Everything I've done as need sp flashtoolem, at the end of the show, a green check mark.
I disconnected the phone, try on and a button. Nothing responds to the charger, USB cable, or turning on Power.
After connecting the computer it does not detect it. Only when I press the volume down without batteries -It then begins installing drivers but every now and then connects to and disconnects the wilderness as a button hangs up pretty. On the Windows7 installs drivers and any Alcatel is device manager tab network adapters.
Under Windows XP, as the same thing I'll do is I choose the drivers and install mtk usb driver or something like that.If I hold the button volume down sees it but every now and then hangs up and connects. Turn on the SP flash rom going and what I did not press does not react, just as without battery and vol -, the program reacts goes red bar and pops up an error
bromine error s_ft_enable_dram_fail (4032)
I tried this rom with Jiayu Poland and pulled like Stocka F1WW-20140714-200639 -PC-update-foreign language
Previously , he was compiling 20150426 ,Nowhere can I find such romu
So much is happening with the phone. More I can not demented and I do not want him quite a blow.
ps. sorry for my English
No one can help? Where to find this rom?
Related
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
Hi mate, am in exact same situation as yours.
Did you have any luck fixing it?
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
sid_844 said:
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
First of all thanks for your reply.
I have seen this thread but as you can see to uninstall the old driver I need to:
' Go to Device Manager, right click on the bricked USB device (QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008) and go to Properties, click on Driver, then select Uninstall. Check the box to remove driver files, if prompted...'
But the device is not seen by the device manager.
Someone suggested in an other thread that I need just to press (not hold) power + volume button.
I will try that and let you know.
By the way what is 'test mode'?
hi guys, (LG-P920 is my Phone)
yesterday i installed ROM MANAGER to install CWRMOD (or something like that).
Then i choose my Phone Type and flashed it. After that my phone permanent restarts in 1 second,
showing LG Logo and restart, restart restart nonstop.
I understand that i ****ed it up with flashing that recovery mod. So i decided to Plug into my PC
and install everything new, but when i connect my phone to PC , it detects a unknown device every second and does it permanently too. I tried the "Battery out, Volume Button UP and connect" trick, then it stops acting weird but my PC
dont recognise my phone as OMAP, it is just an unknown device
What should i do guys? i tried installing LG Support Tool, LG Mobile Driver, and i read all the Instruction to UNBRICK your phone.
But all the Instruction starts with a successful regocnition of OMAP driver, but my PC dont even recognise it as OMAP.
PLS HELP
ok i fixed it, it was a really complicated move to 0.1 sec click that omap and install while my Phone was permanent restarting.
Somehow I have managed to brick my new cubot S550.
I wanted to update the rom so I headed to needarom and downloaded the appropriate rom and followed the instructions but somewhere along the line by pressing the vol keys and the power key the screen has gone black. This was done before I used any flash tools or install any drivers.
when I did plug it into the computer it was initially being seen as an unknown device but now I managed to install some drivers and it shows up as mediatek DA USB VCOM (android) (COM 5) I can install other drivers such as mediatek PreLoader USB VCOM Port and MTK USB Port and they seem to install but only after I untick show compatible hardware. When that is ticked then only mediatek DA USB VCOM shows in the list so I assume the state it is in is mediatek DA USB VCOM (android) (COM 5).
Unfortunately when I follow the instructions on needarom it throws up the error message S_COM_PORT_OPEN Fail(1013) so the flash tool obviously cannot communicate with the phone. This is the same even if I install the drivers as mediatek PreLoader USB VCOM.
The instructions on needarom are sort of wrong anyway because it instructs you to remove the battery etc but it is not a phone that has a removable battery.
I have two main questions.
How can I update the rom or failing that how can I get it off this black screen? I have tried different version of pressing the power button and vol keys and nothing is working.
Famineuk said:
Somehow I have managed to brick my new cubot S550.
I wanted to update the rom so I headed to needarom and downloaded the appropriate rom and followed the instructions but somewhere along the line by pressing the vol keys and the power key the screen has gone black. This was done before I used any flash tools or install any drivers.
when I did plug it into the computer it was initially being seen as an unknown device but now I managed to install some drivers and it shows up as mediatek DA USB VCOM (android) (COM 5) I can install other drivers such as mediatek PreLoader USB VCOM Port and MTK USB Port and they seem to install but only after I untick show compatible hardware. When that is ticked then only mediatek DA USB VCOM shows in the list so I assume the state it is in is mediatek DA USB VCOM (android) (COM 5).
Unfortunately when I follow the instructions on needarom it throws up the error message S_COM_PORT_OPEN Fail(1013) so the flash tool obviously cannot communicate with the phone. This is the same even if I install the drivers as mediatek PreLoader USB VCOM.
The instructions on needarom are sort of wrong anyway because it instructs you to remove the battery etc but it is not a phone that has a removable battery.
I have two main questions.
How can I update the rom or failing that how can I get it off this black screen? I have tried different version of pressing the power button and vol keys and nothing is working.
Click to expand...
Click to collapse
Hi,
I had a quite similar problem. I tried to flash recovery with SP flash tool, but nothing happened. Eventually I gave up and tried to turn on the phone without success. So I charged the phone for a while and tried several combinations of holding power and volume up button for a while, also without success. It turned out that it did not charge at all. Strangely enough the following worked:
Connect the phone to a charger -> Press Power and Volume up -> Unplug charger while holding Power and Volume up
This launched the bootloader. After a few seconds it turned off again. But now I was able to charge the phone again and after a short while the regular charging icon appeared. Now I can boot it up as usual.
Hopefully it works for you as well!
My lenovo a3300 was flashed few months ago due to some rom problem by service center (and it was showing rooted while I checked using few apps).
Yesterday I tried to upgrade my firmware(available in phone update) but while restarting, it showed the boot screen and then I tried reboot now option. But then No command and a lied down android bot appeared.
None of the other option worked, and after 30-45min the screen became off and from then showed nothing. I have tried every possible button configuration but they failed.
I have inserted it into computer and system recognized it as a "MTP USB device" under portable device(win 8.1) .
But today it showed the start screen too(finally, hope ) and I tried to reboot it by holding the power button. But the same screen returned after a vibration.[it used to vibrate when switching on]. When I right clicked the "MTP USB device" It was showing update driver, uninstall etc.
But after I tried to reboot(also after disconnecting and reconnecting it) , there are only one option i.e. "Scan for Hardware change".
I have the sp flash tool and the stock rom from xda site. I have also installed VCOM driver (android gadget vcom driver) but while flashing the download is not starting, though no error or popup showed.
How I can get my tab work again? pleaaaseee help
Thanks in advance
My phone hanged during watching then it's switched off after 3 mins, then I was trying to switched on 2 times , it only wakes up in hanged condition then switched off again, then I tried all key to boot up but nothing is worked,
Then I watched on YouTube that their is problem in touch screen connection, I checked it but won't works, then I tried to sp flash tool but my device doesn't detect, I tried so many times with various flash tool and mtk drivers , nothing get helpful
Windows 10 OS
Mtk windows 10 vcom drivers
Mt6795 Scatter file
Plz give me some suggestions?
Premombale11 said:
My phone hanged during watching then it's switched off after 3 mins, then I was trying to switched on 2 times , it only wakes up in hanged condition then switched off again, then I tried all key to boot up but nothing is worked,
Then I watched on YouTube that their is problem in touch screen connection, I checked it but won't works, then I tried to sp flash tool but my device doesn't detect, I tried so many times with various flash tool and mtk drivers , nothing get helpful
Windows 10 OS
Mtk windows 10 vcom drivers
Mt6795 Scatter file
Plz give me some suggestions
Click to expand...
Click to collapse
Try windows 7 x86 edition (32-bit)
There's problem with MTK drivers and detection of some MTK chipset phones on Win 10
Install drivers by MTK driver auto installer file or install PDA.net software and allow installation of drivers by it.
You'll surely get your phone detected on your laptop and on SP Flash tools
Plz upvote (or press thanks) the answer if you find it helpful.
Remove screen conector from pcb. Then disconnect battery, then reconnect battery, Connecticut phone to charger and leave IT for half of hour. Then disconnect from charger, connect screening and start your phone.