Hi,
I am using Lenovo K52e78 VIBEUI_V3.0_1615_5.518.1_ST_K52e78.
I have flashed my phone with the following ROM:
"K52e78_china_to_A7020_S125.rar" which I retrieved from needrom website.
During flashing the following error pop up:
"BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Please help to resolve my problem as my phone is totally dead now.
Thank you.
Best regards
Fikri
fikri67 said:
Hi,
I am using Lenovo K52e78 VIBEUI_V3.0_1615_5.518.1_ST_K52e78.
I have flashed my phone with the following ROM:
"K52e78_china_to_A7020_S125.rar" which I retrieved from needrom website.
During flashing the following error pop up:
"BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Please help to resolve my problem as my phone is totally dead now.
Thank you.
Best regards
Fikri
Click to expand...
Click to collapse
Find your error on this list then follow the troubleshooting steps described.
https://forum.hovatek.com/thread-439.html
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Have u find your solution on this error. If yes so plz send me the solution bcoz i dont get it. Plz help me i wanr your help badly. Plz contact me on 9779116697 or email me on [email protected]. plz contact me as soon as possible.
Regards
Vivek kumar
To
Fikri
I've the same probleme, do you find a solution?
In my case i solved the issue by using a different setup. The error message hints at a possible timing issue with the device powering up before flashing takes place. Most tutorials online show how to use SP flash tool under Windows so i figured i'd run it in a Win7 VM. Unfortunately after the phone gets connected Virtualbox needs a second or two too long. During that time TWRP kicks in already (the phone was stuck in a recovery bootloop, which was the reason i wanted to re-flash the factory rom). So instead, i tried the Linux version of SP flash tool (on my Linux Mint laptop). That worked.
As a side note, the Linux version didn't work immediately, it complained about missing shared library libpng12.so
I got it working after installing it like this:
Code:
wget -q -O /tmp/libpng12.deb [url]http://mirrors.kernel.org/ubuntu/pool/main/libp/[/url]
&& sudo dpkg -i /tmp/libpng12.deb \
&& rm /tmp/libpng12.deb
Related
I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.
Ali147852 said:
I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your questions in your device's Q&A forum here:
A110 Q&A, Help and Troubleshooting
Good luck!
Hi guys i got a bricked phone, Android 5.1.1 spd sc7731,
The problem is my phone has a sim bug, so i use terminal emulator app (I followed the steps from google.com), and when I reboot my phone, it goes just a black screen and vibrates (bricked).
So i use upgradedownload tool to flas the .pac file of my rom and i got a problem, it says that _BKF_NV_W failed at 3secs, Any help or suggestions regarding this matter?? :crying:
Btw sry for my bad english thats not my primary language.
hmmmacky said:
Hi guys i got a bricked phone, Android 5.1.1 spd sc7731,
The problem is my phone has a sim bug, so i use terminal emulator app (I followed the steps from google.com), and when I reboot my phone, it goes just a black screen and vibrates (bricked).
So i use upgradedownload tool to flas the .pac file of my rom and i got a problem, it says that _BKF_NV_W failed at 3secs, Any help or suggestions regarding this matter?? :crying:
Btw sry for my bad english thats not my primary language.
Click to expand...
Click to collapse
hi
thank you for using xda assist
cant find any relevant thread regarding your device
but you can try posting here for help
http://forum.xda-developers.com/android/help
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. I followed all of the instructions on the ulefone-s website. When I started the flashing process I got a message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really approciate it. :fingers-crossed:
peti2ty said:
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. I followed all of the instructions on the ulefone-s website. When I started the flashing process I got a message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really approciate it. :fingers-crossed:
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have asked this question already here
https://forum.xda-developers.com/showthread.php?t=3531255
and here
https://forum.xda-developers.com/showthread.php?t=3531265
so I'll close this one up
Good Luck
Sawdoctor
At start, Happy New Year for everyone.
I've got Tablet Manta MID713 on MT6572. Mobo version is cp-706-mb-v1.3 .
I bricked it while I was trying to flash with wrong rom. After it I get 4032 error in sp flash tool (BROM ERROR: S_FT_ENABLE_DRAM_FAIL).
Had anyone any experience with tab like that and such error? I read that is preloader issue, I've downloaded some roms for that mobo but I've got error 4032 with every of them.
Help, please if u can.
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Solution: Found the solution after 6 months, and created a thread. Solution is explained there in detail: Infinix Bootloop Fix
Look inside here:
List of sp flash tool error codes, meanings & how to fix (solution)
Smart Phone Flash Tool also known as SP Flash Tool is a Desktop application used to flash firmware to Mediatek (MTK) Android devices. Its a pretty easy tool to use but you're bound to encounter one er
forum.hovatek.com
TechySkills said:
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Click to expand...
Click to collapse
Look for bypass utility and its instructions. It will help beat this error