Related
Hi everyone!
Got this Miphone A3 yesterday, and I been searching like a fool after information about this damn phone but it ain't a easy thing to find.
But hey, what do you expect from a cloned iphone
So here's my question:
Anyone sitting on a Miphone and have you done anything with it, most imporant for everything, ROOTED?
Phone info on the phone:
Model number:
A8
Where I bought it, it said A3 on the site (mobino1), same on the battery.
But instead of the iPhone Ui it has the Android Ui pretty sweet that it didnt have the iPhone Ui.
Firmware:
1.5
Don't have Android Market app, but everything looks like Android, also works to install . apk apps tried to install apps from 1.6+ but doesn't work.
Kernel:
2.6.25
Build number:
Linkworld Project .0002_A.1_01r_100129
Been looking for that build number for a while now, don't have any info at all on that one.
Hope some1 here has some info, would be a blessing for me!
EDIT:
I found my way into what i think is the recovery mode, came up a where is said enter flash mode put in usb cable, with red background. Then when i did that, the screen turn blue saying "Enter Flash mode, Begin to flash image..."
Been reading a lot, and i never came up with that kind of "bootloader" just saying that
hope some1 could give me some tips
hi, one of the stores provided firmware from A3, I do not know how fresh. ussd queries are unsuccessful, after ussd calls to hang up. In flash mode turns pressing the upper side volume buttons and switch.
depositfilescom/files/0po3pwcu6 - miphone A3 rom
thanks for that one!
flashed my phone, worked! but it wasnt the same version. this one was with the iphone ui (using ahome)
Model number:
A3
Build number: A3 Project.0001_18r_100411
Seems like my 3G connection does not work with this version. ussd, unsuccessful on this version too, same with previous version.
I was wondering, tried to open the one.bin (flash image) but cannot extract it. Any way to extract the image and try to reconfigure the build?
the phone using "tavor platform" flashing software, anyone know anything about tavor platform?
still trying 2 modify the rom I have, no luck so far.
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
xift said:
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
Click to expand...
Click to collapse
I been trying to extract the .bin file MagicIso can read the file using it "missing files" but can't read the files when extracted. Trying to find a program that could read the rom file, have you done anything to update the phone? Do you have a rom file, if so could you upload it pls?
tried to get the firmware from mobino1 but they just ignore mig those bastards.
Ernest25
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
Click to expand...
Click to collapse
Do you want to flash your phone with the .bin file you already have or do you want to know how to update the phone to android 1.6+?
To flash your phone with tavor flashing software, you need to run the flash program in XP and press "volume up" and "power" on the phone to get to flash mode, then plug in the usb with the flash program open, and it automatically flash the phone.
About updating the phone to a newer version of android I have not a solution.
I been trying to, get info on the hardware so I could try to cook a own rom with at least android 2.0
Cheers
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
xift said:
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
Click to expand...
Click to collapse
Ernest25 said:
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
Click to expand...
Click to collapse
If they just told me straight up, we just sell the phone, we don't have any contact what so ever with the manufacture or developers I would accept it. But this just pissed me off.
I've been asking around on other sites that sells the phone, waiting on answers from them. Hopefully they are more friendly.
Don't downgrade, that was a mistake for me (the rom file azat182 nicely posted).
I tried something yesterday, made a own .bin file with android 2.1 but the flash program wouldn't start with it (parse ini error) so I tricked the flash program that it would flash the one.bin (azat182) rom file.
After it opened I replaced the .bin file with mine. Everything seems to work fine, did every step it should like, root system etc finished 100% when I tried to turn the phone on I couldn't, maybe it didn't know were the power "button" source came from.
The android source was made for an other phone, so I wasn't surprised.
Plugged the usb back in, and luckily the phone connected somehow with the computer so I flash it with the (azat182) rom and I'm back at square -1
but now I think, if I could find out the hardware/drivers on this damn phone it would work to cook a own rom using that method.
Cheers
Oh hey, someone else with one of these phones. I've been messing with mine for a while, started out with the A8 rom (from fastcardtech), and have flashed the A3 rom to the device. I've noticed that the gps works a lot better in the A3 rom than the A8, so it's not much of a downgrade, imo. Recently I've made some headway with an android 2.1 port to the device.
Anyway, this device isn't hard to root. If you adb into it, you can get root from the device by remounting /system as RW and pushing a fixed su binary to /system/bin, or wherever it goes, it's been a while
The MTD partitioning in the Miphone's rom is a big giant mess. The rom is split into 25 partitions, the kernel isn't in boot.img like it's supposed to be, neither are the kernel parameters.
The bootloader is dumb, it doesn't check for signed images. The A3 image and A8 image are both engineering builds.
wow you seem to know a lot about it...
does 3g work for you in the a3 rom? also gps doesn't work for me in a8... so a3 could be a possibility if 3g worked.
how did you adb your phone? I could not connect... the driver just didn't show a phone. although I changed the vendor ids etc...
could you write a short tutorial of some sort? would be nice!
if you are root, couldn't you make a backup of your firmware?
is there a downloadable a8 rom at fastcardtech?
regards, xift
I haven't been able to get 3g working, just edge. I don't think the 3g will work in the US, as none of the carriers will work with just wcdma2100, but I'm no expert on the subject. I've had reasonably good luck with the gps with an app called Maverick, but I don't have a data plan currently, so no agps. With gps alone, it takes about a minute or so in an open area to acquire a lock.
For ADB, there's a driver in the android sdk, but don't bother with it. Instead, the phone's going to show up as a rndis/ethernet gadget. For windows, drivers for this can be found at webos-internals.org/wiki/USBnet_networking_setup, just the .inf is all you'll need; MacOS and Linux will just see the ethernet gadget. Once that's installed, the phone will show up on the PC side as a network interface that will need an IP address; I've been using 169.254.231.10 and subnet 255.255.255.0. Once your network interface is configured, you should be able to run adb connect 169.254.231.168:5555, assuming you've got your android sdk tool set up already. From there, you can adb shell in and poke around. Once you get an adb shell, you'll have a root prompt, but to get 'rooted' so that other android apps can make use of it, you'll want to run adb remount to remount /system as RW, then copy a working version of su over to the phone. I think superuser whitelist comes with one.
I don't usually go to that much trouble, as I end up cycling between the A3 firmware and my Eclair build a lot, and the A3 rom is jacked up to where it's a pain to get a terminal emulator running on it. Adb from my desktop seems to get the most mileage.
Fastcardtech didn't have any useful information about recovery firmware that they had, a release date for an android 2.1 rom, information on the manufacturer, anything.
Wow thanks a lot... I tried with the sdk driver.
port 5555 seemed blocked there although it was obviously responding (took much longer than other ports). Thanks for your help - I'll try that one.
Could you upload your eclaire build?
I don't have much time at the moment because of my bachelor's thesis. But I'd like to see that and maybe I could help a bit. Although I do not have any experience with mobile devices etc.
You may need to mess with the usb debugging option. After flashing to the a3 rom, it's enabled. I remember it being the same between the a8 and a3 roms.
At some point, yeah, I'll my eclair build up. I'd like to at least get bluetooth, gsm and wifi going again before I do. I don't have a rom that you'd be able to flash currently; more like a big pile of build scripts, and install scripts for the android system and ramdisk.
yeah I understand that. You could open a google code project or something.
nice to know that there is somebody working on this.
usb debugging is enabled by default. I'll just have to try again.
thanks for your help so far.
file inf
I not have disk only cd and dvd when I will install the drive without the disk says no drive found I save the file as usbnet-pre.inf
if anyone can help me pls
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
xift said:
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
Click to expand...
Click to collapse
linux complicated for me but thank you I hope good news from you about how root this bastard mobile
I have the A3 if you're interested I can pass to you
Hello friends.
This is intended to be a thread providing up-to-date versions of ZTE ROMs, mainly for the very unsupported (so far) ZTE V71A and ZTE V11A, but if you have other requests for ZTE roms, please ask and I'll see if I can provide.
--- VDF_IT_V11AV2.0.0B02.zip (466.13 MB) http://www.multiupload.nl/E709JNIJ2H
--- FWUpgrade_Pad_CDMA_V55.zip (215.24 KB) http://www.multiupload.nl/NP6EWS6K3B
--- SPT_AM_V55V1.3.0B09.zip (193.05 MB) http://www.multiupload.nl/YTMKD922CU - NEW v55 ROM
--------------------------------------
The above files are most probably all down, and I can no longer locate new versions for them.
I can, however quote:
dclou said:
Hello All:
The phone company in Taiwan(TWN GSM) has just released the offical 4.0.4 rom zte V71A
(Taiwan mobile mypad p4 is the OEM of ZTE V71A)
http://service.taiwanmobile.com/csonline/cellphone/download.html
Just Connect to the above hyperlink and press "P4 Android 4.04 升級檔 "
Then you can download it and upgrade to 4.0.4.
Please help to update this ROM to the first page of this thread...^^
Click to expand...
Click to collapse
I'm sorry friends. I've lost access to the ZTE servers from where I procured new roms for devices.
Unless I find a different source, I can't provide any updates.
Until further notice this thread may be considered dead.
Thanks man, soo is this older or newer? http://kepfeltoltes.hu/120218/tmp_-2133757290_www.kepfeltoltes.hu_.png
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
sangemaru said:
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
Click to expand...
Click to collapse
That would be good. did you get my pm?
Zte score roms?
Sent from my X500 using xda premium
Okay, so here is a pdf for the huaweii media pad 7, of the flashing process and the unlmt.cfg needed is 0byte also , it is supposed to be the same process, dont use the files from here, its not for v71a or v11a!
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDM5NzQ=
brd912, couldn't you have just said X500 in the first place? I'll look, if I find anything I'll let you know.
zsolti, so far I've had no success with using the huawei procedure to flash our tabs, and mobilx hasn't been online today so I haven't got a clue from him about this.
The bad news is, as confirmed earlier by mobilx, the builds are IDENTICAL to what we currently have on our devices. Not encouraging at all (Verified by comparing build.prop). And we don't even know how to flash them yet...
I'm attempting to obtain a carrier unlocked nandroid backup right now, to see if it's locked at a component firmware level or at software level. Maybe we'll see some good news on that front.
Hello there,
This guide in english explains a lot. So this unlmt.cfg file actually serves as a trigger to automatik or manual update.
That means
if it is present update will start on PWR off PWR on
if it is NOT present than you need to go to the FTM mode VOL+ & PWR and update process will start
dload folder must be on ext-sd card.
Again leaked FWs for V11a are the same as ones on our devices
Sangemaru can confirm if his internal FW name on 7 inch matches with the leaked ones.
Go to yours build.prop file and check ro.build.sw_internal_version=VDF_RS_V11AV1.0.0B03 example of mine device
VDF - network - vodafone
RS - country - serbia
V11A - model - 10 inch
V1.0.0 FW version - very first
B03 - localisation ( APNs, keyboards etc) Serbian network APNs and Cyrillic keyboard
Yea, I read it.
At least for my tablet, it didn't apply. Update would not trigger, either on reboot or ftm mode, with neither UPDATA.zip or update.zip names, with the file or not, with fresh sd card format or not, development mode or not, etc.
I'm assuming it worked on your V11A, so somebody should attempt it on their own V71A's if possible. I may have messed something up, or simply have an unsupported sd card.
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
I'm assuming one thing will happen: nothing.
hei, did any of you has dialer app, it seems vodafone had removed this one
p.s. am on july rom
if there is one can some one post it
tanks
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Hi all !!!!!
I'm Italian .......
My device specs :
M8660A-AABQNLYM-3.1.32T 1 Jul 23 2011 22:00:00
Kernel version :
2.6.35.11-perf.
[email protected]#2
Build Number :
SmartTab10-MSM8260-V02d-Dec022011-Vodafone-IT
huawei media tab
sangemaru said:
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Click to expand...
Click to collapse
did notice that huawei media pad has a dialer app, however did not succed to start it.
I'm saying that in greate proportion the two tablets are just the same.
no luck
zsolti256 said:
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
Click to expand...
Click to collapse
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
caveman_78 said:
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
Click to expand...
Click to collapse
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
good news
zsolti256 said:
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
Click to expand...
Click to collapse
Wow, those are good news. I can't wait for the update. maybe after, we can try to make some weird ICS port.
Please, keep us informed...
Thanks...
i have some problem
hello i have a V71A and i wanna take back the stock rom beacuse i formated system... and a CWM is buggy and usb mass storage is doesn't work and my pc don't see the tablet just CD-rom and not more "adb devices -list of devices atthaced (and nothing)" pls help (sorry for my english)
Uninstall and reinstall usb drivers. Your problem is a driver issue. And how exactly did you format the system?
This is our first Android device: LG-AS730 – Optimus Select (for carrier Revol)
-
SCR Version: AS73010b_Revol
Software version: AS73011A
Andriod version: 4.0.4
Kernel version: 3.0.8
OUR GOAL:
Root the phone for security reasons in addition to getting rid of all the bloat and/or unwanted apps. We don’t like syncing, or the sharing and storing of our data (cloud). We do however respect open source. That said, we have never rooted, see above, “our first android device”. What is in place, if anything to accomplish our goal –without loosing functionality and/or bricking our device?
-
Our XDA search term “LG-AS730”, and “AS-730” yields no results at this point in time.
Root AS730 / Development
This method will work for the AS730.
http://forum.xda-developers.com/showthread.php?t=1886460
Be aware our phone has a locked bootloader + CRC Check, which means if you remove certain system apps, you will be greeted with a "Security Error" message on system start, resulting in a shiny new brick.
I already bricked mine, and luckily I still has a couple days left on my 15 day warranty with Revol to get a replacement ( I said it was an update gone wrong )
(After which, I found the .cab file on the LG server to hopefully restore (Haven't verified yet))
I'm currently looking into ways to remove the CRC check.
I'll be making a post soon with an attached .cab / other information on our device.
It just sucks our device has almost no documentation or development.
If anyone would like to help with development or anything, PM me.
veris said:
This method will work for the AS730.
http://forum.xda-developers.com/showthread.php?t=1886460
Be aware our phone has a locked bootloader + CRC Check, which means if you remove certain system apps, you will be greeted with a "Security Error" message on system start, resulting in a shiny new brick.
I already bricked mine, and luckily I still has a couple days left on my 15 day warranty with Revol to get a replacement ( I said it was an update gone wrong )
(After which, I found the .cab file on the LG server to hopefully restore (Haven't verified yet))
I'm currently looking into ways to remove the CRC check.
I'll be making a post soon with an attached .cab / other information on our device.
It just sucks our device has almost no documentation or development.
If anyone would like to help with development or anything, PM me.
Click to expand...
Click to collapse
Glad to see that my excuse works in other places xD. I do have a rooted System.img, just no way to flash it to the phone. (At least, I believe I still have the rooted system.img file). With our model, LG Mobile Phone Support Tool doesn't decompress a system.img.ext4 while flashing which is what caused my brick. I tried splicing back together a BIN file and literally ****ed the partitions.
??
AS_730 said:
This is our first Android device: LG-AS730 – Optimus Select (for carrier Revol)
-
SCR Version: AS73010b_Revol
Software version: AS73011A
Andriod version: 4.0.4
Kernel version: 3.0.8
OUR GOAL:
Root the phone for security reasons in addition to getting rid of all the bloat and/or unwanted apps. We don’t like syncing, or the sharing and storing of our data (cloud). We do however respect open source. That said, we have never rooted, see above, “our first android device”. What is in place, if anything to accomplish our goal –without loosing functionality and/or bricking our device?
-
Our XDA search term “LG-AS730”, and “AS-730” yields no results at this point in time.
Click to expand...
Click to collapse
Do u have the original rom
Hello all,
I have been a reader of work on here for sometime when needing help with a problem, mainly with mine and my wifes Galaxy mini due to it's low built in memory..
Anyway on to this little problem, I have been toying with the idea of rooting my china import hero h2000+ So over the weekend I started collecting information/bits towards it.
Tried the easier route with unlockroot.com free version that couldn't unlock the shells.
Then tried one from Youtube but there's was a new version (phone wise) using MTKdroidtools v237 That one went though okay and had the super user there then when you reboot it, it was gone.
Then tried, sorry can't remember the person/user but was Root_with_Restore_by_Bin4ry_v17. Press one for normal all goes though fine just nother there at the end again.
Then tried Root_with_Restore_by_Bin4ry_v18 all the same as the v17 but once rebooted and back on there's a little problem..
It seems that all the apk files have been wiped, but on closer inspection they seem like they are there after managing to install the apk for ES File Explorer so I've managed to in still other apk files to keep me going for the moment But it will not reinstall google play. as I can't get it back to 'as before'. I also noticed that the recovery mode no longer works the screen will come up as if it loading it but just turns off.
In an ideal world I would like to either get back to fully working or rooted & working, but read there a bit difficult to.
Other detail are:
Android Version 4.0.4
Baseband Version: MAUI.11AMD.W12.22.SP.V7,2012/08/20 16:49
Kernal Version: 3.0.13 [email protected] #1 SMP PREEMPT Zed Sept 19 05:06:34 EDT 2012
Build number: 120920.ICS.V13.FWVGA.CN.COM.4P4.MT6628
Also just found that it does not Reboot Recovery from about phone.
Any help or guidance would be very much appreciated :fingers-crossed:
Thanks
Anyone? please.
Good Evening All(or whatever time it may be there),
I'm new to XDA and Rooting, etc. etc. I purchased a MediaTek T906 Tablet(Made in China!!). After I received it and charged it, the first thing noticed it wasn't allowing some apps to download and install. Keep in mind this is suppose to be Android 9 and 512Gig 8Gig ram device.
Below is what MTK Droid Tool v2.5.3 says about it(and yes I Root it, am fully aware that it voids warranty):
Hardware : MT6582 (MT6797 is Fake!)
Model : T906
Build number : T906_vEN52S2_TB_20191205
Build date UTC : 20191205-085910
Android v : 9.0
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V54, 2018/01/02 15:01
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Thu Dec 5 16:56:01 CST 2019
Too root(successfully)it I used KingoRoot and Got SuperUser Status/Privileges. I did a lot of reading on root and other root apps(to be used in conjunction with). Long story short, I'm trying to get a specific app to download to this tablet and am not sure how to go about it. I did the dump data/cache thing in Play Store and Google Play Services and reboot. Didn't work. Did all the steps before I root the device. I even used Root Essentials Editor to mod the device name and manufacturer, that didn't work. And the time zone is set to right time zone. So, I'm making this post asking for some guidance and/or help on what I can do? Any and all help is greatly appreciated!!
I am in the same situation as the previous poster with the same Version, Kernel, Baseband, Build and my experience with this should be considered at a beginner's level. In researching this and came across a post that indicated that the tablet is not actually Android 9.0 but suspected to be KitKat. Please, if anyone knows how I could get this setup with Android Oreo, I would be grateful.
Hi guys,
just got the tablet too, it also seems to me it has this config:
- MT6582
- 1GB RAM
- 16GB Storage
- 1280 * 800, 7.19" display
- Android 4.4
Not sure what options there are, but I hope there are some newer Android builds that would work on this?
I'm following
So far....
I have been successful in rooting my device and hope to find a ROM that will move it up to a level that will allow KODI -Leia to be installed. I will let you know what my findings are. I'm just afraid as I don't want to brick the device.
Hi guys . Same problem. But. Works to me. Go in accounts remove account. then try loggin again.
uncheck all boxes. Unynchronize the two options in the account. Agenda and contacts. Deselect the check options. If it doesn't work restart and turn off the wifi. then rewire. Do it again. good luck
A brother in distress
I've got the exact same issue with my T906 Mediatek. I downloaded the Root app (Thanks!) and kept trying to get the things to load and run. I'm specifically having the issue with Alexa app. I can find it but I get that the app isn't compatible. It runs on my Samsung phone that's running A9.0. It keeps saying the app is already installed, yet it isn't . I went into the Play Store and Play Services apps and deleted the updates and caches as suggested on YouTube. No difference. I'm sort of at a "What Now!?" POINT.
Any help would be appreciated.
Be safe out there and for goodness sake, wear your masks until this crap is beat.
The REAL OldGeezer
you can't upgrade generic android devices until version 9. Android 9 seperates the drivers with the treble abstraction layer allowing you keep the drivers and upgrade the rest. The T906 has android 5.11. If you run CM lite scan you will see a huge Opera beta file that is always 3 times your storage. This is how they fake the RAM and ROM sizes. If you take off the back and look at the board you will ussually see printed on the board 1GB ram 16GB rom. They have also faked the CPU by using the ROM for the upspec version with better camera, screen resolution and CPU which uses the same drivers. Thus these are also falsely reported. Sadly Google no longer supports android 5 for things like Google sheets so your apps will soon stop upgrading. I love this machine because the screen size makes it cheap for 50 USD
Help to get ROM image to restore same model
I have the same model but when trying to get root access managed to brick it. I have got SP Flash working and managed to get some T906 firmware on it so I get the Mediatek logo and battery charging symbol on screen however the boot options i.e. Fastboot etc just gives an error message when selecting any of them.
I've got a development background but new to Android and scatter files but is it possible for anyone on this thread with the exact same model to help get back to a working system? I assume there is a way to back it all up using SP Flash ?
hi everyone are in the same problem boot error !!!
how to solve it I have tried in all ways but I find myself as soon as I turn it on boot error !!!! you can not even go into recovery?
Help!!!
These manufacturers need to be found and dealt with cause they are robbing customers. They are giving fake specifications. They need to be sued asap.
I got a Mediatek tablet and try put it in recovery mode and now I got black screen with blue bar with SIM and Chinese Characters. Any way to fix it
Hali! Mi lehet a probléma, hogy nem lehet rá filmet másolni számítógépről? Össze van kötve a géppel, megjelenik a fájlátvitel, és a gépen is egy belső tárhely, és az sd kártya, de amikor át akarom húzni a filmet, nem tud semmit se csinálni.
A Fordító így fordította,
Hali! Mi lehet a probléma, hogy nem lehet filmet másolni a számítógépről arra?
Hello guys.
I have a different problem with my T906. It works fine and it is fast and reliable but I had problems downloading apps from the Google Play Store. When I checked it said that the Device is not certified under the Play Protect Certification. I remembered that it came without the Google Play app and I installed from another APK store (apkmirror.com) and it installed without issues. I've tried to download another Google Play app but can't find the correct match for my version and OS (64-bit - Android 8.1).
Any help will be truly appreciated.
I've just created a dump of this tablet with flash tool, maybe you can try to revive yours
T906_191205_ForFlashtoolFromReadBack_221023-012402
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Btw I'd welcome any kind of rom that would make this device more usable