hi
today i reflashed the cm boots everything a'|nd i forgot to install camera mod and i go to power off and then i tried to power on but doesn't the battery was at 80% i connected to charger but the led diode on ,nothing,i tried to pc but tells me usb device not recognized i tried to install the drivers on my win10 but doesn't works driver in win10....
can someone help me ,please...
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
raptax said:
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
Click to expand...
Click to collapse
but everything worked fine+ mine has been rooted,detects like usb device not recognized
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
raptax said:
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
Click to expand...
Click to collapse
i downloaded the drivers but doesn't install it....,and detect like usb device not recognized..
i tried,installed the drivers,but nothing usb device is not recognized
Solved i Hard resetted and Works..................
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Arwinne1 said:
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Click to expand...
Click to collapse
i think the same,i solved...,i wait for about 10 hrs and press power on button and volume up and the phone started up...
so i had back the same problem turn off by twrp but doesn't won't to power on+ my power button not work..i opend the phone remove the battery and again turn but doesn't works..led works...but on pc usb device not recognized
so today my pc has recognized my device like Qualcomm HS-USB QDLoader 9008 (COM3) can anyone help me?
Use the Mobile upgrade to reset the phone ! This is like me but now the Mobile upgrade can't restore my phone !
the mobile upgrade doesn't work with macedonian models/....
edit:repaired with downlaod mode and panasonic firmware i will write guide
Related
I installed it and rebooted my Samsung Relay and the screen went black. I pressed the power button and nothing happened.
The phone is now officially a paperweight. Also I had root privileges.
Can you help me please, I do not know what to do?:crying:
CIAWA
That app hasn't been updated since 2010. Wow.
Sent from my SGH-T699 using Tapatalk
Have you done a battery pull?
DOMF said:
Have you done a battery pull?
Click to expand...
Click to collapse
yes, I tried the battery pull without success.
if I try the shortcut keys + power button doesn't start.
without battery, the LED turns red.
if I connect it to the pc windows 7 tries to install a drive with no success.
I would like to buy a "Module USB JIG" to start it in download mode smartphone but for the Relay doesn't exist.
Please can you solve this problem?
P.S.
Sorry for my bad english
if I connect to the PC, without battery, I recognize it as "QHSUSB_DLOAD"
In "Devices and Printers" window "Qualcomm HS-USB QDLoader 9008 (COM8)"
I purchased a USB JIG Module, Monday I should get.
Has anyone experienced a similar situation?
for posterity: USB JIG.. fail
CIAWA
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
chinitool said:
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
Click to expand...
Click to collapse
try restoring nandroid backup from cwm if you have created one.
eddiebigmouth said:
try restoring nandroid backup from cwm if you have created one.
Click to expand...
Click to collapse
is not possible because not enter recovery mode
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
nicholas said:
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
Click to expand...
Click to collapse
in another, no. but if I made a partition and install windows 7. because when I had that the above operating Sintema and now I have windows 8.1. equally before attempting this update had istalado istalar Sony PC Companion with all drivers
is known about this? http://forum.xda-developers.com/showpost.php?p=49715447&postcount=13
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
Hi mate, am in exact same situation as yours.
Did you have any luck fixing it?
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
sid_844 said:
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
First of all thanks for your reply.
I have seen this thread but as you can see to uninstall the old driver I need to:
' Go to Device Manager, right click on the bricked USB device (QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008) and go to Properties, click on Driver, then select Uninstall. Check the box to remove driver files, if prompted...'
But the device is not seen by the device manager.
Someone suggested in an other thread that I need just to press (not hold) power + volume button.
I will try that and let you know.
By the way what is 'test mode'?
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
hello ,
my opo is hard bricked whn i press any key ..nothing happs.. pressing down power and vol up nothing happs, ... i searched and found out the way to get back my opo to normal but whn i connect my opo which is now hard bricked then pc does not recognize my phn..even i drivers of it.. it says usb device not recognize.. i hv tried everything but stuck up with that .. i m not worried about hard brick.. i wil find out the way to get back it to normal.. but jst explain me how wil my pc dectect my opo as android adb
i hv pc not mac.. tried to install software but still whn i press power and vol up it gets unknown device error 43
plz help thanx
Have you tried this?
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Heisenberg said:
Have you tried this?
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
yes i hv tried this..
whn i plug my phn into pc and press vol up n power it shows forge HS USB QDloader 9008 in device manager.. whn i try to update driver it says problem encountered while installing.. qualcomm drivers are not getting installed..
First, I would like to request to use full words in any international forum when you replies, not like hv,whn,phn,vol,n... etc. these seems vague and unprofessional behavior.
I think you should uninstall all the existing ADB and USB drivers and then just only install adb-setup-1.4.2.exe, and SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe (you can get by googling). These will let you work for any existing,non-existing drivers for OPO and then you may move further.
Regards
Girish Sharma
Hey i don't know if you've solved this problem yet or not, but if your device can't even be detected like mine was at one point - get the OnePlus One Recovery Tool - it worked for me, I tried everything driver-wise and I just used this. It was pretty easy
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851