I was rooting the phone and I accidentally erased the recovery partition on it. So i am unable to install twrp recovery to flash roms. I can't even put the phone in factory reset as the complete recovery is gone. Does anyone here know how to fix this issue? I have a Samsung Galaxy s7 edge model g935v verizon version. PS when I try to put the phone in factory recover this is what i get
Recovery Booting...
Odin Name (HIGHSPEED)
PRODUCT NAME: SM-G935V
CORRENT BINARY: Samsung Offical
SYSTEM STATUS: Custom
FAP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B4(2,1,1,1,1) K1 S3
SECURE DOWNLOAD : ENABLE
and it just stays on this screen doing nothing.
Hi !
Here is this thread , have a look
https://forum.xda-developers.com/verizon-s7-edge/how-to/firmware-verizon-s7-edge-t3344092
and here
https://forum.xda-developers.com/ve...de-flashing-sm-935u-firmware-verizon-t3415145
Good luck !
Related
experts
I tried to custom install custom rom on my samsung galaxy S III (ATT). After several unsuccessful attempts, my phone is stuck in soft brick mode (shows Samsung Galaxy after reboot and get stuck there).
I installed custom recover mode apps (CWM, TWRP). I am unable to install custom ROMs using these apps in recover mode. I get NAND write error failed and also "No OS installed error"
When I put the phone in Download mode, the device shows the following.
ODIN MODE
PRODUCT NAME: SGH-I747
Current Binary: Custom
System Status: Custom
Qualcomm Secure boot: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 3
I am guessing Samsung is blocking custom installs. I am unable to recover the phone to samsung custom rom since I don't have recovery code from Samsung Kies. i can't get back to stock rom as there is no OS installed.
Can you suggest some ideas on how to get past the soft brick ?
-regards
I tried to root my phone, and after doing what I thought was the correct thing I am now unable to boot android. The phone has a screen saying Do Not Turn Off Target Device, and when I can get it in to odin mode usually goes back to that screen, occasionally I can get into the recovery, and I wiped partition data and cache data.
When it goes to Odin Mode it says:
Product Name: GT-I9305T
Custom Binary Download: Yes (29 Counts)
Current Binary: Custom
System Status: Offical
Knox Warranty Void: Yes
AP SWREV: A2
I believe you'd need a stock firmware flashed in order to boot.
Please post in Australian Galaxy S3 Thread so that one of the experts may be of help.
I have Galaxy S7.
I try to root the phone and put superman rom on and now the phone won't boot. I mean it's not booting at all. I try to boot in recovery mode and it shows
Recovery booting .... in blue and it goes to blue screen and it says in red custom binary blocked by secure boot (boot img) and also "system software not authorized by att has been found on your phone etc.
And when I go downloading mode it shows
Odin mode high speed
Product name smg930a
Current binary custom
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: n4 (2,1,1,1 ) k1 s3
Secure download enable
You can't flash a stock ROM from download mode with ODIN?
Well you can try to flash back a stock rom or try to recover the firmware with samsung kies 3.
I was trying to recover a file off my phone and the program install a custom rom on my phone. I tried odin install with SM-G930V_1_20170511014326_sfly98ubk8_fac method to get my sm930v back to stock and only screen that will boot is the downloading screen now. the rom will not install in odin? any assistance would be helpful information shows as followed
product: sm-g930v
Current binary: Samsung official
system state: custom
fap lock: off
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.