Hey guys, I think my phone is hard-bricked,
The problem started when I rebooted my phone. It didn't get stuck in bootloop but just showed the black and white Alcatel Onetouch text. I noticed it was getting stuck, so I tried to go into recovery mode. The screen just went black after that.
Here are the problems:
Pressing the power button and any other button combinations does NOTHING. There are no screen flickers, logo pop-ups, battery symbol, download/recovery mode text. NOTHING.
My PC won't recognize my dead phone after plugging it into all USB ports. Mobile Upgrade Q doesn't recognize it. ADB doesn't recognize it. Windroid Toolkit doesn't recognize it. My PC just tells me that it detects a USB device, and that it may not be working properly. The files on my phone can't be viewed.
The LED indicator still works when I plug it in via USB. I've been told that only the screen may be dead, but I want to exhaust all software options first before I try replacing the screen.
My phone isn't rooted and it's running Android Lollipop. The battery was at 51% when I rebooted my phone. Before I rebooted my phone, I was just updating my apps and browsing Reddit. However, I went to sleep while my apps were updating and checked my phone when I woke up to see that Instagram was still updating, even though it was stuck at "8 minutes left" since before I went to bed. I also noticed that my OpenCamera and the stock camera app didn't work because they both claimed another app was using it. That's when I decided to reboot my phone. So, what can I do now?
ummm bump??
Update:
Mobile Upgrade Q recognizes my phone, BUT it stops at "Read terminal information failed. Check the phone status".
Device manager shows that it recognizes my phone as a Qualcomm device only.
Long pressing the power button for about 30 seconds does something. I'm not sure how, but that's how I got my PC to recognize my phone as "Android HS-USB QDLoader 9008" on the Ports part of the device manager.
Pressing the power button, volume up and down button does something too. My PC makes a USB disconnect sound when I press any button combo for a reaaally long time.
I tried the Panasonic Eluga software too but it stops at 2% with "Load NPRG Error. (Error Code = 5002)".
Still nothing showing up on the screen when I press literally any buttons. White LED still turns on whenever I plug my phone to my PC/power outlet. My phone heats up a bit too so I know it's charging at least.
Try using Mobile Q Upgrade in WinXP, i got same problem phone not recognised in Win7. Good luck.
I had this problem -my pc (Win 7)would not recognize the idol 3 as a phone.
I installed Alcatel Smart Suite for the Idol 3
http://www.alcatel-mobile.com/cari/s...martsuite/list
After that my pc finally recognized the Idol 3 as a phone. I don't know if installing smart suite was the reason. I never actually used smart suite.
Boas, primeiro utilize o ; Mobile Upgrade Q 5.0.0 da alcatel, ligue o aparelho, ligue-o ao carregador ligue os fones , carregue nos botões ; ligar e nos dois do som
ao mesmo tempo 20 s + - vai aparecer outra imagem no visor. clique (longo) em + (som) a tela apaga e fica aceso a luz do carregador. Desligue do carregador e insira o cabo
no PC, faça correr o programa, Mobile Upgrade Q 5.0.0 neste momento o programa ja não vai dar erro , quando o programa de Mobile Upgrade, finalizar vai ter o problema resolvido
"ESPERO"
No meu teste só assim o pc reconheceu ; Android HS-USB QDLoader 9008.
Related
Everything I've done as need sp flashtoolem, at the end of the show, a green check mark.
I disconnected the phone, try on and a button. Nothing responds to the charger, USB cable, or turning on Power.
After connecting the computer it does not detect it. Only when I press the volume down without batteries -It then begins installing drivers but every now and then connects to and disconnects the wilderness as a button hangs up pretty. On the Windows7 installs drivers and any Alcatel is device manager tab network adapters.
Under Windows XP, as the same thing I'll do is I choose the drivers and install mtk usb driver or something like that.If I hold the button volume down sees it but every now and then hangs up and connects. Turn on the SP flash rom going and what I did not press does not react, just as without battery and vol -, the program reacts goes red bar and pops up an error
bromine error s_ft_enable_dram_fail (4032)
I tried this rom with Jiayu Poland and pulled like Stocka F1WW-20140714-200639 -PC-update-foreign language
Previously , he was compiling 20150426 ,Nowhere can I find such romu
So much is happening with the phone. More I can not demented and I do not want him quite a blow.
ps. sorry for my English
No one can help? Where to find this rom?
hi
today i reflashed the cm boots everything a'|nd i forgot to install camera mod and i go to power off and then i tried to power on but doesn't the battery was at 80% i connected to charger but the led diode on ,nothing,i tried to pc but tells me usb device not recognized i tried to install the drivers on my win10 but doesn't works driver in win10....
can someone help me ,please...
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
raptax said:
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
Click to expand...
Click to collapse
but everything worked fine+ mine has been rooted,detects like usb device not recognized
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
raptax said:
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
Click to expand...
Click to collapse
i downloaded the drivers but doesn't install it....,and detect like usb device not recognized..
i tried,installed the drivers,but nothing usb device is not recognized
Solved i Hard resetted and Works..................
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Arwinne1 said:
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Click to expand...
Click to collapse
i think the same,i solved...,i wait for about 10 hrs and press power on button and volume up and the phone started up...
so i had back the same problem turn off by twrp but doesn't won't to power on+ my power button not work..i opend the phone remove the battery and again turn but doesn't works..led works...but on pc usb device not recognized
so today my pc has recognized my device like Qualcomm HS-USB QDLoader 9008 (COM3) can anyone help me?
Use the Mobile upgrade to reset the phone ! This is like me but now the Mobile upgrade can't restore my phone !
the mobile upgrade doesn't work with macedonian models/....
edit:repaired with downlaod mode and panasonic firmware i will write guide
I have an moto c plus 4g xt1725 with android 7.0 and 4k
My phone dont turn on, stuck on bootloader, the recovery works well but my pc dont detect my phone
Already installed al drivers, updated sp flash tool, i dont know what more i need to do
Already tryied connect without battery, with it, pressing vol+, vol-, vo+ + vol-, all buttons
please help!
i buyed and new usb cable and with it dont work too
Help please
Moto g7 power XT1955-2 EDL Mode PINOUT (Emergency Download Mode) by Shorting 2 Pin Method
does anyone know how to do that?
My smartphone is briked, I can't even enter fastboot mode, and the PC doesn't even recognize it as a qualcomm qdloader 9008 controller.
I have seen this mode for this phone but for the bike there are no results on the web:
https://www.youtube.com/watch?v=pRuHrK4tQrQ
I have tried all this and nothing.
1.blank flash
2.Qualcomm driver
3.mmcblk0.img on microsd card
KUSANAGUI said:
Moto g7 power XT1955-2 EDL Mode PINOUT (Emergency Download Mode) by Shorting 2 Pin Method
does anyone know how to do that?
My smartphone is briked, I can't even enter fastboot mode, and the PC doesn't even recognize it as a qualcomm qdloader 9008 controller.
I have seen this mode for this phone but for the bike there are no results on the web:
https://www.youtube.com/watch?v=pRuHrK4tQrQ
I have tried all this and nothing.
1.blank flash
2.Qualcomm driver
3.mmcblk0.img on microsd card
Click to expand...
Click to collapse
you need qualcomm's drivers for it to be recognized, if you have the, and when you plug your phone in, you hear a sound (connecting a device), you're on the right track
now, about edl pinout, you do this on a normal usb cable, I actually peeled mine to endup remembering that usb-c works on both directions, hence not possible
there is a new bf version being used around, if you're on lunix, i could show you how to make your own
My Rm5P phone is not unlocked or rooted.But the phone is not getting detected by Android Auto of Soni XAV AX3000 Infotainment system of car.I tried by making USB Debugging On and opting for File Transfer.The USB cable used to connect is the original one supplied with the box. But the Soni system says USB device is not detected.But the laptop detects the phone with the same USB cable.I tried with other phones namely Nokia, Samsung,Oppo etc with this same USB cable.They all are getting detected and Android Auto is working smoothly.The problem is with Realme 5 Pro only.I want to rectify this.Can anyone help me to get Android Auto detecting my Rm5P?
I've the same problem.
Did you manage to get it solved?
It can be caused by the usb cable?
Is it solved
Is it solved, please reply with solution
It is solved? How do you know this?
Today started working.
I've use an original cable from Samsung, but I don't know if the problem was the cable or something else
yo para que me conecte, tengo que conectarlo como transferencia de datos.