Database Info

Oneplus One hard brick

first sry for my bad englich and open a new thread
i did this instruction:
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
step by step to unbrick my OPO but did not work :/
i installed the driver ok Qualcom HS - USB QDLoader 9008
but when i start Msm8974.exe tool One PC cant read the Phone and the other when i press start writes xxxSaharaxxx and don't load any files to my OPO
pls need help thx :/

By now I hope you have solved your problem. I had a similar problem yesterday with my phone. I was on a Window 7 computer and I tried everything. Somehow the system insisted my phone was a serial device instead of a USB device. I tried everything I could think of. I eventually gave up and put it on an XP box and was able to then finish the job of un-bricking it. Make sure your device is properly registered with the computer you are using. Good luck.
Kirlus said:
first sry for my bad englich and open a new thread
i did this instruction:
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
step by step to unbrick my OPO but did not work :/
i installed the driver ok Qualcom HS - USB QDLoader 9008
but when i start Msm8974.exe tool One PC cant read the Phone and the other when i press start writes xxxSaharaxxx and don't load any files to my OPO
pls need help thx :/
Click to expand...
Click to collapse

Oneplus One unbrick issue?

Hi Guys,
Im new to the forums so i hope this is the right place for this post
I have a hardbricked oneplus one 64GB.
I have read and followed mutiple guides here and on youtube on how ot unbrick it.
But in every guide i followed mine "failed" at the same step.
When i start the "oneplus one recovery tool" or Msm8974DownloadTool this happens; (cant seem to use a link so ill try to explain it).
It starts with one green bar, when that is finished it stops an i hear the disconnected device sound.
I am currently on Win 10 but i also tried it on WinXP since mutiple posts suggested hat it would work better, but that also didnt help.
I also tried diffrent drivers (oneplus driver from the color zip), google multi driver, qualcomm driver etc.
Hope someone can help

Tiic said:
Hi Guys,
Im new to the forums so i hope this is the right place for this post
I have a hardbricked oneplus one 64GB.
I have read and followed mutiple guides here and on youtube on how ot unbrick it.
But in every guide i followed mine "failed" at the same step.
When i start the "oneplus one recovery tool" or Msm8974DownloadTool this happens; (cant seem to use a link so ill try to explain it).
It starts with one green bar, when that is finished it stops an i hear the disconnected device sound.
I am currently on Win 10 but i also tried it on WinXP since mutiple posts suggested hat it would work better, but that also didnt help.
I also tried diffrent drivers (oneplus driver from the color zip), google multi driver, qualcomm driver etc.
Hope someone can help
Click to expand...
Click to collapse
How your device got bricked?
Which recovery tool you tried?

Mr.Ak said:
How your device got bricked?
Which recovery tool you tried?
Click to expand...
Click to collapse
I don't have all the info since i got the phone from a "friend" who was about to throw it out, but ill do my best to provide accurate info
According to the privious owner the flashing of a custom rom or recovery went wrong and it ended up in it's current state.
The recovery tools i tried are;
- Oneplus one recovery tool by; Zyxxeil
- Oneplus one toolkit 1.5 by Manudroid19
- Msm8974DownloadTool

Tiic said:
I don't have all the info since i got the phone from a "friend" who was about to throw it out, but ill do my best to provide accurate info
According to the privious owner the flashing of a custom rom or recovery went wrong and it ended up in it's current state.
The recovery tools i tried are;
- Oneplus one recovery tool by; Zyxxeil
- Oneplus one toolkit 1.5 by Manudroid19
- Msm8974DownloadTool
Click to expand...
Click to collapse
Use the one with cm11s by Zyxxeil.Use Xp and use Qualcomm drivers,as this tool doesn't use fast boot/adb drivers and instead uses USB debugging port.
It need a few tries before device getting detected.
Make sure the device is getting recognized as "Qhs_bulk" or "Qualcomm diagnostics 9006" or some thing like that then install drivers manually.Also try different ports and refresh the toolkit. Open the toolkit with administrator rights.
Hope this helps

Mr.Ak said:
Use the one with cm11s by Zyxxeil.Use Xp and use Qualcomm drivers,as this tool doesn't use fast boot/adb drivers and instead uses USB debugging port.
It need a few tries before device getting detected.
Make sure the device is getting recognized as "Qhs_bulk" or "Qualcomm diagnostics 9006" or some thing like that then install drivers manually.Also try different ports and refresh the toolkit. Open the toolkit with administrator rights.
Hope this helps
Click to expand...
Click to collapse
I'm on windows xp now.
Made a clean install to be sure.
Phone is connected as Qualcomm HS-USB QDLoader 9008
The Zyxxeil tool recognizes it as a com port.
When i press start, it starts flashing 8974_msimage.mbn
When it finishes it just does the same. It looks like it's stuck on a loop at flashing 8974_msimage.mbn
I would post some pictures but i can't since im a new user
Edit; It is the same as this guy; youtube (dot) com/watch?v=TOw3-yX57jM

Flashing 8974_msimage.mbn nin a loop.... you're not the only one with this problem. I couldn't find a solution to this problem so far. Have tried fresh installs of Windows XP and Windows 7 and drivers installed in Test Mode without success. Please report back once you could figure out what's wrong.

Tiic said:
I'm on windows xp now.
Made a clean install to be sure.
Phone is connected as Qualcomm HS-USB QDLoader 9008
The Zyxxeil tool recognizes it as a com port.
When i press start, it starts flashing 8974_msimage.mbn
When it finishes it just does the same. It looks like it's stuck on a loop at flashing 8974_msimage.mbn
I would post some pictures but i can't since im a new user
Edit; It is the same as this guy; youtube (dot) com/watch?v=TOw3-yX57jM
Click to expand...
Click to collapse
Got it,it's because of a bad download or corrupt zip perhaps.Redownload the toolkit and also try with Color Os toolkit too.
If your device is recognized then there's no way you can't bring it back to life.

Mr.Ak said:
Got it,it's because of a bad download or corrupt zip perhaps.Redownload the toolkit and also try with Color Os toolkit too.
If your device is recognized then there's no way you can't bring it back to life.
Click to expand...
Click to collapse
Just redownloaded the tools and tried again.
Still the same issue, i also tried the color os toolkit like you suggested.

I have the same issue too, keep installing 8974_msimage.mbn again and again.

I'm still open for sugestions since the issue is still there

Right click msm tool, and RUN AS ADMINISTRATOR.
Problem solved.

kthejoker20 said:
Right click msm tool, and RUN AS ADMINISTRATOR.
Problem solved.
Click to expand...
Click to collapse
Although it is correct that you must run it as admin, this isn't the issue at all. There are phones that appear to be broken beyond the point where you can fix it with software.

MrBrainstorm said:
Although it is correct that you must run it as admin, this isn't the issue at all..
Click to expand...
Click to collapse
Yep, i always run tools like this as admin, the issue is something else in this case, but i wouldn't know what exactly

I may have found a solution/work-around to the problem described (in case anyone's still trying to unbrick a OPO after all this time). I must warn, however, that I really have no idea what I'm doing as I'm new to all of this, and have blundered through with no real understanding of what's going on, so pay heed at your own risk. It uses Qualcomm's QFIL program and Zyxxeil's OPO unbricking tool. I want give detail in describing the steps involved, so this will be fairly long.
***background***
My 64GB OPO has for the past couple of months almost always failed to get past the first 6-7 seconds of booting, and powered off before reaching the Cyanogen animation. It did the same when booting into fastboot and recovery, and at some point it stopped being able to access recovery at all. Very rarely it would boot, but pressing the power button while it was on would cause it to crash a few seconds later. I discovered that it would consistently boot properly if volume up were tapped while holding down the power button before it vibrates and the OnePlus logo appears, but this fix simply stopped working recently, and so it became impossible to turn the OPO on. Before giving up on it, I decided it would be worth trying the hard unbricking tool based on the ColorOS installer by Zyxxeil. However, I had the problem where the tool continually repeats the step of flashing 8974_msimage.mbn without progressing any further, to which nobody ever seemed to find a solution. I may have found a way to get around the problem, however.
Even though the procedure seems to have worked, the phone still shuts down after a few seconds as it did before (so I suspect my device has a hardware problem, possibly with the power button, and there's nothing that can be done for it). This means that I can't confirm that the fix actually works, but only that it appears to have worked. What it did was:
1) unbricked the phone - it probably wasn't even bricked before, but it definitely was after the installer hung on 8974_msimage.mbn ; it wouldn't respond to the power button at all afterwards. Applying the workaround allowed it to show signs of life again.
2) installed the COS11 fastboot. I'm not sure and can't tell whether the rest of the OS is there or intact, but the fastboot logo has changed from the newer small one to the bigger one from older versions.
***the problem***
The standard method for dealing with a hard-bricked OPO is to use the ColorOS tool as described in the "[GUIDE] [UNBRICK] Unbrick Oneplus One" thread and then flash Cyanogen, or to use Zyxxeil's tool which goes straight there. A common issue in both is that after pressing start, the tools repeat the step of flashing 8974_msimage.mbn , seemingly disconnecting the phone each time, and never progressing beyond that. This happened to me as well. This will happen if the tool is not run as an administrator, but for some people the same problem is seen even if it's run as an administrator. To the best of my knowledge, nobody has posted a solution to this problem, but some have suggested using alternative methods such as using QFIL (which I have gotten to work) or MiFlash.
***potential solution***
From what I understand, QFIL does the same thing as the unbricking tool, only not automatically. I directed it to use the files provided by Zyxxeil's tool, and it was then able to do something that unbricked the device as described above. This is what I did: (all on Windows 10, *not* using the original cable)
Required files:
1) Obtain the Qualcomm QDLoader driver. I used the the Qualcomm HS-USB QDLoader 9008 2.1.0.5 x64 driver from Zyxxeil's tool's thread (page 5, #48).
2) Download Zyxxeil's tool. I used the 64GB version. Extract DRIVER.iso and run setup.exe as described. I'm not sure whether this actually did anything and presume manually installing the driver in 1) overrides this, but I'm including this for completeness.
3) Download QFIL version 1.0.0.2 . I originally used 2.0.0.5 , but this did not work (it produced the error "unable to read packet header. only read 0 bytes", to which the recommended solution was to use an older version). This can be run from the extracted folder. Open it once, and then close it again - it seems not to behave properly the first time it is run.
Preparation:
4) Create a new folder, for instance on the desktop, and give it a short name. Copy and paste (or just move) the contents of the "OnePlusRestoreTool" folder from Zyxxeil's tool into here. This step is because QFIL supposedly doesn't like long folder names or locations (I'm not sure whether this is true or not but there's no harm in making sure).
5) Install the QDloader driver: (the PC may need to be disconnected from the internet for this stage, I think Windows may try to automatically download and install incorrect drivers)
>Open device manager, then plug the OPO into the computer. It should come up after a few seconds under "Ports (COM & LPT)" as something like QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Mine originally showed up as "Quectel QDLoader 9008". If it comes up as a malfunctioned device ("Unknown USB Device") under "Universal Serial Bus controllers", try holding the power button on the OPO down for a few seconds, or holding it down for a few seconds at the same time as volume up. If it's still not recognised, try rebooting the PC and repeating this step.
>Right click on the device as it appears in device manager, select "Uninstall device", tick the box saying "Delete the driver software for this device", and click on "Uninstall".
>The OPO will disappear from device manager. Unplug and then replug it into the PC, and after a few seconds it should be recognised again, perhaps as "Unknown USB Device" again, requiring the same procedure as above. It should now show up as QHSUSB_BULK under "Ports (COM & LPT)"
>Right click on the device and select "Update driver", then "Browse my computer for driver software". Paste in the file path for the folder containing the driver as downloaded above, which will be called "20561190_ed08f7139a2028da454a6668162f44ac311facc0" if using the driver specified above. Ensure "Include subfolders" is ticked, and click on Next. This should install the driver, and because it's signed, it shouldn't present problems often encountered in this stage. Your device should now be called "Qualcomm HS-USB QDLoader 9008", with (COM#) after it.
Fix:
6) Restart the PC, leaving the phone plugged in. Open device manager again. At this point, if it is detected as a malfunctioned "Unknown USB Device", do not try to remedy it as described above - leave it as it is. This is exactly what happened in my case.
7) Run QFIL.exe as an administrator. I don't know whether this is actually necessary to run as an administrator, but seeing as problems arise in the normal methods from not doing so, it seems sensible. If the device is listed as "Unknown USB Device", then QFIL should say "No Port Available".
8) In QFIL, click on "Browse" in the "select programmer" section. Navigate to the folder where the contents of Zyxxeil's tool were copied/moved to, and open "prog_emmc_firehose_8979.mbn". Lower down, click on "Load XML", which should give you three files to choose from. As I couldn't fully boot my OPO afterwards I don't know which one is most appropriate, but I have tried the procedure with each and it worked for all of them. Perhaps start with rawprogram_unsparse.xml and if that doesn't work try the other two. Click Open, then select patch0.xml , then click Open again.
9) Paying attention to the QFIL window, hold down power+volume up until the text changes from "No Port Available" to "Qualcomm HS-USB QDLoader 9008 (COM#). Incidentally, this will also cause the device to change from "Unrecognised USB Device" to "Qualcomm HS-USB QDLoader 9008 (COM#)" in device manager. I believe that this step starts "Qualcomm's debugging mode" as explained in Zyxxeil's thread, and this is necessary for the process to work.
10) Click on "Download" (below "Load XML"). QFIL should do its thing, and if nothing has gone wrong the phone might be unbricked at the end of the process. Disconnect from the PC and see if it works.
In my experience, where this step did not work it gave one of two errors:
"unable to read packet header. only read 0 bytes" - this happens on the newer version of QFIL, which is why I used the older one.
"unable to download flash programmer using sahara protocol" - this was the troublesome one. I believe it means that the phone is not in Qualcomm's debugging mode. This would probably be the case if, for whatever reason, the PC recognised the phone immediately as Qualcomm HS-USB QDLoader 9008, and so it wasn't necessary to hold power+volume up for the PC to recognise it properly. In my case the program ran properly the first time but was interrupted because I hadn't transferred all of the right files to the target folder. After I had done this and tried again, it gave this error. I fixed this by holding down power+volume up, while the device was recognised, until the PC made a sound indicating something had been plugged in. The next attempt to download was successful.
If the procedure doesn't work properly, it might also be worth using one of the other two XML files mentioned in step 9.
*** ***
Anyway, after hours of searching and trial and error, this unbricked the phone, with it becoming responsive once more to button presses, despite still having the original problem of powering down during boot. It seems to have the CM11 fastboot as expected, and I was able to have my PC recognise it in the short time it stays on using fastboot devices. Other than that, I'm afraid I don't know how successful this was, or how successful it would be for other people. I hope this is useful nonetheless!

hi follow this guide https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

Bricked OP7P USB Issues

Hi all,
I am have bricked my device, its in fastboot mode but wont do anything anymore.
Ive tried literally everything possible, ive read numerous manuals, seen tons of video tutorials but nothing works.
The main issue I am facing now is that MSMDownloader tool does not recognize my phone because of an Driver issue.
However, whatever I am doing I cant get the correct driver to function on my Windows 10 machine.
Whatever I do, it either does not recognize the device, or shows it as Kedacom USB Device / Android Bootloader Interface.
I have manually removed the drivers from the device manager as well as removing them manually with pnputils, it does remove the driver and then shows it as Android Device.
If i then scan the folders (whole windows is in testing mode like many manuals tell me to) it just wont install the driver and if i do that manually using pnputils it changes nothing.
The only moment it changes is when I connect to the internet and search for a driver and the old samer driver will be installed.
I have tried the OnePlus driver installer, I have tried the All In One tool, I tried the Qualcomm QDLoader HS USB Driver, I tried it totally disconnected, i rechecked if i was running cmd and the msmdownload tool as administrator, i have rebooted and updated my pc, rebooted and tried again.
I am pretty sure its an driver issue, but apparently whatever I do i cant seem to be able to fix it, and another way of fixing this phone is probably not gonna work as whatever I do with the volume, power buttons, how many times i reboot i just keep getting the same Fastboot/Download screen.
Does anyone have any other idea, am i missing something? I really have no idea. I have followed several manuals step by step, googled and found people with similar issues tried those solutions, i am now busy for like over 12 hours and am really getting the idea that i cant fix it

This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.

schorrie said:
This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.
Click to expand...
Click to collapse
THREAD CLOSED on request of OP!

T-Mobile OnePlus -- Hard (HARD) Brick

Sorry for lack of details, but I'm not sure it will help anyway. Feeling pretty bad right now.
T-Mobile Oneplus 7 Pro. 256GB version.
I wanted to go to stock OxygenOS after buying the branded version two weeks ago.
I successfully got T-Mobile to unlock my SIM, and got OnePlus to send me unlock code for my bootloader after a week.
Successfully unlocked via fastboot. Tried several times to flash TWRP and no success using fastboot.
Tried MSM-Downloader from guacamole_21_O.07_190512_repack and successfully held volume both buttons to connect to the PC. MSM-Downloader said it was successfully connected.
I cannot find the exact error message I got from MSM-Downloader, but it said it didn't match plus another error message. At that point, my heart sank.
USB Device Not Recognized keeps popping up on windows again and again, while the connect sound plays. Doesn't matter if I hold down the volume buttons or not.
Can't get into qualcomm EDL mode. My guess is I hosed my boot and now it restarts endlessly when connected to anything at all.
Is this the end of my journey? I did tons of research on the best phone and the best deals available to save money, but looks like I played myself here with lack of caution.

I would suggest following this guide to attempt reflashing of the international firmware (use the androidfilehost download).
If that also fails, you could always just reflash the TMO firmware with this guide.

bmg1001 said:
I would suggest following this guide to attempt reflashing of the international firmware (use the androidfilehost download).
If that also fails, you could always just reflash the TMO firmware with this guide.
Click to expand...
Click to collapse
I cannot get into EDL. Regardless of what buttons I press (I am holding both volume buttons down in excess of 5 seconds) when connecting USB to the phone, Windows makes the "connect" sound endlessly and the driver isn't recognized.
If I can get into EDL, I will definitely try the above.

Do you have the proper drivers installed to use EDL mode?
Also, if you go into the Device Manager, do you see the phone in there? Should pop up as something like "Qualcomm HS-USB 9008" or some variant of that.

bmg1001 said:
Do you have the proper URL installed to use EDL mode?
Also, if you go into the Device Manager, do you see the phone in there? Should pop up as something like "Qualcomm HS-USB 9008" or some variant of that.
Click to expand...
Click to collapse
Ok. I may be making progress thanks to your help but do have some hurdles I can see.
I do see the device when I hook it up to another computer. It shows up as Unknown USB Device (Device Descriptor Request Failed).
When I go to device manager to manually update the driver, and browse to the location I extracted the CAB file into, I see lots of devices to choose from, but the Qualcomm driver cab file list does not show "Qualcomm HS-USB QDLoader 9008" as an option. I see many Qualcomm USB Composite Devices in the list but none I have chosen seem to work (install fails).

Hmm. I know it may be an obvious question, but just to be sure, you're using the cable that came with the device correct?

bmg1001 said:
Hmm. I know it may be an obvious question, but just to be sure, you're using the cable that came with the device correct?
Click to expand...
Click to collapse
Yes, that is correct. Same cable i used to get into fastboot, etc... The original PC I caused the problems with recognized the device differently (showed up as a Qualcomm device) when I got into EDL with it before.
Edit: First event when plugging it into this second PC under device properties:
Device USB\VID_0000&PID_0002\5&3c8d678&0&2 was not migrated due to partial or ambiguous match.
Last Device Instance Id: USB\VID_0000&PID_0000\5&1AE39384&0&2
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF000
Present: false
Status: 0xC0000719

I just did some googling and found this article. Perhaps you can try the drivers in this guide? They are .exe files so they should be easy to install, but I'm not sure if the other drivers I provided have any OnePlus specific stuff in it, but it's worth a shot.

bmg1001 said:
I just did some googling and found this article. Perhaps you can try the drivers in this guide? They are .exe files so they should be easy to install, but I'm not sure if the other drivers I provided have any OnePlus specific stuff in it, but it's worth a shot.
Click to expand...
Click to collapse
I've already tried the .zip version with no success. I am loath to install an .exe file (don't want to make the problem worse by infecting my PC) but may as well. I will restart and report back. Thank you again for your attention.
If this doesn't bear fruit, I may be SOL, correct?

unluckyoneplus7pro said:
I've already tried the .zip version with no success. I am loath to install an .exe file (don't want to make the problem worse by infecting my PC) but may as well. I will restart and report back. Thank you again for your attention.
If this doesn't bear fruit, I may be SOL, correct?
Click to expand...
Click to collapse
Mmm. The link I gave seems to have been blocked by XDA when I tried to access it from my post. Never had a problem myself with that site, but who knows.
You should be able to ultimately recover the phone though. Perhaps asking in one of the unbrick threads? OnePlus phones are theoretically unbrickable because we have good access to our EDL mode.

bmg1001 said:
Mmm. The link I gave seems to have been blocked by XDA when I tried to access it from my post. Never had a problem myself with that site, but who knows.
You should be able to ultimately recover the phone though. Perhaps asking in one of the unbrick threads? OnePlus phones are theoretically unbrickable because we have good access to our EDL mode.
Click to expand...
Click to collapse
I'll try there next. Can't seem to get any of my windows machines to recognize the thing.

bmg1001 said:
Mmm. The link I gave seems to have been blocked by XDA when I tried to access it from my post. Never had a problem myself with that site, but who knows.
You should be able to ultimately recover the phone though. Perhaps asking in one of the unbrick threads? OnePlus phones are theoretically unbrickable because we have good access to our EDL mode.
Click to expand...
Click to collapse
OK! I found on reddit that if you hold your vol up + down + power for 30 seconds, it will boot back into fastboot, which it did! Holy **** I'm so happy. Haven't even seen if the PC recognizes it but will check now. If it does, I just need to not screw up the conversion to international.
Thank you for your "unbrickable" comment. That gave me hope to not give up.

unluckyoneplus7pro said:
OK! I found on reddit that if you hold your vol up + down + power for 30 seconds, it will boot back into fastboot, which it did! Holy **** I'm so happy. Haven't even seen if the PC recognizes it but will check now. If it does, I just need to not screw up the conversion to international.
Thank you for your "unbrickable" comment. That gave me hope to not give up.
Click to expand...
Click to collapse
I just wanted to share a tip. After you load the msmtool and before you connect your phone with the cable, click the start button, the message will read "waiting for device". Then, as soon as you plug in the cable while holding the p-up and p-down, the msmtool will automatically start. No more rushing to hit the start button before EDL mode times out.

razorshiv said:
I just wanted to share a tip. After you load the msmtool and before you connect your phone with the cable, click the start button, the message will read "waiting for device". Then, as soon as you plug in the cable while holding the p-up and p-down, the msmtool will automatically start. No more rushing to hit the start button before EDL mode times out.
Click to expand...
Click to collapse
That's pretty cool. Makes the whole process much less stressful.
Got it up and running with international version. Now to see if I can get LOS installed. My sincere thanks to all and apologies for crapping up the board with my panic. I thought I had really screwed up, but it appears it was just stuck in EDL mode and needed a hard (HARD) reset.

Hey man, thanks for the donation. Glad you were able to get your phone up and running!

Holy Sh*t man. I know 5 bucks ain't much but I wanted to thank you so much. I thought I was fukd

help !. Bricked OP8 t-mobile unlocked

Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks

kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks

kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !

solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF

JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.

Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.

JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......

kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha

JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/

kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you

kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.

kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol

JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.

kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!

JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol

I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com