Database Info

[Q] Having problem in booting after Root Bricked

I tried to ROOT my Galaxy Core I8262 (INS)-India || using KingoPro without making a CWM/TWRP recovery.But it resulted in soft/hard bricking (confused!) my phone.And its noot geeting booted again.
In Download Mode showing the following things:
CUSTOM BINARY DOWNLOAD: YES (1 Counts)
Current Binary: Custom
SYSTEM Status: Official
I researched further and tried to flash Stock ROM again using Odin 3 And it resulted in the status in Download Mode "Current Binary: Samsung Official" but the process stucks during flashing "system.img.ext4" as showing in the Odin message box.
||Help me out||

Hi,
I will have your thread moved to your device section.
Good luck!

[Q] unable to remove soft BRICK on samsung galaxy S3 ATT

experts
I tried to custom install custom rom on my samsung galaxy S III (ATT). After several unsuccessful attempts, my phone is stuck in soft brick mode (shows Samsung Galaxy after reboot and get stuck there).
I installed custom recover mode apps (CWM, TWRP). I am unable to install custom ROMs using these apps in recover mode. I get NAND write error failed and also "No OS installed error"
When I put the phone in Download mode, the device shows the following.
ODIN MODE
PRODUCT NAME: SGH-I747
Current Binary: Custom
System Status: Custom
Qualcomm Secure boot: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 3
I am guessing Samsung is blocking custom installs. I am unable to recover the phone to samsung custom rom since I don't have recovery code from Samsung Kies. i can't get back to stock rom as there is no OS installed.
Can you suggest some ideas on how to get past the soft brick ?
-regards

[Completed] Recovery Accidentally Erased g935v s7 edge

I was rooting the phone and I accidentally erased the recovery partition on it. So i am unable to install twrp recovery to flash roms. I can't even put the phone in factory reset as the complete recovery is gone. Does anyone here know how to fix this issue? I have a Samsung Galaxy s7 edge model g935v verizon version. PS when I try to put the phone in factory recover this is what i get
Recovery Booting...
Odin Name (HIGHSPEED)
PRODUCT NAME: SM-G935V
CORRENT BINARY: Samsung Offical
SYSTEM STATUS: Custom
FAP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B4(2,1,1,1,1) K1 S3
SECURE DOWNLOAD : ENABLE
and it just stays on this screen doing nothing.

Hi !
Here is this thread , have a look
https://forum.xda-developers.com/verizon-s7-edge/how-to/firmware-verizon-s7-edge-t3344092
and here
https://forum.xda-developers.com/ve...de-flashing-sm-935u-firmware-verizon-t3415145
Good luck !

SM-J710FN with Binary 6 HELP

Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?

m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2

m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?

J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.

Combination ROM boots but not stock.

Hey all, Need your help.
My SM-J710F turned off on its own and wouldn't turn on anymore. After few tries it boots into a bootloop.
In Download Mode I get this readings:
Current Binary: Samsung Official.
System status: Custom.
FRP lock: ON
SWERV: B:6 K:1 S:2
I didn't root or installed any custom files.
To fix the issue I found out about the Combination ROM.
When I use the Combaniation rom it boots normally but when I flash the Stock rom I get the same bootloop.
I tried various guides on the internet playing with tar files and bypassing FRP but nothing worked.
I'm not new to this but I feel it's something simple I can't figure out.
Sorry if this is the wrong section for this.
Thanks in advance.

No solution to this??

same for me, I flashed combination rom then it boots up but stock rom didn't. BTW, did you fix this issue?