Database Info

[Q] Installing ROM on MTK6575

Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!

I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?

Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...

I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..

HELP ME PLEASE :crying:

Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM

Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,

[Completed] Allview A5 Smiley does not turn on after flashing ROM. PLEASE HELP!!!

Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!

Another thing
doctorgadget said:
Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!
Click to expand...
Click to collapse
I`ve forgotten to say that first flashing was done with MT6572 and in sp flash tool I`ve checked Format & download all.

Hi there,
I'm sorry but I can't find anything related to your question/device.
You must start asking that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Lenovo A536 Problem

Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.

AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.

[Completed] Lenovo VIBE P1 bricked. Please help

Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.

yayator said:
Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in Vibe P1 Discussion Thread.Experts there may be able to help you
___
v7
XDA Assist

Thanks. I do it now

[Completed] Tried to root my Honor 4C and i got bootloop (i cant find help in others thread's)

Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!

refresh

ShowMustGoOn said:
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!
Click to expand...
Click to collapse
Thread closed.
Duplicate:
http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
Do not duplicate posts. Be patient and wait for a response in your original thread.