw system install. I cant give you a better feedback on this update since the display is way too laggy with ulefone boot.img. Its like with this one, the refresh rate applyed is above what the screen suports and does like some sort of agressive frameskip with some blur effect during it :laugh:
deviantor said:
If i revert back to umidigi boot.img, the device just gets on a bootloop. Its like if it is only ok to use one or another boot.img at raw system install. I cant give you a better feedback on this update since the display is way too laggy with ulefone boot.img. Its like with this one, the refresh rate applyed is above what the screen suports and does like some sort of agressive frameskip with some blur effect during it [emoji23]
Click to expand...
Click to collapse
The thing is swapping the boot shouldn't be a issue you may however have to patch it in order to boot
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
The thing is swapping the boot shouldn't be a issue you may however have to patch it in order to boot
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
And how do I do that, mate?
deviantor said:
And how do I do that, mate?
Click to expand...
Click to collapse
As before magisk or Supersu.
Sent from my FRD-L09 using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tehnical Specification
OS: Android 4.4.4 (Kitkat) 5.0 and 5.0.2 (Lollipop Elephone official) 5.1.1 (Cyanogenmod 12.1)
Display: IPS LCD OGS 5.0, 720 x 1280 HD resolution 320 ppi
Processor: Mediatek MT6732 64-bit processor, Four 1.5 GHz Cortex-A53 cores, Mali-T760 Gpu
RAM: 2 GB
Memory: 16 GB, microSD 64 GB
Connections: Wi-Fi 802.11 b/g/n, Wi-Fi Hotspot, Bluetooth 4.0, 4G
Camera: 13 MPx (might be interpolated) (Sony sensor), 4128 x 3096, autofocuss, LED flashlight, 1080p video. 5.0 Mpx front camera (Also might be Interpolated)
FM Radio: +
GPS: with A-GPS, Glonass
More: 2 SIM Cards (microSIM), 4G
Weight and so on: 144.5 x 71.6 x 9.5 mm, 185 g
Battery: Li-Po 2700 mAh
Blaster 2 Official Firmware( works for Blaster too)
4pda http://4pda.ru/forum/index.php?showtopic=650827&st=160#entry43748011
Rooting
Best way is to flash root supporting rom via SP Flashtools.
Now you can think about "Do you really need it"
Recovery CWM (all credits to owner) Philz Recovery And Twrp[untested]Say thanks ! To @bigrammy
Backups
Adb
NEW RADIO FILE!
I flashed this radio file using THIS tutorial, it improved my 4G network, and somehow improved Gps.. somehow. Remember, Worked in Latvia, if you live in different country this might worse your results so you better do the backup first.
you just need to replace Imei at the end of the file, because using different Imei is illegal in some countries...
Roms----------------------
4.4.4
Flyme OS
Color Os
5.0
Official 5.0 Update
VibeUi 2.5 150510
VibeUi 2.5 150513
VibeUI 2.5 150527 (Untested, Latest doesn't always mean, the best, Personaly I think that 150510 is the best)
Ulephone Pro Ui
5.0.2
MiuiPro
Miui7 by MyStory
5.1.1
CyanogenMod12.1 20150526 Not recomended for now!
Cyanogenmod(ported) Recomended
Btw I am not responsible for:
1)Bricking Your phone
2)Starting A nuclear war *Spits three times over his shoulder*
3)Hard Bricking your phone
4)For your rage about bricking your phone
Links to support:
P6000 General Thread - Bug fixes, FAQ, general info.
Elephone P6000 (MTK6732) 64 bit 4G, 5" 2G/16G
P6000 Recovery Thread
Elephone Forums. (i really suggest registering to this site, and checking it regulary to see the newest news)
Official Website Just5
4PDA (Russian)
NiksSkersts said:
Good News, i recently flashed elephone P6000 preloader and lk.bin and it didn't brick, and even more good news that it booted lollipop http://bbs.elephone.hk/thread-2443-1-1.html but camera is not working. well the phone thinks that front camera is now back camera. So after all this it means that you can do firmware upgrade from Elephone P6000 and flash roms from it.
Click to expand...
Click to collapse
Hi bro,
First thanks for the tip off about the working touch in recovery It's very much appreciated :highfive:
Ok so as I understand your stock rom is 4.4.4 KK with no "L" update available from Just5
So you have flashed the Stock P6000 "L" Rom and all works except the camera seems to be switched front to back and vice versa
I assume you have tried the obvious like trying another camera app from play store?
Try flash back your stock lk.bin or flash the "L" version lk.bin if you didn't already do that then see if that makes any difference
I am sure I spotted some camera stuff in the config of the lk.bin
I could be wrong though as I have seen so much code lately things tend to blend into each other :laugh:
bigrammy said:
Hi bro,
First thanks for the tip off about the working touch in recovery It's very much appreciated :highfive:
Ok so as I understand your stock rom is 4.4.4 KK with no "L" update available from Just5
So you have flashed the Stock P6000 "L" Rom and all works except the camera seems to be switched front to back and vice versa
I assume you have tried the obvious like trying another camera app from play store?
Try flash back your stock lk.bin or flash the "L" version lk.bin if you didn't already do that then see if that makes any difference
I am sure I spotted some camera stuff in the config of the lk.bin
I could be wrong though as I have seen so much code lately things tend to blend into each other :laugh:
Click to expand...
Click to collapse
1)You're welcome bro
2)Yap stock KK rom , still no one knows about L update for Blaster, maybe when Ota for P6000 comes out there might be update to L for Blaster, but as i said it's a big question mark. (source Just5 Support)
3)I personally have flashed Flyme os(v4.v5,v6( i think)) Stock P6000 8.3 rom (Full flash and format, Including preloader, lk, custom and so on.) and then update to 8.4 via Ota( which seems to stopped working right at the moment( network connection error) And then Android L( also full flash and format, Including preloader, lk, custom and so on.) Beta 2 and Beta 3.
I wish that it would be like that, atleast both cameras would be working, ( alright let me explain, right now only front camera is working, it can take shots with 6mp, and for example if i would like to take picture of my head, it would be upside down, and in many diffrent colours. the worst thing is that you cant even switch to back camera( thats why i think that phone thinks that my front camera is now my back camera, and my back camera is now my front camera, which isnt selectable) i hope i didnt confuse you even more, because at 3pm and 0 hours of sleep, thinking and typing is not the thing you want to think about
4)Yap i tryed many different cameras, no luck
5)intresting so do flash but this time instead of using p6000 lk.bin i use stock lk.bin, hmm revolutionary idea ( as i said i did Firmware upgrade with all the p6000 sp flashtool files (including Preloader. lk.bin, custom.img and so on.)
Tryed The revolutionary idea kinda failed, phone still booted, but camera styed the same.
Wait There has been Miui Ported for p6000? its my favorite rom, and of course has some big bugs, but still waiting with my fingers crossed
NiksSkersts said:
1)You're welcome bro
Wait There has been Miui Ported for p6000? its my favorite rom, and of course has some big bugs, but still waiting with my fingers crossed
Click to expand...
Click to collapse
Hmmm
Even the Elephone as Stock has big problems with the camera mine too :laugh:
Can you try it with the Auto Rotation OFF and see if that improves things a little
I think we may need to wait for Elephone to fix things in the stock rom first before we try track down your issue.
Once fixed we may be able to decompile the camera apk and remap the camera's :fingers-crossed:
bigrammy said:
Hmmm
Even the Elephone as Stock has big problems with the camera mine too :laugh:
Can you try it with the Auto Rotation OFF and see if that improves things a little
I think we may need to wait for Elephone to fix things in the stock rom first before we try track down your issue.
Once fixed we may be able to decompile the camera apk and remap the camera's :fingers-crossed:
Click to expand...
Click to collapse
You do know that the camera issue is only for Android L, right?
Yeah if we compare Just5 and Elephone stock cameras somehow Just5 won the round, i dont know why but camera on Just5 stock takes better pictures than Elephone stock. but still
My galaxy ace 5mp camera takes better pictures than on both phone stock roms, on phones with 13 mp back and even 5mp front camera,
And btw whats with the chineese apps in Beta 3?
NiksSkersts said:
You do know that the camera issue is only for Android L, right?
Yeah if we compare Just5 and Elephone stock cameras somehow Just5 won the round, i dont know why but camera on Just5 stock takes better pictures than Elephone stock. but still
My galaxy ace 5mp camera takes better pictures than on both phone stock roms, on phones with 13 mp back and even 5mp front camera,
And btw whats with the chineese apps in Beta 3?
Click to expand...
Click to collapse
Hi,
Yes I know. :good:
I have not flashed L at all so I can't comment on it really but I know the Russians are complaining about the camera on beta 3 :laugh:
My KK camera quality is rubbish as you say :laugh:
Again I think it will be drivers issues like for our touch so lets wait for all the bugs to get sorted then look at your problem if it still remains that is.
bigrammy said:
Hi,
Yes I know. :good:
I have not flashed L at all so I can't comment on it really but I know the Russians are complaining about the camera on beta 3 :laugh:
My KK camera quality is rubbish as you say :laugh:
Again I think it will be drivers issues like for our touch so lets wait for all the bugs to get sorted then look at your problem if it still remains that is.
Click to expand...
Click to collapse
Actually There is a camera patch from Just5 Blaster made by z0rgent its posted in 4pda forums. but yeah kinda new Soc and it might take time till all the bugs are gone.
Just to chime in I captured the OTA download address's and both are 404 now.
The camera fix from z0rgent is 1 lib and the blaster kernel (what can't that kernel do).
For the blaster camera; I would suggest comparing some libs against the P6000 but if works fine on Flyme etc ...
With beta3 the Chinese apps took me all of 5 minutes to disable; I didn't expect them at all - with Flyme sure, but not a beta L. Perhaps it indicates the intended us of /custom; individual apps for various networks (similar to the three version of Flyme; but simpler as those are three full ROMs).
Just had a thought... couldn't we house gapps in /custom - I think it's big enough - with L at least.
Hi is the stock ROM available anywhere in any form?
xenonism said:
Hi is the stock ROM available anywhere in any form?
Click to expand...
Click to collapse
Nope, You can try using Elephone stock rom or flashtool rom files. but actually what part of the system do you need?
NiksSkersts said:
Nope, You can try using Elephone stock rom or flashtool rom files. but actually what part of the system do you need?
Click to expand...
Click to collapse
Actually, I own an Elephone P6000 and I wanted to find out whether certain small issues it has are fixed on the Blaster. Thanks for your reply, anyway.
xenonism said:
Actually, I own an Elephone P6000 and I wanted to find out whether certain small issues it has are fixed on the Blaster. Thanks for your reply, anyway.
Click to expand...
Click to collapse
I have my backup uploaded, btw. if you need pm me
I need blaster firmware, anyone van help me?
NiksSkersts said:
I have my backup uploaded, btw. if you need pm me
Click to expand...
Click to collapse
Hi bro,
Can you let me know if Just5 release a Android 5.0 Lollipop update :fingers-crossed:
It looks like we need their great kernel again for our P6000 recovery :laugh:
Regards bigrammy
bigrammy said:
Hi bro,
Can you let me know if Just5 release a Android 5.0 Lollipop update :fingers-crossed:
It looks like we need their great kernel again for our P6000 recovery :laugh:
Regards bigrammy
Click to expand...
Click to collapse
Actually Just5 is promising to lollipop ota at the end of March and start of April
Just5 sola Lollipop OTA arī marta beigās/aprīļa sākumā - darbs sāksies tikko kā MTK piedāvās bibliotēkas.
Click to expand...
Click to collapse
NiksSkersts said:
Actually Just5 is promising to lollipop ota at the end of March and start of April
Click to expand...
Click to collapse
Lets hope they do thanks. :highfive:
Is your phone still on 5.0 Lp or did you go back to stock.
bigrammy said:
Lets hope they do thanks. :highfive:
Is your phone still on 5.0 Lp or did you go back to stock.
Click to expand...
Click to collapse
Well recently contacted Just5 support and yes they conformed that the will release Lollipop and its being tested, but the cant promise that it will updateable throught ota. in that case i will send it to repair centre to update and somehow will try to do full dump.
Labdien!
Šobrīd tiek strādāts pie Lollipop atjauninājuma un tas tiek rūpīgi testēts,pagaidām vēl nevaram apsolīt vai būs iespējams atjaunot ar OTA palīdzību.
Ar cieņu/ Best Regards/ С уважением,
Just5
Click to expand...
Click to collapse
as for me i am on Just5 Stock.
NiksSkersts said:
Well recently contacted Just5 support and yes they conformed that the will release Lollipop and its being tested, but the cant promise that it will updateable throught ota. in that case i will send it to repair centre to update and somehow will try to do full dump.
as for me i am on Just5 Stock.
Click to expand...
Click to collapse
Thanks for this info bro :good:
I did not think it would be an OTA really so I think they may give you a download link for the upgrade rather than you having to send the phone back for upgrade
Thanks bro :highfive:
Reserved, why? because instead of editing my previous post, i clicked reply, and i didnt notice it...
Any news on lollipop update? Phone randomly shuts down, i hope that bug is covered.
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROM (based on Android 6.0)
- LineageOS 13.0: https://forum.xda-developers.com/showpost.php?p=72622415&postcount=153
Stock (Android 6.0)
- V3.07: https://cloud.mail.ru/public/Cc6Q/roXXK9wfS
- Latest Official: http://www.doogee.cc/bbs/viewtopic.php?f=10&t=25
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20161107
Flash Tool
- SP Flash Tool for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.3: https://forum.xda-developers.com/an...max-development-support-t3509692/post71199696
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Hi,
do we have a working TWRP for the Y6 Max?
Gesendet von meinem Y6 Max mit Tapatalk 2
Alberto96 said:
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
Recovery:
- TWRP Coming Soon
Click to expand...
Click to collapse
When is twrp avelible ? Is ther somebody works on it ?
Has anyone tried DirtyCow vulnerability with the stock ROM to see if it will give temporary root?
How useful is the default recovery mode in this phone?
thanks
Spanish forum
My Spanish is not so good, but if i read this right there is a working TWRP to this phone on Spanish forum called movilesdualsim.com
Can somebody check that and confirm it here if that's working? My own phone is still at transit even I ordered it ower 3 weeks ago from banggood.com
Jappe84 said:
My Spanish is not so good, but if i read this right there is a working TWRP to this phone on Spanish forum called movilesdualsim.com
Can somebody check that and confirm it here if that's working? My own phone is still at transit even I ordered it ower 3 weeks ago from banggood.com
Click to expand...
Click to collapse
https://www.movilesdualsim.com/tema/twrp-3-0-2-by-feligres-nat.164177/
This one right?
Alberto96 said:
....link...
This one right?
Click to expand...
Click to collapse
Yes.
Jappe84 said:
Yes.
Click to expand...
Click to collapse
i think it is from normal y, not the max one.
It is flashable and it boots, but my touch is not working
kadett 1 said:
i think it is from normal y, not the max one.
Click to expand...
Click to collapse
Not good. Someone understand spanish and read this Forum?
You need a wireless mouse, because of the not working touch. Your files can only be loaded from OTG device, flashdrive or something like this. I have no wireless mouse, thats why I can not try
You have to like the post or reply, then you get the download link.
kadett 1 said:
Not good. Someone understand spanish and read this Forum?
Click to expand...
Click to collapse
Not very usefull this twrp but for root it is OK. Can someone load this File here or Link it? I have wireless mouse.
Hello...
This recovery is for the Y6 Max. Works only with the rom of December (needrom)
The TWRP is functional only with mouse. The touchscreen does not work, But otherwise it is fully functional.
With that you can already be root Installing the SuperSU zip
I also have a CyanogenMod rom, but the sound does not work through the speaker. I'm trying to fix it.
I understand Spanish. The recovery by Feligres(NAT) was ported from Doogee Y6. It was updated on Saturday 14th January.
Update- sorry, I see now that Feligres himself has just answered the question!
Feligres said:
Hello...
This recovery is for the Y6 Max. Works only with the rom of December (needrom)
The TWRP is functional only with mouse. The touchscreen does not work, But otherwise it is fully functional.
With that you can already be root Installing the SuperSU zip
I also have a CyanogenMod rom, but the sound does not work through the speaker. I'm trying to fix it.
Click to expand...
Click to collapse
Thank you for this.
Is it possible to get touch working twrp from you ? It works for root and backup at home, but **** happens most when we are outside and dont have otg cabel and wireless mouse in the pocket...
There is a new Cyanogenmod recovery for Y6 Max in needrom.com. Has anybody tried it?
Yes, perfectly working :thumbup:
Gesendet von meinem Y6 Max mit Tapatalk 2
So I recently got this phone and my first concern with is that the stock rom that came with the phone is very meh. Also I am wondering if the phone will get any android upgrades?
The 7th release of android is a huge leap in both performance, memory management and more.
It does appear DOOGEE is fairly active in rolling out ROM updates and fixes for the y6 max
We need to convince them of the merits of providing hardware running AOSP with TWRP
Most critically they need to update Thier ROM with settings access to customize APN
doogee.cc/bbs/viewtopic.php?f=5&t=183
brenthasty said:
It does appear DOOGEE is fairly active in rolling out ROM updates and fixes for the y6 max
We need to convince them of the merits of providing hardware running AOSP with TWRP
Most critically they need to update Thier ROM with settings access to customize APN
doogee.cc/bbs/viewtopic.php?f=5&t=183
Click to expand...
Click to collapse
Interesting.
Reading through here, they "claim" they will provide android 7 for the phone. I would be very happy with that.
Also they need to seriously give out driver info and so on about the hardware we have. The CPU and GPU on this phone is decent enough but there needs some improvement and I am sure the community can help if they just provide info.
@gaguga did port the unofficial CM13 develloped for Honor 7 by @papsi. The rom is fast and stable., but please do not jump over the step of nandroid backuping your present rom, before testing this one.
Installation requirements:
1 your device must have any android 6 rom installed already
2 twrp recovery must be installed
Installation:
1 restart device into twrp recovery mode
2 make a backup of your firmware
3 wipe data/factory reset
4 Install Unofficial_CM13_Port for X2_FIXED.zip
5 if you need google apps and google services install the desired gapps pack .zip file
Download:
ROM: https://www.androidfilehost.com/?fid=889764386195901931 (thanks to ajsmsg78 for this 26th may 2017 fixed version)
Pico gapps : https://cloud.mail.ru/public/JsQ6/gYwaQXA3b
Other gapps packs if you need more than the pico pack : http://opengapps.org/, then choose ARMV4, android 6.0, and pick up another package (piconis zlso hère recommandée anyway)
Super Su: SuperSU_v2_71.zip
About GPS:
might need a reboot, once in a while
Not Working:
- Camera's zoom
- Double tap
- no smart-cover detection
- CyanogenMod only support one 4G slot on dual-sim phones, which means only the primary slot (not the hybrid) can get 4G if double sim is used
Other possible issues:
- if you face too much battery comsuption, greenify solves this issue
- colors mismatch In camera
More info:
http://4pda.ru/forum/index.php?showtopic=692755&st=3600#entry59165545
https://www.facebook.com/PsxProjectAD/
https://forum.xda-developers.com/honor-7/development/unsupported-cyanogenmod-13-honor-7-plk-t3542627
Video presentation:
https://www.youtube.com/watch?v=U0-f_-Tw7J0&feature=youtu.be
After Installation:
- Open Magisk Manager after first boot and go into settings and scroll down and enable Superuser Access if you want root.
- Open up Kernel Adiutor and set the cpu governors to performance if you wanna feel how fast this phone really is
- if you want another resolution than 360 , DPI can be changed in the settings or in build.prop
- if trouble to install apps through google play with "unsupported device" message, please try this with these values if direct editing, or download apk directly from google play store with evozi apk downloader, or use another market apps (apkpure, apkmiror...)
-if trouble with camera in some apps, go to settings->apps-Camera->permissons, and manually authorize each of your application that might use the camera
- if no 4G network with CMCC sim, please flash the factory rom, before flashing this CM ROM
Did you test it?
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Did you test it?
Click to expand...
Click to collapse
nope, just opening the thread as @gaguga doesn't feel confortable with english, but he'll follow what will be said here, hopefully. The video come from his device, on march 9th 2017.
According to me, the bugs list has to be augmented by further tests ...
the "more info" links in post #1, will give you ... more details
audioralf said:
Did you test it?
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
I hope this will convince you in reality
4pda
gaguga said:
I hope this will convince you in reality
4pda
Click to expand...
Click to collapse
I look forward on your or anyoneelse's report. I will not test it. AJ's KangVIP does all I need.
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
keeep up the good work !
Hi to everybody,
As i had read, that the Camrea is not working in CM13, I asked myself, what if you install a different camera App?
Is the Camera working finally?
Did someone tried that?
I am looking very forward to this ROM!
Thank u for ur work,
Greetz,
Ray
RayfG said:
Hi to everybody,
As i had read, that the Camrea is not working in CM13, I asked myself, what if you install a different camera App?
Is the Camera working finally?
Did someone tried that?
I am looking very forward to this ROM!
Thank u for ur work,
Greetz,
Ray
Click to expand...
Click to collapse
Replacing the program camera does not solve the problem.
Camera driver must be the cause, no?
Djiban said:
Camera driver must be the cause, no?
Click to expand...
Click to collapse
perhaps
gaguga said:
perhaps
Click to expand...
Click to collapse
Unfortunately I am not able to solute this Driver-Problem.
Nevertheless, there ist perhaps someone who has the knowledge for this Problem......
Greetz, Ray
What exactly isn't working? You may be able to take the camera firmware from stock B212 and replace the camera firmware in the CM rom with it. It's what we did with the Mi Max to get the camera working.
I tested this ROM in my X2 and actually the camera does not work and double tap. The resolution gets poor, very large and resembles the Motorola G3, but very, very large. The rest works everything.
Nor did replacing the camera app worked.
Update: in the settings has option to change the Dpi, and with that, it was very good ... but the camera is missing.
There's also no smart cover detection. I'm not too sure what would be done to get this working as I usually just flash things from here. Anyone have any ideas?
Wow, this is massive news! I hope this gets developed further. Although I'm already quite satisfied by the EMUI, a more "stock" Android rom should be "lighter", as my X2 is only the 16g version. Not to mention, any status or notification bar widget, and xposed modules should work as it should.
Does anyone know how to solve the camera problem that does not work on this ROM?
Germano1980 said:
Does anyone know how to solve the camera problem that does not work on this ROM?
Click to expand...
Click to collapse
I guess that if you ask AJ politely, perhaps he could solve the Driver Problem.
As i see, there is no one to put the right question.
Though, ill put the questtion on it's way.
@ajsmsg78
Would you please if you can assist in solving the camera problem on CM13.
I appreciate this very much!
Thx, Ray
I will try this as soon as the camera not working is fixed!
@ajsmsg78 could you help with this camera issue, please?
Germano1980 said:
@ajsmsg78 could you help with this camera issue, please?
Click to expand...
Click to collapse
Let me see if my friend will swap phones with me for the week and then I'll have the X2 and see about the camera bug.
Hey guys,
Just started to port LineageOS for UMI Z
[Reserved]
Hope then after UMI Z its easier to do a Z pro version too. Fingers crossed
Good luck
A version for the Z Pro would be really awesome.
Or is it even possible to use the same version?
marco.deluxe said:
A version for the Z Pro would be really awesome.
Or is it even possible to use the same version?
Click to expand...
Click to collapse
It is possible, only thing it's that dual camera might not work well or not work at all. Everything else its exactly the same as UMI Z.
The dual camera does not work properly with the original ROM.
My photos are only good in bokeh mode.
For all other options, the photos are very fuzzy and out of focus..
With the Open Camera the pictures are very good.
So I think that it is not a hardware problem.
marco.deluxe said:
The dual camera does not work properly with the original ROM.
My photos are only good in bokeh mode.
For all other options, the photos are very fuzzy and out of focus..
With the Open Camera the pictures are very good.
So I think that it is not a hardware problem.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673368273298961488 htc camera
https://www.androidfilehost.com/?fid=889764386195905998 lenovo camera
you can test the two cameras
Do these two apps support the dual camera ???
marco.deluxe said:
Do these two apps support the dual camera ???
Click to expand...
Click to collapse
work on umi z but for the pro i don't know
No, they do not support the dual camera.
I just tested it.
plytraid said:
Hey guys,
Just started to port LineageOS for UMI Z
Click to expand...
Click to collapse
Awesome
plytraid said:
Hey guys,
Just started to port LineageOS for UMI Z
Click to expand...
Click to collapse
how can you started to porto lineageOS to umi z if you dont have the source code from umi?
Ahah good question !
That's why I don't manage to continue this ???
Sorry everyone ?
I started before knowing exactly how to port, following the tutorial on LineageOS website, but now I am blocked ??
Damn, I have not ask this question because I was hoping that you had it by some miracle...
And here I thought that it was close...
Ahahaha sorry
Even, I'm building a little ROM custom based on Stock 7.1.1 with root access, magisked, and 2-3 apps pre-installed. Nothing really exciting.
plytraid said:
Ahahaha sorry
Even, I'm building a little ROM custom based on Stock 7.1.1 with root access, magisked, and 2-3 apps pre-installed. Nothing really exciting.
Click to expand...
Click to collapse
Great idear, but can you improve the camera that make better pics ?
FYI I have contacted Ulefone about release of source code for Gemini Pro (Umidigi Z Pro clone).
Email as follows:~
"Hi,
Can you confirm if the source code will ever be released for the Gemini Pro?
Thanks,
Loc
Hide quoted text
On 29 June 2017 at 11:04, [email protected] <[email protected]> wrote:
Hello,
We do have such a plan, but I am not sure that we can release source code as UleFone Gemini Pro is jointly developed by our company and other companys."
Talk about mixed messages?!?!?
Placeholder threads are not permitted.
To the OP, please report this post or PM me directly if you are going to provide a valid download link.
Thread closed.
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170811 by @Roma193 (4PDA): https://mega.nz/#!xdkSmIwA!VVCiZW2nQI0ccMGEjjrO5opJDZ_DpnRcmYEgmhd0gH0
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- None yet.
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @Roma193 (4PDA) : https://mega.nz/#F!IJlT1Z6L!Pu2WT9uihksvSDn4OQhnbA
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
I've achieved Magisk and went further to install xposed and my God YouTube adaway works perfectly!
Thanks to Rovo89, Topjohnwu and all others who made it possible.
I encountered several issues but will explain them later...
Am getting really excited now
Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!
Nonta72 said:
Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!
Click to expand...
Click to collapse
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold
Bolumstar said:
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold
Click to expand...
Click to collapse
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.
Nonta72 said:
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.
Click to expand...
Click to collapse
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.
using selfie flash as notofication led
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Bolumstar said:
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.
Click to expand...
Click to collapse
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
---------- Post added at 03:45 PM ---------- Previous post was at 03:41 PM ----------
devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There probably is an app in playstore that can do that, but it will consume your battery!
devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There's one on the play store I use.
It's just for sms, mms, calls
It doesn't consume much battery
Prof Reminder
CUSTOMIZING DOOGEE BL5000
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Nonta72 said:
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
Click to expand...
Click to collapse
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game
it does work for the "selfie flash"?
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro
Bolumstar said:
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game
Click to expand...
Click to collapse
Not quite sure that OUKITEL K6000 Plus has 7.1.1. It came with Android 7.0 and still runs that.
FYI, OUKITEL K6000 Plus and DOOGEE Y6 Nougat software was compiled by the same software group (HCT Group).
Build device is: hct6750_66_n. That's why it was easy to boot K6000 Plus kernel on the Y6 after injecting its drivers (LCM, especially). So, if the K6000 Plus gets Android 7.1.x, the Y6 will have it too (or I will port it). Still is it that DOOGEE did a good job with Nougat upgrade for the Y6 compared to Y6 MAX/3D that still runs Android 6.0.
devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro
Click to expand...
Click to collapse
You have to try and see!
devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose
Tnks for reply bro
Click to expand...
Click to collapse
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it
thanks alot will surely do..
Bolumstar said:
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it
Click to expand...
Click to collapse
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo
devendra.gonsalves said:
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo
Click to expand...
Click to collapse
Likely not!
Guys i am having difficulty Rooting my Doogee BL5000, i am getting to unlock the bootloader and installing TWRP but the phone wont boot after that, i keep having to Flash the firmware and try rooting again multiple times since i end up with the same difficulty
Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted
devendra.gonsalves said:
Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted
Click to expand...
Click to collapse
Use this method to root the phone: https://www.needrom.com/download/twrp-3-1-1-bl5000/
My BL5000 is currently rooted and everything is working ok.
Just after installing TWRP, you have to install SuperSU without rebooting the phone into Android: Boot into TWRP again, install SuperSU and then you can reboot your phone into Android.
The data partition asking for a password is solved formating that partition (bad solution, I know )
Wow.. didnt expect such quick response.... Thanks alot dude.. will try an give my feedback.. fingers crossed..
---------- Post added at 05:30 PM ---------- Previous post was at 05:06 PM ----------
Dudeeeeeeeeee.... Thanks a Million!!!! Works like a charm.... i been trying for 2 days now to get this phone rooted.. after 1st try and i saw the phone apps and data lost when unlocking the bootloader i was left trying to root the phone before i start using it.. now i gotta work on getting the IMEI back
Small issue guys.. i am trying to set fingerprint password.. its set to fingerprint & PIN, mt fingerprint unlocks the phone fine, however so does simply swiping up..
---------- Post added at 12:43 PM ---------- Previous post was at 12:35 PM ----------
it seems after sleeping for couple seconds it locks ok... but in the setting i have "automatically lock after sleep "Immediately"" and power button instantly locks "enabled"
o lord.. seems only i have issues.. sorry to b bothersome guys but here is a big issue nw... phone works AWESOME... wifi, fingerprint, screen, apps, everyting is ok except recently i noticed there is an issue with sim card.. it seems ok... phone showing full bar at the top but i cant make calls.... nor receive txt... after reboot its ok again for 1 call then i cant call again... helpppppp!!!! Maybe its the SIM?