@gaguga did port the unofficial CM13 develloped for Honor 7 by @papsi. The rom is fast and stable., but please do not jump over the step of nandroid backuping your present rom, before testing this one.
Installation requirements:
1 your device must have any android 6 rom installed already
2 twrp recovery must be installed
Installation:
1 restart device into twrp recovery mode
2 make a backup of your firmware
3 wipe data/factory reset
4 Install Unofficial_CM13_Port for X2_FIXED.zip
5 if you need google apps and google services install the desired gapps pack .zip file
Download:
ROM: https://www.androidfilehost.com/?fid=889764386195901931 (thanks to ajsmsg78 for this 26th may 2017 fixed version)
Pico gapps : https://cloud.mail.ru/public/JsQ6/gYwaQXA3b
Other gapps packs if you need more than the pico pack : http://opengapps.org/, then choose ARMV4, android 6.0, and pick up another package (piconis zlso hère recommandée anyway)
Super Su: SuperSU_v2_71.zip
About GPS:
might need a reboot, once in a while
Not Working:
- Camera's zoom
- Double tap
- no smart-cover detection
- CyanogenMod only support one 4G slot on dual-sim phones, which means only the primary slot (not the hybrid) can get 4G if double sim is used
Other possible issues:
- if you face too much battery comsuption, greenify solves this issue
- colors mismatch In camera
More info:
http://4pda.ru/forum/index.php?showtopic=692755&st=3600#entry59165545
https://www.facebook.com/PsxProjectAD/
https://forum.xda-developers.com/honor-7/development/unsupported-cyanogenmod-13-honor-7-plk-t3542627
Video presentation:
https://www.youtube.com/watch?v=U0-f_-Tw7J0&feature=youtu.be
After Installation:
- Open Magisk Manager after first boot and go into settings and scroll down and enable Superuser Access if you want root.
- Open up Kernel Adiutor and set the cpu governors to performance if you wanna feel how fast this phone really is
- if you want another resolution than 360 , DPI can be changed in the settings or in build.prop
- if trouble to install apps through google play with "unsupported device" message, please try this with these values if direct editing, or download apk directly from google play store with evozi apk downloader, or use another market apps (apkpure, apkmiror...)
-if trouble with camera in some apps, go to settings->apps-Camera->permissons, and manually authorize each of your application that might use the camera
- if no 4G network with CMCC sim, please flash the factory rom, before flashing this CM ROM
Did you test it?
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Did you test it?
Click to expand...
Click to collapse
nope, just opening the thread as @gaguga doesn't feel confortable with english, but he'll follow what will be said here, hopefully. The video come from his device, on march 9th 2017.
According to me, the bugs list has to be augmented by further tests ...
the "more info" links in post #1, will give you ... more details
audioralf said:
Did you test it?
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
I hope this will convince you in reality
4pda
gaguga said:
I hope this will convince you in reality
4pda
Click to expand...
Click to collapse
I look forward on your or anyoneelse's report. I will not test it. AJ's KangVIP does all I need.
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
keeep up the good work !
Hi to everybody,
As i had read, that the Camrea is not working in CM13, I asked myself, what if you install a different camera App?
Is the Camera working finally?
Did someone tried that?
I am looking very forward to this ROM!
Thank u for ur work,
Greetz,
Ray
RayfG said:
Hi to everybody,
As i had read, that the Camrea is not working in CM13, I asked myself, what if you install a different camera App?
Is the Camera working finally?
Did someone tried that?
I am looking very forward to this ROM!
Thank u for ur work,
Greetz,
Ray
Click to expand...
Click to collapse
Replacing the program camera does not solve the problem.
Camera driver must be the cause, no?
Djiban said:
Camera driver must be the cause, no?
Click to expand...
Click to collapse
perhaps
gaguga said:
perhaps
Click to expand...
Click to collapse
Unfortunately I am not able to solute this Driver-Problem.
Nevertheless, there ist perhaps someone who has the knowledge for this Problem......
Greetz, Ray
What exactly isn't working? You may be able to take the camera firmware from stock B212 and replace the camera firmware in the CM rom with it. It's what we did with the Mi Max to get the camera working.
I tested this ROM in my X2 and actually the camera does not work and double tap. The resolution gets poor, very large and resembles the Motorola G3, but very, very large. The rest works everything.
Nor did replacing the camera app worked.
Update: in the settings has option to change the Dpi, and with that, it was very good ... but the camera is missing.
There's also no smart cover detection. I'm not too sure what would be done to get this working as I usually just flash things from here. Anyone have any ideas?
Wow, this is massive news! I hope this gets developed further. Although I'm already quite satisfied by the EMUI, a more "stock" Android rom should be "lighter", as my X2 is only the 16g version. Not to mention, any status or notification bar widget, and xposed modules should work as it should.
Does anyone know how to solve the camera problem that does not work on this ROM?
Germano1980 said:
Does anyone know how to solve the camera problem that does not work on this ROM?
Click to expand...
Click to collapse
I guess that if you ask AJ politely, perhaps he could solve the Driver Problem.
As i see, there is no one to put the right question.
Though, ill put the questtion on it's way.
@ajsmsg78
Would you please if you can assist in solving the camera problem on CM13.
I appreciate this very much!
Thx, Ray
I will try this as soon as the camera not working is fixed!
@ajsmsg78 could you help with this camera issue, please?
Germano1980 said:
@ajsmsg78 could you help with this camera issue, please?
Click to expand...
Click to collapse
Let me see if my friend will swap phones with me for the week and then I'll have the X2 and see about the camera bug.
Related
hi... I have found in a chinese forum Miui 6 based on cm11.... I would like to know if it is for 'our' mate7 or only for chinese mate... I mean is it for mt7-tl9/tl10? Maybe someone has tried it and can help us... Thanks!!
http://bbs.zhiyoo.com/forum.php?mod=viewthread&tid=9686540&mobile=yes
allevi said:
hi... I have found in a chinese forum Miui 6 based on cm11.... I would like to know if it is for 'our' mate7 or only for chinese mate... I mean is it for mt7-tl9/tl10? Maybe someone has tried it and can help us... Thanks!!
http://bbs.zhiyoo.com/forum.php?mod=viewthread&tid=9686540&mobile=yes
Click to expand...
Click to collapse
hello bro...
have you try it??
what version of your device?? mt-tl09 or mt7-tl10??
me mt7-tl10
No, i haven't tried it
I have tl10 too
I'd like to try it but i'm not sure that it is for tl10
i think there is miui 6 for mt7 L09
you can use this link:
http://en.miui.com/forum.php?mod=viewthread&tid=121399&highlight=mate%2B7
allevi said:
No, i haven't tried it
I have tl10 too
I'd like to try it but i'm not sure that it is for tl10
Click to expand...
Click to collapse
Hi bro..
I just now trying..
It work perfectly...
Use kangvip recovery n flash it..
So smoothly for me..
But not up to date miui version as now 5.8.14
Hope developer can make update on miui7 right now...
Fantastic!!
Thanks.. Tonight i'll try it!
Top!!
ghaf85 said:
Hi bro..
I just now trying..
It work perfectly...
Use kangvip recovery n flash it..
So smoothly for me..
But not up to date miui version as now 5.8.14
Hope developer can make update on miui7 right now...
Click to expand...
Click to collapse
hi
what aboat twrp recovery from android 5.1 beta B312 rom?
can i install honor 6 v5.8.15 by Slyder_Mi?
E.L.E.C.T.R.O.N.I.C said:
hi
what aboat twrp recovery from android 5.1 beta B312 rom?
can i install honor 6 v5.8.15 by Slyder_Mi?
Click to expand...
Click to collapse
i never install miui by Slyder_Mi yet...
please someone try it...
give some feedback...
ghaf85 said:
i never install miui by Slyder_Mi yet...
please someone try it...
give some feedback...
Click to expand...
Click to collapse
i`ll test it
But it may not be compatible with twrp , please give me the kangvip recovery link
thanks
E.L.E.C.T.R.O.N.I.C said:
i`ll test it
But it may not be compatible with twrp , please give me the kangvip recovery link
thanks
Click to expand...
Click to collapse
here kangvip recovery
[Custom Recovery] Tool for MT7-L09/ MT7-L10 (Asia)
ghaf85 said:
here kangvip recovery
[Custom Recovery] Tool for MT7-L09/ MT7-L10 (Asia)
Click to expand...
Click to collapse
Thanks
So I have to downgrade, because it was not compatible with twrp on 5.1 beta
One more question, do Google play and fingerprint work on miui that you installed?
E.L.E.C.T.R.O.N.I.C said:
Thanks
So I have to downgrade, because it was not compatible with twrp on 5.1 beta
One more question, do Google play and fingerprint work on miui that you installed?
Click to expand...
Click to collapse
there is no fingerprint on miui version...
gapps & google play work n no bugs...
i try on my MT7-TL10
my step...
- running kitkat 4.4.2 stock rom
- boot into Recovery Mate7 KangVIP
- wipe data/factory reset
- wipe cache partition
- flash [ ROM release ] Huawei Mate7 Unicom / mobile / OW / telecom version MIUI6 5.8.9 release _ based EMUI3.0_ dual card _Ry09iu
- 1st time boot startup...
- boot into recovery back then flash UPDATE-SuperSU-v2.46.zip
- flash gapps-kk-20150412-minimal-edition-signed.zip
done
walla...
now your are miui rom...
for apply crack theme...
install 4 apk file here..
some element gravitybox work..
---------------------------------------------------------------------------------------------------------------------------------------------------------------
bugs.
1. To support dual card dual standby, but only one signal icon displays
2. No data Network icon is displayed, you can set - notification and status bar to open the status bar displays speed, more intuitive to see whether the success of the network connection
icon 2. The signal is always full grid display, there is no way, fit out signal icon is displayed No service, but the actual signal, and I can always change the signal icon displays a full grid
3. MIUI dialing and SMS no card 1 and card 2 options, advance settings - Set the default master card (set up a dual card setup the card 1 main card , dialing and sending SMS is the card 1, otherwise set the card 2 main card, dialing and sending SMS is a card 2)
4. There may be other individual small problems are dual-card communications related to actual not expected to affect the daily use
5. No fingerprint unlock function, do not brush the mind of
if you want regular update, miui is the way to go. Of all the china brand handset, xiaomi with miui is the only one i see with consistent and regular update. Miui 6 is light years ahead from its original ancestor. In fact, apart from no-app-drawer, all other functions completely overshadow original android.
Emui, actually, is about the same in features / smoothness with miui. The unfortunate thing is its lack of / inconsistent update.
Hi guys, im using miui v6 for huawei honor 6 on my mate 7( 2gb version) you can download from offical miui website, i have this rom about a week and its pretty stable, only thing not working its bluetotth music , cos is cm11 kernel base, otherwise all good, 4g, signal bar... recording etc.. just to let you know folks,,, im apologise for my english
cheers
Not working with vodafone
Inviato dal mio SM-P905 utilizzando Tapatalk
tolsoon said:
Hi guys, im using miui v6 for huawei honor 6 on my mate 7( 2gb version) you can download from offical miui website, i have this rom about a week and its pretty stable, only thing not working its bluetotth music , cos is cm11 kernel base, otherwise all good, 4g, signal bar... recording etc.. just to let you know folks,,, im apologise for my english
cheers
Click to expand...
Click to collapse
Hi,
Can you give us a link please, and what is your mate 7 model (l09 - T10 - U10 ...) ?
What is the install procedure (ROM version we must have, recovery etc...) ?
Does the rom your say is multilingual (i want to know if there are french language inside) ?
I tried the MIUI for Honor 6 with my TL 10 and using Kitkat TWRP as well as CWM but got stuck at the Mi Boot screen. I guess its only for the 2 GB version. IF someone could upload the one created from the BBS forums I'll surely give it another go
blitzkriegger said:
I tried the MIUI for Honor 6 with my TL 10 and using Kitkat TWRP as well as CWM but got stuck at the Mi Boot screen. I guess its only for the 2 GB version. IF someone could upload the one created from the BBS forums I'll surely give it another go
Click to expand...
Click to collapse
which working TWRP or CWM or Kangvip recovery??
I have installed it with twrp without problems
It works very well except vodafone problem
allevi said:
I have installed it with twrp without problems
It works very well except vodafone problem
Click to expand...
Click to collapse
google play work??
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROM (based on Android 6.0)
- LineageOS 13.0: https://forum.xda-developers.com/showpost.php?p=72622415&postcount=153
Stock (Android 6.0)
- V3.07: https://cloud.mail.ru/public/Cc6Q/roXXK9wfS
- Latest Official: http://www.doogee.cc/bbs/viewtopic.php?f=10&t=25
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20161107
Flash Tool
- SP Flash Tool for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.3: https://forum.xda-developers.com/an...max-development-support-t3509692/post71199696
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Hi,
do we have a working TWRP for the Y6 Max?
Gesendet von meinem Y6 Max mit Tapatalk 2
Alberto96 said:
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
Recovery:
- TWRP Coming Soon
Click to expand...
Click to collapse
When is twrp avelible ? Is ther somebody works on it ?
Has anyone tried DirtyCow vulnerability with the stock ROM to see if it will give temporary root?
How useful is the default recovery mode in this phone?
thanks
Spanish forum
My Spanish is not so good, but if i read this right there is a working TWRP to this phone on Spanish forum called movilesdualsim.com
Can somebody check that and confirm it here if that's working? My own phone is still at transit even I ordered it ower 3 weeks ago from banggood.com
Jappe84 said:
My Spanish is not so good, but if i read this right there is a working TWRP to this phone on Spanish forum called movilesdualsim.com
Can somebody check that and confirm it here if that's working? My own phone is still at transit even I ordered it ower 3 weeks ago from banggood.com
Click to expand...
Click to collapse
https://www.movilesdualsim.com/tema/twrp-3-0-2-by-feligres-nat.164177/
This one right?
Alberto96 said:
....link...
This one right?
Click to expand...
Click to collapse
Yes.
Jappe84 said:
Yes.
Click to expand...
Click to collapse
i think it is from normal y, not the max one.
It is flashable and it boots, but my touch is not working
kadett 1 said:
i think it is from normal y, not the max one.
Click to expand...
Click to collapse
Not good. Someone understand spanish and read this Forum?
You need a wireless mouse, because of the not working touch. Your files can only be loaded from OTG device, flashdrive or something like this. I have no wireless mouse, thats why I can not try
You have to like the post or reply, then you get the download link.
kadett 1 said:
Not good. Someone understand spanish and read this Forum?
Click to expand...
Click to collapse
Not very usefull this twrp but for root it is OK. Can someone load this File here or Link it? I have wireless mouse.
Hello...
This recovery is for the Y6 Max. Works only with the rom of December (needrom)
The TWRP is functional only with mouse. The touchscreen does not work, But otherwise it is fully functional.
With that you can already be root Installing the SuperSU zip
I also have a CyanogenMod rom, but the sound does not work through the speaker. I'm trying to fix it.
I understand Spanish. The recovery by Feligres(NAT) was ported from Doogee Y6. It was updated on Saturday 14th January.
Update- sorry, I see now that Feligres himself has just answered the question!
Feligres said:
Hello...
This recovery is for the Y6 Max. Works only with the rom of December (needrom)
The TWRP is functional only with mouse. The touchscreen does not work, But otherwise it is fully functional.
With that you can already be root Installing the SuperSU zip
I also have a CyanogenMod rom, but the sound does not work through the speaker. I'm trying to fix it.
Click to expand...
Click to collapse
Thank you for this.
Is it possible to get touch working twrp from you ? It works for root and backup at home, but **** happens most when we are outside and dont have otg cabel and wireless mouse in the pocket...
There is a new Cyanogenmod recovery for Y6 Max in needrom.com. Has anybody tried it?
Yes, perfectly working :thumbup:
Gesendet von meinem Y6 Max mit Tapatalk 2
So I recently got this phone and my first concern with is that the stock rom that came with the phone is very meh. Also I am wondering if the phone will get any android upgrades?
The 7th release of android is a huge leap in both performance, memory management and more.
It does appear DOOGEE is fairly active in rolling out ROM updates and fixes for the y6 max
We need to convince them of the merits of providing hardware running AOSP with TWRP
Most critically they need to update Thier ROM with settings access to customize APN
doogee.cc/bbs/viewtopic.php?f=5&t=183
brenthasty said:
It does appear DOOGEE is fairly active in rolling out ROM updates and fixes for the y6 max
We need to convince them of the merits of providing hardware running AOSP with TWRP
Most critically they need to update Thier ROM with settings access to customize APN
doogee.cc/bbs/viewtopic.php?f=5&t=183
Click to expand...
Click to collapse
Interesting.
Reading through here, they "claim" they will provide android 7 for the phone. I would be very happy with that.
Also they need to seriously give out driver info and so on about the hardware we have. The CPU and GPU on this phone is decent enough but there needs some improvement and I am sure the community can help if they just provide info.
ok i share the rom with the bug of tint in camrea and pictures for playing or found a solution fix camera gemini umi z.zip 14.8 Mo for third camera (install with twrp).
https://mega.nz/#!6p5BnbRT!ByEPYGbNlN2jV-ojDeJAPnEKkxBHcb5NZuyAwESXZKo
also you can restore a backup of the rom for umi z only ,you can restore with trwp (fix included)) https://mega.nz/#F!T0ZwDK7K!JWuMcqhMGy73XB1YiZ15AQ
it's a twrp version and it' better if you are already on nougat.
first make a bckup with twrp of your rom .
format and install the zip and reboot .
for umi z : for testing the camera you should install an other camera like lenovo camera https://www.androidfilehost.com/?fid=889764386195905998 or htc camera https://www.androidfilehost.com/?fid=673368273298961488 or other . the stock camera don' t work.
for umi z pro not tested . just replace the kernel from umi z by umi z pro kernel in the zip kernel)https://www.androidfilehost.com/?fid=673368273298977443.
gemini pro 7.1.1
https://www.androidfilehost.com/?fid=817550096634791460
Thx, is it not better to install per flash tool?
I tried gemini pro rom on umi z pro. Very lag Very slow. Can you Take us your expérience user ? A solution for the problem of lagg ?
scroful said:
I tried gemini pro rom on umi z pro. Very lag Very slow. Can you Take us your expérience user ? A solution for the problem of lagg ?
Click to expand...
Click to collapse
i have the umi z and installed with twrp , the rom work properly except the camera (green tint in camera and pictures).
the rom work with umi z kernel , the stock kernel is very laggy.
philipped346 said:
i have the umi z and installed with twrp , the rom work properly except the camera (green tint in camera and pictures).
the rom work with umi z kernel , the stock kernel is very laggy.
Click to expand...
Click to collapse
I can confirm. The rom works pefectly but has more battery drainage than MM. And camera bug too. But very stablein other hand and working on umi z pro following philipped346 instructions.
Sorry friends im newbies. I dont understand how to replace Kernel and when ?
---------- Post added at 07:59 AM ---------- Previous post was at 07:57 AM ----------
Juste for information. I use footej camera download on ac market. I put a Sticker on bw camera so i use Just one camera. It's seems to focus quikely. Perhaps its Just coïncidence.
philipped346 said:
ok i share the rom with the bug of tint in camrea and pictures for playing or found a solution
it's a twrp version and it' better if you are already on nougat.
first make a bckup with twrp of your rom .
format and install the zip and reboot .
for umi z : for testing the camera you should install an other camera like lenovo camera https://www.androidfilehost.com/?fid=889764386195905998 or htc camera https://www.androidfilehost.com/?fid=673368273298961488 or other . the stock camera don' t work.
for umi z pro not tested . just replace the kernel from umi z by umi z pro kernel in the zip kernel)https://www.androidfilehost.com/?fid=673368273298977443.
gemini pro 7.1.1
https://www.androidfilehost.com/?fid=817550096634791460
Click to expand...
Click to collapse
hey, can you make a umi z version without supersu, i would like to take magisk...i cant install this because i need stock boot img. pls
dobermann24 said:
hey, can you make a umi z version without supersu, i would like to take magisk...i cant install this because i need stock boot img. pls
Click to expand...
Click to collapse
ok i upload and when it's ok i share for you
https://www.androidfilehost.com/?fid=961840155545588088
THX. I have flash the original kernel from the newst n 7.1.1. it works xD and than magisk.
I dont understand if this solution Work on z pro
The bug whit the camera is not so good. Not Good pics
i have the gemini pro rom working fast but need help
i have a gemini pro rom working but no front camera not working but dont have green tint like you do i have to up load it somewhere so someone can try to fix it
anyone please upload a camera photo with lenovo camera or htc camera or any other camera app. is the quality fine ?
@LastStandingDroid hi there fellow. It seems theres been an update for this ROM but due to the boot.img patch on it, i cant apply it on UMIDIGI kernel. Can you somehow help adapt it ?
Here goes the link for the update:
https://drive.google.com/file/d/0BzM6V55mbzNcSWFtNzRZNVVuVzg/view?usp=sharing
It says that it improves the display responsivness (probably solves the navbar ghost touch bug) and improves dual camera quality. Will be biting my nails for an answer. jk
UPDATE:
Imanaged to apply the patch with the gemini pro boot.img but as expected the display lags a lot. In other hand, i noticed that the camera is better but still worst than MM
hello guys , i tried to install gemini nougat like you say, replace kernel umz by mu z pro nothing to do at each reboot im on noa bootlook. I format i tried another time, nothing. Always. For information i install with twrp. A solution ?
---------- Post added at 08:27 PM ---------- Previous post was at 08:26 PM ----------
Perhaps somebody can upload a version gemini pro nougat for umi z pro and for twrp ? Thks a lot. I return on MM noa because with the official umidigi nougat, a lot of problem with blutooth connection etc...
deviantor said:
@LastStandingDroid hi there fellow. It seems theres been an update for this ROM but due to the boot.img patch on it, i cant apply it on UMIDIGI kernel. Can you somehow help adapt it ?
Here goes the link for the update:
https://drive.google.com/file/d/0BzM6V55mbzNcSWFtNzRZNVVuVzg/view?usp=sharing
It says that it improves the display responsivness (probably solves the navbar ghost touch bug) and improves dual camera quality. Will be biting my nails for an answer. jk
UPDATE:
Imanaged to apply the patch with the gemini pro boot.img but as expected the display lags a lot. In other hand, i noticed that the camera is better but still worst than MM
Click to expand...
Click to collapse
Patches made for a specific device can't be applied on a phone with same soc since boot will differ. But it actually sounds like that improvement didn't do much? Best way to actually find if it's working as intended is to find full firmware of new update. If exist. But it sounds like you updated properly so it shouldn't be an issue?
What happen if you revert to stock umi z boot will display still be laggy?
LastStandingDroid said:
Patches made for a specific device can't be applied on a phone with same soc since boot will differ. But it actually sounds like that improvement didn't do much? Best way to actually find if it's working as intended is to find full firmware of new update. If exist. But it sounds like you updated properly so it shouldn't be an issue?
What happen if you revert to stock umi z boot will display still be laggy?
Click to expand...
Click to collapse
If i revert back to umidigi boot.img, the device just gets on a bootloop. Its like if it is only ok to use one or another boot.img at raw system install. I cant give you a better feedback on this update since the display is way too laggy with ulefone boot.img. Its like with this one, the refresh rate applyed is above what the screen suports and does like some sort of agressive frameskip with some blur effect during it :laugh:
deviantor said:
If i revert back to umidigi boot.img, the device just gets on a bootloop. Its like if it is only ok to use one or another boot.img at raw system install. I cant give you a better feedback on this update since the display is way too laggy with ulefone boot.img. Its like with this one, the refresh rate applyed is above what the screen suports and does like some sort of agressive frameskip with some blur effect during it [emoji23]
Click to expand...
Click to collapse
The thing is swapping the boot shouldn't be a issue you may however have to patch it in order to boot
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
The thing is swapping the boot shouldn't be a issue you may however have to patch it in order to boot
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
And how do I do that, mate?
deviantor said:
And how do I do that, mate?
Click to expand...
Click to collapse
As before magisk or Supersu.
Sent from my FRD-L09 using Tapatalk
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170811 by @Roma193 (4PDA): https://mega.nz/#!xdkSmIwA!VVCiZW2nQI0ccMGEjjrO5opJDZ_DpnRcmYEgmhd0gH0
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- None yet.
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @Roma193 (4PDA) : https://mega.nz/#F!IJlT1Z6L!Pu2WT9uihksvSDn4OQhnbA
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
I've achieved Magisk and went further to install xposed and my God YouTube adaway works perfectly!
Thanks to Rovo89, Topjohnwu and all others who made it possible.
I encountered several issues but will explain them later...
Am getting really excited now
Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!
Nonta72 said:
Doogee makes good phones and then throw them away like garbage by not giving proper support :/
Their forum is a nightmare!
Click to expand...
Click to collapse
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold
Bolumstar said:
That's the best analysis of Doogee so far...
If one can run a stable Linage OS on the BL5000 that be a dream to behold
Click to expand...
Click to collapse
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.
Nonta72 said:
Stable LingeagOS requires stable stock firmware (at best, kernel sources).
Doogee fails to provide either! Nougat update for the Y6 (16+2) was too bad. Fortunately they fixed part of that problem.
I have been working on RR 5.8.4 based on kernel 3.18.35 (nougat kernel) for Doogee Y6. It boots, has sound, fingerprint, sdcard and camera working. But bluetooth and wifi wouldn't switch on (SELinux related issue).
I don't have a BL5000 and I dropped all LOS (based) projects for Y6.
Click to expand...
Click to collapse
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.
using selfie flash as notofication led
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Bolumstar said:
Do you have anything on Y6 left on GitHub?
I may drop the BL5000 soon if Doogee don't atleast release the official stock Rom by themselves. The one available is stock Rom backup which works fine.
BL5000 Android 7 is stable and it came with Android 7 out of the box. It was interesting to know that they implement partition A/B in most of the BL5000 partition.
Click to expand...
Click to collapse
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
---------- Post added at 03:45 PM ---------- Previous post was at 03:41 PM ----------
devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There probably is an app in playstore that can do that, but it will consume your battery!
devendra.gonsalves said:
hey guys i bought one of the doogee bl5000 an will receive it in a few days... cant wait... the phone seems to lack a "notification LED" and was wondering if there is any way that u can use the selfie flash as notification LED.. tnks in advance
Click to expand...
Click to collapse
There's one on the play store I use.
It's just for sms, mms, calls
It doesn't consume much battery
Prof Reminder
CUSTOMIZING DOOGEE BL5000
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Nonta72 said:
There isn't much to put on github!
I used Elephone P9000 sources.
I have alos been working on custom kernel based on ported sources (from OUKITEL K6000 Plus).
The custom kernel (3.18.35) boots fine, has wifi, bluetooth, sound, touchscreen, sdcard, LCM but sleep and camera HAL are big issues (unable to solve, no official sources provided by DOOGEE).
The Alpha kernel is available here https://github.com/Nonta72/OUKITEL-K6000_Plus
Click to expand...
Click to collapse
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game
it does work for the "selfie flash"?
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro
Bolumstar said:
I've had a glance at it and my schedule is too tight now to start digging deeper into it.
OUKITEL K6000 Plus already on 7.1.1 DOOGEE need to step up their game
Click to expand...
Click to collapse
Not quite sure that OUKITEL K6000 Plus has 7.1.1. It came with Android 7.0 and still runs that.
FYI, OUKITEL K6000 Plus and DOOGEE Y6 Nougat software was compiled by the same software group (HCT Group).
Build device is: hct6750_66_n. That's why it was easy to boot K6000 Plus kernel on the Y6 after injecting its drivers (LCM, especially). So, if the K6000 Plus gets Android 7.1.x, the Y6 will have it too (or I will port it). Still is it that DOOGEE did a good job with Nougat upgrade for the Y6 compared to Y6 MAX/3D that still runs Android 6.0.
devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose which? because i kno of apps that make rear camera flash but i am lookin for one to make the selfie flash u kno like to make use if it as a notification led while the phone is laid on a table or so an screen faced upwards
Tnks for reply bro
Click to expand...
Click to collapse
You have to try and see!
devendra.gonsalves said:
it works for the "selfie Flash? or rear camera flash? or both? or u can choose
Tnks for reply bro
Click to expand...
Click to collapse
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it
thanks alot will surely do..
Bolumstar said:
It works with the selfie flash. You can choose either the back or front (selfie) flash NOT BOTH at the same time.
There's also plenty of customization. Just try it
Click to expand...
Click to collapse
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo
devendra.gonsalves said:
thanks alot will surely do.. hope doogee makes updates for the BL5000 like to android Oreo
Click to expand...
Click to collapse
Likely not!
Guys i am having difficulty Rooting my Doogee BL5000, i am getting to unlock the bootloader and installing TWRP but the phone wont boot after that, i keep having to Flash the firmware and try rooting again multiple times since i end up with the same difficulty
Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted
devendra.gonsalves said:
Actually it seems that after installing Twrp an rebooting, the OS is no longer Recnogised by the phone, also when i open TWPR its Asking for password, i entered the correct phone password and password fails, i think its having error and making TWRP not being able to Decrypt the Data... plz help... i really want this phone rooted
Click to expand...
Click to collapse
Use this method to root the phone: https://www.needrom.com/download/twrp-3-1-1-bl5000/
My BL5000 is currently rooted and everything is working ok.
Just after installing TWRP, you have to install SuperSU without rebooting the phone into Android: Boot into TWRP again, install SuperSU and then you can reboot your phone into Android.
The data partition asking for a password is solved formating that partition (bad solution, I know )
Wow.. didnt expect such quick response.... Thanks alot dude.. will try an give my feedback.. fingers crossed..
---------- Post added at 05:30 PM ---------- Previous post was at 05:06 PM ----------
Dudeeeeeeeeee.... Thanks a Million!!!! Works like a charm.... i been trying for 2 days now to get this phone rooted.. after 1st try and i saw the phone apps and data lost when unlocking the bootloader i was left trying to root the phone before i start using it.. now i gotta work on getting the IMEI back
Small issue guys.. i am trying to set fingerprint password.. its set to fingerprint & PIN, mt fingerprint unlocks the phone fine, however so does simply swiping up..
---------- Post added at 12:43 PM ---------- Previous post was at 12:35 PM ----------
it seems after sleeping for couple seconds it locks ok... but in the setting i have "automatically lock after sleep "Immediately"" and power button instantly locks "enabled"
o lord.. seems only i have issues.. sorry to b bothersome guys but here is a big issue nw... phone works AWESOME... wifi, fingerprint, screen, apps, everyting is ok except recently i noticed there is an issue with sim card.. it seems ok... phone showing full bar at the top but i cant make calls.... nor receive txt... after reboot its ok again for 1 call then i cant call again... helpppppp!!!! Maybe its the SIM?
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Tricks and tips
Messengers (Facebook, Twitter etc) crush problem solutions: https://forum.xda-developers.com/android/help/solution-solving-problem-messengers-t3994365
Facebook login issue fix: https://forum.xda-developers.com/t/solution-facebook-login-issue-in-teclast-t8-e8c1.4169035/
Spare Parts
Battery (tested - suits and works fine): https://aliexpress.ru/item/10050030...earchweb0_0,searchweb201602_,searchweb201603_
Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse
_jonte said:
Hey man, thanks for your works for this tablet! I've got one in the mail...
What ROM is your your favourite and recommend trying out first?
Click to expand...
Click to collapse
Just try any you like. Both ASUS and PIXEL Roms are stable
Sword900 said:
Here I will post useful info, firmwares, etc for Teclast T8 master. You can ask any related questions here.
Official Stock firmware
Link: http://www.teclast.com/en/
TWRP+ROOT
Link: https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647
Custom ROMs (for TWRP only)
Modified stock ROM: https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM: https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (BETA): https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM: https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
Click to expand...
Click to collapse
Sword900 said:
Just try any you like. Both ASUS and PIXEL Roms are stable
Click to expand...
Click to collapse
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?
I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.
_jonte said:
Do these ROMs have the slight but constant micro-stuttering that the stock ROM has?
Click to expand...
Click to collapse
What do you mean exactly?
doktorspin said:
I guess all these ROMs are loaded with Google's stuff?
With the exception of Play Store I'd like to be free of the Google fleet of useless apps.
It's great that you've been able to port these ROMs. I hope a lot of people use them. I just have different needs! Tx.
Click to expand...
Click to collapse
Yes, all of them. You can "freeze" or delete unwanted Google apps. Do it manually or try to find scripts which can do this automatically.
Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.
dr.Dobermann said:
Hi, I was thinking to buy this tablet.
Can these ROMs fix the issue of too high brightness even at the lowest level?
If not can you recommend a free application to solve the problem?
Better this or teclast m89 pro? Thanks.
Click to expand...
Click to collapse
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?
Vox.Irae said:
To solved this brightness issue I use the sFilter app or any other blue light filter app.
But to tell the truth, I wouldn't recommend to buy any Teclast tablet. I have a problem where he doesn't accept the installation of Instagram or Facebook app. I saw that many people have the same problem.
Anyone else with this problem or know how to solve?
Click to expand...
Click to collapse
I added solution, check it and let me know if it works for u
It's possible to change brightness limits manually by editing firmware files, If there's a big problem for u and other users I can change its' range sometime. Just let me know what firmware u are using.
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"
DrZocato said:
I use the modified rom and it comes with gapps. And with another very interesting option "PC mode"
Click to expand...
Click to collapse
I used the modified rom too and liked a lot, but I couldn't install some apps through the playstore and had problems to remove root (Magisk). So I installed ASUS ROM and it is very stable and everything is working great. I'll leave it and see what happens!
Thanks!
the.password said:
Hello dev!
Are you still working on this device firmware? I bought it this month and not even on official site could find updates for, so I don't know if there is any firmware that I should update before using these that you made...
I'm using Pixel Experience and found it great. But I had problems with the initial setup, which always had trouble trying to recover the configuration of another device. When I checked to set up as a new device it work fine.
I could not open Magisk too, but i wanted to disable it and remove, but always shows error when trying. I'll try MIUI in sequence to see if I can.
Another question: The modified Stock has gapps included? (and can I remove root?)
Thank you so much for your work, I was happy to know that have other firmware for this tablet.
PS.: sorry for the "google translator english", my english is poor. lol
Click to expand...
Click to collapse
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).
Sword900 said:
Hello!
1) There is no more firmwares to port for our device. Also I don't know much about modding firmwares, so Pixel was my first successful experiment.
2) Latest official firmware for our device is TOS v2.1 which can be found in appropriative thread here. Seems no more updates will be released for our device.
3) Restoring function is bad idea esp on custom ROM. You should always make clean installation.
4) Custom ROMs can only boot with root access (e.g. Magisk). You cant uninstall it. In other case your device wont boot (Android 7.0 classical issue). P.S Magisk is not like "classic" root, so you can "hide" it for apps that don't work on rooted device.
5) Of course stock ROM includes Gapps. All made changes are listed in topic. Root can'f be removed on any custom ROM (see p.4).
Click to expand...
Click to collapse
Thank you!
I gave the tablet to my son, the Stock ROM that came on it is'nt good and so I put the ASUS ZenUI ROM. (After testing all others)
I hide Magisk and the ROM is working perfectly.
Thank you so much for the great work.
Happy 2020.
fix login facebook in Teclast T8
Failed to enter An unexpected error has occurred. Try again later. (IllegalArgumentException: Unknown URL content://com.facebook.katana.provider.UserValuesProvider/user_values)
https://forum.xda-developers.com/android/help/solution-facebook-login-issue-teclast-t4169035
Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.
alveox said:
Hi all, just wonder if anyone have some kind of t8 teardown? my t8 volume button is kinda broken like 2 years ago and now its stop functioning. Also the battery is starting to swollen..
wanna try to see part number for it.
Click to expand...
Click to collapse
Hi, man! I disassembled our device a year ago. So here you can see batteries photos, btw we have 2 here. I tried to find batteries by their part number but not succeded in it... If you will find it, please let the community know.
Screenshot
Captured with Lightshot
prntscr.com
Screenshot
Captured with Lightshot
prntscr.com
i need flat cable lcd to motherboard
Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you
Quannis said:
Could you please share the download link of MIUI and Pixel Experience ROM again, the link of Mega has been lost. Thank you
Click to expand...
Click to collapse
Links were updated. Check it out!