Related
Hi!
Yesterday I rooted my LG P500, then I wanted to make a backup from CWM from the phone. Now the I stucked in fastboot mode.
I have read many articles about this problem, and I could solve it, but my computer (win7 64 bit) cannot detect the phone correctly. I have tried with a lot of drivers, official ones, unofficial ones, but no connection can be made to the device.
In the device manager a single unknown device called "Android" can be found. Can anyone help me? Thanks.
Senki1988 said:
Hi!
Yesterday I rooted my LG P500, then I wanted to make a backup from CWM from the phone. Now the I stucked in fastboot mode.
I have read many articles about this problem, and I could solve it, but my computer (win7 64 bit) cannot detect the phone correctly. I have tried with a lot of drivers, official ones, unofficial ones, but no connection can be made to the device.
In the device manager a single unknown device called "Android" can be found. Can anyone help me? Thanks.
Click to expand...
Click to collapse
Fortunatelly I could unbrick the phone by using lgmdp. After I got recovery console and I could restore my rom.
Senki1988 said:
In the device manager a single unknown device called "Android" can be found. Can anyone help me? Thanks.
Click to expand...
Click to collapse
Force Windows to install the Android Single Sooner Interface by going thru the steps to manually update/install a driver.
Hello guys,
I'm novice in this forum and I need help.
I have a problem with flashtool, and I can't flash my mobile phone.
I found and installed the flash tool from Xperia blog, but it doesn't works.
When I try to flash my phone, there appear next Errors messages:
ERROR- Processing of loader.sin finished with errors.
ERROR-
ERROR- Error flashing. Aborted
ERROR- Drivers need to be installed for connected device
I'd like to flash my phone, because it is with TIM brand, and because of that I still using 4.4.2 android version.
The second reason is because there are, sometimes, some bugs... I think the best way to solve all that problems is to flash my phone.
I downloaded .tft too, it seems to be a Russian version, but I think it isn't so important.
Before starting flash process I connected my device to PC and it was recognized by PC COmpanion...
I don't know is this an important information, but I have windows 8.1 on my PC...
Now, what I have to do to make it working properly?
Thanks
Scighera78 said:
Hello guys,
I'm novice in this forum and I need help.
I have a problem with flashtool, and I can't flash my mobile phone.
I found and installed the flash tool from Xperia blog, but it doesn't works.
When I try to flash my phone, there appear next Errors messages:
ERROR- Processing of loader.sin finished with errors.
ERROR-
ERROR- Error flashing. Aborted
ERROR- Drivers need to be installed for connected device
I'd like to flash my phone, because it is with TIM brand, and because of that I still using 4.4.2 android version.
The second reason is because there are, sometimes, some bugs... I think the best way to solve all that problems is to flash my phone.
I downloaded .tft too, it seems to be a Russian version, but I think it isn't so important.
Before starting flash process I connected my device to PC and it was recognized by PC COmpanion...
I don't know is this an important information, but I have windows 8.1 on my PC...
Now, what I have to do to make it working properly?
Thanks
Click to expand...
Click to collapse
OK, we can close this topic. It doesn't matter any more.
Thanks for help. :good::good::good::good::good:
Bye
First of all, when I'm in the wrong thread, sorry!
So here I go. I guess i bricked my 1+1. Doesn't turn on, only black screen and if i push a button, it vibrates. Looked up for solutions, and found one here somewhere. It's with the recoverytool or with ColorOS.
So I tried to follow the steps. Everything works fine, in Device Manger, the phone is now recognised as Qualcom HS_USB QDloader 9008 (COM3). Til here no problems at all. Then I installed the set-up file, compatibilitymode, run as admin.
I open the recoverytool, and i scan for the device. It should appear as COM. But nothing shows up. It's weird because Windows recognises the device.
What am I doing wrong? What can help?
Thanks
gl411 said:
First of all, when I'm in the wrong thread, sorry!
So here I go. I guess i bricked my 1+1. Doesn't turn on, only black screen and if i push a button, it vibrates. Looked up for solutions, and found one here somewhere. It's with the recoverytool or with ColorOS.
So I tried to follow the steps. Everything works fine, in Device Manger, the phone is now recognised as Qualcom HS_USB QDloader 9008 (COM3). Til here no problems at all. Then I installed the set-up file, compatibilitymode, run as admin.
I open the recoverytool, and i scan for the device. It should appear as COM. But nothing shows up. It's weird because Windows recognises the device.
What am I doing wrong? What can help?
Thanks
Click to expand...
Click to collapse
Have you installed the Qualcomm driver?Its very tricky,Windows wont allow to install it easily.
Yes I did, I was able to switch to non signed in Win8 via F7 in a menu. Thats why it changed from BULK to qualcomm qd9008 on a COM port. Or cant I be sure its done propermy when the name changed?
gl411 said:
Yes I did, I was able to switch to non signed in Win8 via F7 in a menu. Thats why it changed from BULK to qualcomm qd9008 on a COM port. Or cant I be sure its done propermy when the name changed?
Click to expand...
Click to collapse
It should be the driver problem,no other choice.
maskelisuvari said:
It should be the driver problem,no other choice.
Click to expand...
Click to collapse
The easiest way for unbricking oneplus (yes, I tried it): http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136
ColourOS firmware has all needed files for proper flashnig, including right tool for doing that.
Only thing that didnt work on my Win 8.1 x64 was drivers mentioned in post above.
I had to use this QHSUSB_DLOAD drivers from member DallasCZ (that I used for unbricking ZTE v9180). Only with that drivers my Windows recognized bricked phone and Flash tool could find and flash it.
Flash tool in only on chinese, that is a bit problem, but instructions given in post I linked are more/less usefull.
This is a link to DallasCZ shared folder with qhsusb drivers:
https://drive.google.com/folderview...&usp=sharing&tid=0B1T7tp6tJ_3kQkZSWjNsazJZbGc
If you are sure the driver is okay,plug in the usb cable and out and in,until you see the green line on the tool.Also you can follow the guide as in below link:
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
The same thing but this time you can flash CM11s instead of ColorOs.Also there is a video.Pls check it.
Ok so I did the process over and over again, the sixth computer did it right! I was back on ColorOS and now back to CM11S.
This thread can be closed, thanks for the help!
No problem,glad to hear you solved the problem
I have bricked my xperia xz dual (f8332) during ota upgrade and oem is locked. Now I can't flash ftf with flashtool it ends with .Sin file errors and when i use emma it show that device is locked when i use xperia companion to software repair it ends after a bit with "software repair error" Plz someone help me
are the drivers installed correctly? i can only figure your computer doesn't recognize your xz correctly because of missing/bad drivers but that's just a guess. maybe try reinstalling the drivers and if that doesn't work it might be better to include the flashtool logs to see which exact error it gives you
try plugging straight into the motherboard(from back panel).had the same error a while back
Magic-Fabi said:
are the drivers installed correctly? i can only figure your computer doesn't recognize your xz correctly because of missing/bad drivers but that's just a guess. maybe try reinstalling the
ok i will share
Click to expand...
Click to collapse
Magic-Fabi said:
are the drivers installed correctly? i can only figure your computer doesn't recognize your xz correctly because of missing/bad drivers but that's just a guess. maybe try reinstalling the
how to install this driver zip???
Click to expand...
Click to collapse
extracting the zip file, right-clicking "sa0115adb" (eventually with .inf at the end) and pressing install should do the trick. otherwise try to connect the device directly to the mainboard (assuming you use a desktop pc and not a notebook) as proposed by @josephnero by plugging the cord into a usb port on the backside of your computer. then try again using flashtool and, when aborting with errors, post the output here so we can hopefully figure out the cause of your problem
josephnero said:
try plugging straight into the motherboard(from back panel).had the same error a while back
Click to expand...
Click to collapse
i plugged straight into motherboard it showed me the correct error that the drivers r not correctly installed
i re-installed the driver and done
Thanks to both of you....
really thanks
@awadnisar
Np. Glad we could be of service. This is what xda is about
Done...
Hi all,
I am have bricked my device, its in fastboot mode but wont do anything anymore.
Ive tried literally everything possible, ive read numerous manuals, seen tons of video tutorials but nothing works.
The main issue I am facing now is that MSMDownloader tool does not recognize my phone because of an Driver issue.
However, whatever I am doing I cant get the correct driver to function on my Windows 10 machine.
Whatever I do, it either does not recognize the device, or shows it as Kedacom USB Device / Android Bootloader Interface.
I have manually removed the drivers from the device manager as well as removing them manually with pnputils, it does remove the driver and then shows it as Android Device.
If i then scan the folders (whole windows is in testing mode like many manuals tell me to) it just wont install the driver and if i do that manually using pnputils it changes nothing.
The only moment it changes is when I connect to the internet and search for a driver and the old samer driver will be installed.
I have tried the OnePlus driver installer, I have tried the All In One tool, I tried the Qualcomm QDLoader HS USB Driver, I tried it totally disconnected, i rechecked if i was running cmd and the msmdownload tool as administrator, i have rebooted and updated my pc, rebooted and tried again.
I am pretty sure its an driver issue, but apparently whatever I do i cant seem to be able to fix it, and another way of fixing this phone is probably not gonna work as whatever I do with the volume, power buttons, how many times i reboot i just keep getting the same Fastboot/Download screen.
Does anyone have any other idea, am i missing something? I really have no idea. I have followed several manuals step by step, googled and found people with similar issues tried those solutions, i am now busy for like over 12 hours and am really getting the idea that i cant fix it
This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.
schorrie said:
This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.
Click to expand...
Click to collapse
THREAD CLOSED on request of OP!