Database Info

PIPO M6 [ROOT][Tools][Firmware][Roms][Profiles]

" Tools, firmware, tutorial , links and ROMs for this aweome Device. Most of the tool are compatible with any PIPO devices and others RK3188 devices ".
Firmware Official y Manual
WIFI http://www.pipo.cn/index.php?m=About&a=gujian_show&id=111
3G http:// www.pipo.cn/index.php?m=About&a=gujian_show&id=112
Custom ROM List :
New ROM base on KITKAT. http://freaktab.com/forum/tablet-support-android/pipo-tablets/development-projects/23815-pipo-m6-max/
PIPO M6 ¿?¿ - Chinese Dev http://pan.baidu.com/share/home?uk=2150961019&third=15
PIPO M6 WIFI - kasty http://www.arctablet.com/blog/forum/pipo-max-m6/pipo-m6-rooted-android-4-2-2-firmware-release-20130618/ Check dev website, there is new releases
PIPO M6 3G - kasty http://www.arctablet.com/blog/forum/pipo-tablets/pipo-m6-3g-model-rooted-android-4-2-2-firmware-release-20130604/
PIPO M6 WIFI - RileyROM 1.2 http://www.freaktab.com/showthread.php?5616-Pipo-M6-4-2-2-RileyROM-1-2 Check dev website
Firmware tools (Update Tools):
Firmware Flashing Tool Oficial http://www.pipo.cn/En/index.php?m=About&a=gujian_show&id=70
Rockchip Batch Tool version 1.7 http://www.solidfiles.com/d/747bdce149/
Driver ADB https://mega.co.nz/#!4V9xARCR!GSxLjCzT09b56E0rk4Cl5UcGJoY7EuT3rBHAmpWu0ps
ROOT PIPO (Generico) https://mega.co.nz/#!4NlhTarR!QkKT7k_loJ3yCXiQ1YBplwk3ZhEYq9XDyJX5NIkLE4w Instrucciones http://www.htcmania.com/showpost.php?p=9281295&postcount=368 Install ADB driver first
Generic Recovery CWM
http://androtab.info/clockworkmod/rockchip/rk3188/ Instructionshttp://androtab.info/clockworkmod/rockchip/install/
MultiUser (Profiles) Imcomplete (Manually works, ask for instructions!) https://mega.co.nz/#!AFc0WJ5J!OnlNRV1Mel-1YyQdRHPHKkX_sgZuMQQNrtOBKEr7pRQ Install ADB driver first
Mini script to switch to Recovery and Flash mode (Update) https://mega.co.nz/#!NJdGET5L!C-VTHQAqs5Z2WC88U-dL1g6SP6I-6KXKDrW2MG2Tv-w
Very basic commands for newb.
Cold Recovery instructions: hold ESC (big top button) , Volume+ and Power. (standard produce: release Power when PIPO Logo is showed)
Videos y Tutorials
Firmware Tutorial Update Official http://www.pipo.cn/En/index.php?m=Contact&a=index&id=248&type=3
Video Firmware Tutorial Update Officia http://goo.gl/Ybx6Y
Be careful with the scrips

willthrom said:
" Tools, firmware, tutorial , links and ROMs for this aweome Device. Most of the tool are compatible with any PIPO devices and others RK3188 devices ".
Firmware Official y Manual
Wifi y 3G versions http://www.pipo.cn/En/index.php?m=Product&a=show4&type=2&id=275
List ROM's Custom :
PIPO M6 ¿?¿ - Chinese Guy http://pan.baidu.com/share/home?uk=2150961019&third=15
PIPO M6 WIFI - kasty http://www.arctablet.com/blog/forum/pipo-tablets/pipo-m6-rooted-android-4-2-2-firmware-release-20130530/
PIPO M6 3G - kasty http://www.arctablet.com/blog/forum/pipo-tablets/pipo-m6-3g-model-rooted-android-4-2-2-firmware-release-20130604/
PIPO M6 WIFI - RileyROM http://www.freaktab.com/showthread.php?5266-Pipo-M6-Max-4-2-2-RileyROM-1-0
Firmware tools (Update Tools):
Firmware Flashing Tool Oficial http://www.pipo.cn/En/index.php?m=About&a=gujian_show&id=70
Rockchip Batch Tool version 1.7 http://www.solidfiles.com/d/747bdce149/
Driver ADB https://mega.co.nz/#!4V9xARCR!GSxLjCzT09b56E0rk4Cl5UcGJoY7EuT3rBHAmpWu0ps
ROOT PIPO (Generico) https://mega.co.nz/#!cBlB1BqT!APRWPn4q54kq985xYZrQ8FFrxzI_l_tYcedM21EUtsg Instalar antes driver ADB Install ADB driver first
Generic Recovery CWM
http://androtab.info/clockworkmod/rockchip/rk3188/ Instructionshttp://androtab.info/clockworkmod/rockchip/install/
MultiUser (Profiles) Imcomplete (Manually works, ask for instructions!)https://mega.co.nz/#!Zd9jxaBb!Njsj5B2PNDab7GGsgfc99h2jCKoems_dpolt-N_6NT8 Install ADB driver first
Mini script to switch to Recovery and Flash mode (Update) https://mega.co.nz/#!NJdGET5L!C-VTHQAqs5Z2WC88U-dL1g6SP6I-6KXKDrW2MG2Tv-w
Very basic commands for newb.
Cold Recovery instructions: hold ESC (big top button) , Volume+ and Power. (standard produce: release Power when PIPO Logo is showed)
Videos y Tutorials
Firmware Tutorial Update Official http://www.pipo.cn/En/index.php?m=Contact&a=index&id=248&type=3
Video Firmware Tutorial Update Officia http://goo.gl/Ybx6Y
Be careful with the scrips
Click to expand...
Click to collapse
Generic CWM is compatible with Pipo M6?

mml78 said:
Generic CWM is compatible with Pipo M6?
Click to expand...
Click to collapse
Yes It is a generic kernel, it should work in any Rockchip Device

willthrom said:
Yes It is a generic kernel, it should work in any Rockchip Device
Click to expand...
Click to collapse
Not working. Don't be so certain unless u have tried. I do so...:silly:

hoi_lai said:
Not working. Don't be so certain unless u have tried. I do so...:silly:
Click to expand...
Click to collapse
We have tried in different platforms.and it works.... What problem do you have? What is it happening? I am not who create the package but you can follow the builder´s thread.

hi, i would like to ask if PIPO M6 with internal 3g(with sim slot) is capable of doing regular calls and texts? thanks.

SquallDNA said:
hi, i would like to ask if PIPO M6 with internal 3g(with sim slot) is capable of doing regular calls and texts? thanks.
Click to expand...
Click to collapse
It only allows 3G Data

thank you very much, this will help me a lot!
I'm about to purchase the tablet, and nice to see some support from you awesome devs

Good forum for Pipo tablets
Zaatour36 said:
thank you very much, this will help me a lot!
I'm about to purchase the tablet, and nice to see some support from you awesome devs
Click to expand...
Click to collapse
Just some information. I found a nice forum that deals a lot with Pipo tablets. You can find it at http://www.freaktab.com
See you there :good:

Thanks man, really great help for me that I've just got this tablet! :good:
Is there any method or tool to get root on this device?
The link provided doesn't work....
Thanks again!

claro966 said:
Thanks man, really great help for me that I've just got this tablet! :good:
Is there any method or tool to get root on this device?
The link provided doesn't work....
Thanks again!
Click to expand...
Click to collapse
Updated link.
ROOT PIPO (Generico) https://mega.co.nz/#!4NlhTarR!QkKT7k_loJ3yCXiQ1YBplwk3ZhEYq9XDyJX5NIkLE4w Instrucciones http://www.htcmania.com/showpost.php?p=9281295&postcount=368 Instalar antes driver ADB Install ADB driver first

Hey guys,
anyone tried out the riley ROM 4.2.2 for the 3G version and could post his experiences. What are the advantages you get through this custom ROM?
Thanks

030basti said:
Hey guys,
anyone tried out the riley ROM 4.2.2 for the 3G version and could post his experiences. What are the advantages you get through this custom ROM?
Thanks
Click to expand...
Click to collapse
Yes, installed the version 1.2 a few days ago. Installation worked, no problem at all. Just follow the instructions in the readme file.
- Use the recovery.img form the 1.1 version zip.
- One more thing, the deleting (cant remember the correct name) did not count to 16384 as in the manual. It finishes at 4096. Had contact with the author and he agreed, the readme is not exact in this case.
Now, with the new image, I have full root, all Chinese apps are removed and all works really well.
Hope this helps
---------- Post added at 01:06 PM ---------- Previous post was at 01:02 PM ----------
claro966 said:
Thanks man, really great help for me that I've just got this tablet! :good:
Is there any method or tool to get root on this device?
The link provided doesn't work....
Thanks again!
Click to expand...
Click to collapse
Try Riley ROM 4.2.2 (Version 1.2) from FreakTab.com :good:
Regards

Hi,
Do you know if one of this rom works with multiple users?
I have a pipo M6 with 3G builtin.
Thanks,

willthrom said:
Updated link.
ROOT PIPO (Generico) https://mega.co.nz/#!4NlhTarR!QkKT7k_loJ3yCXiQ1YBplwk3ZhEYq9XDyJX5NIkLE4w Instrucciones http://www.htcmania.com/showpost.php?p=9281295&postcount=368 Instalar antes driver ADB Install ADB driver first
Click to expand...
Click to collapse
ROOTED!!! :highfive:
Thank YOU!

Otek3S said:
Hi,
Do you know if one of this rom works with multiple users?
I have a pipo M6 with 3G builtin.
Thanks,
Click to expand...
Click to collapse
So far, if you want multi user you have to do it manually.
Check what the script does and the you have to copy your current user to the new user folder as the apk to create user is not there.
/system/data/users
./0 == Current User
./10 == New User (could be any number)

Zaatour36 said:
thank you very much, this will help me a lot!
I'm about to purchase the tablet, and nice to see some support from you awesome devs
Click to expand...
Click to collapse
I can recommend www.pipomall.com. 1st bought a M8PRO from them and then a M6 and really great service with honest advice via online chat on their site. Got great deals as well and shipping via DHL was like 5 days from Hong Kong to New Zealand.
Both are great tablets - If you're keen on using it mostly for gaming you may have more issues with the M6 and game compatibility due to its high resolution - its no fault of the Pipo but the game devs still catering for the more popular resolutions.
Good value for money these little beauties

Any chance to have a custom recovery such CWM or TWRP?
Anyone does know if are already out?
Thanks

justFrancois said:
. 1st bought a M8PRO from them and then a M6 and really great service with honest advice via online chat on their site. Got great deals as well and shipping via DHL was like 5 days from Hong Kong to New Zealand.
Both are great tablets - If you're keen on using it mostly for gaming you may have more issues with the M6 and game compatibility due to its high resolution - its no fault of the Pipo but the game devs still catering for the more popular resolutions.
Good value for money these little beauties
Click to expand...
Click to collapse
can u root M8Pro with ROOT PIPO (Generico)?
Have u found some custom ROMS for M8Pro?
:fingers-crossed:

willthrom said:
So far, if you want multi user you have to do it manually.
Check what the script does and the you have to copy your current user to the new user folder as the apk to create user is not there.
/system/data/users
./0 == Current User
./10 == New User (could be any number)
Click to expand...
Click to collapse
What do you mean by check what the script does, which script?
Found the user dirs and can copy them, but i could find no script or anything resembling in my searches.
Really would like to add multi user support.
20-07 - I found something:
Add:
fw.max_users=5
to build.prop, then rebooting, enables the feature. This allows up to 5 users, change the number as desired.
This did actually add user section into settings menu and allowed to add user. However when log in with second user it hangs on com.android.provision.DefaultActivity. Original user still works fine.
I'll keep searching

OUKITEL U15 Pro - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- Latest Official: http://www.oukitel.com/latest-software-rom-for-all-oukitel-devices-48.html
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20161122
- 20161011
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3: https://mega.nz/#F!ZZtAECTI!sMewWLAy-t8Ofe865Fpetw​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

What about TWRP or root?

I found a report on how to port TWRP. Anone brave enough to try it?
chinaphonearena.com/forum/Thread-Tutorial-HOW-TO-PORT-TWRP-MT6735-MT6752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial

I have buy it and it's so good!!
How could I make TRWP??

Oh cant wait for TWRP

TWRP
ForbEx said:
Oh cant wait for TWRP
Click to expand...
Click to collapse
I create my own TWRP but is not 100 % you need connect to micro usb mouse for moving in menu because display not working
I root with tis my oukitel u 15 pro
flash only recovery with sp flash tool.
i dont response for errors !
https://uloz.to/!7dSJLPkXMoHD/recovery-img-rar"]https://uloz.to/!7dSJLPkXMoHD/recovery-img-rar

hi there... i've this device and i'am pretty much happy with it for the price could't ask better! Just a small issue; i can't check updates on device they show up from time to time but how can i acess the app to check myself? I ask this becouse it showed up a OTA update by wifi that i didn't want to do right away and now it didn't appear again... how can i acess it? i've checked all over, all options there's not an option to check for software update but the app for OTA update by wifi is running!

Hello, thanks its working awesome.

ROM
vicious186 said:
I create my own TWRP but is not 100 % you need connect to micro usb mouse for moving in menu because display not working
I root with tis my oukitel u 15 pro
flash only recovery with sp flash tool.
i dont response for errors !
https://uloz.to/!7dSJLPkXMoHD/recovery-img-rar"]https://uloz.to/!7dSJLPkXMoHD/recovery-img-rar
Click to expand...
Click to collapse
Do you have any custome ROM brother? My official ROM doesn't work well, the WiFi connect but its sometimes lost the internet access. I Need some advice

Just received official OTA update V17.
Anyone knows what's improved?
The description was just chinese.

Returned to V16, had Bluetooth connection issues. V16 seems to be more stable.
Gesendet von meinem U15 Pro mit Tapatalk
---------- Post added at 08:56 AM ---------- Previous post was at 08:43 AM ----------
muflih28 said:
Do you have any custome ROM brother? My official ROM doesn't work well, the WiFi connect but its sometimes lost the internet access. I Need some advice
Click to expand...
Click to collapse
You can find all ROM for U15 PRO on http://www.needrom.com/download/oukitel-u15-pro-2/

Napfgeist said:
Just received official OTA update V17.
Anyone knows what's improved?
The description was just chinese.
Click to expand...
Click to collapse
January 2017 Security Patches probably.

Do you have this rom ?
Napfgeist said:
Just received official OTA update V17.
Anyone knows what's improved?
The description was just chinese.
Click to expand...
Click to collapse
I tried to root on my device but it did not work, I changed the rom to those found on the needrom site but now I would like to go back to the original one to receive updates via ota, would you have this rom to make me available?

I have flashed Ver 17 from Needrom, but went back to Ver 16, includes OTA and for me its most stable version.

U15PRO will not update to nougat oukitel tell me....

pjsb1983 said:
U15PRO will not update to nougat oukitel tell me....
Click to expand...
Click to collapse
This is what OUKITEL sent me.

Alberto96 said:
This is what OUKITEL sent me.
Click to expand...
Click to collapse
1 de Março de 2017 10:05
hi, our software engineers haven't got the source code for android 7.0, so will not update android 7.0 for u15 Pro.

pjsb1983 said:
1 de Março de 2017 10:05
hi, our software engineers haven't got the source code for android 7.0, so will not update android 7.0 for u15 Pro.
Click to expand...
Click to collapse
Unfortunately it seems that they are lying, because the software is made by HCT, the same company who made the software for the U16 Max (running on the same CPU, but on Nougat) so...this is unacceptable.
The proof is here (U15 Pro): https://img.xda-cdn.com/hvOfn5X6ZDp6c6HyJLHZYraDQXI=/http://i.imgur.com/eBkjPUzl.png

Hi,
I have a U15 Pro and I have problem watching Youtube videos. I can't watch videos with 60fps, even after I changed the video quality to [email protected] Do you guys have the same problem?
The rom version is OUKITEL_U15_PRO_V17.0_20170207.
Kernel version is 3.18.19 2016/09/07.

now oukitel tell me they ill update u15pro in the end of next month to nougat....i m sory my bad english

DOOGEE BL5000 - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170811 by @Roma193 (4PDA): https://mega.nz/#!xdkSmIwA!VVCiZW2nQI0ccMGEjjrO5opJDZ_DpnRcmYEgmhd0gH0
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- None yet.
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.1.1 by @Roma193 (4PDA) : https://mega.nz/#F!IJlT1Z6L!Pu2WT9uihksvSDn4OQhnbA​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

I've achieved Magisk and went further to install xposed and my God YouTube adaway works perfectly!
Thanks to Rovo89, Topjohnwu and all others who made it possible.
I encountered several issues but will explain them later...
Am getting really excited now

Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!

Nonta72 said:
Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!
Click to expand...
Click to collapse
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold

Bolumstar said:
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold
Click to expand...
Click to collapse
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.

Nonta72 said:
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.
Click to expand...
Click to collapse
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.

using selfie flash as notofication led
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance

Bolumstar said:
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.
Click to expand...
Click to collapse
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
---------- Post added at 03:45 PM ---------- Previous post was at 03:41 PM ----------
devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There probably is an app in playstore that can do that, but it will consume your battery!

devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There's one on the play store I use.
It's just for sms, mms, calls
It doesn't consume much battery
Prof Reminder
CUSTOMIZING DOOGEE BL5000
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Nonta72 said:
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
Click to expand...
Click to collapse
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game

it does work for the "selfie flash"?
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro

Bolumstar said:
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game
Click to expand...
Click to collapse
Not quite sure that OUKITEL K6000 Plus has 7.1.1. It came with Android 7.0 and still runs that.
FYI, OUKITEL K6000 Plus and DOOGEE Y6 Nougat software was compiled by the same software group (HCT Group).
Build device is: hct6750_66_n. That's why it was easy to boot K6000 Plus kernel on the Y6 after injecting its drivers (LCM, especially). So, if the K6000 Plus gets Android 7.1.x, the Y6 will have it too (or I will port it). Still is it that DOOGEE did a good job with Nougat upgrade for the Y6 compared to Y6 MAX/3D that still runs Android 6.0.
devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro
Click to expand...
Click to collapse
You have to try and see!

devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose
Tnks for reply bro
Click to expand...
Click to collapse
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it

thanks alot will surely do..
Bolumstar said:
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it
Click to expand...
Click to collapse
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo

devendra.gonsalves said:
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo
Click to expand...
Click to collapse
Likely not!

Guys i am having difficulty Rooting my Doogee BL5000, i am getting to unlock the bootloader and installing TWRP but the phone wont boot after that, i keep having to Flash the firmware and try rooting again multiple times since i end up with the same difficulty

Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted

devendra.gonsalves said:
Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted
Click to expand...
Click to collapse
Use this method to root the phone: https://www.needrom.com/download/twrp-3-1-1-bl5000/
My BL5000 is currently rooted and everything is working ok.
Just after installing TWRP, you have to install SuperSU without rebooting the phone into Android: Boot into TWRP again, install SuperSU and then you can reboot your phone into Android.
The data partition asking for a password is solved formating that partition (bad solution, I know )

Wow.. didnt expect such quick response.... Thanks alot dude.. will try an give my feedback.. fingers crossed..
---------- Post added at 05:30 PM ---------- Previous post was at 05:06 PM ----------
Dudeeeeeeeeee.... Thanks a Million!!!! Works like a charm.... i been trying for 2 days now to get this phone rooted.. after 1st try and i saw the phone apps and data lost when unlocking the bootloader i was left trying to root the phone before i start using it.. now i gotta work on getting the IMEI back

Small issue guys.. i am trying to set fingerprint password.. its set to fingerprint & PIN, mt fingerprint unlocks the phone fine, however so does simply swiping up..
---------- Post added at 12:43 PM ---------- Previous post was at 12:35 PM ----------
it seems after sleeping for couple seconds it locks ok... but in the setting i have "automatically lock after sleep "Immediately"" and power button instantly locks "enabled"

o lord.. seems only i have issues.. sorry to b bothersome guys but here is a big issue nw... phone works AWESOME... wifi, fingerprint, screen, apps, everyting is ok except recently i noticed there is an issue with sim card.. it seems ok... phone showing full bar at the top but i cant make calls.... nor receive txt... after reboot its ok again for 1 call then i cant call again... helpppppp!!!! Maybe its the SIM?

Blu Life One X2/ Mini - Development

Welcome.
Very short about me: Most of you know me as ieatgravity, I ported TWRP Recovery a little less than a year ago and was able to achieve root on the Life One X2. Since then I have developed guides, auto rooting tools, roms, and I maintain BLOX2.com a dedicated site for all Life One X2 and Mini Development. I apologize for the long absence. However it seems as if this community has really bloomed from where I left off. I want to thank EVERYONE who has supported this development for our phone over the last year, whether it be financially, simple encouragement, thanks, prayers, or you even helping develop something new. I tried my best to credit everyone involved, though many have come and gone we hope YOU will take an interest and try your hand at developing!
As of now we have all been using the first thread we had for our device as a catch all for development, apps, support, general q&a's. Though it has worked for us up until now, a few of us have decided that we should have a dedicated thread to development ideas, topics and questions to keep everything organized.
For now this thread will support both the X2 & Mini. So when you post, please specify the device.
Table of contents:
List of current development to date
Great "How To's" and Guides
With all of that said, here is a consolidated list of all development to this date. If you don't see something on here please let me know and I will update it.
Roms
X2:
Stock - ieatgravity
Blox2core - ieatgravity
Lineage OS 13 - srgrusso
Drax - Draco
X2 Mini:
Stock - papacharlieecho
Minicore - papacharlieecho
Lineage OS 13 - srgrusso
Drax Mini - ieatgravity
Kernels
X2:
Butter Kernel - Draco
X2 Mini:
N/a
Apps:
Both:
Ultra Power Saver - Draco
CRAB-Custom Recovery Automated Backup- Draco
Similar devices
X2:
Redmi 3s
X2 Mini:
Yu Black
Wiko U codeFeel Prime
Source:
X2:
Source
Device Tree
X2 Mini:
TBA​
In the next post I will go over methods we have used to create everything. If you have any recommended methods on porting or how to do something feel free to add them. I will be updating and adding to this OP as new things come to light. Feel free to use this thread to post questions about or to show off your new development.
as always, Happy modding
-ieatgravity

Reserved for how tos and guides

Reserved

Another Reserve

Yet another reserved

Hi ieatgravityI have a question for you, I think you can help me. I have one wiko Ufeel prime and I rooted the phone blox2 or with drako auto-root tool wen it hade marshmallow Android. Do you no if this works in nougat 7.1.1? My thanks in advance ?

alex moymoy said:
Hi ieatgravityI have a question for you, I think you can help me. I have one wiko Ufeel prime and I rooted the phone blox2 or with drako auto-root tool wen it hade marshmallow Android. Do you no if this works in nougat 7.1.1? My thanks in advance ?
Click to expand...
Click to collapse
Personally I haven't tried. As I'm still running on marshmallow, but from what I gathered from the wiko thread i started months ago the auto root tools were not successful. So for the time being there is no root for 7.1.1

I confirm we can't flash anything in fastboot mode on ufeel prime 7.1.1.
We are looking for since September. Impossible to root.

foxyone0809 said:
I confirm we can't flash anything in fastboot mode on ufeel prime 7.1.1.
We are looking for since September. Impossible to root.
Click to expand...
Click to collapse
Has anyone attempted using Kingroot.apk (NOT KINGOROOT) to root then use a root flasher like flashify, rashr, official twrp app, to flash the custom recovery. From there root using magisk manager patch the boot.img, reboot into twrp then flash the patched_boot.img to boot partition. While still in TWRP, navigate to the kingroot.apk location within /system/app. Delete the kingroot.apk and reboot. At this point you should have a working systemless root without the sketchiness of using kingroot.
If anyone has the time to test this out let me know the results please.

ieatgravity said:
Has anyone attempted using Kingroot.apk (NOT KINGOROOT) to root then use a root flasher like flashify, rashr, official twrp app, to flash the custom recovery. From there root using magisk manager patch the boot.img, reboot into twrp then flash the patched_boot.img to boot partition. While still in TWRP, navigate to the kingroot.apk location within /system/app. Delete the kingroot.apk and reboot. At this point you should have a working systemless root without the sketchiness of using kingroot.
If anyone has the time to test this out let me know the results please.
Click to expand...
Click to collapse
I have try wit kingroot from pc with USB, but not with apk

Kingroot apk doesn't work

Hi ieatgravity ? about yours drax rom, does it work on wiko U Feel Prime? Maybe it's a dummy question but I have my doubts so it's better to ask you (OP) I think ? thanks in advance

Hi guys. I tried another thing in my Ufeel. One week now I have it with Red Wolf custom recovery and Viper_garlic rom 7.1.2 both for Yureka Black running. Everything works fine only with the recovery not. It's working but not 100%? I'm not a developer and I don't have the knowledge and tools for see what can do to better working. I thing sharing this with you guys it's important. And maybe someone with the knowledge (and time) want to see it. I try to get logs from the problems.
ps. Sorry for the bad English ?

New OTA update in France this morning. Version V39, always android 7.1.1. No bugs anymore with delay for unlock phone at reboot. Now fastboot devices is detected but always impossible to unlock. All commands says "unknown command"

Hi guys ? I found one thread for another wiko and it have the same problem but they found a way. I think maybe works for we to but I have no time ( work and new family member ?) maybe someone want to try
https://forum.xda-developers.com/android/help/root-how-to-root-wiko-view-t3740005
Ps- I tried the "Tinno" code in another wiko in nougat and it worked. Hope this is useful

Hello everybody, I just got the BLOX2 Mini and wanted to start working with it. I can see this thread hasn't been updated and that the blox2.com web is down. Can anyone direct me to the best resource available in order to unlock, install TWRP, root, etc. in the Mini, either in XDA or elsewhere? I noticed there's a long thread on the regular sized BLOX2 but I am not completely sure if what is available there will work in the mini.
Thanks!

Lineage 16 for Blu Life One X2 Mini?
Hi ieatgravity,
Are you still out there?
I'm wondering if Lineage 15 or 16 is also available for the Blu Life One X2 Mini?
Best daraabi

X2 is dead.
Guide to restore to stock and add TWRP/root is here: https://forum.xda-developers.com/showpost.php?p=77932487&postcount=6

Teclast Master T8 (E8C1) | General thread

Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Tricks and tips
Messengers (Facebook, Twitter etc) crush problem solutions: https://forum.xda-developers.com/android/help/solution-solving-problem-messengers-t3994365
Facebook login issue fix: https://forum.xda-developers.com/t/solution-facebook-login-issue-in-teclast-t8-e8c1.4169035/
Spare Parts
Battery (tested - suits and works fine): https://aliexpress.ru/item/10050030...earchweb0_0,searchweb201602_,searchweb201603_

Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse

_jonte said:
Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Click to expand...
Click to collapse
Just try any you like. Both ASUS and PIXEL Roms are stable

Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse
Sword900 said:
Just try any you like. Both ASUS and PIXEL Roms are stable
Click to expand...
Click to collapse
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?

I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.

_jonte said:
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?
Click to expand...
Click to collapse
What do you mean exactly?
doktorspin said:
I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.
Click to expand...
Click to collapse
Yes, all of them. You can "freeze" or delete unwanted Google apps. Do it manually or try to find scripts which can do this automatically.

Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.

dr.Dobermann said:
Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.
Click to expand...
Click to collapse
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?

Vox.Irae said:
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?
Click to expand...
Click to collapse
I added solution, check it and let me know if it works for u
It's possible to change brightness limits manually by editing firmware files, If there's a big problem for u and other users I can change its' range sometime. Just let me know what firmware u are using.

Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol

the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"

DrZocato said:
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"
Click to expand...
Click to collapse
I used the modified rom too and liked a lot, but I couldn't install some apps through the playstore and had problems to remove root (Magisk). So I installed ASUS ROM and it is very stable and everything is working great. I'll leave it and see what happens!
Thanks!

the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).

Sword900 said:
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).
Click to expand...
Click to collapse
Thank you!
I gave the tablet to my son, the Stock ROM that came on it is'nt good and so I put the ASUS ZenUI ROM. (After testing all others)
I hide Magisk and the ROM is working perfectly.
Thank you so much for the great work.
Happy 2020.

fix login facebook in Teclast T8
Failed to enter An unexpected error has occurred. Try again later. (IllegalArgumentException: Unknown URL content://com.facebook.katana.provider.UserValuesProvider/user_values)
https://forum.xda-developers.com/android/help/solution-facebook-login-issue-teclast-t4169035

Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.

alveox said:
Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.
Click to expand...
Click to collapse
Hi, man! I disassembled our device a year ago. So here you can see batteries photos, btw we have 2 here. I tried to find batteries by their part number but not succeded in it... If you will find it, please let the community know.
Screenshot
Captured with Lightshot
prntscr.com
Screenshot
Captured with Lightshot
prntscr.com

i need flat cable lcd to motherboard

Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you

Quannis said:
Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you
Click to expand...
Click to collapse
Links were updated. Check it out!