Database Info

Frp lock

Hi all,
I have problem. Since i unlocked bootloader, istalled twrp recovery, tryed to install custom rom. And its succses. Rom installed without errors. But in twrp recovery showing no os installed. And system wont boot. After phone restarts 2 times i tryed to boot again in twrp recovery. And after all it boot just in Huawei eRecovery. Trwp recovery id gone. And after that i booted phone in fastboot &rescue. Showing. Bootloader unlocked and new think FRP LOCK. What is that? Some one maybe can me explaine? What does it meen? In adb and fast boot i get errors when try to flash twrp recovery.img

r4ason said:
Hi all,
I have problem. Since i unlocked bootloader, istalled twrp recovery, tryed to install custom rom. And its succses. Rom installed without errors. But in twrp recovery showing no os installed. And system wont boot. After phone restarts 2 times i tryed to boot again in twrp recovery. And after all it boot just in Huawei eRecovery. Trwp recovery id gone. And after that i booted phone in fastboot &rescue. Showing. Bootloader unlocked and new think FRP LOCK. What is that? Some one maybe can me explaine? What does it meen? In adb and fast boot i get errors when try to flash twrp recovery.img
Click to expand...
Click to collapse
Do you have any official full rom?

HAIDERSHAH said:
Do you have any official full rom?
Click to expand...
Click to collapse
Yes i have, all roms downloaded,news and olders.

r4ason said:
Yes i have, all roms downloaded,news and olders.
Click to expand...
Click to collapse
Download huawei update.app extarctor and extract the update.app first.
then turn on adb terminal
flash recovery
cache
cust
boot
system
userdata
Your phone will work IN SHA ALLAH

HAIDERSHAH said:
Download huawei update.app extarctor and extract the update.app first.
then turn on adb terminal
flash recovery
cache
cust
boot
system
userdata
Your phone will work IN SHA ALLAH
Click to expand...
Click to collapse
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img

r4ason said:
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img
Click to expand...
Click to collapse
I tryed this, and tryed dc-unlocker pheonix program witch cost for me 15€ and nothing. Problem is i cant use normal adb all commands. Before it worked briliant.

r4ason said:
I cant use adb commands, just adb device,fastboot reboot bootloader. Others i get error. even i cant install twrp recovery.img
Click to expand...
Click to collapse
what are your commands and why you cant use them?
send me screen shot. i played with huawei devices since i had mate 1 years ago

HAIDERSHAH said:
what are your commands and why you cant use them?
send me screen shot. i played with huawei devices since i had mate 1 years ago
Click to expand...
Click to collapse
I created other post with minimal adb&fastboot. Just look in forum 3 posts bellow

r4ason said:
I tryed this, and tryed dc-unlocker pheonix program witch cost for me 15€ and nothing. Problem is i cant use normal adb all commands. Before it worked briliant.
Click to expand...
Click to collapse
you need to reinstall your adb. your commands will start working.
if you are using windows then go device manager and uninstall adb driver, then click search and it will reinstall the adb. after that try again the commands. thats what i do always when i stuck in that situation like yours.
or simply try another computer for adb

r4ason said:
I created other post with minimal adb&fastboot. Just look in forum 3 posts bellow
Click to expand...
Click to collapse
Since in phone was NXT-L29C432B320 firmware. I searched in internet its able to update to nougat. L29C432B521(beta).
I used dload method and phone get bricked. After that tryed rollback software to all older versions.And nothing, dload dont helped.
Next i writed to huawei custumservise and they gives me bootloader unlock code. I used it and succsesfull unlocked phone.
Next step was twrp revovery.img installed succsesfully.And worked fine.
Searched international custom rom for my device.And installed via twrp recovery without errors or faild. But in twrp meniu bellow i saw "os not installed"
After that phone restarted 2 times, and wont boot system. That twrp recovery disapier from phone. And until now im stuck here to find any soliution.
Yesturday i was tryed even dc unlocker pheonix program for 15€ and its not helped..

HAIDERSHAH said:
you need to reinstall your adb. your commands will start working.
if you are using windows then go device manager and uninstall adb driver, then click search and it will reinstall the adb. after that try again the commands. thats what i do always when i stuck in that situation like yours.
or simply try another computer for adb
Click to expand...
Click to collapse
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.

r4ason said:
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.
Click to expand...
Click to collapse
Did you tried the rollback package in dload? Use external sd.

gm007 said:
Did you tried the rollback package in dload? Use external sd.
Click to expand...
Click to collapse
Dload for me not working,tryed olders versions to rollback,but nothing. Dont pass 5%

r4ason said:
Dload for me not working,tryed olders versions to rollback,but nothing. Dont pass 5%
Click to expand...
Click to collapse
Dload for rollback package will pass,try it.
And if successful dload full firmware.
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399/page1

gm007 said:
Dload for rollback package will pass,try it.
And if successful dload full firmware.
Click to expand...
Click to collapse
Where i can get this package fot NXT-L29C432B320?

r4ason said:
Where i can get this package fot NXT-L29C432B320?
Click to expand...
Click to collapse
Can i use other country rollback package?

r4ason said:
Can i use other country rollback package?
Click to expand...
Click to collapse
I think so ,try russia's package,I gave you the link above.

r4ason said:
I tryed 2 computers, and reinstalled adb many times. Even tryed srk tools.
Click to expand...
Click to collapse
ok. i had the same issue. i am electronics engineer. and i repaired many phones this way

gm007 said:
I think so ,try russia's package,I gave you the link above.
Click to expand...
Click to collapse
Pass 76% and get software install failed

r4ason said:
Pass 76% and get software install failed
Click to expand...
Click to collapse
Try the 2 other packages.

Can't use twrp and start my honor 8

Hello,
Sorry for this post but i have a real problem !
I have install a twrp and root my phone for flash rom but now i have factory rest and haven't any OS...
I cant' launch twrp and even i install with fastboot. I have just "your device is booting now".
I don't know how to "backup" and repair my honor.
If anyone undernstand my problem...
ps : I'm really sorry for my english

If you need picture or more information please tell me ...

Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP

djx24 said:
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
Click to expand...
Click to collapse
Thanks for your answer
I try to install a recovery on fastboot but when i reboot my phone stay on "your device is booting now..." that's the problem ...

I have try to use "fastboot boot twrp.img" but failed because command not allowed.
Try to erase but not allowed too. I can flash recovery, or flash boot but change nothing...

Rommco05 said:
Try instal full fw (M B120 or B131) via dload method
Click to expand...
Click to collapse
dload method ? But i need my phone turned ON for that no ? or i need twrp ? But i can't use recovery mode. I can use only erecovery and fastboot.
Thanks for your message

Rommco05 said:
...??? no. Turn off phone and turn on with buttons vol+/vol-/on,off press together. Make folder on SDcard dload/ put inside unzip full fw.
Click to expand...
Click to collapse
Thanks you ! Installing update...
I think it work
(Sorry for all i'm a noob ...)

Honor 8 Bricked

Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.

Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk

gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs

adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk

HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !

Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !

So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk

The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.

Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?

Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).

Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.

I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.

Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.

technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.

I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor

Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?

morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.

Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk

Huawei ascend G8 stock rom for UAE region needed..

I need the stock firmware for Huawei G8(UAE region) to unbrick my device.
Can someone plz upload it for me?

Hello,
Brother more info please is the model RIO-L01 or what?
And what is the problem exactly?

-Hope- said:
Hello,
Brother more info please is the model RIO-L01 or what?
And what is the problem exactly?
Click to expand...
Click to collapse
I tried to root my device after rooting it went into a boot loop then I flashed it with it custom rom using twrp it still didn't work out. Later I used clear data option in twrp and deleted everything including the rom....Now the message"No rom found " was shown in the recovery....So I tried to replace twrp with normal Huawei recovery, so I used the Huawei extractor tool to extract the recovery file and flash it...mistakenly I flashed Erecovery...now I am stuck with it.. I don't even enter fast-boot mode no even into the normal recovery and is not recognizable by pc
Now, the only way out is to flash stock rom using force update method (by pressing both volume buttons and power button simultaneously)
my phone details: https://ibb.co/kOzQCF

What command did you use to flash the ERecovery?
http://download-c.huawei.com/download/downloadCenter?downloadId=80950&version=321934&siteCode=lt
This is the EU ROM B340 for the L01
Also did you try reinstalling fastboot drivers?
Good luck!
Also next time when you encounter no OS please just move the zip file using the mount function
Or using a SD card

-Hope- said:
What command did you use to flash the ERecovery?
http://download-c.huawei.com/download/downloadCenter?downloadId=80950&version=321934&siteCode=lt
This is the EU ROM B340 for the L01
Also did you try reinstalling fastboot drivers?
Good luck!
Also next time when you encounter no OS please just move the zip file using the mount function
Or using a SD card
Click to expand...
Click to collapse
Thanks, but Will this rom work? because last time i tried flashing French rom and it didnt' work.

jackady said:
Thanks, but Will this rom work? because last time i tried flashing French rom and it didnt' work.
Click to expand...
Click to collapse
It is official
So give it a shot and directly from the company so give it a shot

-Hope- said:
It is official
So give it a shot and directly from the company so give it a shot
Click to expand...
Click to collapse
downloading!:good:

-Hope- said:
It is official
So give it a shot and directly from the company so give it a shot
Click to expand...
Click to collapse
that didnt work

jackady said:
that didnt work
Click to expand...
Click to collapse
Plug the phone to USB
Press vol down +power for a bit this must get you there, you flashed Erecovery but u still can get in fastboot as fastboot has a sepeate partition

-Hope- said:
Plug the phone to USB
Press vol down +power for a bit this must get you there, you flashed Erecovery but u still can get in fastboot as fastboot has a aepeate partition
Click to expand...
Click to collapse
yes iam there now....for the first time in 3 months.....now what to do?????

jackady said:
yes iam there now....for the first time in 3 months.....now what to do?????
Click to expand...
Click to collapse
Option one: flash twrp and then flash custom ROM
Option two: use huawei extractor to extract
System
Recovery
Boot
Cust
And flash them with these commands:
fastboot flash boot BOOT.IMG
fastboot flash recovery RECOVERY.IMG
fastboot flash system SYSTEM.IMG
fastboot flash cust CUST.IMG
Then reboot: fastboot reboot

-Hope- said:
Option one: flash twrp and then flash custom ROM
Option two: use huawei extractor to extract
System
Recovery
Boot
Cust
And flash them with these commands:
fastboot flash boot BOOT.IMG
fastboot flash recovery RECOVERY.IMG
fastboot flash system SYSTEM.IMG
fastboot flash cust CUST.IMG
Then reboot: fastboot reboot
Click to expand...
Click to collapse
that worked...cheers!!!

Blank screen bln-al30

Hello, i'm new here.
Please be patinet.
Basicly i bricked my honor 6x.
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
fastboot devices
show my device
any other fastboot option says Operation failed.
Can anybody help me?
Thank you

You tried dload method with correct firmware ??
I mean the exactly same build no wich you had before unlocking??

MapiospaMino said:
Hello, i'm new here.
Please be patinet.
Basicly i bricked my honor 6x.
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
fastboot devices
show my device
any other fastboot option says Operation failed.
Can anybody help me?
Thank you
Click to expand...
Click to collapse
Try adb reboot bootloader if it works tell me also try going into recovery via button combo power+Volume up if any of this work u will be able to fix

narshi shukla said:
You tried dload method with correct firmware ??
I mean the exactly same build no wich you had before unlocking??
Click to expand...
Click to collapse
Yes, i did.
Before flashing BLN-L21 firmware, i flashed BLN-AL30 firmware but it failed.
Did it a couple of time.
But with dc phoenix said that there were bln-l21 related firmware on, that's why i did dload method with BLN-L21 Firmware

xRevengerZee said:
Try adb reboot bootloader if it works tell me also try going into recovery via button combo power+Volume up if any of this work u will be able to fix
Click to expand...
Click to collapse
Already tried and just blank screen.

MapiospaMino said:
Already tried and just blank screen.
Click to expand...
Click to collapse
So sorry bro im also new and this is all i know but you must have done somthing worng while debranding can you tell me how you exactly rebranded and what guide you followed

xRevengerZee said:
So sorry bro im also new and this is all i know but you must have done somthing worng while debranding can you tell me how you exactly rebranded and what guide you followed
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one

MapiospaMino said:
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one
Click to expand...
Click to collapse
WIt for shank to arrive he will surely help you

How about restoring using erecovery?

MapiospaMino said:
https://forum.xda-developers.com/honor-6x/how-to/guide-to-debranding-rebranding-honor-6x-t3676201
This one
Click to expand...
Click to collapse
Try this for debranding to see if it makes any difference.
https://forum.xda-developers.com/honor-6x/how-to/guide-debranding-to-india-variant-bln-t3679402
xRevengerZee said:
WIt for shank to arrive he will surely help you
Click to expand...
Click to collapse
shank is for me? if it I will try my best if not then also I will help
---------- Post added at 10:03 AM ---------- Previous post was at 10:00 AM ----------
MapiospaMino said:
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Smartphone won't turn on. Just blank screen, but i can access to fastboot.
Thank you
Click to expand...
Click to collapse
Have you flashed the OEM info of L21 model?
Try flashing the 2nd file i.e. data file. Dont worry just put the file in dlaod and flash it. I was in same situation, and it was just a black screen while booting for 15 minutes. Flashed the 2nd file i.e. data file and it came up fine.
Try and report.
---------- Post added at 10:05 AM ---------- Previous post was at 10:03 AM ----------
itisiryan said:
How about restoring using erecovery?
Click to expand...
Click to collapse
It wont do with error unable to fetch firmware for you.
---------- Post added at 10:08 AM ---------- Previous post was at 10:05 AM ----------
MapiospaMino said:
I wanted to debrand it, so unlocked bootloader, rooted, flashed twrp.
Backed up everything with twrp, even oem.
Using Huawei tool, did a backup of oem.
Then flashed BLN-L21 firmware, but phone bootloped. So dload method with update.app of firmware BLN-L21C10B131, and with this method the update was successful. Tried to turn it on and:
Click to expand...
Click to collapse
What was your earlier build number? If it was Nougat, you should flash only Nougat version and not B131 for L21 as it will be MM based.

Sorry for being away @shashank1320
I copied in dload path on sd card this: http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
then tried with this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
But i cannot use dload method, because it won't turn on.
The device is recognized in fastboot if connected to pc through usb, but it's just a black screen(no powered)
http://prntscr.com/h04zig
edit 1: it's recognized as this by my computer
http://prntscr.com/h051dd

MapiospaMino said:
Sorry for being away @shashank1320
I copied in dload path on sd card this: http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
then tried with this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
But i cannot use dload method, because it won't turn on.
The device is recognized in fastboot if connected to pc through usb, but it's just a black screen(no powered)
http://prntscr.com/h04zig
edit 1: it's recognized as this by my computer
http://prntscr.com/h051dd
Click to expand...
Click to collapse
Use files in reverse order.
First use this file
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
Then http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
I hope you are doing it correctly with first unzipping the zip files and then putting the contents in dload folder and use dload method. It will work

shashank1320 said:
Use files in reverse order.
First use this file
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1723/g223/v86601/f1/full/update.zip
Then http://update.hicloud.com:8180/TDS/...N-AL30_all_cn/update_full_BLN-AL30_all_cn.zip
I hope you are doing it correctly with first unzipping the zip files and then putting the contents in dload folder and use dload method. It will work
Click to expand...
Click to collapse
Like this
http://prntscr.com/h05gkw
but still display wont turn on
usb cable isn connected

MapiospaMino said:
Like this
http://prntscr.com/h05gkw
but still display wont turn on
usb cable isn connected
Click to expand...
Click to collapse
Yes exactly. I hope this is under sd card and you are pressing keys correctly.

shashank1320 said:
Yes exactly. I hope this is under sd card and you are pressing keys correctly.
Click to expand...
Click to collapse
Yes E:\ is SDCard path
And i'm pressing vol - + vol + and power button simultaneosly
edit:
fastboot getvar rescue_version
rescue_version: rescue0.3
fastboot getvar rescue_phoneinfo
rescue_phoneinfo: BLN-L21C10B131
fastboot oem get-product-model
BLN-L21
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem get-psid
SN:YCP7N1760XXXXXXX
IMEI:8625100XXXXXXXX
IMEI1:86251XXXXXXXXX
Can get only this value from fastboot

MapiospaMino said:
Yes E:\ is SDCard path
And i'm pressing vol - + vol + and power button simultaneosly
edit:
fastboot getvar rescue_version
rescue_version: rescue0.3
fastboot getvar rescue_phoneinfo
rescue_phoneinfo: BLN-L21C10B131
fastboot oem get-product-model
BLN-L21
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem get-psid
SN:YCP7N1760XXXXXXX
IMEI:8625100XXXXXXXX
IMEI1:86251XXXXXXXXX
Can get only this value from fastboot
Click to expand...
Click to collapse
Have you solved the problem?

buhar72 said:
Have you solved the problem?
Click to expand...
Click to collapse
No, i didn't solve this issue yet

Anyone can help me?