hello !
i have sony c 2305 , i have tried to setup software on it as its software doesnt work it stops on sony logo
i used wmshua to flash it but it reaches 100% and gives a message "failed ! "
i downloaded the firmware from more than one site and the problem wasnt be solved
and i tried sony companion program and clicked "repair software" then put the phone on flash mood and it starts to download the software ,
, after downloading it on pc it gives a message
"Software repair failed.
An error occurred while repairing your device.
Please try again. If the problem persists, please contact Sony support.
Error code:UEUpdateFailed
UE_2005"
any help ?
no answers ?
Same problem here.
abdelrahmankhattab100 said:
hello !
i have sony c 2305 , i have tried to setup software on it as its software doesnt work it stops on sony logo
i used wmshua to flash it but it reaches 100% and gives a message "failed ! "
i downloaded the firmware from more than one site and the problem wasnt be solved
and i tried sony companion program and clicked "repair software" then put the phone on flash mood and it starts to download the software ,
, after downloading it on pc it gives a message
"Software repair failed.
An error occurred while repairing your device.
Please try again. If the problem persists, please contact Sony support.
Error code:UEUpdateFailed
UE_2005"
any help ?
Click to expand...
Click to collapse
I also try to install rom from sdcard but again failed.
Related
Dear members, I have a sony tipo dual. I tried to install cm10 on it, and was successful but later when i inserted the sim i came to know that CM10 doesn't support tipo dual.
Now my problem:
1. I tried to use PC Companion and go back to original Firmware but it says "Phone has modified software. It cannot be updated."
2. I tried to flash it with a Central Europe stock, but everytime i do that it throws an error and stops.
3. I am not able to copy the Gimlo firmware on the phone. Whenever i try to copy it says "Cannot copy item. The device disconnected or stopped working."
4. I tried using fastboot and install the .sin files but I was able to install only the kernel.sin. While installing the system.sin i gave an error of Too large file.
I have attached the flashtool's log
30/015/2013 19:15:04 - INFO - Unable to read from phone after having opened it.
=============================================================at this point my phone restarts
30/015/2013 19:15:04 - INFO - trying to continue anyway
Now i just want to restore this phone to its original software. The biggest mistake i did was not to keep a backup when i installed CM10.
Please help me...
Perhaps Sony Update Service. So flashing a stock kernel doesn't work? Have you unticked TA/no final verification?
Sometimes this works! Try that first and otherwise Sony Update Service.
Success, and good luck!
Sent by magic!
Hi,
I have already tried using the Update service, but i get the same error "Modified Software".
Also the most irritating things is that I am not able to copy anything on the phone when I connecct it to my pc.
I tried disabling the TA/ Final verification, but this is not helping either.
Guys plz help.... the phone restarts during the flashboot process..
Edit:
I was trying to edit the build.prop file.. If this works can I use Sony Update service to reinstall the original software?
Can anyone please share the original build.prop file for tipo dual. I dont have the original one and my current build.prop file shows the device as ST21i (Sony Tipo) whereas it should be ST21i2 (Sony Tipo Dual).
Expecting your help...
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
rannusmash said:
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
Click to expand...
Click to collapse
Download Sony PC Companion .
Connect your phone in firmware flashing mode.
it will automatically install the required drivers.
And make sure to put the firmware ftf file into the folder named 'firmwares' of flashtool.
Please press the thanks button on the bottom right corner of this post if I helped you.
rannusmash said:
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
Click to expand...
Click to collapse
Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck
Thread closed
Thank you for the replies.
My phone is working fine now. So the thread is CLOSED
Hello xda it's my first post here
Recently i tried to install on my xperia z5 android 6 by following these steps from the link below:
http ://xperiafirmware.com /8-firmware/108-sony-xperia-z3-e6553 (delete space after http)
In detail, after downloaded Android 6.0 - firmware 32.1.A.1.185 i tried to install it into phone from flashmode with flashtool as tutorial shows.
In flashtool after:
"processing system.sin
Checking header
Flashing data"
the program stacked there the green bar didn't load at all and after 6 hours passed it popes up an error message and phone's disconnected.
After that the phone is acting like video below(rebooting all the time and says "software update fail make sure your phone is connected to computer and try again" )
https ://www .youtube.com/watch?v=Ou0v0ifxzZk (delete space after https and after www)
Any suggestions what's going on ? Is there any way i can fix it?
GxMarkos said:
Hello xda it's my first post here
Recently i tried to install on my xperia z5 android 6 by following these steps from the link below:
http ://xperiafirmware.com /8-firmware/108-sony-xperia-z3-e6553 (delete space after http)
In detail, after downloaded Android 6.0 - firmware 32.1.A.1.185 i tried to install it into phone from flashmode with flashtool as tutorial shows.
In flashtool after:
"processing system.sin
Checking header
Flashing data"
the program stacked there the green bar didn't load at all and after 6 hours passed it popes up an error message and phone's disconnected.
After that the phone is acting like video below(rebooting all the time and says "software update fail make sure your phone is connected to computer and try again" )
https ://www .youtube.com/watch?v=Ou0v0ifxzZk (delete space after https and after www)
Any suggestions what's going on ? Is there any way i can fix it?
Click to expand...
Click to collapse
Your given link shows that you have installed Z3+ fw.
Try to download your model FTF and then flash it with flashtool again.
hi, i was in the same trouble before, i was sacaried with my new super expensive brick jajaja, but i found the solution, just try to flash the generic fimeware and marking all de wipe marks in flash tool, after few attempts it flash the rom and i can enter the phone, if you see the green bar doesn't began to go just desconect your phone and try it again. I solve it in my 4th atempt
PD: forget my english please, i wish it can help you.
Hi, Also got up on the same problem as yours as i've downloaded and flashed wrong FTF model for for my Z5 Dual (E6683).
Just performed the re-flash using the latest Flashtool and the correct FTF for the model, completed flashing and device has returned to normal operation.
Thanks for your help
Thanks all for your help guys rly appriciated , i solve the problem with your help thank you all
I have the exact same problem, only it won't do anything when I press the volume down and connect it to the pc. Flashtool won't detect the device. Does anybody have an idea?
Hello everyone, I hope someone can help me.
I recently unlocked the bootloader from my Xperia Xa F3111 ( I followed the official metod and everthing went smooth )
But i didn't knew that doing that I couldn't update my phone firmware anymore. ( using Xperia companion or software update option on my phone )
So i tried using sony emma. Sony says that Xperia Xa is supported but for some reason it doesn't recognise my phone.
This is what I did affter the install, I put the customization file in emmas folder, I disabled my antivirus and firewall , I run emma as administrator , pressing the volume down key I connect the phone to my pc and then while emma is trying to identify my phone im prompt whit an unknow model picker , if i scrolled down the list it isn't listed my phone model. and if i cancel the prompt it recognizes my phone but also gives me an error triangle saying no available services available to your phone and on the left panel another small triangle under status saying service execution was aborted . Any ideas please ?? Thank you
NigmatiK said:
Hello everyone, I hope someone can help me.
I recently unlocked the bootloader from my Xperia Xa F3111 ( I followed the official metod and everthing went smooth )
But i didn't knew that doing that I couldn't update my phone firmware anymore. ( using Xperia companion or software update option on my phone )
So i tried using sony emma. Sony says that Xperia Xa is supported but for some reason it doesn't recognise my phone.
This is what I did affter the install, I put the customization file in emmas folder, I disabled my antivirus and firewall , I run emma as administrator , pressing the volume down key I connect the phone to my pc and then while emma is trying to identify my phone im prompt whit an unknow model picker , if i scrolled down the list it isn't listed my phone model. and if i cancel the prompt it recognizes my phone but also gives me an error triangle saying no available services available to your phone and on the left panel another small triangle under status saying service execution was aborted . Any ideas please ?? Thank you
Click to expand...
Click to collapse
Download Flashtool to update and use the Integrated Xperifirm to find firmware updates.
http://www.flashtool.net/downloads_windows.php
Thank you very much it worked
Hi Everyone,
I have been trying to update my firmware to the New Marshmallow (Version 23.5.A.0575) from the Phone & Xperia Companion.
*When I update it from the phone it restarts the device and in the middle of the process the phone switches on and gives an error message.
*But when I update it from the Computer via Xperia Companion, it gave me the following error message after restarting the device. Error code: UEGetPhoneInfoFailure UE_1200.
Could anyone please guide me on this error.
Thank you in Advance,
Best Regards,
Shaahin