Hey all, Need your help.
My SM-J710F turned off on its own and wouldn't turn on anymore. After few tries it boots into a bootloop.
In Download Mode I get this readings:
Current Binary: Samsung Official.
System status: Custom.
FRP lock: ON
SWERV: B:6 K:1 S:2
I didn't root or installed any custom files.
To fix the issue I found out about the Combination ROM.
When I use the Combaniation rom it boots normally but when I flash the Stock rom I get the same bootloop.
I tried various guides on the internet playing with tar files and bypassing FRP but nothing worked.
I'm not new to this but I feel it's something simple I can't figure out.
Sorry if this is the wrong section for this.
Thanks in advance.
No solution to this??
same for me, I flashed combination rom then it boots up but stock rom didn't. BTW, did you fix this issue?
Related
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
XDA Visitor said:
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the homepage for your device:
Samsung Galaxy S6 Edge
Guides and other helpful information can be found in the General section. If you create an XDA account, you can ask for specific help here:
Galaxy S6 Edge Q&A, Help & Troubleshooting
The experts for your device are located there and can best assist you.
Good luck and welcome to XDA!
I was trying to recover a file off my phone and the program install a custom rom on my phone. I tried odin install with SM-G930V_1_20170511014326_sfly98ubk8_fac method to get my sm930v back to stock and only screen that will boot is the downloading screen now. the rom will not install in odin? any assistance would be helpful information shows as followed
product: sm-g930v
Current binary: Samsung official
system state: custom
fap lock: off
Dear xda-forum,
It seems like I bricked my "new" S7 (SM-G930F).
I wanted to root the device according to this thread. https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-root-android-8-0-oreo-t3840271
Since I didn't turn off the OEM lock, I got the FRP error.
After that, I tried to flash the Stock ROM again, however it just got stuck in a boot loop.
Device only turns on when connected to PC/Charger
Device only works in Download Mode
Device is recognised by Odin
Recovery not working
Binary FRP Lock when trying to flash TWRP
I sadly found out, that Smart Switch with it's Emergency Recovery doesn't work anymore.
Is there any possibility to unbrick my device or do i have to get a new Motherboard?
Best Regards
IJOJOI
Did you try to flash stock rom with odin?
This should be able to fix your problem
I think u need stock firmware and s7 930f pit file it will solve almost all problem related to stock rom
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Kisu1337 said:
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
hey try flashing the phone with a stck firmware and check the nand erase on odin
Kisu1337 said:
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
did you factory reset after flashing it? if not, boot into stock recovery and factory reset it.
also, the screen should NOT go black when flashing in Odin. That is peculiar and also might be part of your problem